Release Notes

Release Notes
Release Notes
February 14, 2016 (v.2.0.8 - AdmiQ, Cardio Training and DesiQner)



Added resend training reports to specific email
Various improvements
Various bugs fixed, including:
o In some cases average heartrate for Smart Sensors was too low.
o Editing belts created in another club of a chain.
o Vertical Scrollbar in DesiQner Session Sharing view
o Tooltips in DesiQner Session Design Control panel
December 30, 2015 (v.2.0.7 - CT only)



Fixed that Recovery Time was not always shown on reports.
Date and Time is now printed in local format on reports.
Fixed that in some cases data was not uploaded resulting in wrong error message
“Insufficient Disk Space”.
December 21, 2015 (v.2.0.5 - CT only)

Fixed that a Cardio Training session could not finish if a belt had not signed in.
December 20, 2015 (v.2.0.4)








Improved performance when viewing training Data in AdmiQ.
Added feature: Send report to specified email.
Improved performance when downloading session list to Cardio Training and improved
information to instructor when cloud connection fails.
Added vertical scrollbar in Team Receiver Configuration panel for access to configuration of
more than 5 receivers.
Participants now get report if they check out before end of session (BasiQ and BiQing mode).
When heart rate max is changed during session then it is now added to the training report.
Initials are now shown on Training Effect graph on Summary Report.
Various other improvements.
November 20, 2015 (v.2.0.3)





Fixed that participant data was not synchronized from cloud in some cases. Furthermore,
synchronization is initiated when ‘Start Session’ is pressed.
Added ‘Refresh Participants’ button in Cardio Training for manual refresh of all participants.
Added missing translated texts N, DK, S, PL, DE.
Fixed mix of language bug in reports.
Added correct time to reports.
Revision 20Nov2015
1/2
Release Notes




Improved data upload from clients to cloud.
Fixed that a participant can get more reports from the same session in Qntinuous mode.
Better visibility of status in AdmiQ Training Data view.
Fixed issue when sending Summary Report with no participant marked as instructor
November 05, 2015 (v.2.0.2)




Detection and indication of Team Pod connection fixed.
Calories calculation issue fixed.
Participants did not always check out in Qntinuous mode.
Issue related to storing participant data on disk solved.
November 01, 2015 (v.2.0.1)






Shared sessions available again.
Error when saving data fixed.
Queued reports and Movescount upload now available.
Filtering of CT advertisements corrected.
Added Release Notes link to Application Update dialog.
Various minor bug-fixes.
October 25, 2015



DesiQner media folder now available again.
Cardio Training freeze problem fixed.
Report emailing and Movescount upload fixed.
October 19, 2015 (v.2.0.0)
General

New iQniter Smart Sensor belt
,
o Requires new iQniter Team Receiver.
o Bluetooth Smart product - for use with iQniter Cardio training, Bluetooth devices
and Smartphone cardio App’s.
o Compatible with Suunto connected family (ex. Ambit 3 watches and Movescount
App, iPhone, Android).
o Supports training outside the club
 Can store your moves and upload later.
 Can pick up data while in water, ex swimming.
o We recommend Use the smart sensor belt with new club installations. If you want to
support iQniter Smart Sensor Belts (BLE) in an installation with Suunto Team Pod,
you need to install an extra iQniter Team receiver.
Revision 20Nov2015
2/2
Release Notes








New iQniter Team Receiver
o Supports both iQniter/Suunto Dual Belts (ANT) and iQniter Smart Sensor belts
(requires BasiQ+ or BiQing license subscription).
o Removes the present limitation related to maximum number of participants when
using more iQniter Team Receivers in the club and having BasiQ+ or BiQing license
subscription.
o Can operate together with the Team Pod
o We recommend Use the iQniter Team Receiver with new club installations or if you
want to support iQniter Smart Sensor belts (BLE) in an installation with Suunto Team
Pod, install a supplying iQniter Team receiver.
BasiQ+ license subscription now gives access to:
o Smart Sensors (Bluetooth).
o Advertising Video.
Easier installation and less support requirements.
o Fewer requirements to open ports in the club’s network firewall.
o Easier installation and recovery. All data in the cloud. No need to install local SQL
Express database. AdmiQ requires connection to iQniter cloud and will not operate
offline.
All data including training database is stored in cloud. Upload to Movescount and sending of
emails now handled from iQniter cloud.
Movescount App for iPhone or Android.
Low battery on belt indication - Heart rate belt/smart sensor low battery level is now shown
on the participant’s tile on the Group Screen and added to the individual training report.
The participant’s Recovery Time after a training session is added to the Individual Training
Report.
Various improvements and bug-fixes.
Cardio Training


Prepared for Watts, RPM and %FTP supported for Keiser m3i bikes (Keiser Multi-Bike
Receiver and BiQing license required). Final release later in 2015.
Low battery level of the participant’s heart rate belt/smart sensor displayed on the Group
Screen.
AdmiQ


Administrator login on club and chain level (selected tabs in AdmiQ).
Cardio Training settings can now be individually set on each computer and can be managed
from AdmiQ on chain, club, and computer level.
o Facilitates editing of individual Cardio Training settings from AdmiQ. Setting lock
feature is available as an option to prevent unintended change of setting values in
Cardio Training.
Revision 20Nov2015
3/2
Release Notes
The Local (Customized) Exertion Scale and Texts setup have been moved to the
Cardio Training Settings tab.
o The ‘Save All Settings’ button in Cardio Training can now be disabled from AdmiQ.
Training Data (previously named Stored Sessions) is downloads from the cloud to AdmiQ for
viewing.
Added option for resending Session Summary reports to specified emails.
Added option for adding the participant’s FTP (Functional Threshold Power) to their member
profile, which is used to display the participant’s FTP percentage on the Group Screen. (for
use with Watts and RPM training later this year)
Added option for entering iQniter Smart Sensors.
Internet connection is required for operation.
o





Revision 20Nov2015
4/2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising