PV Electronics SixNix Nixie Clock Assembly Instructions And User Guide

Below you will find brief information for Nixie Clock SixNix. The Nixie Clock SixNix is a compact clock that uses IN-16 nixie tubes to display the time in either 12 or 24 hour mode. The clock also features a display of the date, an alarm, a programmable snooze period, and a supercapacitor backup that keeps the time during short power outages. It also features programmable night mode for dimmed or blanked display and programmable leading zero blanking.

PDF Download
Document
Nixie Clock SixNix Assembly Instructions And User Guide | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • 12 or 24 hour mode
  • Date display
  • Alarm
  • Snooze period
  • Supercapacitor backup
  • Programmable night mode
  • Programmable leading zero blanking

Frequently asked questions

From time display mode, press and hold the 'SET' button for 2 seconds until the seconds digits are highlighted. Press the 'ADJ' button to reset seconds to zero. Briefly Press 'SET' again and the hours will be highlighted. Press the 'ADJ' button to set the minutes. Briefly Press 'SET' again and the hours will be highlighted. Press the 'ADJ' button to set the hours. Proceed in this fashion to set the calendar: Year, Month and Day. Finally, briefly Press 'SET' again to revert to normal clock operation.

Press the 'ALARM' Button. The seconds digits show the on / off status of the alarm: 00 or 01 (off or on). Set on / off status, then minutes followed by hours by using the 'ALARM' and 'ADJ' buttons. When set, the alarm LED will also light.

The indicator LED will be ON if the clock has synchronised in the last two hours; slowly flashing if the last synchronisation was between 2 hours and 24 hours ago; and off if the last synchronisation is older than 24 hours.
Preparing document for printing…
0%