EX8000-6
EX-6 series
HYDRAULIC EXCAVATOR
Model Code : EX8000-6
Engine Gross Power : 2 x 1 450 kW (2 x 1 940 HP)
Operating Weight : Loading Shovel : 811 000 kg
Loading Shovel Bucket : Heaped : 40.0 m3
Ultra Large Sized Production
from the Hitachi Gigantic
Excavators
The Hitachi Giants Yield Amazing
Mining Production…
Setting a New Standard
Note: Photos in this brochure may include optional equipment.
They may also include custom-made options to meet specific user needs.
2
3
SOLUTION
GIANT
Giant-Sized Productivity
Based on Hitachi's
Theory of Evolution.
Each Hitachi generation listens
to the needs of the work site
and gives birth to an even-better
new generation.
Powerful Engines— Ready for the task.
Time-proven twin Cummins diesel engines produces a total of 2 X 1 450 kW
(2 X 1 940 HP) for handling the big excavation jobs.
• 2 x 1 450 kW (2 x 1 940 HP)
Emission Control Engine— Helping to protect our environment.
Conforms to U.S. EPA Tier II emission regulations.
Efficient E-P Control— Adjusts power output to the work being performed.
Hitachi's computer-aided Engine-Pump Control (E-P Control) coaxes optimum
efficiency from the engines and hydraulic pumps. This innovative system senses load
demand and controls engine and pump output for maximum operating efficiency.
Flow-Assisting Circuit— Allows dynamic actions.
Using the meter-in valves, ample-capacity makeup valves, and flow-assisting pumps, the flow
speed is increased in cylinders for dynamic
actions. Especially, between dumping and
digging.
Larger Bucket Provides High Work Capacity.
• Loading shovel bucket : 40.0 m3
Maximum Excavating Force.
• Crowding force : 2 870 kN (293 000 kgf)
• Breakout force : 2 230 kN (227 000 kgf)
Large Bucket— Designed to enhance efficiency.
The large bucket has been shaped specifically to
enhance scooping and
Tilt angle
loading operations.
Its sharp tilt angle
helps boost operating
70
efficiency.
Bucket Passes to Dump Trucks
HITACHI
EH5000
286 tonnes
Nominal Payload
2:1
Load Capacity (SAE
Heaped)
Loading Shovel
4
40.0 m3
196 m3
4
5
SOLUTION
GIANT
Rigid Box Design— Resists bending
and twisting forces.
More Than Durable
Just Plain Tough
Built-in toughness means the
Hitachi will continue to get
giant-sized jobs done fast.
Solid Cast Track Frame— More strength
for this key area.
Rugged Lower Rollers, Track Links
and Drive Tumblers— Help to boost
durability at rough tough work sites.
Constant Correct Track Tension—
Nitrogen gas accumulators absorb
abnormal track tension.
Strategically Positioned Oil Coolers—
Helps keep oil temperatures lower.
Helps prevent abnormal track tension
from causing damage. Travel is
automatically stopped if accumulator
pressure exceeds a preset level.
At this time, alert information and
countermeasures are indicated on the
multi-display monitor.
Computer-assisted analysis was
used to check that the frame box can
withstand heavy-duty excavation work.
6
The track frame
is cast as a
Track
frame
solid unit and
includes a flange
for improved
reliability. This
non-welded design is used exclusively
on large Hitachi models.
Lower rollers,
track links and
drive tumblers are
newly designed to
sustain the giant
body for increased
durability and
serviceability.
Flow-Retarding Control at Cylinder
Stroke Ends— Improves controllability
with longer service life.
When nearing 30 cm ahead of the
cylinder stroke end, the flow and
pressure are reduced to retard the
cylinder movement. This helps reduce
impact at the stroke end to increase
controllability and to extend service life.
This mechanism is provided for arm/
bucket roll-in and roll-out.
Three oil coolers are used for optimal
cooling efficiency. They are positioned
far from the engine radiator for even
better cooling potential.
High-Pressure Filter— Provides clean oil.
Hydraulic oil is filtered at high pressure to
remove damage-causing contaminants.
This filter is positioned down-line from
the pumps to help prevent damage in the
rare event of pump failure. Positioned for
easy maintenance.
7
Efficient Cab Layout— All controls
within natural reach of operator.
The ergonomic layout of the cab means
the operator will do less stretching and
reaching when operating the controls.
This adds up to less operator fatigue
and greater operating efficiency.
Intelligent Multi-Display Monitor
provides machine data and operating
status at a glance.
Electric Joystick Levers— Provides
pleasant control with less fatigue.
Electric joystick control levers have a
feather-touch allowing long periods of
effortless operation. Its stroke is much
shorter than that of hydraulic control.
Air Suspension Seat with Auto Operator
Weight Adjuster.
The operator seat cushion can
automatically be adjusted according to
the operator weight. This is convenient
for a machine operated by two or more
operators.
Adjustable Sliding Cockpit— Moves to
the best position for the operator.
GIANT
Designed to Offer Comfort
and Intelligence
Comfortable operator space
and simplified maintenance,
backed by Hitachi technologies
and experience.
High Visibility 9.0 Meter Cab Height—
Providing a clear view of the work area.
Rugged Comfortable Cab— Protects the operator from
falling objects.
Gives the operator a clear view, even
when a large 300 tonnes class dump
truck is being loaded. This high height
and forward-sloping cab provides a
view that boosts productivity.
Fluid filled elastic mounts help absorb vibration to
provide durability and a comfortable ride. The top
guard, conforming to OPG* level II (ISO), is provided on
the cab roof.
*Operator Protective Guard
Plenty of Utility Space— Allows full
24-hour operation.
Constant-Cab-Comfort Air Conditioner—
Keeps the cab pressurized to keep out
dust while maintaining comfortable
temperature.
The operator can monitor machine
conditions and operating status with
a 10.5-inch color LCD. The controller
provides instant fault diagnosis through
all sensors, displaying warnings and
countermeasures if failure arises.
Major Functions:
•Multiple meters, and alert symbols
indication
•Alert/failure status, and countermeasures
indication
•Snap-shot function that stores operating
data, including fiveminute operating
data immediately before alerting,
and succeeding one-minute data
(temperatures, pressures, and more)
•Setting oil change intervals with alerting
Much more functions are provided to
ease maintenance and servicing.
Outside Cameras (Optional)— Enhances
operator's visibility.
1 800 mm
1 100 mm
SOLUTION
The operator can adjust the position of
the levers and the seat to custom fit his
size and operating style.
* Illustration shows a sample of the Emergency
Switch.
Plenty of utility space is provided
behind the operator seat to hold a
table, electronic oven, and refrigerator.
This allows a full 24-hour operation for
higher productivity.
The operator can
monitor around the
machine, using four
cameras (optional)
to eliminate blind
spots.
SOLUTION
GIANT
Designed to be
Maintenable
Carefully
engineered to
allow full 24-hour
operation.
Easier Access and Wide Open Service Area—
Provides the space needed for quick and easy inspection and maintenance.
The wide fender, spacious
counterweight top and central
passage give easy access
to major components for
convenience of inspection
and maintenance. This means
faster and safer inspection
and maintenance.
1
2
3
4
5
6
7
Engine × 2
Engine Radiator × 4
LTA Radiator × 4
Hydraulic Pump × 16
Engine-Pump Bulkhead × 2
Hydraulic Oil Tank
Fuel Tank
8
9
10
11
12
13
14
Control Valve × 6
High-Pressure Strainer × 16
Hydraulic Oil Cooler × 6
Hydraulic Oil Cooling Fan Motor × 3
Lubricator
Swing Device × 6
Center Joint
Folding Stairs with Wide Steps.
15
16
17
18
19
20
21
Cab
Air Filter × 4
Muffler × 4
Folding Stairs
Fan Motor x 8
Battery Unit
Reserve tank (engine oil) × 2
Reserve tank (coolant) × 2
Punp mission oil cooler × 2
24 Fuel cooler × 2
25 Engine room Cooling Fan × 2
22
23
Convenient 24 Volt DC Crane—
Helps lift important items into place
(Optional).
Contamination Sensor— Alerts the
operator of excessive contaminants in
the oil.
This is a handy item when handling
heavy tools or other items.
This system detects accumulated
contaminants that could cause
damage and alerts the operator
before
trouble
occurs.
Protective Engine and Pump
Bulkhead— Contributes to lower heat
and less potential for damage.
Steel barrier keeps these two areas
independent.
Folding stairs is designed for easy
access to the machine for servicing and
maintenance.
Low Maintenance Dust Ejector—
Automatically expels dust from the air
cleaner.
Auto Lubrication System— Eliminates
the need for manual lubrication.
This is one less time-consuming
task during routine maintenance.
This system automatically
lubricates the front joint pins
and swing circle. This eliminates
cumbersome
daily lubrication. A spare pump
is provided standard for the auto
lubrication system.
The Centralized Lubrication System:
Fast Filling System
Easy Bucket Tooth Replacement—
This area is designed to be easily
maintained.
Innovative bucket tooth and
shrouds are used to cut
maintenance time.
10
MIC Mining
SATELLITES
(Option)
The MIC Mining
comprises the
DLU (Datalogging unit) on
the machine DLU
continuously
records
performance of
the engine and the
hydraulic system.
The record can be
download by PC
and PDA*.
MACHINE
DATA Logger
DLU
PC & PDA
Download
via Cable
INTERNET
PDA*
Download Program
[Server]
Upload
via Internet
Transmit Downloaded Data
MMS
Upon Request
PC
Data Viewer Program
Customer Dealers
Reports
* Personal Digital Assistant
11
SPECIFICATIONS
WORKING RANGES
ENGINE
Model .......................... Cummins QSKTA60-CE
Rated power
SAE J1995, gross ... 2 x 1 450 kW (2 x 1 940 HP)
at 1 800 min-1 (rpm)
Net .......................... 2 x 1 450 kW (2 x 1 940 HP)
at 1 800 min-1 (rpm)
Piston displacement .... 2 x 60 L
Fuel tank capacity ....... 14 900 L
Meter
20
18
16
14
G
H
12
HYDRAULIC SYSTEM
10 E
Main pumps ................ 16 variable-displacement, axial piston
pumps for front attachment, travel and
swing
Pressure setting .......... 29.4 MPa (300 kgf/cm2)
Max. oil flow ................ 16 × 500 L/min
8
6
E'
EH5000
4
2
0
Ground Line
A
2 F
Swing speed ............... 3.2 min-1 (rpm)
4
C
B
6
7
UPPERSTRUCTURE
D
20 18 16 14 12 10
UNDERCARRIAGE
8
6
4
2
0 Meter
Travel speeds .............. High: 0 to 2.0 km/h
Low : 0 to 1.4 km/h
Maximum traction force ... 3 000 kN (306 000 kgf)
Grade ability ................ 60 % (30 degree) max.
Loading Shovel
A Min. digging distance
7 200 mm
B Min. level crowding distance
11 100 mm
C Level crowding distance
5 600 mm
D Max. digging reach
18 500 mm
E Max. cutting height
20 500 mm
E' Max. dumping height
13 800 mm
F Max. digging depth
4 100 mm
G Working radius at max.
dumping height
10 900 mm
H Max. bucket opening width
2 800 mm
Crowding force (SAE)
2 870 kN (293 000 kgf)
Breakout force (SAE)
2 230 kN (227 000 kgf)
WEIGHTS AND GROUND PRESSURE
Loading Shovel
Equipped with 40.0 m3 (heaped) bottom dump bucket.
Shoe type
Shoe width
Operating weight
Ground pressure
Triple
grousers
1 850 mm
811 000 kg
244 kPa
(2.49 kgf/cm2)
LOADING SHOVEL ATTACHMENTS
Boom and arm are of all-welded, low-stress, high-tensile strength
steel full-box section design.
DIMENSIONS
Unit: mm
10 670
R 8 280
8 010
9 900
9 000
3 430
1 250
6 800
8 650
1 850
7 900
10 500
These specifications are subject to change without notice.
Illustrations and photos show the standard models, and may or may not include optional equipment,
accessories, and all standard equipment with some differences in color and features.
Before use, read and understand the Operator’s Manual for proper operation.
Hitachi Construction Machinery Co., Ltd.
www.hitachi-c-m.com
KS-EN125
08.11 (SA / HP, MT3)
Printed in Japan
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement