Package contents:

NVR USB Mouse

Quick Connection Guide

Connecting your system

1

Mouse

2

Monitor/TV*

3

Router*

DNR110 Series

HD Network Video Surveillance Recorder

4

IP Cameras*

Ethernet Extension Cable*

NOTE: It may take up to

1 minute for cameras to start up and transmit video to your NVR.

5

Power

Power Adapter Ethernet Cable

!

For best performance it is recommended to use a 1080P monitor/TV and set the NVR’s output resolution to 1920x1080.

See the instruction manual for details.

VGA*

OR

HDMI*

Recommended: Connect cameras to NVR

OR

Connect cameras to a PoE

Switch* or Router* on your network. See “Adding cameras from the LAN” on reverse for more details.

Quick Start Guides

FULL INSTRUCTION MANUAL ONLINE

Software and complete instruction manual available on:

flir.com/security/support

Information in this document is subject to change without notice. As our products are subject to continuous improvement, FLIR Systems,

Inc. and our subsidiaries reserve the right to modify product design, specifications and prices, without notice and without incurring any obligation.

E&OE © 2015 FLIR Systems, Inc. All rights reserved.

4-channel configuration shown. Other channel configurations will have the respective number of video inputs.

*Not included/sold separately.

This system features automatic firmware upgrades for enhanced functionality. It is required to upgrade your system to the latest firmware version.

If a firmware upgrade is available:

1. After startup, a notification will appear asking you to upgrade the firmware. Click OK to upgrade.

2. The system will download and install the firmware upgrade. Wait for the firmware update to complete.

The system may restart during the firmware upgrade process.

DO NOT power off or disconnect the power cable during firmware installation.

DNR110_SERIES_QCG_EN_R1

Quick Connection Guide

DNR110 Series

HD Network Video Surveillance Recorder

Using the mouse

Left-click:

• Click to open the Navigation Bar.

Right-click to close the Navigation Bar.

• During split-screen display mode:

Double-click an individual channel to view it in full-screen. Double-click again to return to the split-screen display mode.

• While navigating menus: Click to open a menu option.

Right-click:

• During live view: Right-click anywhere on the screen to open the Quick Menu.

• Within system menus: Right-click to exit menus.

1 2

Adding cameras from the LAN

Follow the steps below to add cameras that are not directly connected to the Power over

Ethernet (PoE) ports on the back of the NVR.

NOTE: Please visit flir.com/security/support for a list of compatible IP cameras.

Setting the date and time

It is important to set the correct time to ensure accurate time stamps on video recordings.

1.

In live view, right-click and click Main Menu.

2.

Log in using the system user name (default: admin) and password (default: 000000).

3.

4.

Click General and select the Date&Time tab.

Playback and search

1.

From live view, right-click and then click Search.

2.

Log in using the system user name (default: admin) and password (default: 000000).

3.

Use the calendar on the right to select the date to playback.

Click select Setting

and

Enter the current time and select your time zone, and click OK

Check DST to enable auto

Daylight Savings Time updates

(Optional) Check NTP to sync your system with an

Internet time server. Click

Manual Update to instantly update the time

5.

4.

Use the drop-down menus to select the channels you would like to playback. Click the display options

( ) to playback multiple channels simultaneously.

Click inside the video bar to select the playback time.

Playback starts immediately at the selected time.

Select the day to playback

1.

2.

Connect the camera to a router or switch on the same network as the NVR.

Right-click and select Device Search. Log in using the admin account (default

User Name: admin; default Password: 000000).

5.

Click Apply to save changes.

NOTE: A constant Internet connection is required to use NTP

Select channels to playback

Using the Quick Menu

Right-click to open the Quick Menu.

Select camera/live display view

3.

Click Device Search.

4.

Check the camera(s) you would like to add.

5.

Click Add. The Status indicator turns green to show the camera is successfully connected.

NOTE: If the Status indicator is red, click .

Update the camera user name, password, ports, and manufacturer as needed.

6.

Click OK to save changes.

Control PTZ cameras (not included)

Control auto-focus cameras (not included)

Adjust color settings

View system information

Start/stop sequence mode

Disable beeping alarms

Search and playback recordings

Open manual recording controls

Add IP cameras over the LAN

Open Main Menu

Click inside the bar to select a playback time.

DNR110_SERIES_QCG_EN_R1