Carvin BX 1600 Bass Amplifier Head Operating Manual

Below you will find brief information for Bass Amplifier Head BX 1600. This document covers the features and functions of the BX1600 bass amplifier head. It is designed to provide a comprehensive overview of the amp's capabilities, including its power output, tone controls, effects loop, and direct out options. It is intended to help users understand the various controls and settings available on the BX1600, enabling them to achieve the desired bass tone and volume.

PDF Download
Document
Carvin Bass Amplifier Head BX 1600 Operating Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Class A input stages
  • Bypassable 12AX7 preamp tube
  • Biamp crossover
  • Compressor
  • 9 band graphic EQ
  • Effects loop
  • Direct Out

Frequently asked questions

The BX1600 has a bridge power output of 1000W at 8 ohms and 1600W at 4 ohms.

The biamp crossover feature allows you to use separate speaker cabinets for low frequencies and high frequencies. This feature is activated by turning on the X-OVER switch on the rear panel and selecting the desired crossover frequency using the CROSSOVER FREQ control.

The effects loop allows you to connect external effects processors to the BX1600. To activate the effects loop, simply turn on the EFFECTS switch on the front panel or use the optional FS22 footswitch.
Preparing document for printing…
0%