XXD3051 - Remote

XXD3051 - Remote
0A
1 43
Controls and displays
Remote control
&!F~
ECEIMR
1
0
7 MULTICONTROL -
2
3
G5iq
[i)
SEfkT
piiq
pirT
LEVEL
TEST
TONE
EFFECT
Dlh2lER
3 RECEIVER CONTROL buttons
STANDARD
Press for Standard decoding and to
switch between the various Pro Logic II
and Neo:6 options (page 38).
ADVANCED SURROUND
Use to switch between the various
surround modes (page 39).
4
5-
RETURN
7
RECEIVER
Switches the remote to control the
receiver (used to select the features such
as SLEEP, MCACC SETUP, etc). Also use
this button to set up surround sound
(page 44, page 51).
DISPLAY
BAND DTV ON/OFF
CLASS
-
MPX
DTV lNF(
D.ACCES
STEREO/DIRECT
Switches between direct and stereo playback, Direct playback bypasses the tone
controls and channel levels for the most
accurate reproduction of a source
(page 3%
MIDNIGHT/LOUDNESS
Switches to Midnight or Loudness
listening (page 42).
8
CH SELECT
Selects a speaker when setting up the
surround sound of the receiver (page 52).
ml
Rfoneswr
1 RECEIVER6
This switches between standby and on forthis
receiver,
2 MULTI CONTROL buttons
Press to select control of other components
(see Controlling the rest ofyoursysfem on
page 58)
LEVEL +/Adjusts the levels of the surround sound
of the receiver (page 52).
TEST TONE
Sounds the test tone when setting up the
surround sound of the receiver (page 52).
MUTE
Mutes the sound (or restores the sound if
it has been muted).
EFFECT +/Adds or subtracts the amount of effect
with different advanced surround modes
(page 3% @
0A (
um
Controls and displays
FL DIMMER
Dims or brightens the display.
4 MASTER VOLUME +/Use to set the listening volume.
5 Receiver and component control
buttons (Press the corresponding MULTI
CONTROL button first to access).
These controls function according to the
component you’ve selected.
TOP MENU
Displays the disc ‘top’ menu of a DVD.
DTV MENU
Displays menus on a digital TV
AUDIO
Changes the audio language or channel
with DVD discs,
MCACC SETUP
Use to setup your speaker system using
the multi-channel acoustic calibration
system.
MENU
Displays the disc menu of DVD-Video
discs. It also displays TV and DTV menus
INPUT ATT
Attenuates (lowers) the level of an analog
input signal to prevent distortion,
T.EDIT
Use to memorize and name a station for
recall using the STATION +/- buttons
(Page 5%
GUIDE
Displays the guides on a digital TV.
SUBTITLE
Displays/changes the subtitles included
in multilingual DVD-Video discs.
SLEEP
Use to put the receiver in sleep mode and
select the amount of time before the
receiver turns off,
6
++ 8 0 (TUNE +/-, ST +/-) /ENTER
Use the arrow buttons when setting up
your surround sound system (see
page 44). Also used to control DVD
menus/options and for deck 1 of a double
cassette deck player, Use the TUNE +/buttons to find radio frequencies and use
ST +/-to find preset stations (page 55).
7 Component/Tuner control buttons
The main buttons (,, W, etc) are used to
control a component after you have selected
it using the MULTI CONTROL buttons, The
tuner/DTV controls above these buttons can
be accessed after you have selected the corresponding MULTI CONTROL button (TUNER
or TV/SAT (when connected to DTV)).
RETURN
Returns to the last screen selected when
using a digital TV tuner.
BAND DTV ON/OFF
Switches between the tunerAM and FM
bands (page 54). Also switches a digital
TV on/off (page 60).
DTV INFO
Use to bring up information screens on a
digital TV.
DISPLAY
Use to switch the display between the
station preset name and the frequency for
the tuner.
CLASS
Switches between the three banks
(classes) of radio station presets
(Page 5%.
MPX
Switches between stereo and mono
reception of FM broadcasts, If the signal
is weak then switching to mono will
improve the sound quality (page 54).
Controls and displays
D.ACCESS
After pressing, you can access a radio
station directly using the number buttons
(page 54).
8 Number buttons
Use the number buttons to directly select a
radio frequency (page 54) or the tracks on a
CD, DVD, etc.
9 CHANNEL +/Use to select channels when using a VCR,
DVR, etc. Also use to skip tracks backward or
forward on CDs, DVDs, etc.
10 INPUT SELECT
Use to select the input source,
11 LED
This lights when a command is sent from the
remote control.
12 SOURCE(I>
Press to turn on/off other components
connected to the receiver,
13 DISC (ENTER)
The button’s use depends on the component
selected, It can be used to enter commands
for TV or DTV, and can also be used to select
a disc in a multi-CD player,
14 TV CONTROL buttons
These buttons are dedicated to control the TV
assigned to the TV CONT button, Thus if you
only have one TV to hook up to this system
assign it to the TV CONT MULTI CONTROL
button, If you have two TVs, assign the main
TV to the TV CONT button,
Use to turn on/off the power of the TV.
(TV CONTROL) INPUT SELECT
Use select the TV function,
CHANNEL +/Use to select channels,
VOLUME +/Use to adjust the volume on yourTV.
0A
I a
0 ’ ( Controlling the rest of your system
D
Chapter 9:
Controlling the rest of your
system
Setting the remote to control
other components
Selecting preset codes
directly
There are several ways to set your remote to
control the other components in your system.
The easiest way to do this is to assign the
component’s manufacturer preset code
(starting on page 63) to one of the MULTI
CONTROL buttons on the remote control,
The buttons can be set to control the following
components:
DVD or LD player
TV or Satellite tuner
VCR or Digital Video Recorder
CD player
CD Recorder, Tape deck
or MD player
TV or Cable TV tuner
FM/AM tuner
l
The remote control will exit an operation
after 1 minute of inactivity.
1 While pressing the RECEIVER button,
press and hold the 1 button.
The LED blinks,
2 Press the MULTI CONTROL button for
the component you want to control.
The LED lights,
3 Use the number buttons to enter the
preset code (see page 63)
The LED blinks again,
0 ’
I a
Controlling the rest of your system
If the correct code has been input the power
of the component being input will turn on or
off.
The power of the component being input will
only turn on or off if that component is able to
be turned on directly by remote control.
l
l
l
l
You can only input a code for the component type written on each MULTI
CONTROL button (except RECEIVER and
TUNER).
Even if you don’t input a preset code for
theTV (TV/SAT MULTI CONTROL button)
you will be able to control your TV using
the dedicated TV CONTROL on the
remote if you have assigned it to the TV
CONT button,
You may not be able to use a particular
code even if it is listed on page 63.
The remote control buttons will not be
able operate other equipment unless
preset with the method above.
4 Repeat steps 2 through 3 to try a
different code, or to enter a code for
another component you want to control.
5
When you’re done, press RECEIVER.
Direct function
l
Default setting: ON
You can use the direct function feature to
control one component using the remote
control while at the same time, using your
receiver to playback a different component,
This could let you, for example, use the
remote control to set up and listen to a CD on
the receiver and then use the remote control
to rewind a tape in your VCR while you
continue to listen to your CD player.
When direct function is on, any component
you select (using the MULTI CONTROL
buttons) will be selected by both the receiver
and the remote control. When you turn direct
function off, you can operate the remote
control without affecting the receiver,
1 While pressing the RECEIVER button,
press and hold the 4 button.
The LED blinks,
2 Press the MULTI CONTROL button for
the component you want to control.
The LED lights.
3 Use the number buttons to enter
either 1 (direct on) or 2 (direct off).
The LED blinks again,
Clearing all the remote
control settings
4 Repeat steps 2 through 3 for the other
components you want to control.
You can clear all presets and restore the
factory default settings.
5
While pressing the RECEIVER button,
press and hold the 0 button for three
seconds.
The LED blinks three times indicating the
settings have been restored to the factory
presets,
When you’re done, press RECEIVER.
a
l
l
Note
You can’t use direct function for TUNER.
0 ’ ( Controlling the rest of your system
D
Controls for TVs
This remote control can control components after entering the proper codes or teaching the
receiver the commands (see Setting the remote to controlothercomponents on page 58 for more
on this). Use the MULTI CONTROL buttons to select the component,
INPUT
SELECT
Switches the DTV on or off,
DTV
Switches the TV or CATS between standby and on.
Cable TV/Satellite TV/TV
Switches then/ input. (Not possible with all models,)
TV
CHANNEL Selects channels.
+/-
Cable TV/Satellite TV/TV/
DTV
VOLUME
+/-
Cable TV/Satellite TV/n//
DTV
Adjust the TV volume.
TOP MENU Press to display the DTV menu.
DTV
MENU
Select different menus from the DTV functions.
DTV
Select the menu screen.
Cable TV/Satellite TV/TV
AUDIO
Use to switch DTV audio tracks
DTV
GUIDE
Use as the GUIDE button for navigating
DTV
Id+
Use to choose the BLUE commands on a DTV menu,
DTV
II
Use to choose the GREEN commands on a DTV menu,
DTV
Use to choose the RED commands on a DTV menu,
DTV
Use to choose the YELLOW commands on a DTV menu,
DTV
Press to get information on DTV programs,
DTV
Switches DTV on or off.
DTV
Use to select closed captioning with DTV.
DTV
Number
Buttons
Use to select a specific TV channel.
Cable TV/Satellite TV/TV/
DTV
+I0 button
Use to add a decimal point when selecting a specific TV
channel,
DTV
ENTER/
DISC
Use to enter a channel.
Cable TV/Satellite TV/TV/
DTV
b
0 ’
> a
Controlling the rest of your system
++ 0 Q & Select or adjust and navigate items on the menu screen,
ENTER
ENTER brings up the DTV menus,
Press to select or adjust and navigate items on the menu
screen.
EB
l
DTV
Cable TV/Satellite TV/TV/
DTV
Note
The four TV CONTROL buttons on the remote control are dedicated to control the TV
assigned to the TV CONT button. Thus if you only have oneTV to hook up to this system
assign it to the TV CONT MULTI CONTROL button, If you have two TVs, assign the main TV
to the TV CONT button.
Controls for other components
This remote control can control these components after entering the proper codes or teaching
the receiver the commands (see Setting the remote to control other components on page 58 for
more on this). Use the MULTI CONTROL buttons to select the component.
SOURCE6
II
Press to switch the component between standby and on. CD/MD/CD-R/VCR/DVD/LD/
DVR player/Cassette deck
Press to return to the start of the current track,
Repeated presses skips to the start of previous tracks,
CD/MD/CD-R/DVD/LD
player
Play the reverse side of the tape on a reversible deck.
Cassette deck
Press to advance to the start of the next track,
Repeated presses skips to the start of following tracks.
CD/MD/CD-R/DVD/LD
player
Play the forward side of the tape on a reversible deck.
Cassette deck
Pause playback or recording.
CD/MD/CD-R/VCR/DVD/LD/
DVR player/Cassette deck
Start playback.
CD/MD/CD-R/VCR/DVD/LD/
DVR player/Cassette deck
Hold down for fast forward playback.
CD/MD/CD-R/VCR/DVD/LD/
DVR player/Cassette deck
Hold down for fast reverse playback.
CD/MD/CD-R/VCR/DVD/LD/
DVR player/Cassette deck
Stops playback (on some models, pressing this when the CD/MD/CD-R/VCR/DVD/LD/
disc is already stopped will cause the disc tray to open). DVR player/Cassette deck
0 ’ ( Controlling the rest of your system
D
Number
buttons
Directly access tracks on a program source,
CD/M D/CD-R/VCR/LD
player
Use the number buttons to navigate the on-screen
display.
DVDIDVR player
+I0 button
Selects tracks higher than 10. (For example, press +I0
then 3 to select track 13.)
CD/MD/CD-R/VCR/LD
player
ENTER/
DISC
Changes the search mode.
DVD
Chooses the disc.
Multiple CD player
Use as the ENTER button.
VCR
Displays the setup screen for DVR players.
DVR player
Changes sides of the LD,
LD player
MENU
Displays menus concerning the current DVD or DVR you
are using.
DVD/DVR player
?I
Pauses the tape,
Cassette deck
Stops the tape
Cassette deck
ENTER
Starts playback.
Cassette deck
+/a
Fast rewinds/fast forwards the tape.
Cassette deck
c7+ Q Q & Navigates DVD menu/options.
ENTER
DVD/DVR Player
CHANNEL Selects channels.
+I-
VCR/DVD/DVR Player
TOPMENU
Displays the disc ‘top’ menu of a DVD.
DVD/DVR Player
AUDIO
Changes the audio language or channel.
DVD/DVR Player
GUIDE
Displays/changes the subtitles on multilingual DVDs.
DVD/DVR Player
0 ’
> a
Controlling the rest of your system
Preset Code List
You should have no problem controlling a component if you find the manufacturer in this list,
but please note that there are cases where codes for the manufacturer in the list will not work
for the model that you are using. There are also cases where only certain functions may be
controllable after assigning the proper preset code.
El
l
Note
The TV, STB and DTV codes can only be set to the TV/SAT or TV CONT button
DVD
Manufacturer Code
TOSHIBA 001
SONY002
PANASONIC 003
JVC 004
SAMSUNG 005
SHARP 006
AKAI 007
RCA 009,Ol I
DENON 003, 010
HITACHI 012
PHILIPS 013
ZENITH 014
SONY016(videogame)
LOEWE 013
GOLDSTAR 014
MICROSOFT
017(Videogame)
PIONEER 000, 003, 008,
111
LD
Manufacturer Code
SONY 101
PANASONIC 105, 106
PHILIPS 104
KENWOOD 103
MITSUBISHI 100
RCA 107
PIONEER lOO,ll1(DVDLD)
GE 601,608,607,610,617,
6027628,618
PHILIPS 607
SONY604
PANASONIC 607, 608,622
TOSHIBA 605,602,626,621
SHARP 602, 619, 627
HITACHI 606, 610, 624,
625, 618
SANYO 621, 614
MITSUBISHI 609,610,602,
f2n-f
C)L I
GOLDSTAR 610, 623, 621,
602
JVC 613,623
RADIOSHACK 0,623,
621,602
FUNAI 658
GRANDIENTE 630
LOEWE 607
PIONEER 600
STB (SATELLITE/
CATV) [elm]
Manufacturer Code
JERROLD 711,701,702,
712,704,713,703,714,
716,715
S.ATLANTA 705,706,708,
-r\e
NY
ZENITH 707,717, 710
PIONEER 700
TV (TYISATI(TY]
Manufacturer Code
RCA 601,610,615,616,
617,618,661,662,609
ZENITH 603, 620
MAGNAVOX 607, 610,
603,612,629
On digital STB
[TVISATI~]
ManufacturerCode
RCA 201,203
SONY202
ECHOSTAR 205
PRIMESTAR 206
BELL 208
PIONEER 200, 207, 231
DTV [~EFJIJ
Manufacturer Code
PIONEER 229, 207
PANASONIC 230
TUNER
Manufacturer Code
PIONEER 500
VCR
Manufacturer Code
ORION 445,446,424
FUNAI 441
RCA 401,406,408,414,
405,413,411,415, 460 ,
461,462,463,435
ZENITH 403,404,417
MAGNAVOX 414, 408,
426,403
FISHER 410,426,412,427,
A75 A70
lL”l
IL”
PANASONIC 408,432 ,
433
TOSHIBA 405,409,426
JVC 428,430,429,408,414
,431,407
HITACHI 408,401,406,
436,434
SONY416,417,404,408,
457,458,459
MITSUBISHI
409,420,421,422, 423,
424,408,407,456
SANYO 410,412,425,435
SHARP 402,418,419, 456
GOLDSTAR 411,409
OPTIMUS 408,432,433,
402,418,419
GRADIENTE 441
LOEWE 414,432
KENWOOD 456
PIONEER 400
DVD Recorder
Manufacturer Code
PIONEER 456
TAPE
Manufacturer Code
DENON 810
FISHER 813
JVC 802
KENWOOD 804, 807
MARANTZ 82 1
ONKYO 808, 809
OPTIMUS 800
SONY801,806
TEAC 805
TECHNICS 803
YAMAHA 811,812
PIONEER 800
CD
Manufacturer Code
DENON 309,346
JVC 303
KENWOOD 310, 311,321
MARANTZ 323,312,324,
346
O N K Y O 320,308,307
OPTIMUS 300
PHILIPS 312,322,346
RCA 302,319,313
SANYO 313
0 ’ ( Controlling the rest of your system
D
SONY 301, 316, 317,318
TEAC 305,306,327,324,
325
TECHNICS 304, 326
Y A M A H A 315,314,328,
347
PIONEER 300. 345
MD
Manufacturer Code
SONY 901
KENWOOD 903
SHARP 902
TEAC 904
ONKYO 905
DENON 906
PIONEER 900,902,907
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement