HSP-2403-3MGH - Pressure Washer

HSP-2403-3MGH - Pressure Washer
PARTS LIST FOR
HSP-2403-3MGH
(After Serial #26203)
HONDA OIL GRADE:
HONDA OIL CAPACITY:
PUMP OIL GRADE:
PUMP OIL CAPACITY:
FUEL NOZZLE:
BTU INPUT:
PRESSURE NOZZLE SIZE:
©Copyright 2001, Mi-T-M Corporation
SAE 10W-30
20 OZ.
Mi-T-M PUMP OIL AW-4085-0016
14 OZ.
1.25 60°B DELAVAN
205,000 / HOUR
3.0
1
EX-9124-103000
This Parts Listing has been compiled for your benefit. You can be assured your hot water pressure washer was constructed and designed with quality and
performance in mind. Each component has been rigorously tested to insure the highest level of quality.
The contents of this Parts Listing are based on the latest product information available at the time of publication. The manufacturer reserves the right to make
changes in price, color, materials, equipment, specifications or models at any time without notice.
WARNING
THIS IS A PROFESSIONAL HIGH PRESSURE, HOT WATER PRESSURE WASHER. CAUTION SHOULD BE OBSERVED WHEN USING
OR REPAIRING THIS UNIT! READ AND FOLLOW THE SAFETY WARNINGS LISTED BELOW BEFORE ATTEMPTING ANY REPAIRS ON
THIS PRESSURE WASHER!
SAFETY WARNINGS
1.
NEVER alter or modify the equipment. Be sure any accessory items and system components being used will withstand the pressure developed. Use
only genuine manufacturer parts for repair of your pressure washer. Failure to do so can cause hazardous operating conditions and will VOID
warranty.
2.
NEVER make adjustments on machinery while the unit is connected to the engine without first removing the ignition cable from the spark plug.
Turning over the machinery by hand during adjustment or cleaning might start the engine and machinery with it, causing serious injury to the operator.
3.
4.
5.
Know how to stop and bleed pressures quickly. Be thoroughly familiar with controls.
Before servicing the unit, turn unit off, relieve the water pressure and allow the unit to cool down. Do not make repairs while the unit is running.
Service in a clean, dry, flat area. Block the wheels to prevent the unit from moving. Be especially careful to properly dispose of any flammable
materials.
After testing the machine, DO NOT leave the pressurized unit unattended. Shut off the unit and release trapped pressure before leaving.
Table of Contents
SPECIFICATIONS ................................................................................................................................................................................................................................ 3
FLOW CHART ...................................................................................................................................................................................................................................... 4
EMF SYSTEM ....................................................................................................................................................................................................................................... 4
GENERAL THEORY OF OPERATION ................................................................................................................................................................................................... 5
DECAL PLACEMENT ........................................................................................................................................................................................................................... 6
UNLOADER (850-0252) ....................................................................................................................................................................................................................... 16
PRESSURE SWITCH (22-0171) ........................................................................................................................................................................................................... 18
DETERGENT INJECTOR (50-0052) ...................................................................................................................................................................................................... 20
COIL DRAIN PLUG (850-0218) ............................................................................................................................................................................................................ 21
HEAT EXCHANGER/EMF SYSTEM ..................................................................................................................................................................................................... 22
BOILER ASSEMBLY (850-0224) .......................................................................................................................................................................................................... 24
GUN (850-0179) & ADJUSTABLE PRESSURE DUAL LANCE (850-0185) ............................................................................................................................................ 26
FUEL TANK (850-0214) ........................................................................................................................................................................................................................ 28
FUEL PUMP (3-0129) .......................................................................................................................................................................................................................... 30
FUEL SOLENOID (44-0098) ................................................................................................................................................................................................................. 31
EMF SYSTEM (850-0239) .................................................................................................................................................................................................................... 32
WIRING SCHEMATIC .......................................................................................................................................................................................................................... 34
WIRING DIAGRAM .............................................................................................................................................................................................................................. 35
©Copyright 2001, Mi-T-M Corporation
2
EX-9124-103000
SPECIFICATIONS
HSP-2403-3MGH
MODEL NUMBER
Operating Pressure (PSI/Bar):
Water Volume (GPM/lpm):
Outlet Water Temperature (F/C):
Engine:
Horsepower
Engine Type
Oil Type
Oil Capacity (oz./liter)
Low Oil Protection
Fuel Type
Fuel Capacity (gal./liter)
Starting
Maximum No Load RPM
High Pressure Pump:
Oil Type
Oil Capacity (oz./liters)
Plungers
Manifold
Valves
Unloader
Inlet Water Strainer
Heat Dump Valve
Detergent Injector:
Burner Fuel System:
HSP-2403-3MGH
2400/ 165 (+/- 5%)
2.3/8.7 (+/- 5%)
130 F/ 54 C (+/- 20 F) rise above inlet ambient (210 F/ 99 C maximum)
Honda
6.5
Four Stroke, Overhead Valve, Single Cylinder
SAE10W-30
20/.6
Oil Alert
Unleaded Gasoline 86 Octane Minimum
.95/3.6
Recoil Rope
3600 (+/- 100)
Direct Driven, Oil Bath, Triplex Piston
Mi-T-M Pump Oil #AW-4085-0016
14/.41
Ceramic
Forged Brass
Stainless Steel
Preset
Removable Clear Bowl for inspection and cleaning of Stainless Steel Screen
Relieves heated water during unloader bypass stage
Adjustable Low Pressure downstream from pump
Fuel Type
Fuel Capacity (gal./liters)
Fuel Filter/ Water Separator
Fuel Pump
Fuel Pressure (PSI/ BAR)
Fuel Nozzle
Fuel Consumption (GPH/ LPH)
Electro Magnetic Firing (EMF) System:
No.1 or No.2 Fuel Oil, Diesel or Kerosene
4/15
Spin on (10 micron) filter/ E-Z water drain
Two Line, Single Stage
145/10
1.25 60 B Delavan
1.48 GPH Continous Burning
Belt Driven (Patent Pending)
Transistorized Magneto
12 Volt DC
Forced Air
Vertical, Top fired, Dual Spiral Coil
205,000
80-83% with #2 Fuel Oil/ Diesel
0-3 per ASTM D2156
Ignition
Control Voltage
Blower
Heat Exchanger:
BTU Input
Efficiency
Smoke Density
Controls:
On/ Off Switch
Pressure Switch
High Limit Switch
Fuel Solenoid:
Safety Relief:
Unit Net Weight (Lbs/kg):
Unit Shipping Weight (Lbs/kg):
Unit Net Dimension (In/cm):
Unit Shipping Dimension (In/cm):
©Copyright 2001, Mi-T-M Corporation
Industrial grade cam switch
Shuts off burner fuel supply upon trigger release
Shuts off burner fuel supply when outlet water temp. exceeds 210 F/ 99 C
12 Volt
Relieves excess system pressure
269/122
385/175
37.5Lx29.5Wx37.5H/95Lx75Wx95H
46.5Lx31.5Wx48.5H/118Lx80Wx123H
3
EX-9124-103000
EMF SYSTEM
©Copyright 2001, Mi-T-M Corporation
OMHSP008-012494-BAR
OMHSP091-120998-BAR
FLOW CHART
4
EX-9124-103000
GENERAL THEORY OF OPERATION
WATER FLOW: Connect a pressurized water source to the INLET GARDEN HOSE CONNECTION (1) and turn on the water
supply. The water will flow through a WATER STRAINER (2) which has a clear inspection bowl.
The water then travels into the TRIPLEX HIGH PRESSURE PUMP (3) which has an UNLOADER (4) that bypasses the water
when the trigger gun is closed. To protect the pump from heated water during this bypass stage, a HEAT DUMP VALVE (5) will
open at 140°F/60°C allowing the heated water to escape. The Heat Dump Valve automatically resets when the water cools. The
PRESSURE SWITCH (6) controls the fuel supply to the burner.
When using detergents, the solution passes through the DETERGENT STRAINER (7) located on the DETERGENT HOSE (8).
The detergent solution then travels into the ADJUSTABLE LOW PRESSURE DETERGENT INJECTOR (9).
From there, the water may be allowed to flow out of the DRAIN PLUG (10) or through the HEAT EXCHANGER INLET (11) where
it is heated when the burner is on. As the water exits the HEAT EXCHANGER OUTLET (12), it enters a safety system which
protects the operator from danger. The safety system contains a HIGH TEMPERATURE LIMIT SWITCH (13) which senses the
water temperature and shuts off the fuel supply to the burner if it gets too hot. If the unloader fails to by pass the water or the
burner remains on when the trigger gun is closed, the SAFETY RELIEF (14) will relieve and allow water to exit safely.
The heated water then flows through the HIGH PRESSURE HOSE (15) and to the TRIGGER GUN ASSEMBLY (16) which allows
the operator to control the water spray. When the trigger gun is open, the water flows through the ADJUSTABLE PRESSURE
DUAL LANCE (17) and exits the NOZZLE (18).
FUEL FLOW: The Fuel Pump draws fuel from the FUEL TANK (19) through a replaceable FUEL FILTER/WATER SEPARATOR
(20) and into the FUEL PUMP (21). Fuel exits the fuel pump, into a FUEL SOLENOID VALVE (22) which controls fuel flow to the
FUEL NOZZLE (23) where it ignites and burns in the heat exchanger.
EMF SYSTEM: The patent pending Electro Magnetic Firing (EMF) System is an integrated system which gives all the requirements for combustion.
The BELT (1) from the power source turns the HUB (2) which has two EXTERIOR MAGNETS (3) attached. As these magnets
spin past the IGNITION MODULE (4), a magnetic flux is created from which the ignition module produces a high voltage. This
voltage arcs across the electrodes giving the spark that is needed for ignition.
This hub has an INTERNALLY MOUNTED MAGNET (5) which spins past a STATOR (6) that produces the voltage that controls
the fuel supply to the heat exchanger. In addition to this, the hub also spins the BLOWER FAN (7) that forces the air into and
through the heat exchanger.
The FUEL PUMP (8) is also connected the hub by means of a flexible coupler.
©Copyright 2001, Mi-T-M Corporation
5
EX-9124-103000
HSP-2403-3MGH-022399-BAR
DECAL PLACEMENT
©Copyright 2001, Mi-T-M Corporation
6
EX-9124-103000
HSP-2403-3MGH-022399-BAR
DECAL PLACEMENT
REF. #
©Copyright 2001, Mi-T-M Corporation
DESCRIPTION
PART #
1
Decal- Wa rni ng : Don’t Modify Plumbing (E/S) (See 34-9001)
N/A Sep.
1
2
Decal- Clear Laminate
N/A
1
3
Decal- Data Plate
N/A
1
4
Serial Number
N/A
1
5
Decal- Wa rni ng : Hot Coil Exhaust (E/S) (See 34-9001)
N/A Sep.
1
6
Decal- Allow to Cool (E/S) (See 34-9001)
N/A Sep.
1
7
Decal- Hot Surface (E/S) (See 34-9001)
N/A Sep.
1
8
Decal- Risk of Fire (E/S) (See 34-9001)
N/A Sep.
1
9
Decal- Wa rni ng / Caution/ Operation (E/S) (See 34-9001)
N/A Sep.
1
10
Decal- Stripe
34-0560
1
11
Decal-White Die Cut
34-0711
1
12
Plastic Mi-T-M Logo
62-0087
1
Safety Decal Kit (Includes 1, 5-9)
34-9001
7
QTY.
EX-9124-103000
HSP096-022999-BAR
FRAME
©Copyright 2001, Mi-T-M Corporation
8
EX-9124-103000
HSP096A-022299-BAR
FRAME
REF. #
DESCRIPTION
PART #
QTY.
REF. #
5-9002A01
1
16
DESCRIPTION
PART #
QTY.
High Pressure Hose Assembly
15-0199
1
1
Frame Assembly
2
Wheel
14-0017
4
17
High Pressure Hose Assembly
15-0194
1
3
Jam Nut
30-0117
4
18
Bolt
27-9525
4
4
Bolt
27-9524
12
19
Hex Nut
30-3023
6
5
Flatwasher
28-0022
10
20
Engine/ Pump Assembly (See exploded drawing)
N/A Sep.
1
6
Fuel Tank Assembly (Includes 7, 8)
850-0214
1
21
Fuel Line
33-0217
1
7
Fuel Cap
12-0033
1
22
Hood Assembly
850-0164
1
8
Plug
23-0296
1
23
Screw Cover
62-0057
1
9
Fuel Hose
15-0147
2
24
Screw Connect
17-0035
1
10
Heat Exchanger/ EMF System Assembly (See exploded drawing)
N/A Sep.
1
25
Hose Assembly
15-0146
1
11
Bolt
27-0526
2
26
Gun/ Lance Assembly
850-0179
1
12
Hose *(Two Feet Required)
15-0007
1
27
Dual Lance Assembly- 36"
850-0185
1
13
Hose Clamp
42-0011
2
28
Nozzle- 1503
18-0053
1
14
Unloader/ Manifold Assembly (See exploded drawing)
N/A Sep.
1
29
Nozzle- 4060
18-0110
1
15
Hex Nut
30-0157
2
©Copyright 2001, Mi-T-M Corporation
*Must Order in One Foot Lengths
9
EX-9124-103000
OMHSP087-083101-DLG
ENGINE/ PUMP ASSEMBLY
©Copyright 2001, Mi-T-M Corporation
10
EX-9124-103000
OMHSP087-083101-DLG
ENGINE/ PUMP ASSEMBLY
REF. #
DESCRIPTION
PART #
QTY.
REF. #
DESCRIPTION
PART #
QTY.
1
Hose Gasket
26-0001
1
18
Hose *(Two Feet Required)
15-0007
1
2
Hose Swivel
23-0095
1
19
Hose Clamp
42-0011
1
3
Strainer Complete (Includes 4-7)
19-0096
1
20
Elbow
23-0119
1
4
Strainer Bowl
19-0103
1
21
Plug
23-0244
1
5
Screen
19-0104
1
22
High Pressure Hose
15-0194
1
6
Strainer Gasket
25-0056
1
23
Elbow
23-0034
1
7
Strainer Body
19-0105
1
24
Bolt
27-0118
4
8
Heat Dump Valve
22-0208
1
25
Lockwasher
29-0008
4
9
High Pressure Pump
3-0193
1
26
Flatwasher
28-0023
4
10
Flange/ Pump Adapter
38-0054
1
27
Bolt
27-8432
4
11
Belt
11-0037
1
28
Key
43-0073
1
12
Sheave
10-0076
1
29
Screw
27-3093
2
13
Bolt
27-0418
4
30
Muffler Deflector
45-0053
1
14
Adapter Plate
38-0044
1
31
Muffler Guide
21-0099
1
15
Bolt
27-0091
1
32
Engine- 6.5 H.P. Honda
1-0088
1
16
Lockwasher
29-0007
1
17
Flatwasher
28-0003
1
©Copyright 2001, Mi-T-M Corporation
* Must Order in One Foot Lengths
11
EX-9124-103000
3-0193-021301-RD
HIGH PRESSURE PUMP (3-0193)
©Copyright 2001, Mi-T-M Corporation
12
EX-9124-103000
3-0193-021301-RD
HIGH PRESSURE PUMP (3-0193)
REF.
DESCRIPTION
PART #
QTY.
REF.
DESCRIPTION
PART #
QTY.
REF.
DESCRIPTION
PART #
QTY.
1
Bolt
27-8432
4
19
Plunger Rod
46-0722
3
37
Support Ring (See 70-0182)
N/A Sep.
3
2
Flange
46-0715
1
20
Washer
28-1027
3
38
O-ring
25-0372
1
3
Oil Seal
26-0192
1
21
O-ring
25-0371
3
39
Plug
39-0088
1
4
Retaining Ring
46-0667
1
22
Piston
46-0723
3
40
Manifold
46-0730
1
5
Bearing
48-0059
1
23
Washer
26-0187
3
41
Valve Cap
39-0087
6
6
Set Screw
27-8886
1
24
Nut
30-6016
3
42
O-ring
25-0160
6
7
Crankshaft
46-0718
1
25
Oil Dipstick
39-0090
1
43
Single Valve Assembly (Inc. 44-48) (See 70-0161)
N/A Sep.
6
8
Plug
39-0086
1
26
Crankcase
46-0724
1
44
O-ring (See 70-0161)
N/A Sep.
6
9
O-ring
25-0325
3
27
Bearing
48-0063
1
45
Valve Seat (See 70-0161)
N/A Sep.
6
10
Bolt
27-8888
6
28
Retaining Ring
46-0732
1
46
Valve Plate (See 70-0161)
N/A Sep.
6
11
Crankcase Cover
46-0719
1
29
Retaining Ring
46-0676
1
47
Valve Spring (See 70-0161)
N/A Sep.
6
12
O-ring
25-0370
1
30
Bearing Cap
46-0725
1
48
Valve Cage (See 70-0161)
N/A Sep.
6
13
O-ring Sight Glass
46-0670
1
31
Oil Seal
26-0193
3
49
Bolt
27-8875
8
14
Reflector
46-0824
1
32
O-ring
25-0399
3
50
Lockwasher
29-0153
8
15
Retainer
46-0671
1
33
Retainer
46-0726
3
51
Plug
39-0097
1
16
O-ring
25-0398
1
34
Low Pressure Seal (See 70-0181)
N/A Sep.
3
Seal Kit (3 each 32, 34, 36)
70-0181
17
Connecting Rod
46-0720
3
35
Packing Retainer
46-0728
3
Support Rings (3 each 37)
70-0182
18
Piston Pin
46-0721
3
36
V-Packing (See 70-0181)
N/A Sep.
3
Valve Kit (6 each 44-48)
70-0161
©Copyright 2001, Mi-T-M Corporation
13
EX-9124-103000
OMHSP088-032900-BAR
UNLOADER/ MANIFOLD ASSEMBLY
©Copyright 2001, Mi-T-M Corporation
14
EX-9124-103000
OMHSP088-3MDL-032900-BAR
UNLOADER/ MANIFOLD ASSEMBLY
REF. #
DESCRIPTION
PART #
QTY.
1
Elbow
23-0119
1
2
Hose Clamp
42-0011
1
3
Hose *(Two Feet Required)
15-0007
1
4
Pressure Switch
22-0171
1
5
High Pressure Hose Assembly
15-0194
1
6
Manifold Block
51-0025
1
7
Hex Nipple
24-0010
1
8
Plug
23-0238
1
9
Unloader Assembly
850-0252
1
10
Detergent Stainer
19-0050
1
11
Detergent Hose *(Six Feet Required)
15-0021
1
12
Detergent Injector
50-0052
1
13
Elbow
23-0307
1
14
High Pressure Hose Assembly
15-0199
1
*Must Order in One Foot Lengths
©Copyright 2001, Mi-T-M Corporation
15
EX-9124-103000
OMGEN163-101298-BAR
UNLOADER (850-0252)
©Copyright 2001, Mi-T-M Corporation
16
EX-9124-103000
OMGEN163-101298-BAR
UNLOADER (850-0252)
REF. #
DESCRIPTION
PART #
1
Hex Nut
8-0362
2
2
Cover
7-0098
1
3
Set Screw
27-4280
1
4
Adjusting Insert- Brass
8-0363
1
5
Adjustment Nut
8-0364
1
6
Set Screw
8-0365
1
7
Glide Ring
8-0366
1
8
Spring
49-0104
1
9
Hex Nut
8-0367
1
10
Bushing
8-0368
1
11
Unloader Body
8-0369
1
12
Retainer
8-0269
1
13
Valve Housing
8-0104
1
14
Spring
49-0023
1
15
Valve
8-0105
1
16
O-ring
25-0036
1
17
Cylinder Pin
8-0372
1
18
Piston Repair Kit
70-0243
1
19
Spacer
8-0371
1
20
Stop Nut
8-0157
1
21
Washer
29-0154
2
Check Valve Repair Kit (Includes 13-16)
70-0244
Unloader Complete
©Copyright 2001, Mi-T-M Corporation
QTY.
850-0252
17
EX-9124-103000
22-0171/22-0243-120799-BAR
PRESSURE SWITCH (22-0171)
©Copyright 2001, Mi-T-M Corporation
18
EX-9124-103000
22-0171-120799-BAR
PRESSURE SWITCH (22-0171)
REF. #
DESCRIPTION
1
Pressure Switch
2
PART #
22-0171
1
Screw
N/A
4
3
Cover
N/A
1
4
O-ring (See 70-0306)
N/A Sep.
1
5
Micro Switch
N/A
1
6
Retainer Clip
N/A
1
7
Body
N/A
1
8
O-ring (See 70-0306)
N/A Sep.
2
9
Back-up Ring (See 70-0306)
N/A Sep.
1
10
Piston
N/A
1
11
Washer
N/A
1
12
Spring
49-0144
1
13
Washer
N/A
1
14
Plastic Housing
N/A
1
15
O-ring (See 70-0306)
N/A Sep.
1
16
Nut
N/A
1
17
Wire Assembly
N/A
1
O-ring Repair Kit (Inc. 4, 8-9, 15)
©Copyright 2001, Mi-T-M Corporation
QTY.
19
70-0306
EX-9124-103000
OMGEN284-052898-DCE
DETERGENT INJECTOR (50-0052)
OMGEN284-052898-DCE
DETERGENT INJECTOR (50-0052)
REF. #
DESCRIPTION
1
Orifice (2.1mm)
2
Injector Body
3
20
QTY.
50-0057
1
N/A
1
Spring (See 852-0056)
N/A Sep.
1
4
Ball (See 852-0056)
N/A Sep.
1
5
O-ring (See 852-0056)
N/A Sep.
1
6
Piston Retainer
50-0156
1
7
Spring
49-0056
1
8
O-ring (See 852-0056)
N/A Sep.
1
9
Adjustable Shutter Barb
50-0157
1
10
Adjustment Knob
50-0158
1
Injector Repair Kit (Includes 3-5, 8)
©Copyright 2001, Mi-T-M Corporation
PART #
852-0056
EX-9124-103000
COIL DRAIN PLUG (850-0218)
850-0218-041597-BAR
COILDRAINPLUG (850-0218)
850-0218-041597-BAR
REF. #
©Copyright 2001, Mi-T-M Corporation
21
DESCRIPTION
PART#
QTY.
1
Bolt
27-9526
1
2
RetainingCable
33-0260
1
3
SnapRing
33-0261
1
4
HandWheel
16-0239
1
5
Plug
24-0147
1
6
Back-upRing
25-0424
1
7
O-ring
25-0423
1
EX-9124-103000
OMHSP086-011602-RD
HEAT EXCHANGER/EMF SYSTEM
©Copyright 2001, Mi-T-M Corporation
22
EX-9124-103000
OMHSP086-011602-RD
HEAT EXCHANGER/ EMF SYSTEM
REF. #
©Copyright 2001, Mi-T-M Corporation
DESCRIPTION
PART #
QTY.
REF. #
DESCRIPTION
PART #
QTY.
1
Boiler Assembly Complete
850-0224
1
29
Tensioner Base
10-0071
1
2
EMF Assembly
850-0239
1
30
Bolt
27-9526
2
3
Hex Nut
30-3022
2
31
Beltguard- Black
20-0366A01
1
4
Fuel Pump Coupler
33-0225
1
32
Connector
23-0291
1
5
Nut
30-0159
3
33
Solenoid- 12 Volt
44-0098
1
6
Flatwasher
28-0022
1
34
Elbow
23-0249
1
7
Adjustable Sheave Shaft Assembly (Inc. 5, 8, 9)
850-0167
1
35
Bolt
27-9528
4
8
Sheave Assembly
850-0177
2
36
Terminal Stripe *(One Foot Required)
32-0394
1
9
Pulley
33-0221
1
37
Switch Cam
32-0399
1
10
Bolt
27-9524
11
38
Cover Electric Box- Black
20-0357A01
1
11
Bracket/ Fuel Pump- Black
20-0353A01
1
39
Backplate Electric Box- Black
20-0356A01
1
12
Hex Nut
30-3023
8
40
Electrical Locknut
32-0292
1
13
Bracket- Black
20-0360A01
2
41
Strain Relief
9-0046
1
14
Fuel Line
33-0217
1
42
Screw
27-3062
1
15
Elbow
23-0248
1
43
Cable Clamp
32-0428
1
16
Fuel Hose
15-0147
2
44
High Pressure Hose Assembly
15-0199
1
17
Connector
23-0247
2
45
Coil Inlet Connector Assembly
850-0225
1
18
Fuel Pump
3-0129
1
46
Nipple
24-0122
2
19
Filter Fuel Water Seperator
19-0070
1
47
Elbow
23-0034
1
20
Fuel Water Seperator Replacement Bowl
19-0071
1
48
Adapter
23-0279
1
21
Fuel Water Seperator Replacement Filter
19-0053
1
49
Drain Plug Assembly
850-0218
1
22
Hex Nipple
23-0250
1
50
High Limit Switch Probe
32-0421
1
23
Hex Nut
30-0010
1
51
Pressure Relief Valve
22-0273
1
24
Plate- Black
20-0363A01
1
52
Adapter Coil Outlet
23-0369
1
25
Pin
33-0211
1
53
Coil Outlet Assembly
850-0251
1
26
Hex Nut
30-0157
2
54
Hex Reducer
23-0197
1
27
Tensioner Sheave Shaft Assembly (Inc. 5, 8, 28)
850-0166
1
28
Shaft
33-0212
1
23
*Must Order in One Foot Lengths
EX-9124-103000
BOILER ASSEMBLY (850-0224)
850-0224-052998-BAR
OMHSP071-082698-BAR
ELECTRODE GAP SETTINGS
©Copyright 2001, Mi-T-M Corporation
24
EX-9124-103000
850-0224-052998-BAR
BOILER ASSEMBLY (850-0224)
REF. #
DESCRIPTION
PART #
QTY.
REF. #
DESCRIPTION
PART #
QTY.
1
Hex Nut
30-6004
2
17
Top Pan
20-0323
1
2
Plug
24-0034
1
18
Bolt
27-8806
3
3
Heat Exchanger Assembly
20-0348A01
1
19
Bolt
27-8805
1
4
Bolt Hex Head
27-8879
2
20
Support Plate
33-0183
1
5
Air Diverter Plate
20-0454A01
1
21
Nozzle Holder
33-0182
1
6
Air Diverter Stem Assembly
20-0377A01
1
22
Electrode
32-0377
2
7
Lockwasher
28-1009
1
23
Washer
28-1007
2
8
Nut
30-6001
1
24
Electrode Mounting Plate
33-0180
1
9
Insulation
33-0267
1
25
Bolt
27-8807
1
10
Washer
28-0521
2
26
Snap Ring
25-0290
1
11
Heat Exchanger Coil Assembly
66-0010
1
27
Sight Glass
33-0179
1
12
Pan Assembly (Includes 13-28)
70-0184
1
28
Bolt
27-8803
3
13
Exhaust Pan
20-0324
1
29
Fuel Nozzle
18-0310
1
14
Heat Deflector
20-0325
1
30
Nut
30-6002
3
15
Nut
30-6001
6
31
Washer
28-1028
3
16
Lockwasher
28-1009
3
850-0224
1
©Copyright 2001, Mi-T-M Corporation
Boiler Assembly Complete (Inc. 1-28, 30, 31)
25
EX-9124-103000
OMGEN256-101700-RD
GUN (850-0179) & ADJUSTABLE PRESSURE DUAL LANCE (850-0185)
©Copyright 2001, Mi-T-M Corporation
26
EX-9124-103000
0MGEN256-HSP-1502/2403-101700-RD
GUN/WAND (850-0179) & ADJUSTABLE PRESSURE DUAL LANCE (850- 0185)
REF. #
DESCRIPTION
PART #
QTY.
REF. #
DESCRIPTION
PART #
1
Gun w/Lance Assembly (2-29)
850-0179
1
2
Screw
27-8382
3
Plug (See 70-0057)
4
29
Lance Holder (See 850-0179)
N/A Sep.
1
13
30
Adjustable Dual Lance Assembly (Includes 31-51)
850-0185
1
N/A Sep.
1
31
Handle Plug
16-0312
1
O-ring (See 70-0057)
N/A Sep.
1
32
Hex Nut
30-3002
1
5
Spring (See 70-0057)
N/A Sep.
1
33
Handle
16-0313
1
6
Ball (See 70-0057)
N/A Sep.
1
34
Washer
28-1021
1
7
Seat (See 70-0057)
N/A Sep.
1
35
Hex Nut
30-3010
1
8
O-ring (See 70-0057)
N/A Sep.
1
36
Hex Adapter
23-0271
1
9
Pin (See 70-0057)
N/A Sep.
1
37
O-ring
25-0351
1
10
Washer (See 70-0057)
N/A Sep.
1
38
Piston Stem
16-0314
1
11
O-ring (See 70-0057)
N/A Sep.
1
39
Back-up Ring
25-0352
1
12
Back-up Ring (See 70-0057)
N/A Sep.
1
40
O-ring
25-0353
1
13
Housing
23-0295
1
41
Upper Protector
16-0315
1
14
Plastic Housing (Left Side)
16-0336
1
42
Lower Protector
16-0316
1
15
Pipe
21-0095
1
43
Body
23-0272
1
16
Nipple
23-0174
1
44
Screw
27-8862
1
17
Trigger Safety Lock
16-0332
1
45
Lance w/Protective Cover
16-0328
2
18
Trigger Rest
16-0333
1
46
Hex Nut
30-3060
2
19
Trigger
16-0335
1
47
Pipe Clamp
16-0318
2
20
Trigger Pin
43-0069
1
48
Screw
27-8861
2
21
Plastic Housing (Right Side)
16-0334
1
49
Nipple
24-0127
2
22
Guard Lance (Right Side) (See 70-0324)
N/A Sep.
1
50
Nozzle Protector
16-0319
1
23
Pipe
16-0277
1
51
Nozzle-4060
18-0110
1
24
Adapter
16-0283
1
52
Nozzle-1503
18-0053
1
25
Guard Lance (Left Side) (See 70-0324)
N/A Sep.
1
Gun Repair Kit (Includes 3-12)
70-0057
26
Plug
39-0076
1
O-ring Kit (Includes 37, 39, 40)
70-0143
27
Screw
49-0103
1
Plastic Housing Kit (Includes 2, 22, 25, 26)
70-0324
28
Spacer
16-0282
1
©Copyright 2001, Mi-T-M Corporation
27
QTY.
EX-9124-103000
850-0214-121797-BAR
FUEL TANK (850-0214)
©Copyright 2001, Mi-T-M Corporation
28
EX-9124-103000
850-0214-34-9001-121797-BAR
FUEL TANK (850-0214)
REF. #
©Copyright 2001, Mi-T-M Corporation
DESCRIPTION
1
Fuel Tank Assembly (Inc. 2-8)
2
PART #
QTY.
850-0214
1
Plug
23-0296
1
3
Fuel Tank (See 850-0214)
N/A Sep.
1
4
Elbow
23-0237
1
5
Fuel Pick-up Line
33-0270
1
6
Flare
23-0247
1
7
Decal-Warning-Risk of Fire (E/S) (See 34-9001)
N/A Sep.
1
8
Vented Fuel Cap
12-0033
1
Safety Decal Kit (Includes 7)
34-9001
29
EX-9124-103000
FUEL PUMP (3-0129)
0MHSP018-041597-BAR
FUEL PUMP (3-0129)
OMHSP018/040694/BAR
REF. #
©Copyright 2001, Mi-T-M Corporation
30
DESCRIPTION
1
Fuel Pump Complete (Includes 2-8)
2
PART #
QTY.
3-0129
1
Cover Screw
46-1006
4
3
Cover-Left Hand
46-1018
1
4
Strainer
19-0034
1
5
Cover Gasket
26-0109
1
6
Plug
24-0044
3
7
Body
N/A
1
8
Plug
24-0082
1
EX-9124-103000
FUEL SOLENOID (44-0098)
0MHSP013-44-0098-121698-BAR
FUEL SOLENOID (44-0098)
OMHSP013A-121698-BAR
REF. #
©Copyright 2001, Mi-T-M Corporation
31
DESCRIPTION
PART #
QTY.
1
Solenoid Complete-12V
44-0098
1
2
Solenoid Body
46-1013
1
3
Solenoid Piston
46-1012
1
4
Solenoid Base
46-1014
1
5
Screw (See 44-0098)
N/A Sep.
2
6
Solenoid Coil-120V
46-1015
1
7
Spring (See 44-0098)
N/A Sep.
1
8
Piston Nut
46-1016
1
9
Din Connector Cord
32-0443
1
EX-9124-103000
850-0239-113099-BAR
EMF SYSTEM (850-0239)
©Copyright 2001, Mi-T-M Corporation
32
EX-9124-103000
850-0239-113099-BAR
EMF SYSTEM (850-0239)
REF. #
©Copyright 2001, Mi-T-M Corporation
DESCRIPTION
PART #
QTY.
1
EMF Assembly Complete (Inc. 2-17)
850-0239
1
2
Blower Flange Assembly (Inc. 3-6)
850-0162
1
3
Sealed Bearing
48-0041
2
4
Blower Flange
38-0040
1
5
Spacer
33-0206
1
6
Blower Shaft
20-0347
1
7
Woodruff Key
43-0080
2
8
Cable Clamp
32-0403
1
9
Screw
27-2070
1
10
Stator Coil
850-0189
1
11
Screw
27-0740
4
12
Flange Magnet Hub
38-0041
1
13
Hex Nut
30-0177
2
14
Bolt
27-8898
2
15
Flatwasher
28-0002
2
16
Ignition Coil Assembly
850-0161
1
17
Blower Fan
44-0105
1
18
Set Screw
30-3021
1
33
EX-9124-103000
OMHSP014A-072996-JTR
WIRING SCHEMATIC
©Copyright 2001, Mi-T-M Corporation
34
EX-9124-103000
OMHSP014-072996-JTR
WIRING DIAGRAM
©Copyright 2001, Mi-T-M Corporation
35
EX-9124-103000
©Copyright 2001, Mi-T-M Corporation
36
EX-9124-103000
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement