Product Leaflet
pi UA ORAL A Designed in collaboration with -
== UNS me SR AT me FUNKTION-O NE
BOOTH
"=,
des "КЕ, = 80)
h A A
[= Locp 7
FrLoop2 &
Latch ar Г,
r
ON E he
AA ууу,
Options Rotary fader panel
PRO X Crossfader
The features and layout of the FF-6000 were determined in collaboration
with Funktion One and leading DJs world wide. The result is a mixer which
is of the highest sound quality (frequency response 20Hz - 20Khz +/- 0.5db,
THD + Noise @ 1Khz <0.01%).
The fader panel is plug in and available with linear or rotary faders. There is
also a choice of crossfader, the ALPs crossfader (standard) or the PRO X
crossfader. The FF-6000 is available in any option configuration ready to use.
www.formula-sound.co.uk
MADE IN ENGLAND BY
FORMULA SOUND LTD
- CHESHIRE
Li
Met lie Tat Le tad y
TAD) SCREEN
-
"CHANNEL 4 CHANNEL 3 CHANNEL 2
CR] ACA at noo
ОО OC
Z / Ne at
un » LT -
=) /
AA El:
© *
РОО ся а вл
FF-6000 BACK PANEL
General
Each of the six channels have 2 inputs and there is a separate console mic, the fader panel is romovable
and can have either linear or rotary faders. The master (output) section includes two effects loops linked
to crossfade A and B.
All main switches are illuminated when switched to provide clear visual status also master and cue output
are indicated on separate LED meters. The case is 19" rack mount and 7RU (12.25" high) and 4.33" deep.
Channel features
Six channels each with two inputs, switching between the two inputs is by a switch at the top of the channel.
Channels 1 & 2 are mic (XLR low Z balanced) and line (phono sockets).
Channels 3 - 6 are phono/line (recessed switch selects phono or line) and line (both on phono sockets).
Each input has a separate gain trim on the back panel allowing gain to be set below clipping.
Each channel has a gain pot and 3 band EQ (+6dB to -25dB).
Push switches for routing to crossfader A or B and CUE (PFL) seletcion.
Rotary or linear (60mm) faders on the removable panel.
Master section
2 effects loops associated with crossfade A and B, each with wet/dry, punch and latching switches,
loop swap, mono switch, gain trims, bal/pan and CUE.
Master, Zone and Booth outputs in stereo and Master and Zone also in mono on balanced XLR connectors.
Record outputs on phono connectors.
The effects send and returns are 1/4" 3 pole jack sockets.
Console Mic
The console mic input is on a balanced XLR and has a gain trim, controls include volume, 2 band EQ and
a mic on switch. The console mic is not present in the booth output.
Headphone monitoring
Two headphones outputs are available on 3.5mm and 1/4" jack sockets, controls include volume, CUE mix
and split switch.
Metering
Separate 2 x 12 LED displays for CUE and output level.
Formula Sound Limited
Tel: + 44 (0) 208 900 0947 FAX: + 44 (0) 208 903 8657
e-mail: [email protected]
Website: http://www.formula-sound.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement