Cleanmate S 800 robotic vacuum cleaner User Manual

Robotic Vacuum Cleaner
Cleanmate S 800
User Manual
Contents
Safety Instructions -----.e..cscsccoaaccocaoracooa arco reco. 1
Product Features 000.000.000.000000.000000000000000000000000000000000 2
Product Components: --------==-e.ecc0c00ccacacorocanacaneconene 4
Main Body and Accessories +++400000000000000000000000000000000000000 4
Main Body Diagram/Dust Bin -00000000000000000000000 000000000 000000 5
Charging Station/Remote Control +..o.00..000000000000000000 00000 6
Display Panel +--.e..e..e0cccrcocorrancarcencenconecneanecaeorecao e 7
Product Operation -----------=-=======cccaccaccnocacaocaocaocanne 8
Battery Charging + ++--eeeeocancaacacanacaaccaceorcorcoc encon 8
Starting Up/Standby/Sleep/Power Off +:0000000000000 0000000000000 9
Scheduling --e..e.ceccccacaacacaccacecacancaceceacecacaoc eee 10
Cleaning Modes ++00400000000000000000000000000000000000000000000000000 11
Water Tank and Mopping Cloth Usage ....0.0000000000000000000 000000 12
Usage of Magnetic Strip -:0Ä0000000000000000000000000 000000000 000000000 13
Product Maintenance::::::::0000000000000000000000000000000000000 14
Cleaning Side Brushes “+ «-e.e..escoccacocaacacenceccaneacencececccee. 14
Cleaning Dust Bin and Filters ++-000000000000000 0000000000000 LEE 14
Cleaning Sensors and Wheels +...0.00000000000000000000 000000000000 000 15
Cleaning Charging Poles +++ ++ + + + + + + = + + + о о о оо ооо ооо ооо ооо вов оввввовое 15
Cleaning Suction Passage and Dust Sensor +++ + + + о + + + оо ооо ооо ооо ооо 15
Troubleshooting®©.+<—<<<<<<<..ere 16
Error Codes for Sensors °:0000000000000000000000000000000000000000000 1 6
Troubleshooting for Motors -0:00.00000000000000000000000000 00000000 18
Battery Removal.......000000000000000000000000000000000000000000000 19
Product Specifications 0 00.000.000000000000000000000000000000000000 19
Safety Instructions
Before using this product, please read the safety instructions and follow all
regular safety precautions.
1. Only authorized technicians can disassemble the product. Users are not allowed to
disassemble or repair the product.
. Only use the original battery and power adaptor of the product for charging. Using an
unmatched adaptor may cause electric shock, fire or product damage.
3. Do not touch the power cord, plug or adaptor with wet hands.
4. Do not use this product in wet or moist environment (any environment with liquid), e.g.
bathroom or laundry.
5. Do not have curtain, or all kinds of wrapping material or part of user's body wound in the drive
wheels.
6. Before use, clear the object on the floor (remove all fragile objects and cords, clothing, papers,
loose cables, as well as make sure to lift curtains and drapes off the floor to avoid any potential
accidents.)
7. Make sure this product is not close to cigarette ends, lighters, matches or any flammables.
8. Never use the product to clean combustible or highly volatile liquids, such as gasoline.
9. Only use the product indoors; do not use it outdoors.
10. If the product needs cleaning, clean it after it is fully charged.
11. Do not over-bend or press the flexible cord with heavy or sharp objects.
12. Do not sit on top of this product or attach an abject on the top of it. Beware of children or pets
while the product is in operation mode.
13. Do not place this product where it is easy to drop off (tables, chairs, etc.).
14. Turn off the power switch during product transportation or when you don't need to use this
product for a long time.
15. Before charging, check the adaptor and outlet whether these are properly connected.
16. To avoid tripping, all people in the house should be noticed when this product is on.
17. When dust bin is full, empty it before use.
18. Use this product in temperature from 0 °C to 40°C.
19. Do not use this product in high-temperature environment or under baking sunlight for a long
time.
20. The battery must be removed from the product before it is scrapped.
21. The battery should be disposed of properly for safety sake.
22. The adaptor must be removed from the socket-outlet before cleaning, maintaining the
appliance or removing the battery.
N
Warning:
When the appliance is to be used by a child, the child must be of 8 years old and above. For persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge, proper supervision
or instruction should be given concerning use of the appliance in a safe way to help them understand the
hazards involved. Children should not play with the appliance. Cleaning and user maintenance should not
be made by children without supervision.
Product Features
Powerful Suction & Intelligent Suction Adjustment
Powerful Suction
Suction power of this product is strong enough to ensure that even tiny dust on the floor will be
cleaned thoroughly!
Intelligent Suction Adjustment
This product is able to automatically adjust its suction power when different floor environments are
detected. This ability not only make cleaning more efficient, but also helps to save more power (up to
30%).
User Friendly Design
Operation is greatly simplified,
Touch the (a?) button, and you
can start the robot!
Washable Dust Bin
Dust bin and filters can be washed by water.
Simply wash dust bin under water after use to
avoid dust blowing in the air to cause a second
pollution!
Various Cleaning Modes
Four cleaning modes are provided to meet your - "
needs. Т
1. Auto cleaning mode
The robot will clean your room automatically and
adjust its cleaning behavior based on specific
situations.
Product Features
2. Spot cleaning mode
The robot will clean intensively in a spiral way when it detects a very dirty area.
Le a |
| |
3. Edge cleaning mode
In this mode the robot will clean along the wall or obstacles.
4. Scheduling mode
After being scheduled, the robot will leave the charging station and start working
at the scheduled time.
Product Components
Main Body and Accessories
Z
O
Description QYT
Main Body
Charging Station
Adaptor
Remote Control (battery not included)
Water Tank and Moping Cloth each one piece
HEPA Filter
Cleaning Brush
Side Brushes *2 and Spare Brushes*2
User Manual
o|0|0|N|JOjJUI|ASJO|N JA
MD |A | AS JA |A JA JA (A A | —
—
Magnetic strip
Product Components
Main Body Diagram
Right wheel
Right side brush
Suction passage
Button battery cover
Power switch Battery cover
Bottom cover
UV light
Left wheel
niversal wheel
Charging socket
Auto-charge pole
eft side brush
Dust bin
HEPA mer \
HEPA filter "2e
5
Product Components
Charging Station
Power light
Charging socket
harging poles
Remote control
a N
ON/OFF 1
1. ON/OFF
2. Direction button O
3. Spot cleaning O, > 2
4. Auto charging
5. Cleaning mode LY >
4 (Cone! MODE spor) 3
J
A. Install two AAA type batteries into the remote control before use.
B. The big round button in the middle of the 4 direction buttons, is a blank button
without any function.
C. Remove the batteries if the remote control will be left unused for a long period.
D. If you use the remote control near the charging station, the robot may not recognize
the command and may not work.
Product Components
Display Panel
LH
0 00 Q=0 000
о © O
моло cn == ==
ИИ и
LED Panel
1. " НО: DD " LED panel
LED pane shows the time setting, charging status and error codes by using
numbers, letters or graphs.
Buttons
2. UV " UV light button
In standby mode, press this button to preset the UV light status (on/off).
When robot starts cleaning, the UV light will turn on/off as preset.
3." PLAN " Schedule button
Press this button to enter/quit scheduling mode.
O
4." (cen) " Clean button
A. Press this button to change from sleeping mode to standby mode.
B. In standby mode, press this button and hold it for more than 3 seconds to go into
sleep mode.
C. Confirm schedule setting in scheduling mode.
D. Start cleaning in standby mode.
5." "С " Auto homing / number increment button
OS
A. Press this button to increase number in scheduling mode.
B. In other mode, press this button to start auto-noming and charging mode.
6." SIT " Spot cleaning / number decrement button
Y]
A. Press this button to decrease number in scheduling mode.
B. In other mode, press this button to start spot cleaning.
Product Operation
—
1. Battery Charging CCE =
A. Charging station placement AZ
Place charging station against the wall and HT и \ X
remove obstacles from within 1 meter at both ZZ Ar 24
/
sides and about 2 meters in front of the station, a
/
~~
~~
as shown in the right figure. >-- -
—
— р
== ост === „= «=
B. If the robot has been shut down, power on the robot by pressing the power switch
at the right side of the robot for more than 3 seconds.
C. Charge the robot in either way as shown below:
a. Insert the adaptor into the robot and the plug at the other end to the power
socket as shown in Fig a.
b. Press" HOME " on robot or "HOME" on remote control to operate the robot to
go back to the charging station for recharging as shown in Fig b.
Note:
a. When robot is being charged, LED panel will gradually show '1111', from left to
right.
b. Once charging is complete, LED panel will show 'FULL".
c. In the standby status, the robot will broadcast voice "please charge” when battery
power is low.
d. In the working status, the robot will return to charging station automatically when
battery power is low.
For extending battery life:
a. Before first use, charge the robot for 12 hours.
b. Charge the robot as soon as battery power is low.
c. The robot will return to charging station automatically when it accomplishes
cleaning or battery power is low.
d. If the robot is not to be used for a long time, fully charge the battery before use,
turn the power off, remove and store it in a cool, dry place.
e. If the robot is not to be used for more than 3 months, charge the robot for 12
hours, turn the power off, remove and store it in a cool, dry place.
8
Product Operation
2.Starting Up/ Standby/ Sleep/ Power Off
A. Starting up
a. Keep pressing the power switch at the right sideof the robot for more than 3
seconds.
b. Press (2) on main body or ON/OFF on remote control to start cleaning.
Note: If robot is in sleeping mode, press (2) on main body or ON/OFF on
remote control to wake up the robot from sleep mode; then press €» again,
the robot will start cleaning automatically.
B. Standby
Standby means robot has its power switched on, wait for the user's operation. It
can be changed to standby mode by one of the following methods:
a. During robot cleaning, press (2) on main body to enter standby mode.
. During robot cleaning, press ON/OFF button on remote control to power off the
robot.
o
C. Sleep
In sleep mode, the robot can only be woken up from (a2=) button on main body
or ON/OFF on remote control. In order to save power, you can turn the robot into
sleep mode from standby mode via either of the following methods:
a. Press @&~) on main body and hoid it for 3 seconds.
. Robot will automatically enter sleep mode if no command is received for more
than 60 seconds.
o
Product Operation
3.5cheduling
You can schedule the robot and set it to start cleaning automatically at a certain
time every day.
Note: The robot can only be set when it is in Standby or Charging mode. If the
robot is in sleep mode, press (a2x) on main body or ON/OFF button on remote
control to wake up the robot. If the robot is in Cleaning mode, stop it before
scheduling.
Scheduling by the LED panel on robot
A. Setting Robot Clock
a. In standby or charging status, press ran to start the clock-setting. The LED
panel will show the current system time.
b. Press Sw) to enter the hour-setting mode, the left two numbers on LED panel
will flash. Press to increase hour or to decrease it.
c. Press (as) again to enter the minute-setting mode, the right two numbers on
LED panel will flash. Press to increase it or to decrease it.
d. Press (a) again to confirm the setting.
B. Setting scheduling time
a. In standby or charging status, press man twice to start scheduling, LED panel
will show previous scheduled time or "00:00" if there is no previous schedule.
b. Press @&n) to enter hour-setting mode, the left two numbers on LED panel will
flash. Press to increase hour or to decrease It.
с. Press (a?) again to enter the minute-setting mode and the right two numbers
on LED panel will flash. Press to increase minute or to decrease it.
а. Press @8&) again to confirm the scheduling.
C. Cancel scheduling
Set the scheduling time to 00:00.
Note:
a. Before scheduling, please set the robot time to be the same with real time.
b. The robot will start cleaning at the schedule time of Robot Clock every day.
10
Product Operation
4. Cleaning Modes
1). Auto cleaning
In this mode, the robot will clean a room automatically and
adjust its cleaning mode according to the environment.
Note:
Press ON/OFF on remote control or @&® on robot to start
auto cleaning.
2). Spot cleaning
Under the following situations, the robot will activate
spot cleaning:
a. When it detects a very dirty area.
b. Pressing SPOT on remote control or on the
robot.
Note:
It is suggested that the user select spot cleaning in a
very dirty area.
3). Edge cleaning
In cleaning mode, press MODE button to select mode 3 for
edge cleaning. The robot will clean along the obstacles.
4). Zig-Zag Cleaning
Robot will automatically goes into Zig-Zag cleaning when -
it detected it's in an open area or the enviroment with
less obstacles.
y
Note: Press MODE button on remote control to select cleaning mode:
A. Mode No. 1111 shows on robot LED display: spiral cleaning mode;
B. Mode No. 2222 shows on robot LED display: auto cleaning mode;
C. Mode No. 3333 shows on robot LED display: edge cleaning mode;
D. Mode No. 4444 shows on robot LED display: Zig-zag cleaning mode.
11
Product Operation
Water Tank and Mopping Cloth Usage
1. Attaching mopping cloth
Stick mopping cloth on the bottom of water tank as shown in fig 1. Make sure
the sticking side and mopping cloth face the appropriate sides, and then stick
the mopping cloth on its sticking side.
2. Fill water tank with water
Take out rubber plug of water tank, fill it with water, and then put back the rubber
plug tightly in position to prevent water leakage.
3. Fit water tank on the robot
Turnover the robot, fix the water tank on the robot bottom. Make sure the bolts
are firmly pressed into the fixing slots.
Ads В
> | | ep > La =,
U e ~~ N
N
1 L rubber cap
== E pion
un wi A У
fig1 fig 2
Note:
a. If use water tank kit during cleaning, please check if water tank and its mopping cloth is used
according to above instruction. Pay attention to well stick the mopping cloth, avoid friction
betweem the cloth and robot wheel.
b. Water tank kit can only be used on flat floor without any sharp object.
c. Please don't clean carpet, wooden floor or dry only area by the cleaner with water tank.
d. Please turn off UV light if use water tank kit during cleaning.
12
Product Operation
Usage of Magnetic Strip
1. Function of Magnetic strip
There is magnetic sensor inside the robot, when it detect there is magnet, robot
will automatically change direction or turn back. The magnetic strip will let you
decide where your robot can go and where it should "keep out" . During robot
cleaning, easily stick the magnetic strip to fit doorways, around pet bowls,
cords, or anywhere you don't want the robot to go. For example, stick the
magnetic strip in front of the washing room, robot will not go into it.
2.How to use the magnetic strip
Peel off the paper on back of the magnetic strip, stick the strip on floor. Please
Kindly be noted to well clean the magnetic strip sticking area on the floor, just to
ensure it sticks well.
A. Take out the magnetic strip and
put it flat on the floor.
|Z
| x
7
B. Peel off the paper on back
of the magnetic strip.
C. Stick magnetic strip where
you need the robot to "keep
out”.
13
Product Maintenance
1. Cleaning Side Brushes
Clean the side brush when it gets dirty and replace it if it's damaged. Max life span for
side brush is 12months.
Note: Before replacing side brushes, check and make L/R mark on side brush match with the L/R
mark on the bottom base of the robot .
2. Cleaning Dust Bin and Filters
Empty and clean dust bin after each use following the steps as shown in the figures
below:
Press
D. Open dust bin cover,
take out primary filter.
F. Wash dust bin and filter,clean the G. Install the primary filter and HEPA
HEPA with brush. back into the dust bin.
Note:
a. Wash HEPA filter after used for 15~30 days. Max life span for HEPA and filter is
24 months.
b. Reinstall the HEPA and primary filter after they are fully dry.
c. HEPA and primary filter could be replaced if needed.
d. Do not dry the filters under baking sunshine.
14
Product Maintenance
3. Cleaning Sensors and Wheels
Slightly wipe all the sensors and wheels, as marked in figure below, with soft
cleaning cloth or tool.
4. Cleaning Charging Poles
Clean the charging poles, as marked in the figure below, with soft cleaning cloth
or tool.
5. Clean Suction Passage and Dust Sensor
Clean the suction passage and dust sensor, as marked in figure below, with soft
cleaning cloth or tool.
Note:
Avoid allowing the sensors to get wet.
15
Troubleshooting
Error Code for Sensors
Cause Solution
Error Code
AUBF
Suction passage blocked
Clean sution passage
AUBN
Dust bin not placed in position or robot without dust bin
Put back dust bin and place it in position
E1XX
Left collision switch fault
E2XX
Right collision switch fault
E3XX
Left and right collision switches fault
Check sensitivity of the front bumper
E4XX
Left wheel off the ground
Put robot on solid ground
ESXX
Left wheel off the ground, left collision switch
fault
EOXX
Left wheel off the ground, right collision switch
fault
E/XX
Left wheel off the ground, left and right collision
switch fault
Put robot on solid ground and check
sensitivity of the front bumper
ESXX
Right wheel off the ground
Put robot on solid ground
E9XX
Right wheel off the ground, left collision
switches fault
EAXX
Right wheel off the ground, right collision switch
fault
EBXX
Right wheel off the ground, left and right collision
switches fault
Put robot on solid ground and check
sensitivity of the front bumper
ECXX
Left and right wheel off the ground
Put robot on solid ground
EDXX
Left and right wheel off the ground, left collision
switch fault
EEXX
Left and right wheel off the ground, right collision
switch fault
EFXX
Left and right wheel off the ground, left and right
collision switch fault
Put robot on solid ground and check
sensitivity of the front bumper
EXX1
Left anti-drop sensor detects cliff
EXX2
Front anti-drop sensor detects cliff
Clean bottom anti-drop sensor
EXX3
Left and front anti-drop sensors detect cliff
Clean front sensor lens and bottom
anti-drop sensor lens
EXX4
Right anti-drop sensors detects cliff
EXX5
Left and right anti-drop sensors detects cliff
Put robot on ground and check front
bumper
EXX6
Front and right anti-drop sensors detects cliff
EXX7
Front, left and right anti-drop sensors detect
cliff
Clean front sensor lens and
bottom anti-drop sensor lens
16
Troubleshooting
Error Code for Sensors
Error Code Cause Solution
EXX8 |Front bumper right infared sensors detect obstacle Clean front bumper sensor lens
EXX9 Left anti-drop sensor detects cliff, front bumper right
infared sensor detects obstacle
EXXA Front anti-drop sensor detects cliff, front bumper
right infared sensor detects obstacle
EXXB Left and front anti-drop sensors detect cliff, front bumper
right infared sensor detects obstacle
EXXC Right anti-drop sensor detects cliff, front bumper right
infared sensor detects obstacie
Left and right anti-drop sensors detect cliff, front bumper
EXXD right infared sensor detects obstacle
EXXE Right and front anti-drop sensors detect cliff, front bumper
right infared sensor detects obstacle
Clean front sensor lens and
bottom anti-drop sensor lens
Front,left and right anti-drop sensors detect cliff, front
bumper right infared sensor detects obstacle
EXXF
EX1X [Front bumper left infared sensor detects obstacle
EX2X [Front bumper middle infared sensor detects obstacle
EX3X | Front bumper left and middle infared sensors detect
obstacle
EX4X |Front bumper right infared sensor detects obstacle
EX5X | Front bumper left and right infared sensors detect obstacle
EX6X Front bumper middle and right infared sensors detect
obstacle
EX7X | Front bumper left, middle and right infared sensors detect
obstacle
EX8X |Front bumper wall detection infared sensor detects obstaclg Clean front bumper sensor
EX9X | Front bumper wall detection sensor and left infared sensor leans
detect obstacle
EXAX | Front bumper wall detection sensor and middle infared
sensor detect obstacle
EXBX Front bumper wall detection sensor, left and middle infared
sensor detect obstacle
EXCX | Front bumper wall detection sensor and right infared
sensor detect obstacle
EXDX Front bumper wall detection sensor, left and right
infared sensors detect obstacle
EXEX Front bumper wall detection sensor, right and middle
infared sensors detect obstacle
EXFX Front bumper wall detection sensor, left, right and
middle infared sensors detect obstacle
17
Troubleshooting
Troubleshooting for Motors
Error Code Cause Solution
LO1X | Fan overloaded Check if fan is pressed,and clean dust bin
LOX1 | Left wheel overloaded
|. 0X2 |Right wheel overloaded
LOX3 |Left and right wheels overloaded
LOX4 |Left side brush overloaded
LOX5 |Left wheel and left side brush overloaded
LOX6 |Right wheel and left side brush overloaded Check if it is stuck or wired by
LOX7 |Left and right wheels, left side brush overleaded obstacles
LOX8 [Right side brush overleaded
LOX9 [Left wheel and right side brush overleaded
LOXA [Right wheel and right side brush overleaded
LOXB | Left and right wheels, right side brush overleaded
LOXC | Left and right side brushes overleaded
LOXD | Left wheel, left and right side brushes overleaded
LOXE | Right wheel, left and right side brushes overleaded
LOXF |Left and right wheeles, left and right side brush overleaded
Note:
1. There is no problem for the robot when it displays LOO0O.
2. Xis the number or letter might appear on display for different fault.
3. If robot displays E001 or E004, please directly find the relative solution referred in
troubleshooting.
4. |If robot displays ECO7, please find ECXX and EXXX for relative solution referred in
troubleshooting.
5. Like wise, if robot displays EE91, please find EXX1, EEXXand EX9X for relative
solution referred in troubleshooting.
6. If above solution does not work, please try below:
a. Reset the robot by switching off the unit and then turn it on, and check again.
b. If it still does not work after reset, contact after sales.
7. UV light might hurt your eyes, so please do not stare directly at the light when
turned on.
18
Battery Removal
A. Remove the screws on battery cover with a screw driver.
B. Remove the battery cover.
C. Grasp the insulating tape at two sides of the battery and lift the battery.
D. Unplug the wire connector that links battery and robot.
Product Specifications
Classification Items Detail
Mechanical Diameter 340mm
Specifications | Height 85mm
Weight 3.4Kg
Electrical Power Rating 24V, 600mA
Specifications | Battery Specifications — | Ni-MH 2000mAH, 14.4V
Dust Bin Capacity 0.5L
Cleaning
Specifications Charging Type Auto Charging/ Manual Charging
Cleaning Mode
One key to clean & remote control
selection
Charging Time
About 200~300 mins
Cleaning Time
90 minutes at maximum
Main Body Button Type
Touch (LED display)
Note: Particular specifications are subject to change without prior notice.
">