PDF - Nitto Kohki Deutschland GmbH

PDF - Nitto Kohki Deutschland GmbH
Tk126
Pneumatic, Electric & Hydraulic
BORING
POWER TOOLS &
MACHINE TOOLS
GENERAL CATALOG
PUNCHING
SCALING
CHAMFERING
GRINDING
FILING
DEBURRING
CONTENTS
Product Line
Boring
Atra Ace ---------------------- 5
Punching
Selfer ------------------------- 17
Pump ------------------------- 17
Handy Selfer ---------------- 19
Chamfering
Beveler ----------------------- 25
Scaling
Air Chipper ----------------- 30
Auto Chisel ------------------ 31
Super Kelen ----------------- 32
Jet Chisel -------------------- 33
Grinding &
Sanding
Myton ------------------------ 35
Belton ------------------------ 37
Grinding &
Sanding
Free Sander ----------------- 41
Line Sander ----------------- 42
Orbital Sander ------------- 43
Palm Orbital Sander ------ 43
Air Sonic -------------------- 44
Filing
Super Hand ----------------- 45
Micro Air Hand ------------ 47
Deburring
Burr Cutter ------------------ 47
Cutting
Super Saw ------------------ 48
Drilling
Air Drill ---------------------- 48
Suspending
Spring Balancer ------------ 49
Needles
Needles for Jet Chisel ----- 34
Grinding &
Sanding Discs
Grinding & Sanding
Discs for Myton ------------ 36
Abrasive Belts
Abrasive Belts for
Belton -------------------- 38,40
Consumables
Annular
Cutters
Broach Cutters & Broach
Holders ---------------------- 15
Punches &
Dies
Punches & Dies for
Selfer ------------------------- 20
Indexable
Inserts
Indexable Inserts for
Beveler ----------------------- 29
Green Procurement
Nitto Kohki has made every effort in developing "Environmental Improvement Plans" through the implementation of
ISO14001, to execute environmentally conscious business activities on a company-wide basis. As a part of our
ongoing commitment to the environment, we are also commited to reduce and/or exclude restricted chemical
substances from our products as designated by RoHS directives, laws and regulations of chemical susbtances.
Check out our video gallery to see our products at work.
www.nitto-kohki.co.jp/e/prd/pv/tool/
Click on a product picture.
1
Click on "Movie"
You can also view this
on your smartphone or tablet.
High-End Features of Atra Ace Drilling Machines
High-End Features of Atra Ace Drilling Machines
Enhance Your Productivity and Safety
Ref. No.
Features
1
Auto-feed
2
Slow Start Mechanism
3
Step Feed
4
Variable Automatic Feed
5
Load Sensor
6
Magnet Open-circuit Sensor
7
Fail-safe Restart
8
Built-in Motion Sensor
9
Overload Stop
10
Cycle Stop
11
Unique Battery Conservation
12
One-touch Cutter Replacement
QA-4000
QA-6500
WA-3500 WA-5000 WOJ-3200 AO-5575
LO-3550 CLA-2720
A-100
1. Automatic control & feed are activated by simply pushing the feed handle to engage the clutch.
2. The feed speed is reduced for the first few seconds after boring begins to ensure a smooth cut through the mill scale.
3. When the cutter has become dull or it cuts through difficult materials, the load sensor will automatically activate the Step Feed Program
to help penetrate material. When working on deep holes or large diameter holes, the Step Program will also help to reduce swarf build
up around the cutter as the waste material will break off with each Step cycle.
4. The feed speed is continuously monitored and updated proportionally to the load on the cutter.
5. QA-4000/QA-6500 : The sensing system responds to driling forces on the cutter for the optimum cutting condition.
WA-3500/ WA-5000 : The dual sensing system responds to both drilling and feeding forces on the cutter for the optimum cutting
condition.
6. The drill will not start until the magnetic field is active.
7. QA-4000/QA-6500/ WA-3500/ WA-5000/ WOJ-3200/AO-5575/LO-3550 : The drill will not re-start even if power is re-supplied after
accidental shutdown. Drilling can only be continued after turning on the drill switch.
CLA-2720 : If the battery pack is replaced/removed whilst both the magnet and the drill motor switch are in the on position, the drill
will not operate until both switches are reset.
8. QA-4000/QA-6500/ WA-3500/ WA-5000 : If any lateral movement or excess vibration is detected, both the drill and the feed motor stop.
AO-5575/CLA-2720 : If any lateral movement or excess vibration is detected, the drill motor stops.
9. QA-4000/QA-6500/ WA-3500/ WA-5000 : When an excessive load is applied to the cutter, both the drill and the feed motor will stop
automatically.
WOJ-3200/AO-5575/LO-3550/CLA-2720/A-100 : When an excessive load is applied to the cutter, the drill motor will stop automatically.
10. QA-4000/QA-6500 : After the cut has finished, a detector responds to the reduction in load, the drill retracts quickly and then both the
drill and feed motor automatically stop.
WA-3500/ WA-5000 : After the cut has finished, a detector responds to the reduction in load and both the drill and the feed motor
automatically stop.
11. While the drill motor is running, if no load is applied within 10 seconds, the drill will stop automatically to save the battery.
12. Replacement is quick and easy with our unique push fit self-centering cutter system.
2
Atra Ace Specifications
CLA-2720
LO-3550
WA-3500
WA-5000
Specifications
Model
LO-3550
Battery
220 - 240
V AC,
50/60 Hz
Rated Power Consumption W
324
800
Rated Current
A
18
3.3
min-1(rpm)
430
950
950
350 / 650
Magnet Power Consumption W
18
35
34
75
Max. Hole Diameter
27
35
35
50
Max. Plate Thickness
20
50
35
75
Electric Drill
CLA-2720
Power Source
(Single Phase)
Hole Capacity
No-load Speed
One-touch Hole Diameter
mm
Type
Plate
Thickness
JETBROACH
mm
Twist Drill
220 - 240
V AC,
50/60 Hz
220 - 240 V AC,
50/60 Hz
110 - 120 V AC,
50/60 Hz
1100
10.2
1150
5.4
10.8
5.1
17.5 to 27
12 to 35
17.5 to 35
12 to 17
17.5 to 50
12 to 17
17.5 to 50
6 to 12
6 to 20
6 to 50
9 to 50
9 to 50
9 to 75
9 to 50
9 to 75
-
-
-
-
-
-
-
-
12 to 15
16 to 27
-
14 to 35
14 to 50
6 to 12
6 to 20
-
9 to 25
9 to 50
Hole Diameter
mm
-
-
-
-
mm
60
80
83
107
5500 (561)
5500 (561)
7056 (720)
9800 (1000)
65 x 126
65 x 145
92 x 213
101 x 201
Max. Stroke
Magnet Holding Power
Magnet Dimensions
N(kgf)
mm
Power Cord Length
m
-
3
3
3
Mass (Weight)
kg
7
8.7
20
23
Manual
Manual
Automatic
Automatic
5
7
9
9
Feeding
Page
3
110 - 120
V AC,
50/60 Hz
WA-5000
12 to 17
Side-lock Hole Diameter
mm
Type
JETBROACH Plate Thickness
mm
One-touch Hole Diameter
mm
Type
HI-BROACH Plate Thickness
mm
WA-3500
Atra Ace Specifications
WOJ-3200
AO-5575
WOJ-3200
110 - 120 220 - 240
V AC,
V AC,
50/60 Hz 50/60 Hz
QA-6500
AO-5575
110 - 120 V AC,
50/60 Hz
680
6.1
5.4
10.8
QA-6500 A-100
220 - 240 V AC,
50/60 Hz
1150
4.3
A-100
QA-4000
220 - 240 V AC,
50/60 Hz
110 - 120 V AC,
50/60 Hz
950
8.6
QA-4000
3.0
220 - 240 220 - 240
V AC,
V AC,
50/60 Hz 50/60 Hz
1010
1600
4.5
7.4
350/650
750
400/750
330
50
50
75
80
32
55
40
65
100
50
75
35
50
75
870
38
30
12 to 32
12 to 17
17.5 to 55
12 to 17
17.5 to 55
17.5 to 40
17.5 to 65
-
9 to 50
9 to 50
9 to 75
9 to 50
9 to 75
9 to 35
9 to 50
-
-
-
-
-
50 to 100
-
-
-
-
13 to 75
-
12 to 50
14 to 15
16 to 18
14 to 15
16 to 18
18 to 35
-
-
9 to 50
9 to 12
9 to 25
9 to 12
9 to 25
9 to 25
-
Max. 13
-
-
-
-
130
105
75
88
122
9000 (918)
10000 (1020)
6664 (680)
9800 (1000) 17640 (1800)
99 x 177
86 x 170
82 x 172
100 x 200 130 x 256
3
3
13
18
Manual
11
4
5
5
5
18.5
26
50
Manual
Automatic
Automatic
Manual
11
13
13
14
4
BORING
Portable Magnetic Base Drilling Machine
Compact and cordless operation,
powered by a rechargeable lithium-ion battery.
ATRA ACE manual feed
Model
• Weighs only 7 kg with battery installed
• Compact size allows drilling in tight spots
CLA-2720
• Max. 27 mm dia. x 20 mm deep
Specifications
Model
Voltage
Battery Pack (Lithium-ion Battery)
min-1(rpm)
No-load Speed
Hole
Cutter
Capacity One-touch Type JETBROACH 25L
mm One-touch Type JETBROACH 35L
One-touch Type HI-BROACH 25L
293 mm
N(kgf)
Magnet Holding Power
mm
Magnet Dimensions
mm
Cutter Position Pivot Side to Side
Ajustment
Straight Front to Back mm
kg
Mass (Weight)
CLA-2720
18 V DC
NBL18006 (18V 4.0 Ah)
430
Plate Thickness
Hole Diameter
6 to 12
12 to 17
6 to 20
17.5 to 27
6 to 12
12 to 15
6 to 20
16 to 27
5500 (561)
65 x 126
10
10
7*
*Including Battery Pack and Feed Handle
NC14435
Battery Charger
Power Source
Charging Time
Chargeable Battery Pack
220 - 240 V AC
90 min*
NBL18006 (18 V 4.0 Ah)
*In case of a full charge from an empty battery. However, it can be charged up to 95%
in 45 min.
199 mm
151 mm
Accessories Included
• 3 mm Hex. Socket Screw Key
• 4 mm Hex. Socket Screw Key
• Hex. Socket Head Cap Screw 5 x 12
• Hex. Socket Head Set Screw 8 x 28
• Spanner 8 x 10
• Guard
• Safety Strap
• Carry Case
• Cutting Oil 0.5L
• Jet Oiler No.3013
• Tube 4 x 7 mm, 1 m Long
• Handle
• Battery Charger
• 2 pieces of Battery Pack 18V NBL18006
• Blade
TOP-LEVEL SAFETY
Optional Accessories
Highly Sensitive Sensor Equipped
Ref. No.
PN
1
2
3
4
TB01507
TB09657
TB04374
TB07696
Side slip and inclination detected by a built-in sensor
Self-check Function
Description
The machine checks for faults itself
Highly Advanced Energy-Saving
1
Sales Unit
Cutting Oil 2L
Oil Tank Ass’y
Supporting Magnet Ass’y
Pipe Attachment Ass’y
One-touch Type JETBROACH 25L, 35L
One-touch Type HI-BROACH 25L
2
3
4
Magnetic Force Control Function
The magnet force is automatically reduced
when the drill is not running.
Soft Start Function
The large electric current on start-up is prevented
by starting the electric drill gently.
Automatic Drill Stop and Warning Function
Unnecessary operations are eliminated.
Lithium-ion batteries are required to be recycled;
never discard a lithium-ion battery in the waste.
Please contact your local sales office or community
recycling program for information on properly
disposing of lithium-ion batteries.
5
Reversible Feed Handle
Feed handles can be positioned on the right or left side
for ease of drilling and mounting in confined spaces.
1 piece
BORING
CLA-2720 LED Indication Light Safety Features
LED INDICATION – Battery level and Motor load can be monitored while drilling
LED Indication Light
VOLTAGE LEVEL
BATTERY
LEVEL
INDICATION
MEANING
GREEN
YELLOW
RED
RED BLINKING
3 TIMES*
3 TIMES*
3 TIMES*
CONTINUOUS
BATTERY
FULL
PARTIALLY
CHARGED
REQUIRE
CHARGING
BATTERY
LEVEL LOW
*After turning on the magnet switch the light flashes 3 times with the color according to the battery level, then the light will turn green
and the tool is ready for use. If the light flashes red 3 times or continuously, replace the low battery pack with a charged battery pack.
ELECTRIC CURRENT OF THE ELECTRIC DRILL
Efficient Load
“Caution” If an excessive
load
is
maintained
during the cut, the motor
will shut-off to prevent
damage or injury to the
operator.
Caution
MOTOR
LOAD
INDICATION
MEANING
GREEN
YELLOW
LIGHT LOAD
MEDIUM LOAD
SLIDE SLIP
DETECTION
BLUE
BLINKING
When a slide slip is
detected, the blue light
will flash and the Motor
will stop automatically.
RED BLINKING
OVERLOAD
GREEN
BLINKING
(WHITE)BLINKING
MOTOR STOPPED
BY OVERLOAD
SAFET
Y
While the electric drill is running, if no
load is applied for 7 seconds, the green
light will flash. After another 3 seconds
without load, the electric drill will be
stopped automatically.
ENER
GY-SA
VING
“NO LOAD”
DETECTION
MOTOR
NOT ACTIVATED
IN TIME
RED
Chip Breaker
This chip breaker prevents the cutter
from becoming jammed with metal shavings.
After the Magnet switch is turned on, if
the Motor switch is not turned on within
10 seconds, the green light will flash.
Powered by Lithium-ion Battery
Using the Lithium-ion battery it takes about 90 minutes
for a full charge.
Sufficient charge (95%) can be achieved in just
45 minutes.
Battery Pack
Drilling Position Adjustment
After engaging the magnet, the drill position can be adjusted up to 10 mm
travel on each axis straight front to back and pivot side to side.
Battery Charger
10 m
m
m
10 m
6
BORING
Portable Magnetic Base Drilling Machine
ATRA ACE manual feed
Model
LO-3550
• Max. 35 mm dia. x 50 mm deep
Compact, light weight, low profile design
gives you greater hole making mobility
• Drilling on 100 mm or more width web and flange of wide flange beam
• Designed to improve drilling on walls, confined and elevated locations
• Drill position can be adjusted up to 10 mm travel on each axis straight
front to back and pivot side to side
Specifications
Model
Power Source (Single Phase)
W
Electric Rated Power Consumption
A
Drill
Rated Current
min-1(rpm)
No-load Speed
Hole
Cutter
Capacity One-touch Type JETBROACH 25L
mm One-touch Type JETBROACH 35L
One-touch Type JETBROACH 50L
N(kgf)
Magnet Holding Power
mm
Magnet Dimensions
mm
Cutter Position Pivot Side to Side
Ajustment
Straight Front to Back mm
m
Power Cord Length
kg
Mass (Weight)
276.2 mm
LO-3550
220 - 240 V AC, 50/60 Hz
800
3.3
950
Hole Diameter
Plate Thickness
12 to 17
6 to 25
17.5 to 35
6 to 35
12 to 35
6 to 50
5500 (561)
65 x 145
10
10
3
8.7*
*Without an electric cord and a sub handle
Accessories Included
339 mm
• Carry Case
• Cutting Oil 0.5L
• Feed Handle
• Sub Handle
• Pilot Pin 08035
• Spanner 17
• Blade
112 mm
Chip Breaker
• Hex. Socket Bolt 5 x 12
• Hex. Socket Head Set Screw 8 x 28
• 4 mm Hex. Socket Screw Key
• 5 mm Hex. Socket Screw Key
• Spanner 7 x 8
• Guard
• Safety Strap
Optional Accessories
Ref. No.
This chip breaker prevents the cutter
from becoming jammed with metal shavings.
1
7
2
3
PN
1
TB01507
2
TQ10581
3
TB01098
4
TB07306
5
TB04374
6
TB07696
*50L for stacked plates
4
5
Description
Sales Unit
Cutting Oil 2L
Jet Oiler
Tube 4 x 7 x 3000 Ass’y
Lubrication Adapter Ass’y
Supporting Magnet Ass’y
Pipe Attachment Ass’y
One-touch Type JETBROACH 25L, 35L, 50L
1 piece
6
BORING
Easy Drilling Position Adjustment
Adjustable Feed Handle
After engaging the magnet, the drill position can be adjusted up to 10 mm
travel on each axis straight front to back and pivot side to side.
The feed handle can be locked at varying angles to enhance productivity.
Pull the feed handle
to adjust the angle.
10
mm
10 mm
Light Handle Operation
Easy-to-use Switch Panel
Fast revolution of Jetbroach cutter makes less cutting resistance and
smooth handling.
On / off buttons of the magnet and the drill motor are on the front panel
and can be operated by one hand. Drilling conditions can be checked
by lamp colors.
Magnet Switch
Motor Switch
The motor switch
can be activated
after the magnet
switch is turned on.
ON
OFF
ON OFF
LED Load Indicator
The LED load display allows proper
cutting pressure adjustments.
Reversible Feed Handle
A Carrying Case Is Provided
The feed handle can be positioned on the right or left hand side for ease
of drilling and mounting in confined spaces.
The carrying case is a rugged accessory that provides a convenient
way to transport and store the LO-3550.
Optional Accessories for ATRA ACE
3LSH$WWDFKPHQW$VV·\
Supporting Magnet $VV·\
The Pipe Attachment Ass’y is an optional base to securely fasten an Atra
Ace on pipe for drilling. The chain can easily and securely fit around pipes
having an outside diameter of 48.6 to 318.5 mm.
If the accessory safety strap or chain is unable to be properly secured to
prevent the Atra Ace from falling off the workpiece, the supporting magnet
ass’y is recommended. It employs a permanent magnet and can secure the
Atra Ace even if power is interrupted.
Example of installation on a pipe
Applicable Pipe Size:
48.6 to 318.5 mm
Applicable Models when a 35 mm or 50 mm length
one touch type Jetbroach cutter is used:
CLA-2720, WOJ-3200, LO-3550, WA-3500, and QA-4000
Installation
Example
PN : TB04374
PN : TB07696
Applicable Models:
CLA-2720, LO-3550, WA-3500, WOJ-3200, AO-5575, QA-4000,
and QA-6500
8
BORING
Portable Magnetic Base Drilling Machine
High-performance feed system & high-tech components
ATRA ACE auto
• Drilling time and cutting performance are enhanced by the automatic feed function.
Model
WA-3500
Model
• Max. 35 mm dia. x 50 mm deep
WA-5000
• Max. 50 mm dia. x 75 mm deep
613 mm
535 mm
237 mm
237 mm
409 mm
425 mm
Specifications
Model
WA-3500
Power Source (Single Phase)
220 - 240 V AC, 50/60 Hz
110 - 120 V AC, 50/60 HZ
W
Electric Rated Power Consumption
1100
A
Drill
5.1
10.2
Rated Current
min-1(rpm)
No-load Speed
950
W
Magnet Power Consumption
34
Hole
Plate Thickness
Hole Diameter
Cutter
Capacity One-touch Type JETBROACH 25L
mm One-touch Type JETBROACH 35L
9 to 35
17.5 to 35
9 to 50
17.5 to 35
One-touch Type JETBROACH 50L
One-touch Type JETBROACH 75L
9 to 25
14 to 35
One-touch Type HI-BROACH 25L
One-touch Type HI-BROACH 50L
mm
Max. Stroke
83
N(kgf)
Magnet Holding Power
7056 (720)
mm
Magnet Dimensions
92 x 213
m
Power Cord Length
3
kg
Mass (Weight)
20
Accessories Included
• Carry Case
• 3 mm Hex. Socket Screw Key
• Cutting Oil 0.5L
• 8 x 10 mm Spanner
• Pilot Pin 08035
• Guard
• Side Handle
• Chain
WA-5000
220 - 240 V AC, 50/60 Hz
110 - 120 V AC, 50/60 HZ
1150
5.4
10.8
350 / 650
75
Plate Thickness
9 to 25
9 to 35
9 to 50
9 to 75
9 to 25
9 to 50
Hole Diameter
12 to 17
17.5 to 40
12 to 50
17 to 50
14 to 50
14 to 50
107
9800 (1000)
101 x 201
3
23
• Carry Case
• Cutting Oil 0.5L
• Pilot Pin 08050
• Side Handle
• 3 mm Hex. Socket Screw Key
• 4 mm Hex. Socket Screw Key
• 8 x 10 mm Spanner
• Guard
• Chain
Optional Accessories
9
Ref. No.
PN
1
2
3
4
5
TB05186
TB01507
TB04374
TB02536
TB07696
Description
Chip Breaker Ass’y
Cutting Oil 2L
Supporting Magnet Ass’y
Sleeve 6.5 for Triangle Shank Drill Bit
Pipe Attachment Ass’y
One-touch Type JETBROACH 25L
One-touch Type JETBROACH 35L
One-touch Type JETBROACH 50L
One-touch Type JETBROACH 75L
One-touch Type HI-BROACH 25L
One-touch Type HI-BROACH 50L
Sales Unit
1 piece
1 piece
1 piece
1 piece
1 piece
1 piece
1 piece
1 piece
1 piece
1 piece
1 piece
Applicable Model
WA-3500 WA-5000
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1
2
4
5
3
BORING
One-touch Cutter Replacement
Coolant into the Heart of the Cut
Improved Bearing Bracket
Replacement is quick and easy with our unique
push fit self-centering cutter system.
Coolant is fed directly to the inside of the cut.
The coolant system also features an auto shut-off.
Our precision bearing bracket aligns
cutters precisely, which increases cutter life.
Mounting the cutter
Removing the cutter
Fail-Safe Protection
Chip Breaker
Built-in Motion Sensor
This chip breaker prevents the cutter
from becoming jammed with metal shavings.
If any lateral movement or excess vibration is detected, both the drill and
the feed motor stop. Nitto Kohki is the first company to incorporate
this feature into magnetic base drills.
• Standard accessory for the WA-5000
• Optional accessory for the WA-3500
Fail-safe Restart
The drill will not re-start even if power is re-supplied after accidental
shutdown. Drilling can only be continued after turning on the drill switch.
Two Speed Selection (WA-5000)
Speed can be changed to
suit the type and size of the cutter.
350 min-1
650 min-1
Magnet Open-circuit Sensor
The drill will not start until the magnetic field is active.
New drill control prevents cutters from breaking
Slow Start Mechanism
The feed speed is reduced for the first few seconds after boring begins to ensure a smooth cut through the mill scale.
Auto-feed
Automatic control & feed are activated by simply pushing the feed handle to engage the clutch.
Auto-feed on
Feed
handle
Load Sensor
The dual sensing system responds to both drilling and feeding forces on the cutter for the optimum cutting condition.
Variable Automatic Feed
The feed speed is continuously monitored and updated proportionally to the load on the cutter.
Cycle Stop
After the cut has finished, a detector responds to the reduction in load and both the drill and the feed motor automatically stop.
Overload Stop
When an excessive load is applied to the cutter, both the drill and the feed motor will stop automatically.
10
BORING
Portable Magnetic Base Drilling Machine
ATRA ACE manual feed
Model
New generation magnetic base drilling machines help
meet productivity and safety goals.
• Advanced safety system
WOJ-3200
Model
• Max. 32 mm dia. x 50 mm deep
AO-5575
• Max. 55 mm dia. x 75 mm deep
361 mm
196 mm
611 mm
318 mm
186.5 mm
296 mm
Specifications
Model
WOJ-3200
Power Source (Single Phase)
110 - 120 V AC, 50/60 Hz
220 - 240 V AC, 50/60 Hz
W
Electric Rated Power Consumption
950
A
Drill
8.6
4.3
Rated Current
min-1(rpm)
No-load Speed
870
W
Magnet Power Consumption
38
30
Hole
Hole Diameter Plate Thickness Hole Diameter Plate Thickness
Cutter
9 to 25
12 to 17
Capacity One-touch Type JETBROACH 25L
9 to 25
12 to 17
mm One-touch Type JETBROACH 35L
9 to 35
17.5 to 32
9 to 35
17.5 to 32
9 to 50
12 to 32
9 to 50
12 to 32
One-touch Type JETBROACH 50L
One-touch Type JETBROACH 75L
One-touch Type HI-BROACH 25L
One-touch Type HI-BROACH 50L
Twist Drill
Max. 13 mm dia.
mm
Max. Stroke
130
N(kgf)
Magnet Holding Power
9000 (918)
mm
Magnet Dimensions
99 x 177
m
Power Cord Length
3
kg
Mass (Weight)
13
Accessories Included
• 3 mm Hex. Socket Screw Key
• Carry Case
• 4 mm Hex. Socket Screw Key
• Oil Tank Ass'y
• 6 mm Hex. Socket Screw Key
• Pilot Pin 08035
• 8 x 10 mm Spanner
• Sub Handle
• Guard
• 2 pieces of Hex. Socket
• Safety Strap
Head Bolt 5 x 10 mm
Optional Accessories
Ref. No.
PN
1
2
3
4
5
6
7
8
9
TB07691
TB07474
TQ10581
TB01098
TB01507
TB07696
TB04374
TB07690
TB02536
*50L for stacked plates
11
Description
Chip Breaker Ass’y
Chip Breaker Ass’y
Jet Oiler No.3013
Tube 4 x 7 x 3000 Ass’y
Cutting Oil 2L
Pipe Attachment Ass’y
Supporting Magnet Ass’y
One-touch Drill Adapter
Sleeve 6.5 for Triangle Shank Drill Bit
One-touch Type JETBROACH 25L
One-touch Type JETBROACH 35L
One-touch Type JETBROACH 50L
One-touch Type JETBROACH 75L
One-touch Type HI-BROACH 25L
One-touch Type HI-BROACH 50L
Sales Unit
1 piece
1 piece
1 piece
1 piece
1 piece
1 piece
1 piece
1 piece
1 piece
1 piece
1 piece
1 piece
1 piece
1 piece
1 piece
Applicable Model
WOJ-3200 AO-5575
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
AO-5575
110 - 120 V AC, 50/60 Hz
220 - 240 V AC, 50/60 Hz
1150
10.8
Hole Diameter
12 to 17
17.5 to 40
12 to 55
17.5 to 55
12 to 50
12 to 50
5.4
350 / 650
50
Plate Thickness Hole Diameter
12 to 17
9 to 25
17.5 to 40
9 to 35
12 to 55
9 to 50
17.5 to 55
9 to 75
12 to 50
9 to 25
12 to 50
9 to 50
105
10000 (1020)
86 x 170
3
18
• Carry Case
• Cutting Oil 0.5L
• Pilot Pin 08050
• Side Handle
• 3 mm Hex. Socket Screw Key
Plate Thickness
9 to 25
9 to 35
9 to 50
9 to 75
9 to 25
9 to 50
• 5 mm Hex. Socket Screw Key
• 8 x 10 mm Spanner
• Guard
• Chain
1
2
3
4
5
6
7
8
9
BORING
Load Detector with “Smart-Stop/Rapid-Restart” Technology
The world's first manual feed with ''Smart-Stop / Rapid-Restart'' technology for WOJ-3200 / AO-5575
This new feature is a breakthrough in the Manual drill industry. Formerly only found on high end Nitto Kohki Automatic drills, this technology displays
the current drill status via the LED Load Indicator. Customers will experience a cutting edge drill management system designed solely around saving time
and money in replacement parts and cutters in addition to reducing user fatigue and down time.
As the drilling load increases, the load indicator will change in color from green to orange to red. In addition, if excessive feeding force is applied, the load
indicator will rapidly blink red and the rotation of the drill motor will slow down and temporarily stop. If the load is released while the load indicator is
blinking red, the drill motor will resume its rotation.
LED load indicator
Safety mode
"Smart Stop"
Green
Orange
Magnet malfunction
Red
Fast Blinking Red
Proper load
Motion sensor active
Green / Orange
Overload
“Rapid-Start” resumes drilling operation
Resume proper load
Slow Blinking Red
Slow Blinking Orange
(AO-5575)
“Smart Stop” stalls motor
when overloaded.
Drill motor shuts off
Continued overload
Slow Blinking Green
Drill motor will not turn on
One-Touch Cutter Replacement
Replacement is quick and easy with
our unique push fit self-centering cutter system.
Reversible Feed Handle
Feed handles can be positioned on the right or
left side for ease of drilling and mounting
in confined spaces.
LED load indicator
Chip Breaker
This chip breaker prevents the cutter
from becoming jammed with metal shavings.
WOJ-3200
AO-5575
Two Speed Selection (AO-5575)
Speed can be changed to suit the type
and size of the cutter.
350 min-1
Mounting the cutter
Removing the cutter
Body Height Adjustment (WOJ-3200)
The use of Jetbroach cutters require the frame
to be at the lowest position, while twist bit
drilling requires the appropriate amount of
elevation to be adjusted for safe operation.
One-Touch Drill Adapter (WOJ-3200)
Optional one-touch drill adapter allows the
use of up to 13 mm twist drills to be used
in the original arbor.
650 min-1
Built-in coolant tank to protect against damage (AO-5575)
60 mm
*Twist drills are not provided
with the one-touch drill adapter.
12
BORING
Portable Magnetic Base Drilling Machine
Fully automatic drilling for increased productivity
and reduced cost
ATRA ACE quick auto
Model
• Proven Automatic Technology
(self feeding, automatic return, load detection for speed and feed regulation)
QA-4000 Non-CE
Model
• Max. 40 mm dia. x 35 mm deep
QA-6500 Non-CE
• Max. 65 mm dia. x 50 mm deep
541 mm
439 mm
215 mm
407 mm
215 mm
454.5 mm
Specifications
Model
Power Source (Single Phase)
W
Electric Rated Power Consumption
A
Drill
Rated Current
min-1(rpm)
No-load Speed
W
Magnet Power Consumption
Hole
Cutter
Capacity One-touch Type JETBROACH 35L
mm One-touch Type JETBROACH 50L
One-touch Type HI-BROACH 25L
Max. Stroke
Magnet Holding Power
Magnet Dimensions
Power Cord Length
Mass (Weight)
Accessories Included
QA-4000
QA-6500
220 - 240 V AC, 50/60 Hz
115 V AC, 50/60 HZ
220 - 240 V AC, 50/60 Hz
1010
4.5
400 / 750
75
Hole Diameter
Plate Thickness
17.5 to 40
9 to 35
17.5 to 65
9 to 50
680
3.0
6.1
750
50
Plate Thickness
9 to 35
9 to 12
9 to 25
Hole Diameter
17.5 to 40
14 to 15
16 to 18
mm
N(kgf)
mm
m
kg
18 to 35
9 to 25
88
9800 (1000)
100 x 200
5
26
75
6664 (680)
82 x 172
4
18.5
• Oil Tank Ass'y
• Cutting Oil 0.5L
• Pilot Pin 08035
• Side Handle
• 3 mm Hex. Socket Screw Key
• 4 mm Hex. Socket Screw Key
• 8 x 10 mm Spanner
• Chain
• Tool Box
• Oil Tank Ass'y
• Cutting Oil 0.5L
• Pilot Pin 08050
• Side Handle
• 3 mm Hex. Socket Screw Key
• 4 mm Hex. Socket Screw Key
• 8 x 10 mm Spanner
• Chip Stopper
• Chain
• Tool Box
Optional Accessories
Ref. No.
PN
1
2
3
TB01507
TB04374
TB07696
Description
Cutting Oil 2L
Supporting Magnet Ass’y
Pipe Attachment Ass’y
One-touch Type JETBROACH 35L
One-touch Type JETBROACH 50L
One-touch Type HI-BROACH 12L
One-touch Type HI-BROACH 25L
Sales Unit
1 piece
1 piece
1 piece
1 piece
1 piece
1 piece
1 piece
Applicable Model
QA-4000
QA-6500
•
•
•
•
•
•
Once drilling is completed and the slug is ejected from the hole, the cutting bit is
quickly retracted. This quick drill motor retraction allows the user to move onto the
next hole more quickly.
Self Feeding & Load Detection
LOAD DETECTOR
LOAD
ON
STOP
Red Green Yellow Orange Red
Limit Switch
The ATRA ACE Automatic Drills utilize a limit switch that resets the machine when it
retracts to the starting position after hole completion, also shuts down the motors in
the event of an over-travel at the bottom of the stroke.
13
2
3
•
•
•
•
•
Built-in Motion Sensor
Automatic Return
The feeding is controlled by an onboard
microcomputer. The feed rate begins slowly and then
increases to the appropriate speed for the cutter size
and load condition. The load detector clearly shows
the amount of resistance on the cutter at anytime.
1
If any lateral movement or excess vibration is detected, both the
drill and the feed motor stop. Nitto Kohki is the first company to
incorporate this feature into magnetic base drills.
Step Feed
When cutting through difficult materials, the load sensor will
automatically activate the Step Feed Program to help penetrate
material.
Chip Breaker
This chip breaker prevents the cutter
from becoming jammed with metal shavings.
BORING
Automatic-feed Hole-cutting Procedure
1
2
Align the pilot pin with the center
punch mark of the hole to be drilled.
Attach the machine to the beam with
the proper safety chain and engage
the magnet. Lower the drill down
from the top limit switch location to
the point of the pilot pin making
contact with the material and engage
the motor.
3
Engage the clutch by pushing the
handles in towards the drill and the
motor will begin feeding automatically.
ON
4
Slow start mechanism cuts smoothly
through the mill scale. Then, speed
and feed rate is controlled by the
sensors to achieve efficient drilling.
After the hole is completed, the QA
Series machines will quickly return
and stop at the top of the stroke,
ready for the next hole.
Feed Handle
One-touch Cutter Replacement
Replacement is quick and easy with our
unique push fit self-centering cutter system.
Automatic-feed Operation
Two Speed Selection (QA-6500)
Speed can be changed to suit
the type and size of the cutter.
400 min -1
750 min -1
Mounting the cutter
Portable Magnetic Base Drilling Machine
ATRA ACE manual feed
Model
Removing the cutter
The largest capacity drilling machine
in the Nitto Kohki line.
• Equipped with overload indicator with motor shut-off feature
A-100 Non-CE
• Max. 100 mm dia. x 75 mm deep
Specifications
575 mm
318 mm
705 mm
Optional Accessories
Ref. No.
PN
Description
Sales Unit
1
2
TB01507
TA99027
Cutting Oil 2L
Chain
Side-lock Type JETBROACH 75L
1 piece
1
2
Model
A-100
Power Source (Single Phase)
220 - 240 V AC, 50/60 Hz
W
Electric Rated Power Consumption
1600
A
Drill
Rated Current
7.4
min-1(rpm)
No-load Speed
330
W
Magnet Power Consumption
80
Hole
Hole Diameter
Plate Thickness
Cutter
Capacity Side-lock Type JETBROACH 75L
50 to 100 mm
13 to 75 mm
mm
Max. Stroke
122
N(kgf)
Magnet Holding Power
17640 (1800)
mm
Magnet Dimensions
130 x 256
m
Power Cord Length
5
kg
Mass (Weight)
50
Accessories Included
• Cutting Oil 0.5L
• Oil Cup Ass'y
• Pilot Pin 12075
• 3 pieces of Feed Handle
• 2 mm Hex. Socket Screw Key
• 2.5 mm Hex. Socket Screw Key
• 3 mm Hex. Socket Screw Key
• 4 mm Hex. Socket Screw Key
• 5 mm Hex. Socket Screw Key
• 6 mm Hex. Socket Screw Key
• 8 mm Hex. Socket Screw Key
• 7 x 8 mm Spanner
• Chain
• Tool Box
14
BORING
Annular Cutters
JETBROACH CUTTERS & HI-BROACH CUTTERS
BROACH CUTTERS are far better than twist drills
Test Drilling is very often the only way to determine the machinability of difficult materials.
Use a small size cutter wherever possible in order to minimize trial costs.
86 mm
65 mm(25L)
73 mm(35L)
95 mm(12 - 17 × 50L)
90 mm(17.5 - 65 × 50L)
58 mm
(20 - 52 dia.)
Specifications
mm
15
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
50
mm
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
TK00721
TK00722
TK00723
TK00724
TK00725
TK00726
TK00727
TK00728
TK00729
TK00730
TK00731
TK00732
TK00733
TK00734
TK00735
TK00736
TK00737
TK00738
TK00739
TK00740
TK00741
TK00742
TK00743
TK00744
TK00745
TK00746
TK00747
TK00748
TK00749
TK00750
TK00751
TK00752
TK00753
TK00754
TK00755
TK00756
TK00757
TK00758
TK00759
TK00760
TK00761
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
25
mm
35
mm
12
13
14
15
16
17
17.5
18
18.5
19
19.5
20
20.5
21
21.5
22
22.5
23
23.5
24
24.5
25
25.5
26
26.5
27
28
29
30
31
32
33
34
35
36
37
38
39
40
TK01148
TK01149
TK01150
TK01151
TK01152
TK01153
TK00301
TK00302
TK00303
TK00304
TK00305
TK00306
TK00307
TK00308
TK00309
TK00310
TK00311
TK00312
TK00313
TK00314
TK00315
TK00316
TK01169
TK00317
TK00318
TK00319
TK00320
TK00321
TK00322
TK00323
TK00324
TK00325
TK00326
TK00328
TK00602
TK00603
TK00604
TK00605
TK00606
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Pilot Pin
CLA-2720
QA-6500
QA-4000
WA-5000
WA-3500
PN
AO-5575
One-touch Type
mm
Depth dia.
WOJ-3200
JETBROACH
LO-3550
Pilot Pin
Pilot Pin
JETBROACH
PN
JETBROACH
06025
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
For stacked plates.
Side lock Type/ 75L
75L : 50 - 100 dia.
75L : 75 dia.
06050
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
156 mm
JETBROACH
One-touch Type
mm
Depth dia.
117 mm
One-touch Type/25,35,50L One-touch Type/50L(W) One-touch Type/75L
25L : 12 - 17 dia.
35L : 17.5 - 40 dia.
75L : 17.5 - 55 dia.
50L(W) : 18,22,24 - 26.5,
50L : 12 - 65 dia.
28,32, and 35 dia.
25L : 25 dia.
35L : 35 dia.
50L(W) : 50 dia.
50L : 50 dia.
75L : 75 dia.
0.02 - 0.1
35 - 50 (mild steel)
HI-BROACH
06025
TK00698
TK00699
TK00700
TK00701
TK00702
TK00703
TK00335
TK00336
TK00337
TK00338
TK00339
TK00340
TK00341
TK00342
TK00343
TK00344
TK00345
TK00346
TK00347
TK00348
TK00349
TK00351
TK00352
TK00353
TK00354
TK00355
TK00356
TK00357
TK00359
TK00361
TK00704
TK00705
TK00706
TK00707
TK00708
TK00709
TK00710
TK00711
TK00712
TK00713
TK00714
TK00715
TK00716
TK00717
TK00718
TK00719
TK00720
JETBROACH
90 mm
08035
25
12
13
14
15
16
17
17.5
18
19
19.5
20
21
21.5
22
22.5
23
23.5
24
24.5
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
PN
QA-4000
mm
Depth dia.
WA-5000
One-touch Type
15 - 35 (mild steel)
WA-3500
HI-BROACH
AO-5575
Feed Speed
mm/rev
Circumferential Speed m/min
08025
Plate Thickness
CLA-2720
Hole
Capacity
mm
HI-BROACH
One-touch Type/50L
50L : 12 - 52 dia.
50L : 50 dia.
-
QA-6500
Hole Diameter
HI-BROACH
One-touch Type/25L
25L : 12 - 52 dia.
25L : 25 dia.
-
0850 / 08050
(12 - 19.5 dia.)
WA-5000
65 mm
AO-5575
• No dead point
• Peripheral cutting
• Dramatically reduce cutting resistance
• Available diameter size: 12 - 100 mm
Sales Unit : 1 Piece
163 mm
BHM-02035
•
•
•
•
•
•
•
•
•
•
JETBROACH
PN
TK01036
TK01003
TK01004
TK01005
TK01006
TK01007
TK01008
TK01009
TK01010
TK01011
TK01012
TK01013
TK01014
TK01015
TK01016
TK01017
TK01018
TK01019
TK01020
TK01021
TK01022
TK01023
TK01024
TK01025
TK01026
TK01027
TK01028
TK01029
TK01030
TK01031
TK01032
TK01033
TK01034
TK01035
TK01112
TK01113
TK01114
TK01115
TK01116
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
One-touch Type
mm
Depth dia.
75
mm
17.5
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
75
mm
TJ17709
TJ16651
TJ16652
TJ16653
TJ16654
TJ16655
TJ16656
TJ16657
TJ16658
TJ16659
TJ16660
TJ16661
TJ16662
TJ16663
TJ16664
TJ16665
TJ16666
TJ16667
TJ16668
TJ16669
TJ16670
TJ16671
TJ16672
TJ16673
TJ16674
TJ16675
TJ16676
TJ16677
TJ16678
TJ16679
TJ16680
TJ16681
TJ16682
TJ16683
TJ16684
TJ16685
TJ16686
TJ16687
TJ16688
TJ16689
TJ16690
TJ16691
TJ16692
TJ16693
TJ16694
TJ16695
TJ16696
TJ16697
TJ16698
TJ16699
TJ16700
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Pilot Pin
•
•
•
•
•
•
•
•
•
•
PN
A-100
•
•
•
•
•
•
•
•
•
•
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
Pilot Pin
06025
PN : TK01167
6.35 dia.
5 dia.
81 mm
08025
PN : TJ12696
8 dia.
76 mm
06050
PN : TK01166
6.35 dia.
5 dia.
112 mm
0850
PN : TK00802
8 dia.
7 dia.
100 mm
08050
PN : TJ16019
8 dia.
112 mm
12075
AO-5575
TK01068
TK00622
TK00623
TK00631
TK00624
TK00625
TK00632
TK00626
TK00627
TK00628
Pilot Pin
WOJ-3200
50
mm
18
22
24
24.5
25
26
26.5
28
32
35
08050
PN
mm
Depth dia.
Pilot Pin
Pilot Pin
WA-5000
QA-6500
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
BROACH HOLDERS
Specifications
mm
Depth dia.
WA-5000
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Side-lock Type
08075
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
JETBROACH
LO-3550
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
06050
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
One-touch Type
50L(W) for stacked plates.
AO-5575
mm
PN
TK01154
TK01155
TK01156
TK01157
TK01158
TK01159
TK00380
TK00381
TK00382
TK00383
TK00384
TK00385
TK00386
TK00387
TK00388
TK00389
TK00390
TK00391
TK00392
TK00393
TK00394
TK01147
TK00395
TK00396
TK00397
TK00398
TK00399
TK00400
TK00401
TK00402
TK00403
TK00404
TK00405
TK00406
TK00407
TK00408
TK00409
TK00410
TK00411
TK00412
TK00413
TK00414
TK00415
TK00416
TK00417
TK00418
TK00419
TK00420
TK00442
TK00443
TK00444
TK00445
TK00446
TK00447
TK00448
TK00449
TK00450
TK00451
TK00607
TK00608
TK00609
TK00610
TK00611
JETBROACH
08050
50
12
13
14
15
16
17
17.5
18
19
19.5
20
20.5
21
21.5
22
22.5
23
23.5
24
24.5
25
25.5
26
26.5
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
WA-3500
mm
Depth dia.
AO-5575
One-touch Type
WOJ-3200
JETBROACH
LO-3550
BORING
08035
PN : TJ15859
8 dia.
91 mm
08075
PN : TJ17436
8 dia.
133 mm
12075
PN : TA9A207
6 dia.
192 mm
Sales Unit : 1 Piece
Industrial cutters for faster and better finished holes
• The Spring-loaded pilot pin picks up the hole location quickly, and ejects the slug
automatically at the end of cut
• Available with No. 2 - 4 Morse taper shanks
• Oil cup complete Ass'y (PN TB00350) is available as an optional attachment which
provides continuous and adjustable cutting oil flow to the cutting area
182 mm
BHM-03050
248 mm
BHM-13075
232 mm
BHM-14075
Morse Taper No.
M.T.No.2
M.T.No.3
M.T.No.4
BHM-13075 BHM-14075
BHM-02035
BHM-03050
Model
TB00352
TB00390
TB00392
TB00354
PN
JBS-75L
HBO-25L
JBO-35L
HBO-25L
HBO-50L
JBO-35L
JBO-50L JBO-50L(W)
Cutter
50 - 100 dia.
Cutter Diameter 12 - 17 dia. 17.5 - 35 dia. 17.5 - 35 dia. 12 - 17 dia. 17.5 - 52 dia. 12 - 18 dia. 19 - 52 dia. 17.5 - 40 dia. 17.5 - 65 dia. 18 - 35 dia.
12075
06025
08025
08035
06025
08025
06050
0850/08050
08035
08050
Pilot Pin
Included
Optional
Included
Optional
Included
Optional
HBO : HI-BROACH One-touch Type
JBO : JETBROACH One-touch Type
JBS : JETBROACH Side-lock Type
16
PUNCHING
Portable Double-Acting Hydraulic Puncher
Double acting hydraulic system allows automatic and
inching (manual mode) operation.
SELFER ACE
• Applicable for both mild steel and stainless steel punching
Model
HS11-1624 Non-CE*
Model
• Max. punching thickness : 16 mm
• Max. punching diameter : 24 mm
• Max. throat depth : 110 mm
HS07-1624 Non-CE*
• Max. punching thickness : 16 mm
• Max. punching diameter : 24 mm
• Max. throat depth : 70 mm
382 mm
Model
HS06-1322 Non-CE*
• Max. punching thickness : 13 mm
• Max. punching diameter : 22 mm
• Max. throat depth : 60 mm
360 mm
462.5 mm
323 mm
429.5 mm
422 mm
*An optional CE model is available without auto-return function.
Specifications
Model
HS11-1624
HS07-1624
Max. Throat Depth
110
70
Punching Material
Stainless Steel
Mild Steel
Mild Steel
Stainless Steel
Capacity Max. Punching Thickness* mm
6
16
16
6
24
24
24
24
Max. Punching Diameter mm
Hole Making time
Punching Time sec.
11.8
Returning Time sec.
5.7
Allowable Max. Pressure
68.65 (700)
MPa (kgf/cm2)
Max. Output
464 (47)
kN (tf)
Ram Stroke
25
mm
Mass (Weight)
30
30
kg
Accessories Included
• D Punch 22 (Installed)
• Hose Cord Ass'y
• 4 mm Hex. Socket Screw Key
• D Die 22 (Installed)
• Chip Guard Ass'y
• 5 mm Hex. Socket Screw Key
• Sub Handle
• Spanner
• Tool Box
• Ultra-high Pressure Hose
• 12 mm Spanner
HS06-1322
60
Mild Steel
13
22
Stainless Steel
6
22
7.9
3.4
68.65 (700)
367 (37)
21
20.5
*Mild steel : Maximum punching thickness must be calculated by the equation 0.8 x punching diameter.
*Stainless steel : Maximum punching thickness must be calculated by the equation 0.5 x punching diameter.
For the details see the instruction manual.
Optional Accessories
PN
Description
Sales Unit
TB02506
TP05184
TB02390
TP05777
TB02545
TB02141
TA92729
TB02142
TA99037
TQ01279
Hose Kit Ass’y
Ultra-high Pressure Hose 5 m
Switch Cord Ass’y 5 m
Ultra-high Pressure Hose 10 m
Switch Cord Ass’y 10 m
Foot Switch Ass’y
4L Oil Can
Hook Clamp Ass’y
Lock Nut Ass’y for 25 mm Punch
Hex. Socket Head Screw 8 x 14
for Securing Oblong Hole D Dies
1 piece
Dimension from Edge to Punch Center
A
A
24 mm
B
HS11-1624 127
HS07-1624 105
HS06-1322 84
B
134
94
85
HYDRAULIC PUMP for SELFER ACE
Model
HPD-05 Non-CE*
• Double-acting
Specifications
420 mm
426.4 mm
246 mm
17
Model
HPD-05
Power Source (Single Phase)
115 V / 230 V AC
Max. Output Pressure
68.65 (700)
MPa (kgf/cm2)
Output
50 Hz
60 Hz
At No-load
1.20
1.44
L/min
At 68.65 MPa
0.55
0.66
L/min
Motor
0.4 kW 4P
Reservoir Capacity
4.0
L
Discharge Port
Rc 3/8
Electro-Magnetic Valve
4 way 3 position valve
Mass (Weight)
32.5
kg
*An optional CE model is available without auto-return function.
PUNCHING
Portable Single-Acting Hydraulic Puncher
Punch, return, and reset operations are fully automatic.
An emergency switch returns the punch at any time.
SELFER HA Type
• Will punch both round and oblong holes
Model
HA11-1624 Non-CE
• Max. punching thickness : 16 mm
• Max. punching diameter : 24 mm
• Max. throat depth : 110 mm
Model
HA07-1624 Non-CE
Model
• Max. punching thickness : 16 mm
• Max. punching diameter : 24 mm
• Max. throat depth : 70 mm
436 mm
HA06-1322 Non-CE
• Max. punching thickness : 13 mm
• Max. punching diameter : 22 mm
• Max. throat depth : 60 mm
418 mm
545.6 mm
381 mm
545.6 mm
524.1 mm
Specifications
Model
HA11-1624
HA07-1624
Max. Throat Depth
110
70
Punching Material
Mild Steel
Capacity Max. Punching Thickness* mm
16
Max. Punching Diameter mm
24
Hole Making Time
16.5
sec.
Allowable Max. Pressure
68.65 (700)
MPa (kgf/cm2)
Max. Output
431 (44)
kN (tf)
Ram Stroke
25
mm
Mass (Weight)
35.5
28.5
kg
Accessories Included
• D Punch 22 (Installed)
• Hose Cord Ass'y
• Tool Box
• D Die 22 (Installed)
• Spanner
• Sub Handle
• 4 mm Hex. Socket Screw Key
HA06-1322
60
13
22
10.5
68.65 (700)
304 (31)
21
21.5
*Mild steel : Maximum punching thickness must be calculated by the equation 0.8 x punching diameter.
For the details see the instruction manual.
Optional Accessories
PN
Description
Sales Unit
TA96534
TP05184
TA93778
TA9B044
TP05777
TA95307
TA94386
TA92729
TA96342
TA99037
TQ01279
Hose Kit Ass’y 5 m
Ultra-high Pressure Hose 5 m
Switch Cord Ass’y 5 m
Hose Kit Ass’y 10 m
Ultra-high Pressure Hose 10 m
Switch Cord Ass’y 10 m
Foot Switch Ass’y
4L Oil Can
Hook Clamp Ass’y for HA07-1624 and HA11-1624
Lock Nut Ass’y for 25 mm Punch
Hex. Socket Head Screw 8 x 14
for Securing Oblong Hole D Dies
1 piece
Dimension from Edge to Punch Center
A
24 mm
B
A
HA11-1624 111
HA07-1624 93
HA06-1322 83
B
134
94
84
HYDRAULIC PUMP for SELFER HA Type
Model
SC-05 Non-CE
• Single-acting
Specifications
328 mm
405 mm
174 mm
Model
Power Source (Single Phase)
Max. Output Pressure
MPa (kgf/cm2)
Output
At No-load
L/min
At 68.65 MPa
L/min
Motor
Reservoir Capacity
L
Discharge Port
Mass (Weight)
kg
SC-05
115 V / 230 V AC
68.65 (700)
50 Hz
1.20
0.55
60 Hz
1.44
0.66
0.4 kW 4P
4.0
Rc 3/8
27.5
18
PUNCHING
Electrically Operated Hydraulic Puncher
Self-contained hydraulic punch shows its power in
making round or elongated holes in flat bar,
angle bar or channel iron.
HANDY SELFER
Model
E25-0615 Non-CE
Model
• Double insulation
• E punch and E die
• Max. punching thickness : 6mm
• Max. punching diameter : 15 mm
• Max. throat depth : 25 mm
E55-0619 Non-CE
• EL punch and EL die
• Max. punching thickness : 6mm
• Max. punching diameter : 19 mm
• Max. throat depth : 55 mm
420 mm
340.5 mm
357 mm
368 mm
Specifications
Model
E25-0615
E55-0619
Power Source (Single Phase)
115 V AC, 50/60 Hz
220-240 V AC, 50/60Hz
220 - 240 V AC, 50/60 Hz
Max. Throat Depth
25
55
Motor
Rated Power Consumption W
305
670
6.0
3.0
Rated Current
1.4
A
Punching Material
Mild Steel
Capacity Max. Punching Diameter mm
15
19
Max. Punching Thickness mm
6
6
Punching time
4
2
sec (single pass)
Power Cord Length
2.4
2.4
m
Mass (Weight)
7.0
14
kg
Accessories Included
• E Punch 15 (Installed)
• 4 mm Hex. Socket Screw Key
• EL Punch 18 (Installed)
• 5 mm Hex. Socket Screw Key
• E Die 15A
• 10 x 12 mm Spanner
• EL Die 18A
• 10 x 12 mm Spanner
• E Die 15B (Installed)
• Auxiliary Oil 40 cc
• EL Die 18B (Installed)
• Stand
• Sub Handle
• Tool Box
• Sub Handle
• Auxiliary Oil 40 cc
• 2.5 mm Hex. Socket Screw Key • Spanner 8
• 3 mm Hex. Socket Screw Key
• Tool Box
• 4 mm Hex. Socket Screw Key
Optional Accessory (E25-0615)
Die Selection
PN
Description
Sales Unit
TB00800
Stand Ass'y
1 piece
Punching Thickness (mm)
Mild Steel
Stainless Steel
E Die and EL Die
Round Hole E Die A (for Thin Sheets)
Round Hole E Die B (for Thick Sheets)
Round Hole EL Die A (for Thin Sheets)
Round Hole EL Die B (for Thick Sheets)
Round Hole EL Die C (for Channel Iron)
2 to 3.2
4 to 6
2 to 3.2
4 to 6
7 to 8
Max. 3
Max. 4
Max. 3
Max. 4
-
Model
E25-0615
E55-0619
Punching Capacity in Channel Iron (E55-0619)
Punching Dia.
Size
10 OD
11 OD
12 OD
13 OD
14 OD
15 OD
B=40 - 65
16 OD
A=75 - 125
75 x 40 t7
100 x 50 t7.5
125 x 65 t8
t1
B - t1
2
t=Plate thickness
E55-0619
19
18
18
8.5
15
16.5
19.5
17
10
14
9
13.5
8.5
11
13
13
13
unit : mm
10
13
12
13
9
10
6.5
12
8.5
10
6.5
10
6.5
E25-0615
6
5
6.5
Oblong Hole Size
20
21
PUNCHES & DIES
Punches & Dies for SELFER Puncher
FOR HS06-1322/HS07-1624/HS11-1624/HA06-1322/HA07-1624/HA11-1624
Oblong hole D Punch
PN
Size
Oblong hole D Die
PN
Size
Optional Accessories
PN
Oblong hole Jig
PN
Roll Pin
Size
Oblong
hole Punch
TJ13229 D Punch 16 x 8
D Die 16 x 8
Jig 16 x 8
TJ13238
TK00455
TJ13230 D Punch 18 x 9
D Die 18 x 9
Jig 18 x 9
TJ13239
TK00456
TJ13231 D Punch 20 x 10
D Die 20 x 10
Jig 20 x 10
TJ13240
TK00457
TJ13232 D Punch 22 x 11
D Die 22 x 11
Jig 22 x 11
TJ13241
TK00458
TJ13233 D Punch 24 x 12
D Die 24 x 12
Jig 24 x 12
TJ13242
TK00459
TJ13234 D Punch 25 x 9*
D Die 25 x 9
Jig 25 x 9
TJ13243
TK00460
TJ13235 D Punch 25 x 12* TJ13244
D Die 25 x 12
Jig 25 x 12
TK00461
TJ13236 D Punch 25 x 14* TJ13245
D Die 25 x 14
Jig 25 x 14
TK00462
TJ13237 D Punch 25 x 18* TJ13246
D Die 25 x 18
Jig 25 x 18
TK00463
*TA99037 Lock Nut Ass'y is required for Oblong hole D Punch 25 x 9 / 12 / 14 / 18
FOR HS06-1322/HS07-1624/HS11-1624/HA06-1322/HA07-1624/HA11-1624
Round hole D Punch
Round hole D Die
Size
PN
Size
PN
Size
D Punch 8
D Punch 9
D Punch 10
D Punch 11
D Punch 12
D Punch 13
D Punch 14
D Punch 14.5
D Punch 15
D Punch 16
D Punch 17
D Punch 17.5
D Punch 18
D Punch 19
D Punch 20
D Punch 20.5
D Punch 21
D Punch 21.5
D Punch 22
D Punch 23
D Punch 23.5
D Punch 24
D Punch 25
TJ10779
TJ11089
TJ06701
TJ06699
TJ06697
TJ06695
TJ06693
TJ06612
TJ06691
TJ06689
TJ06687
TJ06610
TJ06685
TJ06683
TJ06681
TJ06608
TJ06679
TJ07980
TJ06677
TJ06675
TJ06569
TJ07749
TJ10062
D Die 8
D Die 9
D Die 10
D Die 11
D Die 12
D Die 13
D Die 14
D Die 14.5
D Die 15
D Die 16
D Die 17
D Die 17.5
D Die 18
D Die 19
D Die 20
D Die 20.5
D Die 21
D Die 21.5
D Die 22
D Die 23
D Die 23.5
D Die 24
D Die 25
TK00100
TK00102
TK00143
TK00105
TK00146
TK00111
TK00149
TK00117
TK00120
TK00123
TK00097
TK00167
TK00428
E Punch 4
E Punch 5
E Punch 5.5
E Punch 6
E Punch 6.5
E Punch 8
E Punch 8.5
E Punch 10
E Punch 11
E Punch 12
E Punch 13
E Punch 14
E Punch 15
42
16.5
D Dies
• TA99037 Lock Nut Ass'y is
required for D Punch 25
Oblong hole E Punch
PN
Size
TK00126
TK00158
TK00129
TK00152
TK00155
E Punch 10 x 5
E Punch 10 x 6.5
E Punch 12 x 6
E Punch 13 x 6.5
E Punch 13 x 8.5
PN
Size
TK00242
TK00243
TK00244
TK00245
TK00246
TK00247
TK00248
TK00249
TK00250
TK00251
TK00252
TK00253
EL Punch 10 x 6.5
EL Punch 13 x 6.5
EL Punch 13 x 8.5
EL Punch 13.5 x 9
EL Punch 15 x 10
EL Punch 16.5 x 11
EL Punch 17 x 8.5
EL Punch 18 x 9
EL Punch 18 x 12
EL Punch 19.5 x 13
EL Punch 20 x 10
EL Punch 21 x 14
Round hole EL Punch
PN
Size
TK00193
TK00194
TK00195
TK00196
TK00197
TK00198
TK00199
TK00200
TK00201
TK00202
TK00203
TK00204
TK00205
TK00278
TK00180
EL Punch 6
EL Punch 6.5
EL Punch 8
EL Punch 8.5
EL Punch 10
EL Punch 11
EL Punch 12
EL Punch 13
EL Punch 14
EL Punch 15
EL Punch 16
EL Punch 17
EL Punch 18
EL Punch 18.5
EL Punch 19
Round hole E Die
Round hole E Die
(Type A for thin sheets) (Type B for thick sheets)
PN
Size
PN
Size
E Die 4A
E Die 5A
E Die 5.5A
E Die 6A
E Die 6.5A
E Die 8A
E Die 8.5A
E Die 10A
E Die 11A
E Die 12A
E Die 13A
E Die 14A
E Die 15A
TK00101
TK00103
TK00144
TK00106
TK00147
TK00112
TK00150
TK00118
TK00121
TK00124
TK00098
TK00168
TK00288
TK00254
TK00255
TK00256
TK00257
TK00258
TK00259
TK00260
TK00261
TK00262
TK00263
TK00264
TK00265
EL Die 10 x 6.5A
EL Die 13 x 6.5A
EL Die 13 x 8.5A
EL Die 13.5 x 9A
EL Die 15 x 10A
EL Die 16.5 x 11A
EL Die 17 x 8.5A
EL Die 18 x 9A
EL Die 18 x 12A
EL Die 19.5 x 13A
EL Die 20 x 10A
EL Die 21 x 14A
Round hole EL Die
(Type A for thin sheets)
PN
Size
TK00208
TK00209
TK00210
TK00211
TK00212
TK00213
TK00214
TK00215
TK00216
TK00217
TK00218
TK00219
TK00220
TK00279
TK00181
EL Die 6A
EL Die 6.5A
EL Die 8A
EL Die 8.5A
EL Die 10A
EL Die 11A
EL Die 12A
EL Die 13A
EL Die 14A
EL Die 15A
EL Die 16A
EL Die 17A
EL Die 18A
EL Die 18.5A
EL Die 19A
E Die 5B
E Die 5.5B
E Die 6B
E Die 6.5B
E Die 8B
E Die 8.5B
E Die 10B
E Die 11B
E Die 12B
E Die 13B
E Die 14B
E Die 15B
Oblong hole E Die
Oblong hole E Die
(Type A for thin sheets) (Type B for thick sheets)
PN
Size
PN
Size
E Die 10 x 5A
E Die 10 x 6.5A
E Die 12 x 6A
E Die 13 x 6.5A
E Die 13 x 8.5A
TK00127
TK00159
TK00130
TK00153
TK00156
TK00128
TK00160
TK00131
TK00154
TK00157
E Die 10 x 5B
E Die 10 x 6.5B
E Die 12 x 6B
E Die 13 x 6.5B
E Die 13 x 8.5B
24
35
Oblong hole EL Die
(Type A for thin sheets)
PN
Size
TK00104
TK00145
TK00107
TK00148
TK00113
TK00151
TK00119
TK00122
TK00125
TK00099
TK00169
TK00429
16
FOR E55-0619
Oblong hole EL Punch
1 set
FOR E25-0615
PN
D Punches
1 piece
Oblong hole Die
TJ10778
TJ11088
TJ06700
TJ06698
TJ06696
TJ06694
TJ06692
TJ06611
TJ06690
TJ06688
TJ06686
TJ06609
TJ06684
TJ06682
TJ06680
TJ06607
TJ06678
TJ07979
TJ06676
TJ06674
TJ06566
TJ07748
TJ10061
60
Sales Unit
Jig
Round hole E Punch
30
Description
Hex. Set Screw 8 x 14
TQ01279
for Securing Oblong Hole Dies
TA99037 Lock Nut Ass'y for D Punch 25
Oblong hole EL Die
(Type B for thick sheets)
PN
Size
TK00266
TK00267
TK00268
TK00269
TK00270
TK00271
TK00272
TK00273
TK00274
TK00275
TK00276
TK00277
30.5
21 : over or equal 8 dia.
(19 : under 8 dia.)
E Punches
EL Die 10 x 6.5B
EL Die 13 x 6.5B
EL Die 13 x 8.5B
EL Die 13.5 x 9B
EL Die 15 x 10B
EL Die 16.5 x 11B
EL Die 17 x 8.5B
EL Die 18 x 9B
EL Die 18 x 12B
EL Die 19.5 x 13B
EL Die 20 x 10B
EL Die 21 x 14B
Front view of
E Dies Type A
Side face of
E Dies Type A
35
27
21 : over or equal 8 dia.
(19 : under 8 dia.)
Front view of
E Dies Type B
Side face of
E Dies Type B
Round hole EL Die
Round hole EL Die
(Type B for thick sheets) (Type C for channel iron)
PN
Size
PN
Size
TK00222
TK00223
TK00224
TK00225
TK00226
TK00227
TK00228
TK00229
TK00230
TK00231
TK00232
TK00233
TK00234
TK00280
TK00182
EL Die 6B
EL Die 6.5B
EL Die 8B
EL Die 8.5B
EL Die 10B
EL Die 11B
EL Die 12B
EL Die 13B
EL Die 14B
EL Die 15B
EL Die 16B
EL Die 17B
EL Die 18B
EL Die 18.5B
EL Die 19B
TK00235
TK00236
TK00237
TK00238
TK00239
TK00240
TK00241
-
EL Die 10C
EL Die 11C
EL Die 12C
EL Die 13C
EL Die 14C
EL Die 15C
EL Die 16C
-
22
30.5
EL Punches
40
32
22.5
Front view of
EL Dies Type A, B & C
Side face of
EL Dies Type A, B & C
Sales Unit : 1 Piece
20
NITTO KOHKI Tools for Professional Use
Chamfering
Scaling & Chipping
Grinding & Sanding
Flat Sanding
Hand Beveler
Air Chipper
Myton
Free Sander
P25
P30
P41
Mini Beveler
Auto Chisel
Line Sander
P25 - 27
P31
P35 - 36
P42
Circuit
cuit Beveler
Super Kelen
Belton
Orbital Sander
Machining & Molding
Sheet-metal Working
Welding
Painting
Steel Fabricating &
Can Manufacturing
Molding & Die-casting
Bridges & Ship Building
Plant Construction & Piping
Wood Working & Art
Automotive & Painting
Construction
: Best Suited
: Suited
P32
P43
Jet Chisel
Palm Orbital Sander
P26 - 28
P37 - 40
P33 - 34
21
P43
Precision Grinding
Filing
Deburring
Cutting
Drilling
Air Sonic
Super Hand Light
Burr Cutter
Super Saw
Air Drill
P45
P47
P48
P48
Super Hand
P44 - 45
P46
Micro Air Hand
P47
22
CHAMFERING
Guide for Selecting Portable Chamfering Tools
Select the model according to the conditions of chamfering capacity, electrical or pneumatic tool required, and materials to be chamfered.
Electric
Pneumatic
Max. Chamfering
Capacity
for Mild Steel
Applicable to stainless steel chamfering
Electric
Pneumatic
Max. Chamfering
Capacity
for Stainless Steel
For straight edges
Model HB-15B
Up to 15 mm Chamfer
(Max. chamfering capacity for one-cut is 7C)
15C
For straight edges
Model AMBL-0307/
For straight edges
AMB-0307
Model EMB-0307B
Up to 3 mm Chamfer or
2, 3, 4 mm Radius
3C
Up to 3 mm Chamfer or
2, 3, 4 mm Radius
For straight edges
Model AMBL-0307/
For straight edges
AMB-0307
Model EMB-0307B
Up to 7 mm Chamfer or 2, 3, 4 mm Radius
7C
Up to 7 mm Chamfer or 2, 3, 4 mm Radius
For curved edges
Model ECB-0203
Up to 1.5 mm Chamfer
or 2 mm Radius
1.5C
For straight edges
Model MB-03A
For curved edges
Up to 3 mm Chamfer or 2 and 3 mm Radius
Model CB-01
3C
0.5C
Up to 0.5 mm Chamfer
For curved edges
Model ECB-0203
For curved edges
Up to 3 mm Chamfer or 2 and 3 mm Radius
Model CB-02
2C
Up to 2 mm Chamfer or 2 mm Radius
For curved edgess
Model CB-01
1C
EMB-0307B
Chamfering steel plates
Up to 1 mm Chamfer
Pneumatic
For bridge and shipbuilding applications
With locking throttle lever
Model CBR-03
Exclusive for 3 mm
Radius Chamfering
CBR-03
For curved edges
23
CHAMFERING
HAND BEVELER
MINI BEVELER
MINI BEVELER
CIRCUIT BEVELER
Model HB-15B
• Mild steel:15C
Model EMB-0307B
• Mild steel:7C, 4R
• Stainless steel:3C, 4R
Model MB-03A
• Mild steel:3C, 3R
Model ECB-0203
• Mild steel:3C, 3R
• Stainless steel:1.5C, 2R
For further information,
see the following pages.
P25 for Model HB-15B
P25 for Model EMB-0307B
P26 for Model MB-03A
P26 for Model ECB-0203
Specifications
ELECTRIC
HB-15B
Model
Power Source (Single Phase)
Rated Power Consumption
W
Duty Cycle
min
No-load Speed
min-1(rpm)
Chamfering Capacity Mild Steel
EMB-0307B
220 - 240 V AC 50 Hz
110 - 120 V AC 60 Hz
910
MB-03A
1100
Continuous
2750 (220 - 240 V)
3340 (110 - 120 V)
Up to 15 mm Chamfer
(Initial chamfer is 7 mm.)
ECB-0203
220 - 240 V AC 50/60 Hz
100 - 110 V AC 50/60 Hz
430
220 - 240 V AC, 50/60 Hz
220 - 240 V AC 50/60 Hz
450
30
11000
10000
Up to 7 mm Chamfer
2, 3, 4 mm Radius
Up to 3 mm Chamfer
2, 3, 4 mm Radius
Up to 3 mm Chamfer
2 and 3 mm Radius
Up to 1.5 mm Chamfer
Stainless Steel
2 mm Radius
Chamfer Angle
15° - 45°
45°
Mass (Weight)
3.9
2.5
kg
14
Optional Accessories
• TA9A728 Pipe Plate Ass’y for
• TB02539 Attachment for
• TA9A594 Inner Head Ass’y for
• TB03097 Plate Ass’y for
Pipe Outer Edge Beveling
Pipe Outer Edge Beveling
Pipe Inner Edge Beveling
Straight Edge Beveling
(Pipe O.D. 125 to 800 mm)
(Pipe O.D. 80 to 200 mm)
(Minimum Inner Pipe Diameter
*Pipe O.D. more than 200 mm can be
: 100 mm)
chamfered with the standard accessory.
• TB02862 Dust Box Ass’y Used
with TB03097 Plate Ass’y
• TB02857 Guide Sleeve 24 mm Dia.
Ass’y
MINI BEVELER
CIRCUIT BEVELER
CIRCUIT BEVELER
CIRCUIT BEVELER
Model AMBL-0307 (Lever)
Model AMB-0307 (Ring)
• Mild steel:7C, 4R
• Stainless steel:3C, 4R
Model CB-01
• Mild steel:1C
• Stainless steel:0.5C
Model CB-02
• Mild steel:2C, 2R
Model CBR-03
• Mild steel:3R
For further information,
see the following pages.
P27 for Model AMBL/AMB-0307
P27 for Model CB-01
P28 for Model CB-02
P28 for Model CBR-03
Specifications
PNEUMATIC
Model
Air Pressure
MPa (kgf/cm2)
Air Consumption (No Load) m3/min
Free Speed
min-1(rpm)
Chamfering Capacity Mild Steel
Stainless Steel
Chamfer Angle
Mass (Weight)
Optional Accessories
kg
AMBL-0307/AMB-0307
CB-01
CB-02
CBR-03
0.4
15000
Up to 2 mm Chamfer
2 mm Radius
0.65
12000
0.6 (6)
0.9
14000
Up to 7 mm Chamfer
2, 3, 4 mm Radius
Up to 3 mm Chamfer
2, 3, 4 mm Radius
15° - 45°
2.9
• TB02539 Attachment for
Pipe Outer Edge Beveling
(Pipe O.D. 80 to 200 mm)
0.15
28000
Up to 1 mm Chamfer
Up to 0.5 mm Chamfer
45°
0.5
• TB09143 Plate Ass’y for
Straight Edge Beveling
3 mm Radius
1.8
• TB02437 Thin Plate Attachment
Ass’y
2
• TB09140 Guide Plate 78 Ass’y
for More Stable Operation
*For further information of optional Beveler accessories, see p.29.
24
CHAMFERING
Portable Chamfering Tools
Chamfering up to 15C
HAND BEVELER
• Ideal for plate, pipe, and tube chamfering for welding preparation
• Chamfer width up to 15 mm at 45° angle using multiple passes
• Indexable inserts have four working edges for good economy
• Finishes a surface so fine that post-sanding is unnecessary
• Column R-section can be chamfered with optional attachment
• High speed cutting action minimizes material hardening
Model
HB-15B
Specifications
Model
HB-15B
Power Source (Single Phase)
110 - 120 V AC, 50/60 Hz 220 - 240 V AC, 50/60 Hz
Rated Power Consumption
W
910
Rated Current
A
10.5
4
Duty Cycle
min
Continuous
No-load Speed
min-1(rpm)
3350
2750
Chamfering Capacity (Mild Steel)
Up to 15 mm Chamfer
Chamfer Angle
15° - 45°
Power Cord Length
5
m
Mass (Weight)
15
kg
330 mm (115V)
326 mm (230V)
15C
Mild Steel
220 mm
Accessories Included
• 12 pieces of Indexable Insert 12.7 (Installed)
• 12 pieces of Indexable Insert 12.7
• 4 mm Hex. Socket Screw Key
• 5 mm Hex. Socket Screw Key
• 6 mm Hex. Socket Screw key
• 24 x 27 mm Spanner
• Hook Spanner 25 - 28
• 3 mm T Wrench
• Roller Bracket Ass’y
• Spacer A
• Spacer B
• Plate B
Chamfer Angle and Width
Chamfer Angle
Chamfering steel plates
45˚
30˚
15˚
Chamfering I-beams
Mild Steel(mm)
X
Y
15
15
9
15.5
4
15.4
Chamfer
Y
X
Straight
Handy Electric Chamfering Tool
Designed to chamfer stainless and mild steel
MINI BEVELER
• Ideal for edge chamfering pipe, tube, and plate
• Adjustable to chamfer angles from 15° to 45°
• Chamfer width up to 7 mm on mild steel.
• Uses indexable carbide inserts
• Swarf and chip collection box included
Model
EMB-0307B
Double insulation
Specifications
Model
Power Source (Single Phase)
Rated Power Consumption
W
Rated Current
A
Duty Cycle
min
No-load Speed
min-1(rpm)
Chamfering Capacity Mild Steel
Stainless Steel
Chamfer Angle
Power Cord Length
m
Mass (Weight)
kg
188 mm
180 mm
317 mm
EMB-0307B
220 - 240 V AC, 50/60 Hz
1100
5
Continuous
11000
Up to 7 mm Chamfer or 2, 3, 4 mm Radius
Up to 3 mm Chamfer or 2, 3, 4 mm Radius
15° - 45°
2.5
3.9
Accessories Included
7C
4R
Mild Steel
3C
4R
Stainless Steel
• Indexable Insert with Hole 12.7 (Installed)
• Indexable Insert Set Screw 4 x 7 (Installed)
• Indexable Insert with Hole 12.7
• Indexable Insert Set Screw 4 x 7
• Dust Box Ass'y
• Carbon Brush Ass'y
• 2 pieces of Hex. Nut M8
• 2 pieces of Hex. Socket Set Screw 8 x 25
• 3 pieces of Pan Head Screw 5 x 10
• 4 mm Hex. Socket Screw Key
• Spanner T-15D
Chamfer Angle, Width and Radius
Chamfer Angle
45˚
30˚
15˚
25
Mild Steel(mm)
X
Y
Z
7
7
9.9
3.8
6.6
7.6
1.5
5.6
5.8
Stainless Steel(mm)
X
Y
Z
3
3
4.2
2.2
3.8
4.4
1
3.8
3.9
Chamfer
Y
X
Z
Straight
Radius
Mild Steel(mm)
2, 3, 4
Stainless Steel(mm)
2, 3, 4
Radius
Round
CHAMFERING
Handy Electric Chamfering Tool
Compact and light for speed chamfering
MINI BEVELER
• An outer R-part attachment allows chamfering of outer diameters
with a radius greater than 170 mm
• An optional inner head ass'y allows chamfering a pipe of inner
diameter larger than 100 mm (50R)
Model
MB-03A Non-CE
Double insulation
Specifications
Model
MB-03A
Power Source (Single Phase)
110 V AC, 50/60 Hz
230 V AC, 50/60 Hz
Rated Power Consumption
W
430
Rated Current
A
4.5
2
Duty Cycle
min
30
No-load Speed
min-1(rpm)
11000
Chamfering Capacity (Mild Steel)
Up to 3 mm Chamfer or 2 mm and 3 mm Radius
Chamfer Angle
45°
Power Cord Length
2.5
m
Mass (Weight)
2.5
kg
278 mm
108 mm
Accessories Included
150 mm
3C
3R
Mild Steel
• Indexable Insert 9.525 R2 (Installed)
• Indexable Insert 9.525
• 3 mm Hex. Socket Screw Key
• 4 mm Hex. Socket Screw Key
• Spanner T-9F
• Hex. Nut
• 2 pieces of Hex. Socket Set Screw 8 x 25
Chamfer Angle, Width and Radius
Mild Steel(mm)
Chamfer X
X
Y
45˚
3
3
Y
Straight
Radius
Mild Steel(mm)
2, 3
Radius
Round
Electric Radial Chamfering Tool
Smoothly chamfering straight and curved edges
CIRCUIT BEVELER
• Designed to chamfer stainless and mild steel
• Minimum chamfering plate thickness is 2 mm (Max. 0.5 mm Chamfer)
• Indexable inserts have four working edges for good economy
• An optional straight plate allows chamfering a straight edge shoulder
Model
ECB-0203
Double insulation
Specifications
400 mm
Model
ECB-0203
Power Source (Single Phase)
220 - 240 V AC, 50/60 Hz
Rated Power Consumption
450
W
Rated Current
A
2.1
Duty Cycle
min
30
No-load Speed
min-1(rpm)
11000
Chamfering Capacity Mild Steel
Up to 3 mm Chamfer or 2* and 3 mm Radius
Up to 1.5 mm Chamfer or 2* mm Radius
Stainless Steel
Chamfer Angle
45°
Power Cord Length
2.5
m
Mass (Weight)
2.5
kg
138 mm
3C
3R
1.5C
2R
Mild Steel
Chamfering straight edges
Chamfering curved edges
mm
15
Min. Radius
7.5
mm
Min. Depth
Accessories Included
• Indexable Insert with Hole 12.7 (Installed)
• Indexable Insert Set Screw 4 x 7 (Installed)
• Indexable Insert with Hole 12.7
• Indexable Insert Set Screw 4 x 7
• Sub Handle
• Grip Guard
• Ball Bearing 687zz
• 5 mm Hex. Socket Screw Key
• 8 x 10 mm Spanner
• Spanner T-150
• Gauge C3
Chamfer Angle, Width and Radius
Chamfering range of operation
Min. Diameter
Stainless Steel
*In case of 3 mm Radius, an optional indexable Insert for 3R is necessary, and 2 mm Radius,
an optional guide sleeve 24 mm dia. and indexable insert for 2R are necessary.
Min. Thickness
18 mm
2 mm
Mild Steel(mm)
X
Y
3
3
Stainless Steel(mm)
Chamfer X
X
Y
45˚
1.5
1.5
Y
Straight
Mild Steel Stainless Steel
(mm)
(mm)
Radius
2, 3
Radius
2
Round
26
CHAMFERING
Pneumatic Chamfering Tool
Ideal for chamfering plate, pipe, tube
and other profiles
MINI BEVELER
Model
AMBL-0307
Model
• Lever type
AMB-0307 Non-CE
• Ring type
202 mm
177 mm
• Lightweight design for portable edge chamfering applications
• Designed to chamfer stainless and carbon steels
• Adjustable to chamfer angles from 15° to 45°
• 300 mm minimum radius bend
• Chamfer width up to 7 mm at 45°
• Uses indexable carbide inserts
Specifications
Model
MPa (kgf/cm2)
Air Pressure
m3/min
Air Consumption (No-load)
min-1(rpm)
Free Speed
Chamfering Capacity Mild Steel
Stainless Steel
Chamfer Angle
Inlet Size
kg
Mass (Weight)
126 mm
126 mm
180 mm
180 mm
7C
4R
0.6 (6)
0.9
14000
Up to 7 mm Chamfer or 2, 3, 4 mm Radius
Up to 3 mm Chamfer or 2, 3, 4 mm Radius
15° - 45°
Rc 3/8
2.9
Accessories Included
3C
4R
Mild Steel
AMBL-0307 / AMB-0307
Stainless Steel
• Indexable Insert with Hole 12.7 (Installed)
• Indexable Insert Set Screw 4 x 7 (Installed)
• Indexable Insert with Hole 12.7
• Indexable Insert Set Screw 4 x 7
• Knob
• 2 pieces of Hex. Socket Set Screw 8 x 25
• 2 pieces of Hex. Nut M8
• 3 mm Hex. Socket Screw Key
• 4 mm Hex. Socket Screw Key
• Spanner T-15F
• Bushing R 3/8 x NPT 3/8
Chamfer Angle, Width and Radius
Chamfer Angle
45˚
30˚
15˚
Mild Steel(mm)
X
Y
Z
7
7
9.9
7
8.1
4
2.2
8
8.3
Stainless Steel(mm)
Y
X
Z
3
3
4.2
2.2
3.8
4.4
1
3.8
3.9
Pneumatic Radial Chamfering Tool
Y
X
Radius
Mild Steel(mm)
2, 3, 4
Stainless Steel(mm)
2, 3, 4
Round
Z
Straight
• Only requires a 6.8 mm diameter hole for chamfering
• Two 3-sided indexable inserts provide a cost effective way to get a smooth, chatter free finish
CB-01
Specifications
106 mm
Model
MPa (kgf/cm2)
Air Pressure
m3/min
Air Consumption (No-load)
min-1(rpm)
Free Speed
Chamfering Capacity Mild Steel
Stainless Steel
Chamfer Angle
Minimum Workpiece Thickness mm
Inlet Size
kg
Mass (Weight)
64 mm
CB-01
0.6 (6)
0.15
28000
Up to 1 mm Chamfer
Up to 0.5 mm Chamfer
45°
1.5 (0.5 mm Chamfer)
Rc 1/4
0.5
Accessories Included
1C
Mild Steel
mm
6.8
27
Min. Radius
Min. Depth
Min. Thickness
6 mm
3m
m
7 mm
• 2 pieces of Indexable Insert 8.4 (Installed)
• 2 pieces of Indexable Insert Set Screw (Installed)
• 2 pieces of Indexable Insert Set Screw
• 2 mm Hex. Socket Screw Key for Chamfering Adjustments
• Spanner T-6F for Replacement of Indexable Insert
• Bushing R 1/4 x NPT 1/4
Chamfer Angle and Width
Chamfering range of operation
Min. Diameter
Radius
Ideally suited for chamfering machine and
mold component parts
CIRCUIT BEVELER
Model
Chamfer
1.5 mm
Mild Steel(mm)
X
Y
1
1
Chamfer
X
45˚
Y
Straight
CHAMFERING
Pneumatic Radial Chamfering Tool
CIRCUIT BEVELER
Model
CB-02
Uniquely designed to chamfer circular, elliptical and
straight line profiles
• Chamfers exterior and/or interior edges
• Depth gauge provided to accurately set chamfer widths
• Optional attachment PN TB02437 available for chamfering thin materials
136 mm
Specifications
Model
MPa (kgf/cm2)
Air Pressure
m3/min
Air Consumption (No-load)
min-1(rpm)
Free Speed
Chamfering Capacity
Chamfer Angle
Inlet Size
kg
Mass (Weight)
116 mm
Mild Steel
Chamfering range of operation
6m
m
12
mm
Min. Radius
0.6 (6)
0.4
15000
Up to 2 mm Chamfer or 2 mm Radius
45°
Rc 1/4
1.8
Accessories Included
2C
2R
Min. Diameter
CB-02
Min. Depth
20 mm
• Indexable Insert 9.525 (Installed)
• Indexable Insert 9.525
• Adjustment Gauge
• Spanner T-9F
• Protective Cap
• Hook Spanner 58-65
• Bushing R 1/4 x NPT 1/4
Chamfer Angle, Width and Radius
Mild Steel(mm)
Chamfer X
X
Y
45˚
2
2
Y
Straight
Radius
Mild Steel(mm)
2
Radius
Round
Pneumatic Radial Chamfering Tool
For bridge and shipbuilding applications
CIRCUIT BEVELER
Bridge
Model
• Radius chamfering on the scallop parts or holes of bridge members
CBR-03
Shipbuilding
• Meets or exceeds PSPC* requirements on surface preparation of steel
materials prior to coating
• Radius chamfering on steel materials used in seawater ballast tanks and
double-side skin bulk carrier production
• Dual cutting head with 4 radius surfaces per tip and a quick-change base
117 mm
*PSPC stands for Performance Standard for Protective Coatings regulated
by International Marine Organization.
Specifications
CBR-03
Model
MPa (kgf/cm2)
Air Pressure
m3/min
Air Consumption (No-load)
-1
min
(rpm)
Free Speed
Chamfering Capacity
Minimum Workpiece Thickness mm
Inlet Size
kg
Mass (Weight)
81 mm
3R
Accessories Included
Steel
Chamfering range of operation
Min. Diameter
Min. Radius
• 2 pieces of Indexable Insert 12.7 R3 (Installed) • Spanner T-15D
• 2 pieces of Indexable Insert Set Screw (Installed) • Handle
• Indexable Insert Set Screw
Chamfer Angle and Width
Min. Depth
22
mm
Radius
11
mm
0.6 (6)
0.65
12000
3 mm Radius
6
Rc 1/4
2
9 mm
Mild Steel(mm)
3
Radius
Round
28
CHAMFERING
Optional Beveler Accessories
Ref.
No.
PN
1
2
3
4
5
6
7
8
9
-
TB09097
TB09338
TA9A093
TB01159
TB01791
TB01651
TB01790
TB09018
TA9A386
TA9A592
TA9A638
TB09140
TB09143
TA9A728
TB02539
TA9A594
TB02857
TB03097
TB02862
TB02437
TB03424
TQ01683
Description
Sales Unit
10 pcs./set
10 pcs./set
12 pcs./set
10 pcs./set
10 pcs./set
10 pcs./set
10 pcs./set
10 pcs./set
10 pcs./set
10 pcs./set
10 pcs./set
1 set
1 set
1 set
1 set
1 set
1 set
1 set
1 set
1 set
1 piece
1 piece
Indexable Insert 8.4 for Mild Steel
Indexable Insert 8.4 for Stainless Steel
Indexable Insert 12.7
Indexable Insert 12.7 with Hole
Indexable Insert 12.7 R2
Indexable Insert 12.7 R3
Indexable Insert 12.7 R4
Indexable Insert 12.7 R3
Indexable Insert 9.525
Indexable Insert 9.525 R2
Indexable Insert 9.525 R3
Guide Plate 78 Ass’y for More Stable Operation
Plate Ass’y for Straight Edge Use
Pipe and tube Beveling Attachment
Attachment for Small Dia. Pipe
Inner Head Ass’y
Guide sleeve 24 mm dia. Ass’y
Plate Ass’y for Straight Line Use
Dust Box Ass’y
Thin Plate Attachment Ass’y
Spanner T-9D
Spanner T-15D
Ref. No.2 : Requires use of TB09140 Guide Plate 78 Ass’y
Ref. No.3 : Capacity 125 to 800 mm O.D.
Ref. No.4 : Capacity 80 to 200 mm O.D.
Ref. No.5 : Capacity Minimum 100 mm I.D.
Ref. No.6 : For chamfering R2
Ref. No.7 : Used with Plate Ass’y for Straight Line Use
Ref. No.8 : Used with Plate Ass’y for Straight Line Use
EMB-0307B
HB-15B AMBL-0307 MB-03A
AMB-0307
•
•
•
•
•
ECB-0203
CB-02
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1
2
3
4
5
6
7
8
9
Spanner
Indexable Insert
CB-01
TB09140 Guide Plate 78 Ass’y for More Stable Operation
29
CBR-03
•
•
•
•
•
•
CB-01
CB-01
TB09143 Plate Ass’y for Straight Edge Use
•
SCALING
Pneumatic Chipping Hammer
Removes weld splatter quickly and easily
AIR CHIPPER
• Ideal tool for quickly and efficiently removing weld splatter, rust and other debris from most surfaces
• Compact, heavy-duty construction for tough industrial applications
• Easy one-touch chisel installation and removal – NO tools required
• Idle protection system, helps prevent accidental start-up “ACH-16” only
Model
ACH-16
Model
CH-24
147 mm
184 mm
Specifications
ACH-16
Model
MPa (kgf/cm2)
Air Pressure
m3/min
Air Consumption (No-load)
min-1
Stroke Speed
mm
Shank Size
Inlet Size
kg
Mass (Weight)
Accessories Included
CH-24
0.6 (6)
0.15
6000
10.5 Round
0.2
4000
12.7 Square
Rc 3/8
0.9
• TQ03431 Flat Chisel (Installed)
• Bushing R 3/8 x NPT 3/8
• Hose Nipple R 3/8 x 3/8
1.7
• TP15166 Curved Flat Chisel (Installed)
• Bushing R 3/8 x NPT 3/8
• Hose Nipple R 3/8 x 3/8
Optional Chisels for Air Chipper ACH-16
Ref. No.
PN
Description
Sales Unit
1
2
3
4
TQ03431
TQ03452
TQ03453
TQ03549
Flat Chisel 20 x 120
Flat Chisel 20 x 180
Curved Flat Chisel 20 x 120
Flat Chisel 11 x 120
1 piece
Optional Chisels for Air Chipper CH-24
Ref. No.
PN
Description
Sales Unit
5
6
7
TP15233
TP15234
TP15166
Flat Chisel 25 x 155
Straight Flat Chisel 12.7 x 165
Curved Flat Chisel 25 x 155
1 piece
1
2
120
20
20
3
4
120
180
20
11
5
120
25
6
155
12.7
7
155
165
25
unit : mm
30
SCALING
Air Hammer
A special spool valve inside grip
assures excellent durability
AUTO CHISEL
Model
• Designed for speeding up the repair and sheet metal work of automobiles, etc.
• Enables hammering work in narrow spaces
• Durable and powerful action
• Fast and easy chisel change to reduce downtime
• A wide variety of chisels available
A-300
185 mm
Specifications
160 mm
Model
A-300
MPa (kgf/cm2)
Air Pressure
0.6 (6)
m3/min
Air Consumption (No-load)
0.3
min-1
Stroke Speed
2600
mm
Shank Size
10
Inlet Size
Rc 1/4
kg
Mass (Weight)
1.7
Accessories Included
• Bushing R 1/4 x NPT 1/4
• Hose Nipple R 1/4 x 1/4
*Chisels are not included as standard.
Optional Chisels
PN : TP00572
PN : TP00573
PN : TP04606
PN : TP00575
Blank Chisel
Flat Chisel
Sheet Metal Chisel A
Sheet Metal Chisel B
No. 1001
No. 1002
No. 1003
No. 1004
For a variety of sheet metal work, bending,
and rivet closing jobs
Puts increased efficiency into scraping,
peeling spot welds, and cutting off bolts
and pins
Cuts shapes in sheet metal fast
Just the chisel for cutting off sheet
metal body panel
PN : TP00576
PN : TP00577
PN : TP00578
PN : TP00579
Silencer Cutting Chisel
Rubber Bushing Remover
Spot Weld Booster
Bushing Tool
No. 1005
No. 1006
No. 1007
No. 1008
A quick cut-off chisel for muffler piping
Helps you remove idle arm sleeves
and bushings in record time
Ideal for peeling off spot welded points
and cutting off pins
Puts speed and ease into the job of bushing
insertion
PN : TP00580
PN : TP00581
PN : TP00582
PN : TP00583
Punch
Bushing Removing Tool
Sheet Metal Punch
20 mm Bending Chisel
No. 1009
No. 1010
No. 1011
No. 1012
For driving out pins and rivets, and fitting
and removing bearings and races
A faster servicing aid in removing bushings
Opens holes for bolts and rivets
Helps you in peening and removing slag
around welds
PN : TP00584
PN : TA90051
PN : TP00586
PN : TP00585
Fork Chisel 24
Panel Crimper
Fork Chisel 35
Fork Chisel 15
No. 1013
No. 1014
No. 1016
No. 1017
Disconnecting tie rod ends and ball joints
Bending sheet metal: external body plates,
doors, fenders, etc.
Disconnecting tie rod end ball joints
Disconnecting tie rod end ball joints
PN : TP00589
PN : TP00590
PN : TP00591
PN : TP04995
38 mm Scraper
60 mm Scraper
60 mm Concave Scraper
Sheet Metal Chisel C
No. 1018
No. 1019
No. 1020
No. 1023
Peeling paint & removing rust from iron plate Peeling paint & removing rust from iron plate
Removing incrustation from pipe
PN : TP05244
PN : TP05775
PN : TP05801
Moilpoint Chisel
Rivet Removing Punch
Rivet Caulking Chisel
No. 1024
No. 1025
No. 1026
Breaking-up concrete, removing sand
from castings
31
Removing rivets from brake lining of
heavy duty cars
Caulking brake lining of heavy duty cars
Cuts shapes in sheet metal fast
*An order is available from one piece.
SCALING
Pneumatic Scaler
Industrial and shipboard pneumatic scalers
SUPER KELEN
• Quickly and efficiently removes rust, scale, paint, tar and concrete from most surfaces
• Ideal for industrial, maritime and shipboard cleaning and descaling operations
• Idle protection system, tool will not activate unless contacting work surface
• S-1000 – over 1.3 m in length for extended reach applications and operator convenience
• Tool-less chisel installation and removal
Model
S-250 Non-CE
Model
S-500 Non-CE
Model
S-1000 Non-CE
537 mm
797 mm
1377 mm
Specifications
Model
MPa (kgf/cm2)
Air Pressure
m3/min
Air Consumption (No-load)
min-1
Stroke Speed
mm
Shank Size
Inlet Size
kg
Mass (Weight)
Accessories Included
S-250
S-500
S-1000
4.1
0.6 (6)
0.27
2500
12.7
Rc 1/4
4.7
6.1
• No.2005 38 mm Bend Scraper (Installed)
• Hose Lock Nut M16
• Hose Nipple 3/8
Optional Chisels
Ref. No.
PN
1
2
3
4
5
6
7
TP03645
TP03646
TP03647
TP04010
TP04552
TP04553
TP04554
1
2
180
60
Description
No.2001
No.2002
No.2003
No.2004
No.2005
No.2006
No.2007
3
180
38
16 dia.
4
180
5
177
60
Sales Unit
60 mm Scraper
38 mm Scraper
Blank Chisel
60 mm Concave Scraper
38 mm Bend Scraper
60 mm Concave Bend Scraper
60 mm Bend Scraper
6
180
38
1 piece
7
180
60
180
60
unit : mm
32
SCALING
Needle Scaler
Powerful scaling with multi-needles
JET CHISEL
Model
JC-16
• Lightweight model
• Quickly and efficiently removes weld slag, rust, paint and scale from most surfaces
• Ideal for cleaning and descaling steel, bridgework, castings, brick, stone and many other materials
• Heavy-duty construction for industrial and maritime applications
• Proven superior design features with no internal spring components ensure trouble-free performance
(JEX-2800A and JEX-20 have balancing springs)
Model
JEX-24
Model
• Universal model
158 mm
JEX-28
Model
• Heavy-duty model
237 mm
247 mm
264 mm
167 mm
154 mm
JEX-2800A
• Reduced vibration model
180 mm
178 mm
Specifications
Model
JC-16
MPa (kgf/cm2)
Air Pressure
m3/min
Air Consumption (No-load)
0.15
min-1
Stroke Speed
4000
Inlet Size
kg
Mass (Weight)
1.4
Accessories Included
• 29 pieces of 2 mm x 150 mm
Needles (Installed)
• 29 pieces of 2 mm x 150 mm
Needles
• Bushing R 3/8 x NPT 3/8
• Hose Nipple R 3/8 x 3/8
Model
AJC-16
JEX-24
0.27
4000
JEX-2800A
0.35
4500
0.43
3700
Rc 3/8
2.7
• 23 pieces of 3 mm x 180 mm
Needles (Installed)
• 6 mm Hex. Socket ScrewKey
• Bushing R 3/8 x NPT 3/8
• Hose Nipple R 3/8 x 3/8
Model
• Slim model
JEX-28
0.6 (6)
3.5
• 28 pieces of 3 mm x 180 mm
Needles (Installed)
• 14 pieces of 4 mm x 180 mm
Needles
• Needle supporter 4 mm
• 6 mm Hex. Socket Screw Key
• Bushing R 3/8 x NPT 3/8
• Hose Nipple R 3/8 x 3/8
JT-20
Model
• Medium duty model
208 mm
3.3
• 28 pieces of 3 mm x 180 mm
Needles (Installed)
• 14 pieces of 4 mm x 180 mm
Needles
• Needle supporter 4 mm
• Bushing R 3/8 x NPT 3/8
• Hose Nipple R 3/8 x 3/8
JEX-20
• Reduced vibration model
263 mm
261 mm
Specifications
Model
AJC-16
MPa (kgf/cm2)
Air Pressure
m3/min
Air Consumption (No-load)
0.07
min-1
Stroke Speed
6000
Inlet Size
kg
Mass (Weight)
0.98
Accessories Included
• 3 pieces of 3 mm x 180 mm Needles (Installed)
• 3 pieces of 3 mm x 180 mm Needles
• Bushing R 3/8 x NPT 3/8
• Hose Nipple R 3/8 x 3/8
33
JT-20
0.6 (6)
0.2
4000
Rc 3/8
2.4
• 12 pieces of 3 mm x 180 mm Needles (Installed)
• 12 pieces of 3 mm x 180 mm Needles
• Bushing R 3/8 x NPT 3/8
• Hose Nipple R 3/8 x 3/8
JEX-20
0.2
4000
2.75
• 12 pieces of 3 mm x 180 mm Needles (Installed)
• 12 pieces of 3 mm x 180 mm Needles
• Bushing R 3/8 x NPT 3/8
• Hose Nipple R 3/8 x 3/8
SCALING
Electric Needle Scaler
Powerful 300 watt double insulated motor
JET CHISEL
• Extended length, slim barrel design
• Adjustable front handle for operator comfort and convenience
Model
EJC-32A
Specifications
516 mm
229 mm
Model
EJC-32A
Power Source (Single Phase)
110 - 120 V AC, 50/60 Hz 220 - 240 V AC, 50/60 Hz
Rated Power Consumption
W
300
Rated Current
2.8
1.4
A
Duty Cycle
min
30
Stroke Speed
min-1
3000
Power Cord Length
5
m
Mass (Weight)
4.5
kg
110 - 120 V Non-CE
220 - 240 V
Shot Peening Effect
Reinforcement of a welded part with the shot
peening effect increases strength by imparting
residual stress to the surface of the workpiece
through the high speed impact of the needles.
Highly suitable for effective reinforcement of
deteriorated welded parts.
Full Automatic System - Excludes EJC-32A
The only unit of it’s kind on the market
without springs. This means no springs to
break...no irregular power... and the
advantage of low air consumption.
Self-Adjusting Needles
Jet Chisel needles automatically adjust to any surface contour. They get deep
into corners, reach into uneven surfaces, and conform to all types of shapes,
making it a tool no shop should be without.
Combination of Needle and Needle Supporter
2 mm
3 mm
4 mm
Number of Needles Required
Needle Supporter PN
Number of Needles Required
Needle Supporter PN
Number of Needles Required
Needle Supporter PN
Needle
Diameter
Length
2 mm
3 mm
4 mm
150 mm
180 mm
300 mm
500 mm
180 mm
300 mm
500 mm
800 mm
180 mm
300 mm
500 mm
PN
Sales Unit
TA98780
TA98781
TA9A213
TA9A214
TA98782
TA9A216
TA9A217
TA9A218
TA98783
TA9A220
TA9A221
100 pcs./set
100 pcs./set
50 pcs./set
50 pcs./set
100 pcs./set
50 pcs./set
50 pcs./set
50 pcs./set
50 pcs./set
50 pcs./set
50 pcs./set
JC-16
JEX-24
JEX-28
29 pcs.
TP00290
-
53 pcs.
TP02244
23 pcs.
TP02245
-
66 pcs.
TP01499
28 pcs.
TP01461
14 pcs.
TP01462
JC-16
JEX-24
JEX-28
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Model
AJC-16
JEX-2800A
66 pcs.
TP01499
28 pcs.
TP01461
14 pcs.
TP01462
7 pcs.
TQ05210
3 pcs.
TQ04554
-
Model
JEX-2800A
AJC-16
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
JT-20
JEX-20
EJC-32A
29 pcs.
TP00338
12 pcs.
TP00337
-
29 pcs.
TP00338
12 pcs.
TP00337
-
32 pcs.
TP16475
15 pcs.
TP16301
-
JT-20
JEX-20
EJC-32A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Optional Needles
Premium Nitto Kohki needles out-perform competitors’ needles
ensuring optimal performance and trouble-free operation.
34
GRINDING & SANDING
Pneumatic Grinder
MYTON
Model
MLG-25
• Depressed center wheel 58 mm
Heavy-duty grinders for tough applications
• Side exhaust with noise reduction system
• Great power/weight ratio
Model
MLG-40
Model
• Depressed center wheel 100 mm
Model
MAGW-40 Non-CE
• Ring type
• Depressed center wheel 100 mm
225 mm
133 mm
221 mm
211 mm
87 mm
67 mm
MAGW-40
• Lever type
• Depressed center wheel 100 mm
96 mm
96 mm
Specifications
Model
MLG-25
MPa (kgf/cm2)
Air Pressure
m3/min
Air Consumption
0.42 (No-load)
min-1(rpm)
Free Speed
19000
Depressed Center Grinding Wheel mm
58
Inlet Size
Rc 1/4
kg
Mass (Weight)
0.6
Accessories Included
• Green DiscGS #80
• 5 mm Hex. Socket Screw Key
• 19 mm Single Ended Spanner
• Bushing R 1/4 x NPT 1/4
Model
MAG-50
• Depressed center wheel 125 mm
Model
MLG-40
MAGW-40 Lever Type
0.45 (No-load) 0.91 (Load)
• 6 mm Hex. Socket Screw Key
• Bushing R 3/8 x NPT 3/8
MLG-50
Model
• Depressed center wheel 125 mm
0.68 (No-load) 0.82 (Load)
13000
100
Rc 3/8
1.5
• 6 mm Hex. Socket Screw Key
• 17 mm Single Ended Spanner
• Bushing R 3/8 x NPT 3/8
MLG-70
102 mm
Model
• Lever type
• Depressed center wheel 180 mm
MLG-70 Non-CE
• Ring type
• Depressed center wheel 180 mm
271 mm
271 mm
223 mm
MAGW-40 Ring Type
0.6 (6)
239 mm
103 mm
103 mm
98 mm
Specifications
Model
MAG-50
MPa (kgf/cm2)
Air Pressure
m3/min
Air Consumption
0.77 (No-load) 0.83 (Load)
min-1(rpm)
Free Speed
12000
Depressed Center Grinding Wheel mm
125
Inlet Size
kg
Mass (Weight)
2.2
Accessories Included
• Air Hose Sub Ass'y
• Exhaust Hose Ass'y
• Side Handle
• 4 mm Hex Socket Screw Key
• Pin Face Wrench
• Bushing R 3/8 x NPT 3/8
35
MLG-50
MLG-70 Lever Type
MLG-70 Ring Type
0.6 (6)
0.7 (No-load) 0.81 (Load)
11000
125
0.75 (No-load) 1.1 (Load)
7600
180
Rc 3/8
2.5
• Handle
• Wheel Guard Ass'y
• 4 mm Hex. Socket Screw Key
• 6 mm Hex. Socket Screw Key
• Pin Face Wrench
• Bushing R 3/8 x NPT 3/8
2.5
• 6 mm Hex. Socket Screw Key
• 10 mm Hex. Socket Screw Key
• Bushing R 3/8 x NPT 3/8
• Handle
• Wheel Guard Ass'y
2.3
GRINDING & SANDING
Pneumatic Sander
MYTON
Ideal for sanding and/or polishing metal, aluminum, wood, plastic
and many other materials
• Compact and lightweight design for working in confined spaces
• Side exhaust with noise reduction system
Model
MLS-20
Model
• Abrasive disc 1", 1 - 1/2" & 2"
MAS-40 Non-CE
• Abrasive disc 100 mm
Model
MAS-70 Non-CE
• Abrasive disc 180 mm
• Japanese model
202 mm
132 mm
162 mm
72 mm
82 mm
99 mm
Specifications
Model
MLS-20
MAS-40
MPa (kgf/cm2)
Air Pressure
0.6 (6)
Air Consumption (No-load) m3/min
0.45
0.42
min-1(rpm)
Free Speed
13000
19000
Abrasive Disc
100 mm
1", 1 - 1/2" and 2"
mm
Chuck Size
6
Inlet Size
Rc 1/4
kg
Mass (Weight)
0.9
0.55
Accessories Included
• 1" Disc Sanding Pad
• 6 mm Hex. Socket Screw Key
• 1 - 1/2" Disc Sanding Pad
• Bushing R 1/4 x NPT 1/4
• 2" Disc Sanding Pad
• 17 mm Single Ended Spanner
• 2 pieces of 14 mm Single Ended Spanner
• Bushing R 1/4 x NPT 1/4
• Assortment of Sample Abrasive Disks Contains:
2 each of #60, #80, #100, and #120 2" abrasive disc
2 each of #60, #80, #100, and #120 1-1/2" abrasive disc
2 each of #60, #80, #100, and #120 1" abrasive disc
Grinding Discs for Myton MLG-25
PN
Description
TB08872
TB08873
TB08874
TB08875
TB08876
TB09074
TB09075
TB09076
TB09077
TB09078
TB09079
TB09080
TB09081
TB09082
TB09083
GS#46 x 58 mm
GS#60 x 58 mm
GS#80 x 58 mm
GS#100 x 58 mm
GS#120 x 58 mm
Myton Disc Z Z#40 x 58
Myton Disc Z Z#60 x 58
Myton Disc Z Z#80 x 58
Myton Disc Z Z#100 x 58
Myton Disc Z Z#120 x 58
Myton Disc SA A#40 x 58
Myton Disc SA A#60 x 58
Myton Disc SA A#80 x 58
Myton Disc SA A#100 x 58
Myton Disc SA A#120 x 58
Sales Unit
MAS-70
0.98
7500
180 mm
N/A
Rc 3/8
1.9
• 6 mm Hex. Socket Screw Key
• 17 mm Single Ended Spanner
• Bushing R 3/8 x NPT 3/8
Sanding Discs and Disc Pads for Myton MLS-20
Disc
PN
5 pcs./set
10 pcs./set
5 pcs./set
5 pcs./set
5 pcs./set
Designed for
curve sanding.
TB09736
TB09737
TB09738
TB09739
TB09740
TB09741
TB09742
TB09743
TB09744
TB09745
TB09746
TB09747
TB09748
TB09749
TB09750
TB09751
TB09752
TB09753
TB09754
TB09755
TB09756
TB09757
TB09758
TB09759
Description
Sales Unit
Sanding Disc 1" x #40
Sanding Disc 1" x #60
Sanding Disc 1" x #80
Sanding Disc 1" x #100
25 pcs./set
Sanding Disc 1" x #120
Sanding Disc 1" x #180
Sanding Disc 1" x #240
Sanding Disc 1" x #320
Sanding Disc 1 - 1/2" x #40
Sanding Disc 1 - 1/2" x #60
Sanding Disc 1 - 1/2" x #80
Sanding Disc 1 - 1/2" x #100
25 pcs./set
Sanding Disc 1 - 1/2" x #120
Sanding Disc 1 - 1/2" x #180
Sanding Disc 1 - 1/2" x #240
Sanding Disc 1 - 1/2" x #320
Sanding Disc 2" x #40
Sanding Disc 2" x #60
Sanding Disc 2" x #80
Sanding Disc 2" x #100
25 pcs./set
Sanding Disc 2" x #120
Sanding Disc 2" x #180
Sanding Disc 2" x #240
Sanding Disc 2" x #320
Sanding Disc
Disc Pad
Sales Unit
TQ14384
1" Disc
Sanding Pad
1 piece
TQ14383
1 - 1/2" Disc
Sanding Pad
1 piece
TQ14382
2" Disc
Sanding Pad
1 piece
MLS-20
36
SANDING
Pneumatic Belt Sander
BELTON
Model
Ideal for sanding and grinding in narrow spaces,
recessed areas and on curved surfaces
• Quick belt change
• Rear exhaust system
B-10N
Model
• Belt size 10 mm (W)
B-20N
Model
• Belt size 20 mm (W)
223 mm
152 mm
B-20NB
Model
• Belt size 20 mm (W)
B-30N
• Belt size 30 mm (W)
250 mm
250 mm
299 mm
243 mm
243 mm
The Idle Pulley
for B-20N is
supported on
both sides.
The Idle Pulley
for B-20NB is
supported on
one side only.
257 mm
Specifications
Model
B-10N
MPa (kgf/cm2)
Air Pressure
m3/min
Air Consumption (No-load)
0.4
min-1(rpm)
Free Speed
m/min
Belt Speed
1120
mm
Belt Size
10 x 330
Inlet Size
kg
Mass (Weight)
0.7
Accessories Included
• 2 pieces of Abrasive Belt
Z#60 x 10 mm (1 piece installed)
• Abrasive Belt Z#80 x 10 mm
• Abrasive Belt Z#100 x 10 mm
• Abrasive Belt Z#120 x 10 mm
• 2 mm Hex. Socket Screw Key
• 4 mm Hex. Socket Screw Key
• Bushing R 1/4 x NPT 1/4
B-20N
B-20NB
2620
20 x 520
Rc 1/4
1.2
• 2 pieces of Abrasive Belt
Z#60 x 20 mm (1 piece installed)
• Abrasive Belt Z#80 x 20 mm
• Abrasive Belt Z#100 x 20 mm
• Abrasive Belt Z#120 x 20 mm
• 2.5 mm Hex. Socket Screw Key
• 4 mm Hex. Socket Screw Key
• Bushing R 1/4 x NPT 1/4
• Convex Shoe
• Finger Pad Sub Ass'y
• Pan Head Screw 5 x 10
• Pan Head Screw 6 x 10
For B-30N
Push
Tension Bar
Just push the push button to
pull back the tension bar.
37
Push the idle pulley into self-locking position
to loosen the belt.
Push
Idle Pulley
• 2 pieces of Abrasive Belt
Z#60 x 20 mm (1 piece installed)
• Abrasive Belt Z#80 x 20 mm
• Abrasive Belt Z#100 x 20 mm
• Abrasive Belt Z#120 x 20 mm
• 4 mm Hex. Socket Screw Key
• Bushing R 1/4 x NPT 1/4
• Convex Shoe
• Finger Pad Sub Ass'y
• Pan Head Screw 5 x 10
• Pan Head Screw 6 x 10
2.4
• 2 pieces of Abrasive Belt
Z#60 x 30 mm (1 piece installed)
• Abrasive Belt Z#80 x 30 mm
• Abrasive Belt Z#100 x 30 mm
• 4 mm Hex. Socket Screw Key
• 5 mm Hex. Socket Screw Key
• Handle
• Bushing R 1/4 x NPT 1/4
Guard position is adjustable
Belt change can be made easily by pushing the idle pulley against the housing to lock the tension bar.
Push the idle pulley into self-locking position
to loosen the belt.
0.68
14000
2160
30 x 540
17000
Belt change is quick and easy
For B-10N & B-20N
B-30N
0.6 (6)
0.52
Self-locking position
Just push the flat shoe to
pull back the tension bar.
Shoe
Guard angle can be changed freely in accordance with
the working position and shape of the workpiece.
SANDING
Belt Speed Adjustment
2SWLRQDO2IIVHW%UDFNHW$VV·\IRU%1%1DQG%1
Belt speed can be easily adjusted by turning the adjust lever or
adjust valve without a tool.
For B-10N & B-20N
An optional offset bracket ass’y is available for individual model.
For B-30N
High
High
Low
Low
Offset Bracket
Adjust Lever
*Curved surface sanding is possible by using the offset bracket.
Adjust Valve
Abrasive Belt for B-10N
Grit
Abrasive Belt for B-10N
Belt Size : 6 mm x 330 mm (W x L)
PN
Zirconia (Z)
Alumina (AA)
Grit
TA9A237
50 pcs./set
TB00241
TB00242
TB00243
TB00244
TB00245
TB00246
-
#40
#60
#80
#100
#120
#180
#240
#400
50 pcs./set
Abrasive Belt for B-20N and B-20NB
Grit
TA9A252
TA9A253
TA9A254
TA99605
TA99606
TA99607
TA99608
TA99609
TB00250
TB00251
-
Ceramic (CE)
TB08368
TB08369
TB08370
TB08371
TB08372
50 pcs./set
Sales Unit
Abrasive Belt for B-30N
Belt Size : 20 mm x 520 mm (W x L)
PN
Zirconia (Z)
Alumina (AA)
#40
#60
#80
#100
#120
#180
#240
#280
#320
#400
TA9A244
TA9A064
TB00076
TB00077
TB00247
TB00248
TB00249
-
#40
#60
#80
#100
#120
#180
#240
#400
When using the belt, optional bracket
6 ass’y and TQ10942 shoe 6 are
required.
Sales Unit
Belt Size : 10 mm x 330 mm (W x L)
PN
Zirconia (Z)
Alumina (AA)
Grit
Ceramic (CE)
TB08373
TB08374
TB08375
TB08376
TB08377
20 pcs./set
20 pcs./set
Belt Size : 30 mm x 540 mm (W x L)
PN
Zirconia (Z)
Alumina (AA)
TA9A262
TA9A263
TA9A264
TB00252
TB00253
TB00254
TB00255
TB00256
TB00257
TB00258
-
#40
#60
#80
#100
#120
#180
#240
#280
#320
#400
20 pcs./set
Sales Unit
Ceramic (CE)
TB08378
TB08379
TB08380
TB08381
TB08382
20 pcs./set
Sales Unit
Optional Parts
Ref. No.
PN
Description
Sales Unit
1
2
3
4
5
6
Offset Bracket 10 Ass’y
TB05539
Offset Bracket 20 Ass’y
TB07109
Offset Bracket 30 Ass’y
TB08150
Convex Shoe
TQ11686
Bracket 6 Ass’y*
TB07283
Shoe 6*
TQ10942
*TB07283 and TQ10942 are used together.
1
2
3
B-10N
•
1 set
1 set
1 set
1 piece
1 set
1 piece
4
•
•
5
Applicable Model
B-20N
B-30N
B-20NB
•
•
•
6
38
SANDING
Pneumatic Belt Sander
BABY BELTON
Ideal for deburring, chamfering, bead grinding,
and polishing applications
• Compact and lightweight, yet powerful
• Alternative rotation direction
• Ergonomically designed for left or right hand operator convenience
Model
BB-10A
Model
• Lever type
• Belt size 10 mm (W)
BB-10A Non-CE
• Ring type
• Belt size 10 mm (W)
246 mm
Model
BB-20
• Belt size 20 mm (W)
249 mm
245.3 mm
79 mm
103 mm
79 mm
Specifications
Model
BB-10A Lever Type
BB-10A Ring Type
MPa (kgf/cm2)
Air Pressure
0.6 (6)
m3/min
Air Consumption (No-load)
0.25
min-1(rpm)
Free Speed
16000
m/min
Belt Speed
1000
mm
Belt Size
10 x 330
Inlet Size
Rc 1/4
kg
Mass (Weight)
0.5
0.6
Accessories Included
• Abrasive Belt Z#100 x 10 mm (Installed)
• Abrasive Belt Z#100 x 10 mm (Installed)
• Abrasive Belt Z#120 x 10 mm
• Abrasive Belt Z#120 x 10 mm
• Abrasive Belt Z#180 x 10 mm
• Abrasive Belt Z#180 x 10 mm
• Abrasive Belt Z#240 x 10 mm
• Abrasive Belt Z#240 x 10 mm
• 1.5 mm Hex. Socket Screw Key
• 1.5 mm Hex. Socket Screw Key
• Bushing R 1/4 x NPT 1/4
• Bushing R 1/4 x NPT 1/4
BB-20
0.43
1100
20 x 330
0.8
• Abrasive Belt Z#60 x 20 mm (Installed)
• Abrasive Belt Z#120 x 20 mm
• Abrasive Belt Z#240 x 20 mm
• 2.5 mm Hex. Socket Screw Key
• 3 mm Hex. Socket Screw Key
• Shoe
• Dust Cover
• Bushing R 1/4 x NPT 1/4
Quick and easy belt installation and removal "NO Tools Required"
1
2
Remove side cover.
3
Push idle pulley bracket into
self-locking position.
Replace grinding belt.
The throttle lever can be turned by 180 degrees.
Ergonomically designed for right or left hand operator convenience
Left hand
grip
Right hand
grip
Sanding for curved surfaces
Curved surface sanding is possible by using the offset bracket.
Offset Bracket
39
Push locking lever
to tighten the belt.
Belt rotation direction can be changed.
Belt rotation direction can be changed to control the direction of chip splash.
Forward
Reverse
The offset bracket can be positioned up or down.
Push-in offset bracket pulley allows the following use.
SANDING
Belt Speed Adjustment (BB-10)
Speed can be adjusted by turning the adjust valve with a screwdriver.
High speed
Low speed
Adjust Valve
Guard position is adjustable (BB-20)
Belt Speed Adjustment (BB-20)
Guard angle can be changed freely in accordance with the working position
and shape of the workpieces.
Belt speed can be easily adjusted by turning the adjust valve without a tool.
High
Adjust Valve
Guard
Low
Ideal for deburring, chamfering, bead grinding, and polishing applications
Deburring & chamfering of
uneven edge and plate surfaces
Curved and unique profiles
Detail finishing
Deburring of thin materials
Optional Parts
Ref. No.
1
2
3
4
5
PN
Description
Offset Bracket 10 Ass’y
TB05539
Offset Bracket 20 Ass’y
TB07109
Tension Bar 520 Ass’y*
TB07224
Shoe 520*
TQ10701
Finger Pad Ass’y 520
TB07227
*TB07224 and TQ10701 are used together.
Sales Unit
Model
1 set
1 set
1 set
1 piece
1 set
BB-10A
Abrasive Belt for BB-10A
Grit
#40
#60
#80
#100
#120
#180
#240
#400
1
2
3
4
5
Abrasive Belt for BB-20
Belt Size : 10 mm x 330 mm (W x L)
PN
Zirconia (Z)
Alumina (AA) Ceramic (CE)
TA9A064
TB00076
TB00077
TB00247
TB00248
TB00249
TA9A244
50 pcs./set
BB-20
TB08368
TB08369
TB08370
TB08371
TB08372
50 pcs./set
Grit
#40
#60
#80
#100
#120
#180
#240
#320
#400
Sales Unit
Belt Size : 20 mm x 330 mm (W x L)
PN
Zirconia (Z)
Alumina (AA) Ceramic (CE)
TB07114
TB07115
TB07116
TB07117
TB07118
TB07119
TB07120
20 pcs./set
TB07125
TB07126
TB07127
TB07128
20 pcs./set
Non-woven
TB07122 A-M Equivalent to #180
TB07121 A-VF Equivalent to #320
TB07123 S-SF Equivalent to #400
5 pcs./set
Sales Unit
40
SANDING
Handy Pneumatic Sander
Super lightweight, low-vibration design
FREE SANDER
• Ideal for sanding and surface finishing wood, metal, plastic and other materials
• Lightweight design with minimal vibration
• High output and low air consumption motors produce high speed orbits for swirl-free finishes
• Oil free design
• Suitable for industrial and production applications
Model
FS-50A
Model
FS-100C
110 mm
75 mm
100 mm
82 mm
Specifications
FS-50A
Model
MPa (kgf/cm2)
Air Pressure
m3/min
Air Consumption (No-load)
min-1(rpm)
Free Speed
mm
Orbit Diameter
mm
Pad Size
mm
Paper Size
Inlet Size
kg
Mass (Weight)
Accessories Included
FS-100C
0.6 (6)
0.14
15000
1.2
75 x 82
70 x 114
0.2
20000
1.5
110 x 100
114 x 140
Rc 1/8
0.5
• Air Hose H Ass’y
• 5 pieces of Abrasive Paper #180
• 5 pieces of Abrasive Paper #240
• Bushing R 1/4 x NPT 1/4
• Air Hose H Ass’y
• 5 pieces of Abrasive Paper #180
• 5 pieces of Abrasive Paper #240
• Bushing R 1/4 x NPT 1/4
Optional Accessories
Ref. No.
PN
Description
1
2
3
4
5
6
TA99828
TB02240
TA9A367
TA91474
TB02235
TA9A265
TA9A266
TA9A267
TA9A268
TA9A269
TA9A270
TA9A271
Rubber Pad
Dust Collector
Rubber Pad
Round Pad
Dust Collector
Abrasive Paper #100
Abrasive Paper #120
Abrasive Paper #150
Abrasive Paper #180
Abrasive Paper #240
Abrasive Paper #280
Abrasive Paper #320
1&3
Model
1 piece
FS-50A
1 piece
FS-100C
200 pcs./set
4
Rubber Pad
2&5
Round Pad
6
Dust Collector
41
Sales Unit
Abrasive Paper
Round-Pad for FS-100C
The pad is made of sponge rubber and conforms easily to the shape
being worked.
Double-stick tape is used with round pad.
SANDING
Pneumatic Reciprocating Sander
Ideal for inline and grain sanding applications
LINE SANDER
• Ideal for most inline and profile sanding applications
• Compact and lightweight 0.75 kg design
• Low vibration and minimal noise output
• Suitable for sanding steel, aluminum, wood, plastic and other materials
Model
LS-10
103 mm
55 mm
Specifications
Model
LS-10
MPa (kgf/cm2)
Air Pressure
0.6 (6)
m3/min
Air Consumption (No-load)
0.11
min-1
Free Speed
4000
mm
Stroke Length
4
mm
Pad Size
55 x 103
mm
Paper Size
57 x 140
Inlet Size
Rc 1/8
kg
Mass (Weight)
0.75
Accessories Included
• Air Hose E Ass’y
• Block Rubber Pad
• Base Plate A Ass’y
• 5 pieces of Abrasive Paper #240
• 5 pieces of Abrasive Paper #320
• Bushing R 1/4 x NPT 1/4
Optional Accessories
Ref. No.
PN
Description
Sales Unit
1
2
3
TB02244
TA96665
TA96739
Dust Collector
Rubber Pad
Block Rubber Pad
1 piece
2
Dust Collector
The Block Rubber Pad Assembly can be easily trimmed to conform to the
shape being worked and is available as an accessory.
3
Rubber Pad
Block Rubber Pad
Abrasive Paper
Cut standard size paper (9" x 11") into 8 pieces, as shown below. For dry
sanding, use an open coat abrasive paper with silicon carbide or
aluminum oxide abrasive grains to prevent clogging, improve grinding
efficiency, and prolong the life of the paper.
11”
1/8
9”
1
Special Sanding Pad
42
SANDING
Pneumatic Compact Sander
Heavy-duty and powerful with
adjustable speed regulator
ORBITAL SANDER
Model
• Powerful dual action for tough applications
• Standard with dust extraction system
• Rugged construction for years of reliable performance
OSV-60A
Specifications
245 mm
Model
OSV-60A
MPa (kgf/cm2)
Air Pressure
0.6 (6)
Air Consumption (No-load) m3/min
0.68
min-1(rpm)
Free Speed
8500
mm
Orbit Diameter
10
Paper (Self Stick Paper) Size mm
150
Inlet Size
Rc 1/4
kg
Mass (Weight)
2
Accessories Included
• Dust Collection Ass’y with Dust Bag
• Single Ended Spanner 17
• Bushing R 1/4 x NPT 1/4
• Brush
Random orbital action creates a professional finish
By offsetting the sanding pad shaft,
fast aggressive sanding is achieved
while dramatically reducing swirl
patterns. Speed adjustments allow for
the best speed for the best job.
Pneumatic Compact Sander
Ergonomic lightweight design
PALM ORBITAL SANDER
• Extremely light. APS-125 weighs just 690 g
• Ergonomically designed for operator convenience and comfort
• Powerful high speed 10000 RPM motor
• Ultra small orbital action for high quality swirl-free finishes
• Available with 125 mm or 150 mm pads
• Variable speed control
Model
APS-125/150
Applications
• Feather edging, metal preparation, and finishing work on body filler
• Curved surface sanding and corner rounding in wood work
Specifications
145 mm
Non Vacuum
Model
APS-125
APS-150
MPa (kgf/cm2)
Air Pressure
0.6 (6)
Air Consumption (No-load) m3/min
0.45
min-1(rpm)
Free Speed
10000
mm
Orbit Diameter
5
Paper (Self Stick Paper) Size mm
125
150
Inlet Size
Rc 1/4
kg
Mass (Weight)
0.69
0.72
Accessories Included
• 17 mm Single Ended Spanner
• Bushing R 1/4 x NPT 1/4
*VELCRO Pad is available as option.
For Self Vacuum & Central Vacuum
Random orbital action creates a professional finish
By offsetting the sanding pad shaft, fast aggressive
sanding is achieved while dramatically reducing
swirl patterns. Speed adjustments allow for the
best speed for the best job.
43
The non-vacuum model is available from stock and can easily be modified
to self-vacuum or central vacuum.
Self Vacuum
Central Vacuum
GRINDING
Pneumatic Die Grinder
Ideal for most deburring, finishing and grinding applications
AIR SONIC
• Precision machined with heavy-duty spindle and support bearings
• Rear exhaust with noise reduction system
• Suitable for industrial and production applications
• Locking throttle lever helps prevent accidental start-up
• Accepts most stone-type and rotary carbide burrs with 6 mm shanks
Model
L-25B
Model
• For all grinding, deburring and
finishing jobs
L-35C
• Special design for rotary burrs
171 mm
136 mm
Specifications
L-25B
Model
MPa (kgf/cm2)
Air Pressure
m3/min
Air Consumption (No-load)
min-1(rpm)
Free Speed
mm
Chuck Size
Inlet Size
kg
Mass (Weight)
Accessories Included
L-35C
0.6 (6)
0.4
27000
0.35
37500
1.5
6
Rc 1/4
0.6 (without hose)
• 14 mm Single Ended Spanner
• Mounted Wheel No.2
• Mounted Wheel No.3
• Chuck Pin
• Bushing R 1/4 x NPT 1/4
0.45 (without hose)
• 2 pieces of 14 mm Single Ended Spanner
• Mounted Wheel 13 x 13 x 6 x 38
• Bushing R 1/4 x NPT 1/4
Optional Accessories
Mounted Wheel for AIR SONIC L-25B (Sales Unit : 5 pcs./set)
Rotary Burr for AIR SONIC L-35C (Sales Unit : 1 piece)
No.1 : 16 x 32
No.1 : CB1C-106
No.2 : 16 x 32
PN : TA9A277
No.5 : 19 x 28
No.3 : 19 x 20
PN : TA9A278
No.6 : 25 x 13
PN : TA9A281
PN : TA9A279
No.7 : 32 x 10
PN : TA9A282
PN : TA9A283
No.4 : 25 x 25
PN : TA9A280
No.8 : 16 ball
PN : TA9A284
PN : TP10594
No.5 : CB5C-104
PN : TP10598
No.2 : CB2C-105
PN : TP10595
No.6 : CB6C-102
PN : TP10599
No.3 : CB3C-103
PN : TP10596
No.7 : CB7C-103
PN : TP10600
No.4 : CB4C-103
PN : TP10597
No.8 : CB8C-105
PN : TP10601
Optional Accessory
PN
Description
Sales Unit
TP02806
Chuck Sleeve 6 x 3 mm
1 piece
A mounted wheel or rotary burr with 3 mm shaft
can be installed on L-25B and L-35C by using the
chuck sleeve 6 x 3.
44
GRINDING/FILING
Pneumatic Die Grinder
High speed rotation 56500 rpm
AIR SONIC
• Smooth high speed rotation and low vibration enables precision grinding
• Stepless speed change from 0 to 56500 rpm meets a wide range of grinding applications
• Compact and light weight for comfortable operation over long periods of time.
• Triangular grip fits operator’s hand. Special plastic grip prevents cold hands and absorbs vibration.
• Rear exhaust system
Model
AL-55
Specifications
Model
AL-55
MPa (kgf/cm2)
Air Pressure
0.6 (6)
Air Consumption (No-load) m3/min
0.17
min-1(rpm)
Free Speed
56500
mm
Chuck Size
3
Inlet Size
G 1/4
kg
Mass (Weight)
0.25
Accessories Included
• 2 pieces of 7 x 9 mm Spanner
• Mounted Wheel 5 x 13 x 3
• Bushing R 1/4 x NPT 1/4
129 mm
22 mm OD
Optional Accessory
PN
Description
Sales Unit
TB00137
Mounted wheel 5 x 13 x 3
10 pcs./set
Portable Precision Finishing File
SUPER HAND LIGHT
Model
Best suited for deburring of die-cast
aluminum products and machined parts
• Small size, light-weight, and low-vibration model
• Reduced operator fatigue for greater productivity
SHL-40
Specifications
Model
SHL-40
MPa (kgf/cm2)
Air Pressure
0.6 (6)
Air Consumption (No-load) m3/min
0.07
min-1
Stroke Speed
9000
mm
Stroke Length
4
mm
File shank Size
3
Inlet Size
Rc 1/4
kg
Mass (Weight)
0.4
Accessories Included
• Flat File LF-13
• 2 mm Hex. Socket Screw Key
• Bushing R 1/4 x NPT 1/4
179 mm
Optional Accessories
Sales Unit : 3 pcs./set
Rat Tail File LF-10
Triangular Taper File LF-11
80
3 OD
3 OD
80
PN : TB09652
45
PN : TB09654
Flat File LF-13
80
4.5
80
3 OD
Reciprocating motion
4 mm stroke
Half Round File LF-12
PN : TB09653
PN : TB09651
FILING
Portable Precision Finishing File
Fast, efficient filing, sanding and deburring tools
SUPER HAND
• Eliminates time consuming manual hand-filing operations
• Ideal for industrial production filing applications on steel, aluminum, brass, wood and other materials
• Unique and compact design delivers reduced vibration performance while reducing operator fatigue.
• Interchangeable files
• Rear exhaust system
• Weight reduced by half for comfortable operation over long period of time (ASH-900)
Model
SH-100A
Model
• Rugged construction for
reliable performance
ASH-900
• Weight reduced by half for
comfortable operation
over long period of time
182 mm
177 mm
Reciprocating motion
9 mm stroke
Reciprocating motion
9 mm stroke
Specifications
SH-100A
Model
MPa (kgf/cm2)
Air Pressure
m3/min
Air Consumption (No-load)
min-1
Stroke Speed
mm
Stroke Length
mm
File shank Size
Inlet Size
kg
Mass (Weight)
Accessories Included
ASH-900
0.6 (6)
0.24
3700
0.13
6300
9
6.3
5.0
Rc 1/4
1.1
• Rat Tail File SF-10
• Triangular Taper File SF-11
• Half Round File SF-12
• Flat File SF-13
• 3 mm Hex. Socket Screw Key
• Bushing R 1/4 x NPT 1/4
• Air Hose E Ass’y
0.5
• Rat Tail File SF-10
• Triangular Taper File SF-11
• Half Round File SF-12
• Flat File SF-13
• 2.5 mm Hex. Socket Screw Key
• Bushing R 1/4 x NPT 1/4
Optional Accessories
Ref. No.
PN
Description
1
2
3
4
5
6
7
TA9A222
TA9A223
TA9A224
TA9A225
TA91752
TA94625
TB04319
Rat Tail File SF-10
Triangular Taper File SF-11
Half Round File SF-12
Flat File SF-13
Rubber Pad Ass'y for SH-100A
Supporter Ass'y for SH-100A (use with TA91752)
Sanding Pad Ass'y for ASH-900
1
2
Sales Unit
5 pcs./set
1 set
5
6
3
7
4
46
FILING/DEBURRING
Portable Fine Finishing File
Light weight, ultra-low vibration filer for polishing
and lapping operations
MICRO AIR HAND
• Fine reciprocating motion best for precision parts filing
MAH-05
MAH-16
Model
176 mm
176 mm
Specifications
Model
MAH-05
MAH-16
MPa (kgf/cm2)
Air Pressure
0.6 (6)
Air Consumption (No-load) m3/min
0.07
min-1
Stroke Speed
22000
11000
mm
Stroke Length
0.5
2.2
mm
File Shank Size
3
Inlet Size
Rc 1/4
kg
Mass (Weight)
0.37
Accessories Included
• Flat End Diamond File
• Round End Diamond File
• 2 mm Hex. Socket Screw Key
• Bushing R 1/4 x NPT 1/4
Optional Accessories
PN
Description
Sales Unit
3 OD
Model
Flat End Diamond File
4.5
TB07502
3 OD
1 OD
Round End Diamond File
Reciprocating motion
2.2 mm stroke
Triangular End Diamond File
TB07504
5 pcs./set
65
5 pcs./set
2
Reciprocating motion
0.5 mm stroke
3 OD
TB07503
5 pcs./set
65
3 OD
65
Half-round End Diamond File
Mounting Examples
TB07505
5 pcs./set
65
*This holder can be used for polishing and lapping
applications by mounting ceramic stones, etc.
(Max size: Thickness 3.2 mm x Width 20 mm)
Vice Holder*
1 set
TB07506
Pneumatic Deburring Tool
For deburring machined holes
BURR CUTTER
• While gripping the lever, push the countersink into the machined holes to remove burrs
• Optimum speed can be obtained by the adjust valve, resulting in clear deburred surfaces
• Push-to-engage type prevents the countersink from coming off the hole and damaging the workpiece
• Replacement of the countersink is easy and quick with a set of three quick change chucks provided
Model
BC-005
Specifications
209 mm
Model
BC-005
MPa (kgf/cm2)
Air Pressure
0.6 (6)
Air Consumption (No-load) m3/min
0.22
min-1(rpm)
Free Speed
420
mm
Deburring Hole diameter
3 to 34
mm
Countersink Shank Size
6, 8, 10, 12*
Inlet Size
Rc 1/8
kg
Mass (Weight)
0.75
Accessories Included
• Chuck 6 mm
• Chuck 8 mm
• Chuck 10 mm (Installed)
• Suspension Bail
• 2.5 mm Hex. Socket Screw Key
• Bushing R 1/8 x NPT 1/4
*Chuck 12 mm is optional.
Countersinks are not provided with the tool. Please purchase them locally.
Compatibility
table between chuck and countersink shank diameter
Optional Accessories
Chuck
Appearance*
Countersink Shank Overall Length
of Chuck (mm)
Diameter (mm)
Chuck 6
6
49.5
Chuck 8
8
49.5
Chuck 10
10
49.5
Chuck 12
12
60
*indicates outer appearances of the chucks around the hex. socket head set screw.
47
CUTTING/DRILLING
Pneumatic Hacksaw
SUPER SAW
Model
SSW-110
Special double-piston system provides low vibration
while improving cutting speed!
• Ideal for sawing and trimming operations on sheet metal, aluminum, plastic and other materials
• Suitable for automotive, fabrication, HVAC, electrical and woodworking applications
• Ultra lightweight construction with low vibration performance
• Optimized blade stroke for maximum cutting performance
• Powerful dual piston construction
• Locking throttle lever helps prevent accidental start-up
Specifications
SSW-110
Model
MPa (kgf/cm2)
Air Pressure
Air Consumption (No-load) m3/min
min-1
Stroke Speed
mm
Stroke Length
Capacity (Max. plate thickness) mm
kg
Inlet Size
Mass (Weight)
Accessories Included
0.6 (6)
0.29
7000
11
3
Rc 1/4
0.62
• 2 pieces of 32 mm Saw Blade
• 3 mm Hex. Socket Screw Key
• Bushing R 1/4 x NPT 1/4
Optional Accessories
205 mm
Pneumatic Hand Drill
AIR DRILL
Model
Ref. No.
1
2
3
4
5
6
PN
Description
Sales Unit
TB00759
TB00760
TB00192
TB00193
TA9A011
TA9A005
9 TPI Saw Blade for Gypsum-board
12 TPI Saw Blade for Plywood Panel
14 TPI Saw Blade for Plastic
18 TPI Saw Blade for Plastic
24 TPI Saw Blade for Mild Steel
32 TPI Saw Blade for Mild Steel
10 pcs./set
1
2
3
4
5
6
The power and performance you need to drill deeper and faster
• Ultra high power to weight ratio
• Ergonomically designed to reduce operator fatigue
• Variable speed control
• Reversible
• Designed for industrial and production applications
ADR-65
Model
ADR-100
184 mm
166 mm
137 mm
130 mm
Specifications
Reversible
Change rotation direction by turning the valve as indicated.
Forward
Reverse
Variable speed adjustment
Turn the speed control nut
to change the R.P.M.
Model
ADR-65
MPa (kgf/cm2)
Air Pressure
0.6 (6)
Air Consumption (No-load) m3/min
0.55
min-1(rpm)
Free Speed
2900
Max. drilling Capacity
6.5
Inlet Size
Rc 1/4
kg
Mass (Weight)
0.8
Accessories Included
• Drill chuck (Installed)
• Chuck Handle
• Bushing R 1/4 x NPT 1/4
• Cupla 30SH
ADR-100
0.67
2000
10.0
1.1
Optional Accessory
PN
Description
Sales Unit
TQ10969
Hanger
1 piece
48
SPRING BALANCER
TIGON spring balancer improves
work safety and efficiency
SPRING BALANCER series
The “TIGON” range of spring balancers offer a simple cost effective
solution to take the strain out of handling tools thus improving work
safety and efficiency. The balancer range covers 0.5 to 70 kg tool
capacity with a maximum cable length of 2 meters.
Specifications
HOSE REEL BALANCER series
Model
Capacity
Stroke
Weight
TW-00
TW-0
TW-3
TW-5
kg
m
kg
0.5 - 1.5
0.5
0.2
0.5 - 1.5
1.0
0.5
1.0 - 3.0
1.3
1.4
2.5 - 5.0
1.3
1.5
Model
Capacity
Stroke
Weight
TW-9
TW-15
TW-22
TW-30
kg
m
kg
4.5 - 9.0
1.3
3.4
9.0 - 15.0
1.3
3.8
15.0 - 22.0
1.5
7.2
22.0 - 30.0
1.5
7.6
Model
Capacity
Stroke
Weight
TW-40
TW-50
TW-60
TW-70
kg
m
kg
30.0 - 40.0
1.5
9.8
40.0 - 50.0
1.5
10.4
50.0 - 60.0
1.5
11.6
60.0 - 70.0
1.5
11.8
Functions both as balancer and hose reel
Specifications
Model
Capacity
Stroke
Weight
Hose Diameter
RETRACTOR series
kg
m
kg
I.D. mm
O.D. mm
HW-0
HW-3
HW-5
0.5 - 1.5
1.3
1.6
6.5
10
1.5 - 3.0
1.3
1.7
6.5
10
3.5 - 5.0
1.3
1.8
6.5
10
Handy knob for easy tension adjustment
Specifications
Model
Capacity
Stroke
Weight
49
kg
m
kg
RW-0
RW-3
RW-5
TW-06R
TW-1R
0.5 - 1.5
2.0
0.5
1.0 - 3.0
2.0
0.7
2.5 - 5.0
2.0
0.9
0.2 - 0.6
1.5
0.3
0.5 - 1.5
1.5
0.3
Vibration Level, Sound Pressure Level, and Sound Power Level
Series
Model
AMBL-0307
AMB-0307
Beveler (Pneumatic)
CB-01
CB-02
CBR-03
HB-15B
EMB-0307B
Beveler (Electric)
MB-03A
ECB-0203
AJC-16
JT-20
JEX-20
JC-16
Jet Chisel (Pneumatic)
JEX-24
JEX-28
JEX-2800A
Jet Chisel (Electric)
EJC-32A
Auto Chisel (Pneumatic)
A-300
ACH-16
CH-24
S-250
Air chipper (Pneumatic)
Super Kelen (Pneumatic)
S-500
S-1000
MLG-25
MLG-40
MAGW-40 Lever
MAGW-40 Ring
MAG-50
Myton Grinder (Pneumatic)
MLG-50
MLG-70 Lever
MLG-70 Ring
Myton Sander (Pneumatic)
MLS-20
MAS-40
MAS-70
B-10N
B-20N
B-20NB
B-30N
Belton (Pneumatic)
BB-10A Lever Type
BB-10A Ring Type
BB-20
Line Sander (Pneumatic)
FS-50A
FS-100C
LS-10
Orbital Sander (Pneumatic)
OSV-60A
Free Sander (Pneumatic)
Palm Orbital Sander (Pneumatic)
Air Sonic (Pneumatic)
Super Saw (Pneumatic)
Super Hand (Pneumatic)
Micro Air Hand (Pneumatic)
Burr Cutter (Pneumatic)
APS-125
APS-150
L-25B
L-35C
AL-55
SSW-110
SH-100A
ASH-900
SHL-40
MAH-05
MAH-16
BC-005
m/s2
Measurement
Point
4.1
6.3
4.0
6.2
2.5
4.1
2.5
3.4
2.5
4.6
10.0
4.9
5.9
6.6
7.0
7.0
4.8
15.5
9.0
8.3
11.5
10.5
28
15.0
17.5
11.5
14.5
16.0
15.0
30
66
100
50
29
17.0
58
81
2.5
2.5
6.3
6.3
4.6
6.5
3.6
4.1
3.8
6.2
3.5
7.0
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.7
2.5
6.0
4.6
7.2
5.5
7.4
7.2
3.1
2.5
9.3
6.8
4.8
2.5
2.5
2.5
4.2
Grip
Knob
Grip
Knob
Grip
Grip
Grip
Handle
Grip
Handle
Grip
Knob
Grip
Knob
Grip
Knob
Grip
Grip
Grip
Grip
Needle Guide
Grip
Needle Guide
Grip
Needle Guide
Grip
Needle Guide
Grip
Handle
Grip
Grip
Grip
Grip
Supporting Section
Grip
Supporting Section
Grip
Grip
Grip
Grip
Grip
Handle
Grip
Handle
Grip
Handle
Grip
Handle
Grip
Grip
Grip
Handle
Grip
Grip
Grip
Grip
Handle
Grip L
Grip R
Grip L
Grip R
Grip L
Grip R
Grip
Grip
Grip
Grip
Supporting Section
Grip
Grip
Grip
Grip
Grip
Grip
Grip
Grip
Grip
Grip
Grip
Grip
Vibration Level
Vibration
Standard
EN ISO 20643
Sound Pressure
Level dB(A)
Sound Power
Level dB(A)
87
98
87
98
88
74
99
85
81
92
64
75
84
95
80
91
83
84
84
91
92
95
102
103
81
92
93
104
96
107
94
105
EN 60745-1
EN ISO 28927-9
EN 60745-2-6
EN 28927-9
EN 20643
EN 28927-1
EN 28927-3
EN 20643
EN 28927-3
EN 20643
ISO 28927-3
28927-12
EN 28927-8
EN 20643
85
96
97
86
87
101
108
97
98
112
100
111
99
110
84
88
86
84
95
99
97
95
84
95
89
100
89
100
89
100
85
79
96
90
85
96
78
83
85
89
94
96
82
93
78
89
78
89
85
96
77
85
78
88
96
89
89
100
78
81
76
76
71
71
76
62
71
64
64
89
89
92
87
87
82
82
87
73
81
75
75
100
50
QUICK CONNECT COUPLINGS FOR PNEUMATIC TOOLS
CUPLA
Nitto Kohki supplies various types of air Cuplas to meet all needs of air piping from main supply, relays in factories,
pipe end connections to pneumatic tools, and those of air piping within equipment. The following sketch gives you
some examples of air piping using Hi Cupla Series and may serve as a good reference in selecting appropriate
Cuplas. For more information, please visit http://www.nitto-kohki.co.jp/e/prd/d_cat/ and see our eCatalog here.
Duster Cupla
DCS-65PNG
Twist Plug
TS-20PM
Purge Hi Cupla Nut Cupla
PV-40SM
65PNG
Air Grinders
Purge Plug
PV-40PH
Hi Cupla 200
200-40SH
Hi Cupla BL
65SN-BL
Nut Cupla
65PN
Twist Plug
TS-20PM
Line Cupla 200
200T Type
Air Drill
Plastic Plug
65PN-PLA
Purge Line Cupla
RE-PV-30
Air Drill
Rotary Plug
RL-20PM
NK Cupla Coil Hose
NKC-503B
Hi Cupla Ace
HA-65SN
NK Cupla Hose
NKU-605B
Anti-vibration Plug Hose
SHA-3-2R
Impact Wrenches
Hi Cupla
20PM
Hi Cupla
20PM
Air Screwdriver
51
Blow Guns
Rotary Nut Cupla
65SNRG
QUICK CONNECT COUPLINGS FOR PNEUMATIC TOOLS
• One-way shut-off cupla with an automatic shut-off valve in the socket
• Important parts are hardened for excellent wear resistance and durability
HI CUPLA
Plug
Socket
For hose connection
17PH
20PH
30PH
40PH
400PH
600PH
800PH
For hose connection
For 1/4" hose
For 1/4" hose
For 3/8" hose
For 1/2" hose
For 1/2" hose
For 3/4" hose
For 1" hose
17SH
20SH
30SH
40SH
400SH
600SH
800SH
For female thread connection
10PM
20PM
30PM
40PM
400PM
600PM
800PM
For Rc 1/8
For Rc 1/4
For Rc 3/8
For Rc 1/2
For Rc 1/2
For Rc 3/4
For Rc 1
For female thread connection
10SM
20SM
30SM
40SM
400SM
600SM
800SM
For male thread connection
20PF
30PF
40PF
400PF
600PF
800PF
For R 1/4
For R 3/8
For R 1/2
For R 1/2
For R 3/4
For R 1
For hose connection
For 1/4" hose
For 1/4" hose
For 3/8" hose
For 1/2" hose
For female thread connection
200-20SM
200-30SM
200-40SM
Specifications
• Simple and secure push-to-connect type
• New valve design for low pressure loss to achieve flow rate increase
Socket
200-17SH
200-20SH
200-30SH
200-40SH
For R 1/4
For R 3/8
For R 1/2
For R 1/2
For R 3/4
For R 1
Body material
Stainless steel
Steel(Chrome-plated)
Brass
Size
1/8" to 1"
Thread
1/4" to 1" hose
Hose barb
Working pressure
1.5
1.0
1.5
MPa
15
10
15
kgf/cm2
Seal material
Nitrile rubber
Fluoro rubber
Mark
NBR (SG)
FKM (X-100)
Working temperature range
-20˚C to +80˚C
-20˚C to +180˚C
Remarks
Standard material
For G 1/4"
HI CUPLA 200
For Rc 1/8
For Rc 1/4
For Rc 3/8
For Rc 1/2
For Rc 1/2
For Rc 3/4
For Rc 1
For male thread connection
20SF
30SF
40SF
400SF
600SF
800SF
For male thread connection
20PFF
For 1/4" hose
For 1/4" hose
For 3/8" hose
For 1/2" hose
For 1/2" hose
For 3/4" hose
For 1" hose
Specifications
Body material
Size(Thread and hose barb)
Working pressure
MPa
kgf/cm2
Seal material
Mark
Working temperature range
Remarks
Steel (Chrome-plated)
1/4", 3/8", 1/2"
1.5
15
Nitrile rubber
NBR (SG)
-20˚C to +60˚C
Standard material
For Rc 1/4
For Rc 3/8
For Rc 1/2
For male thread connection
200-20SF
200-30SF
200-40SF
For R 1/4
For R 3/8
For R 1/2
52
QUICK CONNECT COUPLINGS FOR PNEUMATIC TOOLS
NUT CUPLA
• No hose clamp required
• Nut types are available in Hi Cupla Series and Hi Cupla 200 Series
• To mount on hose, simply slide it over the nipple and tighten the nut
Specifications
Body material
Working pressure
Seal material
HI CUPLA ACE
Steel (Chrome-plated), Stainless steel
1.5 MPa (15 kgf/cm2)
Nitrile rubber
• Lightweight plastic coupling with automatic safety lock
• Pressure ratings comparable to steel Cuplas
• Just push plug into socket for simple connection
Specifications
Body material
Working pressure
Seal material
ROTARY PLUG
Engineering plastics (PBT, POM)
1.5 MPa (15 kgf/cm2)
1.0 MPa (10 kgf/cm2) for Model HA-T
Nitrile rubber
• Newly developed rotary function allows 360° swivelling
• Rotary neck plug for hose connection to pneumatic tools and pneumatic devices
• Fits at 45° angle to the tool eliminating annoying offset load caused by connected hose
Specifications
Body material
Working pressure
Seal material
FULL-BLOW CUPLA
Steel (Nickel-plated), Stainless steel
1.5 MPa (15 kgf/cm2)
Nitrile rubber
• Unique full-open gate type valve mechanism realizes low pressure loss and high flow rate,
which reduces required source air volume
• The flow rate is increased by up to 40% more than that of conventional Cuplas
• During connection and disconnection, the valve is closed, enabling connection/disconnection
under zero line pressure
Specifications
Body material
Working pressure
Seal material
LINE CUPLA
Aluminum alloy
1.5 MPa (15 kgf/cm2)
Nitrile rubber
• Enables several air lines to be taken simultaneuosly from one supply line
• Just push in the plug into socket for simple and secure connection
• Choose from the 2-outlet type (Model 200T), the 5-outlet straight type (Model 200L)
and the 5-outlet star type (Model 200S) to suit your application
Specifications
Body material
Cupla
Working pressure
Seal material
Aluminum
Steel (Chrome-plated)
1.5 MPa (15 kgf/cm2)
Nitrile rubber
*For more information, please visit http://www.nitto-kohki.co.jp/e/ and see our eCatalog here.
53
QUICK CONNECT COUPLINGS FOR PNEUMATIC TOOLS
HI CUPLA BL
• Sleeve-lock mechanism prevents accidental disconnection
• Critical structural parts made of steel are heat-treated for increased strength
giving greater durability and resistance to wear
• SN-BL type for connection to urethane hose requires no hose clamp
Specifications
Body material
Working pressure
Seal material
PURGE PLUG
Steel (Chrome-plated), Stainless steel
1.5 MPa (15 kgf/cm2)
Nitrile rubber
• Eliminates an unleasant popping noise and accidental hose whip on disconnection
• Unique design of air purge system enables the residual pressure release quickly and quietly.
• The function is assured even under a high supply pressure or with a long hose
Specifications
Body material
Working pressure
Seal material
ANTI-VIBRATION PLUG HOSE
Steel (Chrome-plated)
1.0 MPa (10 kgf/cm2)
Nitrile rubber
• Protects the Cupla from shocks generated by vibrating tools and
impact tools
• Prevents hard-to-notice flow reduction caused by "Cupla" wear
under continuous vibration
• Flexible rubber hose allows free and wide range of tool motion.
Specifications
Size (Thread)
Inlet (Plug)
Overall length
PURGE HI CUPLA
R 1/4", R 3/8"
Hi Cupla (30PH)
320 mm
• Just push in the plug for connection regardless of internal pressure in socket
• Eliminates an unleasant popping noise and accidental hose whip on disconnection
• Even after connection, lever operation gives perfect control over valve opening/closing
Specifications
Body material
Working pressure
Seal material
ROTARY LINE CUPLA
Brass (Chrome-plated)
1.0 MPa (10 kgf/cm2)
Nitrile rubber
• Multiple outlets are available from single air supply source.
• Sideway air outlets are rotatable to any angle. Possible hose twists can be
eliminated by the component Cupla's swivel mechanism
• Choose either RT type (2 outlets) or RE type (3 outlets) to suit you application
Specifications
Body material
Working pressure
Seal material
Body: Brass (Chrome-plated), Cupla: Steel (Chrome-plated)
1.5 MPa (15 kgf/cm2)
Nitrile rubber
54
Nitto Kohki’s Labor Saving Products
Nitto Kohki is capturing the needs of users by introducing to the world not only “machine tools and power,
“Cuplas” quick connect couplings, and linear-motor-driven piston “compressors/vacuum pumps”.
Professional Tools for Assembling High-Technology Goods
Nitto Kohki’s “delvo” electric screwdrivers are high-quality tools for professional use, with special emphasis on
precise torque control and long-term reliability. “delvo” give you the ability to get it right, every time.
DLV5700 series
• Torque range : 0.02 - 0.4 Nm
• Speed : 450 - 1800 min-1
• Machine screw size : 1.0 - 3.0 mm
• Low-shock for tightening
• Electro-static discharge (ESD) control
DLV5720/5720H/5740
DLV5740H/5750
DLC0350
DLC0950
DLV7104/8104/8204 series
• Torque range : 0.25 - 4.5 Nm
• Speed : 400 - 2000 min-1
• Machine screw size : 2.6 - 6.0 mm
• The clear plastic cover is mounted over the torque
adjustment ring to prevent unintentional changes
of the preset torque amount
• Heavy-duty cam installed for maximum cycle life
DLV7104 series
DLV8104/8204
series
DLV8154
DLV02/12/16 series
• Torque range : 0.03 - 1.6 Nm
• Speed : 700 - 1000 min-1
• Machine screw size : 1.0 - 4.2 mm
• Brushless motors are incorporated for maximum tool life
• Grounded bit system standard
• Universal input voltage from 100 to 240 V AC for easy
installation (DCL16S)
DLV02/12/16SL-CKE
DLV02/12/16SL-BKE
DLC16S
DLV30/45/70 series
• Torque range : 0.4 - 7.0 Nm
• Speed : 650 - 2000 min-1
• Machine screw size : 2.6 - 8.0 mm
• Brushless motor and newly designed clutch provide a
more consistent torque output over the life of the tool
• More accurate torque control and considerably quieter
operation when compared to pneumatic screwdrivers
DLV30SL
DLV30SP
DLV45SL
DLV70LP
*For more information, please visit http://www.nitto-kohki.co.jp/e/ and see our eCatalog here.
55
Nitto Kohki’s Labor Saving Products
tools”, but also next-generation laborsaving devices, including high precision “delvo” electric screw drivers,
Nitto Kohki’s Compressors and Vacuum Pumps
will enhance your system flexibility
Nitto Kohki offers a lineup of various types of compressors and pumps. These include linear-driven,
electro-magnetic diaphragm, DC, and “bimorph” piezoelectric products. Our compressors and pumps are
renowned for being compact and lightweight as well as for their low noise level, clean operation and durability for
longer life. In further applying these technologies, we are also expanding applications to various fields that include
medical, well-being, health devices and environment related equipment.
AC Linear Free Piston Compressor
AC Linear Free Piston Vacuum Pump
DC Linear Free Piston Compressor
DC Linear Free Piston Vacuum Pump
AC Linear Diaphragm Pump
DC Diaphragm Pump
DC Piston Pump
• Compact, lightweight, low vibration, low noise level,
clean operation and longer durability
Piezoelectric Pump
• Compact, lightweight, durable and quiet
• Low power consumption and electromagnetic noise
• Simple flow rate adjustment
DC Diaphragm Liquid Pump
• Built-in pulse absorption chamber
• Many build material options for different liquids
• Self-priming type with air suction acceptable
AC Linear Free Piston Blower
• Linear blowers for aeration
• Low noise and easy maintenance
56
Safety Guide
Be sure to read and understand all safety precautions mentioned below and to follow the instructions given to
operate each Nitto Kohki brand tool as stated in the operator’s manual. Keep operators manual close by when
operating machines or tools for reference of safe operation and precautions.
Safety Precautions
Failure to observe the following warnings may cause a potentially hazardous situation, which if not corrected could result
in serious injury or death. To prevent the risk of fire, electric shock, and/or personal injury, proper safety guidelines
should be followed at all times.
Warning for ALL Machines and Tools
• Always keep the work area free from clutter and potentially dangerous
conditions such as hanging power cords, working debris, air hoses, and
garbage to prevent accidents from occurring.
• Consider proper working environments for each tool carefully. Do not
expose tools to extreme amounts of moisture or direct contact with water
or rain. Keep area well lit at all times to prevent hidden dangers and never
operate the equipment near flammable liquids or in gaseous or explosive
atmospheres.
• Keep all tools and tool accessories away from children and all unauthorized
personnel. Serious injury or possible death may result from machines
being handled by children.
• Properly store machines and accessories while not in use. They should be kept
in a dry, locked-up location out of reach of children or unauthorized personnel.
• Improper or negligent use of tools will cause increased maintenance costs,
and the amount of time in which to complete the job. Always let the tool
do the work at the rate of which it was designed. Best performance is
always achieved by reading and understanding the proper operation of
each machine or tool.
• Always wear safety glasses and protective hand and foot wear during or
around operating tools. Wear a protective hair covering to contain long
hair. Do not wear loose clothing and/or accessories as they may be caught
in moving parts and inflict serious injury or possible death.
• Wear respiratory protection when working in an environment where dust
particles are generated during operation.
• Do not over-reach or allow yourself to become unstable during tool
operation and always maintain a correct posture.
• Use clamps or a vise to secure the work piece tightly and eliminate
vibration. Never hold the work piece with your hands, keep both hands on
the tool for increased productivity.
• Use the right tool or machine that can complete the job within its
specifications. Do not attempt to adapt smaller machines or tools to
complete a job designed for heavy-duty equipment. Do not use the tools
for other than what they were designed for. There is a right tool for each
job, be aware of tool limitations and never overload.
• Make sure to inspect all external screws, nuts, bolts and attached accessories
are fastened tightly and secure prior to each use. All moving parts should be
free from obstruction and allowed to operate smoothly. Any damaged or
missing parts should be repaired or replaced by the sales agent or distributor
from which the tool was originally purchased. Do not use machines or tools
which cannot be activated or stopped with a power switch or lever.
• Do not use any machine with a damaged, frayed, cut, or deteriorated
power cords or air hoses. Always replace at the first sign of damage.
• Always remove all tools required to adjust, add, or remove parts from tools
prior to use to prevent tool damage or user injury.
• Always avoid an unexpected start by having all power buttons or levers in
the off position prior to attaching to a power or air supply. Never carry
tools with your finger on the on/off switch or lever when the power or air
supply is attached.
• Do not use the power or air supply lines to move, carry or support the tool
during usage or transportation. Do not place the power or air line near a
heat source, oil, water, or items with sharp edges.
• Never leave a machine or tool running unattended. Keep a firm grip on the
designated areas of the machine or tool until it comes to a complete stop.
Always turn the power switch or lever to the off position and disconnect
from the power source when not in use.
• Do not disassemble or modify a tool to complete a job other than what it
was designed for. This will void any warranty on the equipment and may
cause serious personal injury or possible death.
• Maintenance is necessary for all machines and tools. Always maintain
blades and cutters properly and replace when edges become damaged or
are not sharp enough for safe operation. Follow the instruction manual for
lubrication needs and adjustment points if applicable. Check the power and
air supply lines periodically and change accordingly to safety regulations.
If an extension line is adopted, always make sure that it meets or exceeds
tool requirements for amperage or air supply before using and is rated for
outdoor usage. Change supply lines whenever they are found to be
defective or damaged. Keep the grip and handles dry and clean of grease
or oil so that it will not disturb proper operation.
• Switch off and disconnect from power source before servicing equipment
or changing accessories.
• Be alert and pay close attention to the work being performed at all times.
Do not operate machines or tools when heavily fatigued. Users should be
aware of all circumstances surrounding their application.
• Use only recommended parts and accessories as per individual machine or
tool operator manuals. Use of improper accessories or attachments may
result in serious injury or possible death.
• All repairs and services must be performed by authorized Nitto Kohki dealers
or technicians.
• Do not deface or remove any label, warning indicator, or nameplate
associated with each machine or tool.
Notice for Electric Tools
Notice for Air Tools
• The power source must be limited to the individual tools specifications as
stated on the nameplate or instruction manual.
• Make sure that all machine and power tools are properly grounded at all times
(excludes double-insulated tools). Always use a GFCI (Ground-Fault-CircuitInterrupt) to protect the user and surrounding persons from electric shock.
• Be aware of low voltage situations. Improperly gauged extension cords or
power cords used or shared with other electrical devices will cause all tools
on the line to not run at optimal performance. This condition may result in
damage to the machine and/or operator.
57
• Air pressure at the inlet of the tool must not exceed 0.6 MPa (6 kgf/cm2).
Index
Model
A A-100
220 - 240 V
A-300
ACH-16
ADR-100
ADR-65
AJC-16
AL-55
AMB-0307
AMBL-0307
AO-5575
220 - 240 V
APS-125
NVL5H
APS-125
NVV5H
APS-150
NVV6H
ASH-900
B B-10N
B-20N
B-20NB
B-30N
BB-10A
Lever
BB-10A
Ring
BB-20
BC-005
BHM-02035
BHM-03050
BHM-13075
BHM-14075
C CB-01
CB-02
CBR-03
CH-24
CLA-2720
220 - 240 V
E E25-0615
220 - 240 V
E55-0619
110 - 120 V
E55-0619
220 - 240 V
ECB-0203
220 - 240 V
EJC-32A
110 - 120 V
EJC-32A
220 - 240 V
EMB-0307B 220 - 240 V
F FS-100C
FS-50A
H HA06-1322
HA07-1624
HA11-1624
HB-15B
220 - 240 V
HB-15B
110 - 120 V
HPD-05
220 - 240 V
HPD-05
110 - 120 V
HS06-1322
HS07-1624
HS11-1624
HW-0
HW-3
HW-5
J JC-16
JEX-20
JEX-24
Prod. No.
Description
Page
013200403
090600001
091800001
160700020
160700030
061100001
184300001
135400001
135600001
016400401
074903001
074900001
075000001
111400001
101810001
101820001
101840001
101830001
101601012
101601010
101700012
136505101
TB00390
TB00392
TB00352
TB00354
136503001
135200001
136502000
091500001
016811401
155500401
155300101
155300501
135800300
065200101
065200301
136010201
080900001
080600001
155700001
155800001
155900001
131000201
131000102
152500401
152500601
152100001
152200001
152300001
169000171
169000181
169000191
060100001
060900001
060300001
Atra Ace
Auto Chisel
Air Chipper
Air Drill
Air Drill
Jet Chisel
Air Sonic
Mini Beveler
Mini Beveler
Atra Ace
Palm Orbital Sander
Palm Orbital Sander
Palm Orbital Sander
Super Hand
Belton
Belton
Belton
Belton
Baby Belton
Baby Belton
Baby Belton
Burr Cutter
Broach Holder
Broach Holder
Broach Holder
Broach Holder
Circuit Beveler
Circuit Beveler
Circuit Beveler
Air Chipper
Atra Ace
Handy Selfer
Handy Selfer
Handy Selfer
Circuit Beveler
Jet Chisel
Jet Chisel
Mini Beveler
Free Sander
Free Sander
Selfer
Selfer
Selfer
Hand Beveler
Hand Beveler
Pump
Pump
Selfer
Selfer
Selfer
Hose Reel Balancer
Hose Reel Balancer
Hose Reel Balancer
Jet Chisel
Jet Chisel
Jet Chisel
14
31
30
48
48
33
45
27
27
11
43
43
43
46
37
37
37
37
39
39
39
47
16
16
16
16
27
28
28
30
5
19
19
19
26
34
34
25
41
41
18
18
18
25
25
17
17
17
17
17
49
49
49
33
33
33
Model
J JEX-28
JEX-2800A
JT-20
L L-25B
L-35C
LO-3550
220 - 240 V
LS-10
M MAG-50
MAGW-40
Lever
MAGW-40
Ring
MAH-05
MAH-16
MAS-40
MAS-70
Japanese
MB-03A
110 V
MB-03A
230 V
MLG-25
MLG-40
MLG-50
MLG-70
Lever
MLG-70
Ring
MLS-20
O OSV-60A
Q QA-4000
110 - 120 V
QA-4000
220 - 240 V
QA-6500
220 - 240 V
R RW-0
RW-3
RW-5
S S-1000
S-250
S-500
SC-05
110 - 120 V
SC-05
220 - 240 V
SH-100A
SHL-40
SSW-110
T TW-0
TW-00
TW-06R
TW-1R
TW-3
TW-5
TW-9
TW-15
TW-22
TW-30
TW-40
TW-50
TW-60
TW-70
W WA-3500
110 - 120 V
WA-3500
220 - 240 V
WA-5000
110 - 120 V
WA-5000
220 - 240 V
WOJ-3200
220 - 240 V
Prod. No.
Description
Page
060500001
060500100
061000001
180800001
184100001
018000401
170300001
074700001
078700003
078700005
111000001
111100001
072900001
072600000
130500100
130500201
075605001
075604001
075606008
075602002
075602001
075607001
074400001
015700101
015700401
015800401
169000141
169000151
169000161
090300000
090100000
090200000
151000601
151000401
110500001
111500001
110800101
169000021
169000011
169002101
169000131
169000031
169000041
169000051
169000061
169000071
169000081
169000091
169000101
169000111
169000121
017400111
017400301
018100102
018100301
016600300
Jet Chisel
Jet Chisel
Jet Chisel
Air Sonic
Air Sonic
Atra Ace
Line Sander
Myton
Myton
Myton
Micro Air Hand
Micro Air Hand
Myton
Myton
Mini Beveler
Mini Beveler
Myton
Myton
Myton
Myton
Myton
Myton
Orbital Sander
Atra Ace
Atra Ace
Atra Ace
Retractor
Retractor
Retractor
Super Kelen
Super Kelen
Super Kelen
Pump
Pump
Super Hand
Super Hand Light
Super Saw
Spring Balancer
Spring Balancer
Rectractor
Rectractor
Spring Balancer
Spring Balancer
Spring Balancer
Spring Balancer
Spring Balancer
Spring Balancer
Spring Balancer
Spring Balancer
Spring Balancer
Spring Balancer
Atra Ace
Atra Ace
Atra Ace
Atra Ace
Atra Ace
33
33
33
44
44
7
42
35
35
35
47
47
36
36
26
26
35
35
35
35
35
36
43
13
13
13
49
49
49
32
32
32
18
18
46
45
48
49
49
49
49
49
49
49
49
49
49
49
49
49
49
9
9
9
9
11
58
POWER TOOLS &
MACHINE TOOLS
NITTO KOHKI CO., LTD.
Head Office
9-4, Nakaikegami 2-chome, Ohta-ku, Tokyo 146-8555, Japan
Tel : +81-3-3755-1111
Fax : +81-3-3753-8791
E-mail : [email protected]
Web www.nitto-kohki.co.jp/e
Overseas Affiliates / Offices
NITTO KOHKI U.S.A., INC.
46 Chancellor Drive, Roselle, Illinois 60172, U.S.A.
For Machine Tools
Tel : +1-630-924-9393
Fax : +1-630-924-0303
For Cuplas
Tel : +1-630-924-5959
Fax : +1-630-924-1174
www.nittokohki.com
NITTO KOHKI EUROPE CO., LTD.
Unit A5, Langham Park Industrial Estate, Maple Road,
Castle Donington, Derbyshire DE74 2UT, United Kingdom
Tel : +44-1332-653800
Fax : +44-1332-987273
www.nitto-kohki.eu/en
NITTO KOHKI DEUTSCHLAND GMBH
Gottlieb-Daimler-Str. 10, 71144 Steinenbronn, Germany
Tel : +49-7157-989555-0 Fax : +49-7157-989555-40
www.nitto-kohki.eu/de
NITTO KOHKI AUSTRALIA PTY LTD
77 Brandl Street, Eight Mile Plains, Queensland 4113, Australia
Tel : +61-7-3340-4600
Fax : +61-73340-4640
www.nitto-australia.com.au
NITTO KOHKI (SHANGHAI) CO., LTD.
Room1506, Suite C, Orient International Plaza,
No.85 Loushanguan Road, Shanghai 200336, China
Tel : +86-21-6415-3935 Fax : +86-21-6472-6957
www.nitto-kohki.cn
NITTO KOHKI (SHANGHAI) CO., LTD. Shenzhen Branch
2005C Shenzhen ICC Tower, Fuhuasanlu 168,
Futian District, Shenzhen, Guangdong 518048, China
Tel : +86-755-8375-2185 Fax : +86-755-8375-2187
www.nitto-kohki.cn
NITTO KOHKI CO., LTD. Singapore Branch
10 Ubi Crescent #01-62, Ubi Techpark Lobby D, Singapore 408564
Tel : +65-6227-5360
Fax : +65-6227-0192
www.nitto-kohki.co.jp/e/nksb/index.html
NITTO KOHKI CO., LTD. Bangkok Representative Office
M&A Business Center, Q-House Convent Bldg.,
38 Convent Rd., Silom, Bangrak, Bangkok 10500, Thailand
Tel : +66-2632-0307
Fax : +66-2632-0308
www.nittobkk.com
NITTO KOHKI CO., LTD. India Liaison Office
3rd Floor, Building No.9-A DLF Cyber City, Phase-III,
Gurgaon, Haryana 122002, India
Tel : +91-124-454-5031 Fax : +65-6227-0192
NITTO KOHKI CO., LTD. Mexico Representative Office
OF1109 Torre Corporativo 1 Piso 11 Central Park Armando Birlain Shaffler
#2001 Col Centro Sur, Queretaro, Qro, C.P. 76090, Mexico
Tel : +52-442-290-1234
ISO 9001
JQA-2042
Machine Tools Division
ISO 14001
ISO 9001
ISO 14001
JQA-EM4057
NITTO KOHKI CO., LTD.
DISTRIBUTED BY
This catalog is printed using environmentally friendly paper and vegetable oil inks.
Specifications and designs are subject to change at any time without notice.
Printed in Japan
16DV06- 1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement