USB Installation Guide
USB Installation Guide
Advantech USB Data Acquisition
Series Installation Guide
The unique design of Advantech’s USB Data Acquisition (DAQ) Series can fulfill demands
on rigid connections between USB cables and the devices, as well as allow modules to be
used with a variety of alternate mounting solutions. The following information will provide
the necessary information and guide you through the basic operations of these kits.
Attaching the Lockable USB Cable
Advantech USB DAQ series feature the lockable cable design to secure the device
connection. To prevent the USB cable from being unplugged accidentally, please insert
the cable into the module, and screw in the two fasteners as shown below.
Dimensions
*Note: Every USB-4700 series data acquisition module comes with a 1.8m lockable
USB cable.
Attaching the DIN-rail Bracket
Advantech’s USB DAQ modules come with a bracket that facilitates the industry standard
DIN-rail mounting. To attach, simply place the bracket firmly on the back, and secure it
by attaching the two screws into the holes as shown below.
(Device)
*Note: Every Advantech's USB data acquisition/hub module comes with a DIN-rail kit.
Attaching the Wallmount Bracket
(Optional)
The wallmount kit can help you hang your modules on the wall or other flat surfaces. To
attach the wallmount bracket, remove all 4 rubber pads on the rear of the module, and
secure it by attaching the two screws into the holes as shown below.
(Screw Terminal)
Removing the Casing
You may need to remove the modules’ outer casing to access the jumpers inside the
module. To remove the casing, you'll have to first remove the rubber padding covering the
screws, and then remove the two screws holding the casing in place, as shown below.
Wallmount kit part number: 1960004544
Attaching a VESA Bracket (Optional)
Use the VESA bracket to mount your module to the VESA-ready appliances, such as
Advantech’s TPC series. To attach, remove all 4 rubber pads on the back, and secure it
by attaching the two screws into the holes as shown below.
VESA bracket part number: 1960005788
USB I/O Modules
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising