JEM K1 Hazer
FICHA TÉCNICA
JEM K1 Hazer
The Jem K1 Hazer is Martin’s top-of-the-line hazer for high
performance applications where a high level of reliability and easy
serviceability is required. Feature-rich and of solid construction, the
Jem K1 provides the ideal combination of continuous operation, long
hang time, and low fluid consumption for greater economy.
F E A T U R E S
•
Designed for service ease
•
Continuous output
•
Output and density level control
•
5000 m³/min haze output
•
Integrated high velocity fan (variable fan speed)
•
600 W heat exchanger
•
2.5 liter fluid capacity
•
Low fluid consumption and longer hang-time for greater economy
•
Water based - no oil residue on light fixtures
•
Automated shut-down procedure to prevent clogging
•
On-board DMX, 3 & 5 pin
•
On-board control panel
•
Fast access set-up mode
•
Optional digital remote control
•
Silent Mode
•
Eco mode extends run time and improves fluid economy
T E CHNI CA L
S P E CI F I CA T I O NS
Physical
Length: 544 mm
Width: 459 mm
Height: 344 mm
Dry weight: 21.5 kg
Performance
Coverage volume: 5000 m3 per minute
Max. operating time at full output (approx.): 17 hours
Operating time: Continuous, automatic level adjustment
Warm-up time (approx.): 5 minutes
Control and Programming
Control options: Onboard control panel with 4-digit display
Control options: Instant or timer-controlled output, 0-100% adjustable output level
Control options: Adjustable Fan Speed Level
DMX channels: 2 (output and fan)
Optional digital remote control: 92765036
Construction
Housing: Steel & aluminum
Heat exchanger: 600 W, direct thermal protection
Fluid System
Fluid pump: Oscillating piston, high pressure
Onboard fluid capacity: 2.5 l
Fluid consumption at peak output: 140 ml per hour
Approved fluids: Jem K1 Haze Fluid™ only
Installation
Orientation: Floor or flying kit
©2015 Martin Professional Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com
Images contained in this brochure have been converted to CMYK and are not necessarily representative of actual colors. Specifications are subject to change without notice
Connections
Power connection: Neutrik PowerCon
DMX data: 3-pin and 5-pin XLR sockets
Remote control: 3-pin locking XLR
Electrical
AC power (EU models): 220-240 V nominal, 50 Hz
AC power (US models): 110-120 V nominal, 60 Hz
Main fuse (220-240 V power): 5 AT
Main fuse (110-120 V power): 10 AT
Typical Power and Current
US model:
120 V, 60 Hz: 675 W, 6.0 A
EU model:
230 V, 50 Hz: 675 W, 3.1 A
Measurements made at nominal voltage. Allow for a deviation of +/- 10%.:
Thermal
Maximum ambient temperature (Ta max.): 40° C
Exterior surface temperature, steady state: 40° C
Max. nozzle temperature: 200° C
Approvals
EU EMC: EN 6100-6-3:2001 - Part 6-3
EU safety: EN 60 335-1:2002
Immunity: EN 61000-6-1:2001 - Part 6-1
ETL approvals (cETLus): UL Std.998, CAN/CSA Std. C22.2 No 104-01
Accessories
K1™ Haze Fluid, 2.5 gal,/9.5 ltr.: 97120411
K1™ Haze Fluid, 4 x 2.5 ltr.: 97120407
JEM K1 Hazer Remote Control: 92765036
Ordering Information
Jem K1 Hazer, 110 V: 92225900
Jem K1 Hazer, 240 V: 92225901
©2015 Martin Professional Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com
Images contained in this brochure have been converted to CMYK and are not necessarily representative of actual colors. Specifications are subject to change without notice

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement