Workman® HD Series Specifications

Workman® HD Series Specifications
Workman HD Series Specifications*
®
WORKMAN HDX, NO BED, MODEL 07366
WORKMAN HDX, W/BED, MODEL 07367
WORKMAN HDX W/BED, MODEL 07367TC
WORKMAN HDX - 4WD, MODEL 07370
WORKMAN HDX - 4WD, MODEL 07370TC
WORKMAN HDX - D, MODEL 07368
WORKMAN HDX - D, MODEL 07368TC
WORKMAN HDX - D - 4WD, MODEL 07371
WORKMAN HDX - D - 4WD, MODEL
07371TC
B&S Daihatsu 950G EFI, 31.5 hp (23.4 kw),
4-cycle, liquid-cooled, 950 cc, 3-cylinder,
overhead camshaft, counterbalanced gasoline
engine. Mechanical governor regulates to a
maximum of 32 hp at 3600 rpm. Rear engine
location direct coupled to a transaxle. 12-volt
electric starter. Fuel Injection is a closed loop
system with oxygen sensor to adjust air/fuel
ratio and manifold pressure sensor to adjust for
altitude. Full pressure lubrication with spin-on oil
filter. Exhaust emissions meet 2010 EPA, CARB
and California Blue Sky regulation.
B&S Daihatsu 950D, 3-cylinder, inline vertical,
4-cycle, liquid cooled, counterbalanced diesel
engine. 24 hp (17.9 kw); governed to a maximum
speed of 3600 rpm. Mechanical centrifugal
governor. 58.0 cu. in. (950 cc) displacement.
Rear engine location. Direct couple to transaxle.
12-volt electric starter. Full pressure lubrication
with spin-on oil filter. Meets EPA Tier IV
compliance.
®
ENGINE
CLUTCH 6.7” (17 cm) clutch and pressure plate
Fuel and coolant temperature gauges.
Hour meter. Oil pressure, check engine and
INSTRUMENTATION battery charge indicator lights. Tachometer
and speedometer.
ALTERNATOR 60 amp with electronic regulator
Front: 20” x 9” - 12, 6-ply rating, turf tread
TIRES Rear: 24” x 12” - 12, 6-ply rating, turf tread
®
WORKMAN HD, MODEL 07369
Kohler Model CH23, 2-cylinder, 4-cycle,
air-cooled engine. 23 hp (17.2 kW) @
3600 rpm governed to a maximum
speed of 3600 rpm by an internal
governor. 41.1 cu. in. (674 cc)
displacement. Electronic ignition. Rear
engine location direct coupled to a
transaxle. 12-volt electric starter. Full
pressure lubrication with spin-on oil
filter. Meets exhaust and evaporative
emissions for 2010 EPA and CARB.
®
6.7” (17 cm) clutch and pressure plate
6.7” (17 cm) clutch and pressure
plate
Fuel and coolant temperature gauges.
Hour meter. Oil pressure, glow plug and
battery charge indicator lights. Tachometer
and speedometer.
Fuel gauge, hour meter, oil pressure
warning light and battery charge
indicator light. Tachometer /
speedometer optional.
60 amp with electronic regulator
25 amp with electronic regulator
Front: 20” x 9” - 12, 6-ply rating, turf tread
Rear: 24” x 12” - 12, 6-ply rating, turf tread
Front: 20” x 9” - 12, 6-ply rating, turf tread
Rear: 24” x 12” - 12, 6-ply rating, turf tread
Aluminum radiator with 10 fins per inch dual pass. Right side mounted with removable
COOLING SYSTEM screen for debris cleaning. Thermal controlled DC electric fan.
AIR CLEANER Remote mounted, heavy-duty 2-stage air cleaner with evacuator valve.
Fan forced air.
Large capacity, dual element.
CLEARANCE CIRCLE 2WD Inside = 32 in (81 cm); Outside = 194 in (493 cm)
Inside = 32 in (81 cm); Outside = 194 in (493 cm)
Inside = 32 in (81 cm); Outside = 194 in (493 cm)
CLEARANCE CIRCLE 4WD Inside = 100 in (254 cm); Outside = 300 in (726 cm)
Inside = 100 in (254 cm); Outside = 300 in (726 cm)
N/A
6.5 gallon (24.6 liter)
6.5 gallon (24.6 liter)
Mechanical pump
Diaphragm pump
In tank filter sock. 10 micron polyester
Combination fuel filter / water separator with a 30
micron filtration and 50 mesh suction screen in tank.
In-line 40 micron filter and 50 mesh
suction screen in tank.
Standard, button on dash on 07367TC &
Standard, button on dash on 07368TC &
07371TC. Optional on 07368 & 07371.
Optional
85 db(A)**
80 db(A)**
Model 07368: 1956 lbs (889 kg)
Model 07368TC: 2730 lbs (1240 kg)
Model 07371: 2015 lbs (916 kg)
Model 07371TC: 2789 lbs (1268 kg)
Model 07369: 1848 lbs (840 kg)
Model 07368: 1956 lbs (889 kg)
Model 07368TC: 2037 lbs (926 kg)
Model 07371: 2015 lbs (916 kg)
Model 07371TC: 2096 lbs (953 kg)
Model 07369: 1848 lbs (840 kg)
Model 07369: 3002 lbs (1364 kg)
Model 07370TC: 2759 lbs (1254 kg)
Model 07368: 2894 lbs (1315 kg)
Model 07368TC: 2813 lbs (1279 kg)
Model 07371: 2835 lbs (1289 kg)
Model 07371TC: 2754 lbs (1252 kg)
Model 07367: 2499 lbs (1136 kg)
Model 07367TC: 2418 lbs (1099 kg)
Model 07370: 2440 lbs (1109 kg)
Model 07370TC: 2359 lbs (1072 kg)
Model 07368: 2494 lbs (1134 kg)
Model 07368TC: 2413 lbs (1097 kg)
Model 07371: 2435 lbs (1107 kg)
Model 07371TC: 2354 lbs (1070 kg)
Model 07369: 2602 lbs (1183 kg)
FUEL CAPACITY 6.5 gallon (24.6 liter)
FUEL PUMP 12V internally regulated 42 psi in-tank
FUEL FILTER depth.
HORN 07370TC. Optional on 07366, 07367 & 07370.
SOUND LEVEL 75 db(A)**
VEHICLE SHIPPING
WEIGHT
Model 07366: 1623 lbs (738 kg)
Model 07367: 1951 lbs (887 kg)
Model 07367TC: 2725 lbs (1238 kg)
Model 07370: 2010 lbs (914 kg)
Model 07370TC: 2784 lbs (1265 kg)
Model 07366: 1623 lbs (738 kg)
07367: 1951 lbs (887 kg)
VEHICLE ACTUAL Model
Model 07367TC: 2032 lbs (924 kg)
WEIGHT W/O FUEL Model 07370: 2010 lbs (914 kg)
Model 07370TC: 2091 lbs (950 kg)
Model 07367: 2899 lbs (1318 kg)
Model 07367TC: 2818 lbs (1281 kg)
TOTAL CAPACITY Model 07370: 2840 lbs (1291 kg)
CARGO BED CAPACITY
*Specifications and design subject to change without notice.
**At operator's ear; 3600 rpm with bed and sides installed.
73
Workman HD Series Specifications* (continued)
®
SPECIFICATIONS COMMON TO WORKMAN HD SERIES VEHICLES
FRONT SUSPENSION
Independent system with dual “A” frame control arms, dual coil springs and dual shock absorbers with anti-sway bar. Provides 5 3/4”
travel.
DeDion rear axle (weight carrying axle) suspension independent of transaxle with dual leaf springs and dual shock absorbers.
REAR SUSPENSION Provides 3” travel.
BATTERY 12-volt, group 26, with 540 cold cranking amps at 0 degrees F (-18 degrees C).
Rear transaxle directly connected to engine, twin axle drive. 3-speed synchromesh (forward speeds only), h-shift pattern with
TRANSMISSION high-low range providing 6 forward speeds and 2 in reverse. Transmission housing doubles as hydraulic reservoir with outlet screen
and external filter.
3RD HIGH LOCKOUT Interlock key switch that prevents engine from running in 3rd gear, high range.
DIFFERENTIAL LOCK Manual engage rear differential lock.
Fully automatic on-demand, bi-directional system. Uses dual bi-directional clutches. In event of rear tire slippage, clutches transmit
4WD SYSTEM power proportionally to front wheel with highest traction.
FRAME Steel space frame front frame and C-channel rear frame.
Hydraulic power steering with with steering valve coupled to hydraulic cylinder with thru shaft. Maximum steering angle is 70
STEERING degrees on 2WD and 50 degrees on 4WD.
2-POST ROPS 2-post rollover protective structure and protective back panel bolted to ROPS.
4-wheel hydraulic disk brake system. 9 1/2” disk with hydraulic service brakes using twin piston fix mount calipers. Parking brake
BRAKES uses mechanical cable actuated caliper on rear wheels.
4 gpm (15 lpm) gear pump provides hydraulic flow for power steering and lift in series. Lift control valve with quick disconnects for
HYDRAULICS dual lift cylinders or for attachments when quick disconnects are switched. 8 quart total capacity.
LIGHTS Twin halogen headlights and dual taillights actuated by switch on dash. Dual brake lights actuated by brake pedal.
Lap seat belts standard. Bucket seats with adjustable slides to allow for various seat positions. Hip restraint tubes welded to seat
SEAT BELTS / SEATS mounting straps.
CONTROLS Throttle, brake and clutch pedals. Gear shifter, differential lock, parking brake, high-low range shifter and hydraulic lift levers.
To start engine, clutch pedal must be depressed and remote hydraulic lever must be in neutral position. If installed, high flow
INTERLOCK hydraulics and rear PTO must be disengaged / switched off.
SAFETY SUPPORT 7-gauge steel channel stores behind seat and fits over extended lift cylinder to prevent accidental lowering of bed.
GROUND CLEARANCE 7” (18 cm) with no load.
Steel hitch bracket bolted to rear DeDion axle. Mounting plate provides mounting hole for pin or ball hitch and incorporates two
REAR TOW HITCH safety chain mounting holes. Maximum tongue weight of 600 lbs (272 kg). Maximum trailer weight of 3500 lbs (1587 kg). Trailers
over 1500 lbs. require trailer brakes.
Forward Speeds:
GROUND SPEED
Reverse Speeds:
High Range
Low Range
High Range
Low Range
Standard Tires, Gear 1/2/3
7.6/11.5/19.8 mph (12.2/18.5/31.9 km/h)
2.9/4.5/7.7 mph (4.7/7.2/12.5 km/h)
7.1 mph (11.6 km/h)
2.8 mph (4.5 km/h)
Overall Length
DIMENSIONS
127.6 in (324 cm) w/o bed
130 in (330 cm) w/ full bed
Overall Width
64.7 in (164.3 cm)
Overall Height (Top of ROPS)
75.8 in (192.5 cm)
Certified to meet SAE J2258. Certified to meet ISO/DIS 21299 for ROPS. Engine meets all applicable emission standards per the
CERTIFICATIONS manufacturer. Certified to meet the CE Machinery Directive.
WARRANTY Two-year limited warranty. See Operator’s Manual for further details.
*Specifications and design subject to change without notice.
74
Workman HD Series Specifications* (continued)
®
WORKMAN VEHICLE ACCESSORIES
FULL AREA FLAT BED Welded steel diamond plate flat bed that mounts to vehicle frame. Dimensions: 54.7 x 64.5 in (139 x 164 cm). Weight: 218 lbs (99 kg).
FULL FLAT BED SIDE KIT Long bed side panels, front panel and tailgate with a fixed pivot.
Welded steel diamond plate flat bed. Has (4) corner stake pockets for enhancing specialty mount applications. Dimensions: 21.5 x 54.7 in (55 x 139
1/3 FLAT BED cm). Weight: 55 lbs (25 kg)
1/3 FLAT BED STAKE SIDE KIT Formed 14-gauge steel stake sides for use with 1/3 flat bed.
2/3 FLAT BED Welded steel diamond plate flat bed. Dimensions: 48.1 x 54.7 in (122 x 139 cm). Weight: 161 lbs (73 kg)
2/3 FLAT BED SIDE KIT Short bed side panels, front panel and tailgate with a fixed pivot for use with 2/3 flat bed. Optional tailgate release PN 92-1220.
FULL FLAT BED FOLD Hinged side panels, front panel and tailgate can be folded down independently for use with full flat bed. Dimensions: 64.5 x 54.7 x 11 in (164 x 139 x
DOWN SIDE KIT 28 cm) outside. 20 cu ft (.570 cu m) capacity. Weight = 109 lbs (49 kg)
HIGH FLOW HYDRAULICS KIT Provides 8 gpm (30.3 liter) at 2000 psi hydraulic flow in a separate circuit to power certain attachments and accessories (standard on TC models).
200 GALLON SPRAYER 200 gallon (757 liter) low profile tank sprayer with diaphragm pump and detatchable control box. Three-section, 18.5 ft (5.6 m) open boom system.
VICON SPREADER Pendulum action spreader with polyester hopper. 14.1 cu. ft. (.396 cu. m.), 750 lbs (340.5 kg) capacity. Spread width is 3 - 46 ft. (1 - 14 m).
18 cu. ft. (.504 cu. m), 1450 lbs (541 kg) capacity conveyor belt style topdresser hydraulically driven by remote hydraulics. 60 in (152 cm) spread
TOPDRESSER 1800 width. Workman bed lift cylinders raise topdresser. Spring load metering gate.
25 cu. ft. (.7 cu. m) capacity conveyor belt style topdresser towed by Workman vehicle. Textured belt, oscillating axles and all wheel drive.
TOPDRESSER 2500 Electrically activated hydraulic brakes.
Propass 200 Topdresser 21 cu. ft. / 0.54 cu. m) struck (25 cu. ft. / 0.71 cu. m heaped) capacity spin style topdresser. Tow-behind or bed mount versions.
TM
DirtCub dump trailer 3000 lbs. (1360 kg) capacity all-steel heavy-duty dump box towed by Workman vehicle.
TM
An elevating, scissor-lift work platform with 600 lb (272 kg) lift capacity that can be raised from 38 in (96.5 cm) to 98 in (249 cm).
1/3 VERTICAL LIFT Slope indicator for safe operation. Removable over-ride key for lift controls.
Deluxe hard cab, ROPS and CE certified. Vented front glass windshield, interior dome light and a 2-speed windshield wiper.
HARD CAB Optional heater and mirrors available.
CAB SLIDING WINDOW Door kit for deluxe hard cab. Operator door has a sliding window for ventilation and ability to access exterior elements such as an identification
DOOR KIT badge security entry. Passenger door has solid window.
CAB SOLID WINDOW DOOR KIT Door kit for deluxe hard cab. Operator and passenger doors have solid windows.
CAB REAR VIEW MIRROR KIT Externally mounted to the cab frame, operator and passenger side rear view mirrors for enhancing all around visibility.
CANOPY Durable, high-density polyethylene canopy with drainage outlets for moisture runoff.
FOLDING WINDSHIELD Clear high-impact modified acrylic material with fold down capability.
LIGHT KIT “RIGHT SIDE” Consists of turn signal lights for both corners in the front and rear of vehicle and brighter beam headlights. Headlights are directionally set for right hand driving and passing.
LIGHT KIT “LEFT SIDE” Consists of turn signal lights for both corners in the front and rear of vehicle and brighter beam headlights. Headlights are directionally set for left hand driving and passing.
WORK LIGHT KIT Consists of (2) front facing and (1) rear facing work lights all mounted on top of ROPS bar.
ROPS SIGNAL LIGHT KIT Consists of (2) double amber warning lights and (2) single red tail lights all for mounting on top of ROPS bar. Requires either a “Right Side” or “Left Side” light kit.
HEAVY DUTY POWER Hydraulically-powered lift hitch for rear mounted 2 point arm attachments, including those requiring mechanical down pressure or “float”. Lift
LIFT HOLSTER HITCH capacity: 500 lbs (249 kg). Requires heavy-duty hitch frame.
HEAVY DUTY HITCH FRAME Heavy duty hitch frame made of steel plate and tubular construction. Designed for use with heavy duty power lift hoster hitch.
Provides automatic tailgate release when dumping from cargo bed and resets automatically upon lowering of bed. Works on full or 2/3 bed with full
AUTOMATIC TAILGATE RELEASE sides. Does not work with folding side kit.
REAR PTO KIT Rear mounted, 540 RPM, PTO shaft mechanically driven by transaxle.
Mechanical throttle and speed limit control that provides constant RPM for stationary attachments or a controlled maximum speed for applications
HAND THROTTLE such as spraying or spreading.
SPARK ARRESTOR For Daihatsu engines. Fits onto end of tailpipe.
PLASTIC BED LINER A rugged, weatherproof one-piece plastic liner and separate tailgate liner that will protect either a full are bed with sides or a 2/3 bed with sides.
Kit for extending the air intake system from underneath the cargo bed to a position slightly above the ROPS shield behind the passenger position of
HIGH AIR INTAKE KIT the vehicle. Recommended for dusty work applications.
REAR VIEW MIRROR KIT A single 8 1/2” convex mirror with mounting capability on either the operator or passenger side of the vehicle.
75
*Specifications and design subject to change without notice. Products depicted in this literature are for
demonstration purposes only. Actual Products offered for sale may vary in use, design, requirements and safety
features. Consult your local Toro Distributor. “Cushman” is a registered trademark of Ransomes.
The Workman utility vehicle is manufactured
in Tomah, WI ISO 9002 Certified Plant.
Workman HD Series Specifications* (continued)
®
WORKMAN VEHICLE ACCESSORIES
5TH WHEEL HITCH KIT
A 5th wheel hitch assembly with a rubber-mounted 2” ball hitch and electric brake controller used to tow Cushman GA60 Aerator
and similar implements.
2” RECEIVER HITCH Provides a 2” square receiver to enable a “drawbar” hitch.
KIT
TRAILER BRAKE Kit provides a controller which plugs into Workman vehicle and a positive wire to assist the hook up of customer supplied electric
WIRING KIT trailer brakes.
TRAILER SIGNAL Kit provides electrical wire for Workman vehicle to enable easy hook up to customer supplied trailer signal and brake lights.
WIRING KIT
manifold kit that provides to ability to switch hydraulics between cargo bed actuation and remote port usage via use of a
REMOTE HYDRAULIC Hydraulic
opertor panel
MANIFOLD KIT mounted switch.
REMOTE HYDRAULIC Hydraulic float kit that enables both hydraulic lifting and “float” in the down position. Required when using a Deere TC125 sweeper.
FLOAT KIT
*Specifications and design subject to change without notice. Products depicted in this
literature are for demonstration purposes only. Actual Products offered for sale may vary
in use, design, requirements and safety features. Consult your local Toro Distributor.
“Cushman” is a registered trademark of Ransomes.
The Workman utility vehicle is manufactured
in Tomah, WI ISO 9002 Certified Plant.
WARNING
THE WORKMAN IS AN OFF-HIGHWAY
VEHICLE, AND IS NOT DESIGNED,
EQUIPPED, OR MANUFACTURED FOR
USE ON PUBLIC STREETS, ROADS OR
HIGHWAYS.
®
76
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising