Terex PT-100 Spec Sheet.indd

Terex PT-100 Spec Sheet.indd
PT-100 COMPACT TRACK LOADER
Brief Specifications
Operating Weight:
Tipping Load:
Ground Pressure:
Gross Engine Power:
10,150 lb (4604 kg)
7,600 lb (3447 kg)
3.5 psi (24 kPa)
99.9 hp (74.5 kW)
• A powerful loader built for productive work, even in poor ground
conditions. Undercarriage suspension provides exceptional traction
and operator comfort.
• Two-speed hydrostatic drive system offers fast travel speed and high
torque work speed.
• Easy operation with pilot-operated joystick controls and comfortable
operator station.
• Standard high-flow auxiliary hydraulics and high-capacity cooling system
are ideal for demanding applications like brush cutting, mulching and
many more.
Specifications
Operating Specifications (standard equipment)
Service Refill Capacities
Operating weight
10,150 lb (4604 kg)
Shipping weight
9,200 lb (4173 kg)
Ground pressure @ operating weight
26 US gal (98 L)
Hydraulic tank
20 US gal (76 L)
3.5 psi (24 kPa)
Engine coolant/antifreeze
3.125 US gal (12 L)
Tipping load
7,600 lb (3447 kg)
Engine oil, including filter
8.8 quarts (8.3 L)
Operating capacity, 50% tipping load
Operating capacity, 35% tipping load
3,800 lb (1724 kg)
2,660 lb (1207 kg)
Electrical System
Travel speed, low range
Travel speed, high range
0-6 mph (9.7 kph)
0-11.5 mph (18.5 kph)
Type
Diesel, 4-cylinder, turbocharged
Model
Perkins 1104C-44T
268 in3 (4.4 L)
Displacement
Gross power rating @ 2300 rpm
99.9 hp (74.5 kW)
Torque, peak
304 ft-lb (412 Nm)
Cooling system
Engine-driven fan and coolant/anti-freeze-filled radiator
Engine block heater
Dual stage
Emission controls
Meets all U.S. EPA Tier 2 standards
Undercarriage
Track type
- General purpose track constructed of rubber compound
with embedded copolymer cords and all-purpose treads.
- Two rows of track drive lugs molded in.
Track width, standard
72.5 in (1842 mm)
Ground contact area
2,610 in2 (1.68 m2)
Two hydrostatic direct drive sprockets controlled by a single joystick.
Track drive sprocket
Two independent torsion axles per undercarriage.
Roller wheels
21 high-density polyurethane and rubber wheels per track.
Front and rear wheel bearings protected by metal-faced seals.
Roller wheel diameters
Outlets
1-12 V port inside operator station
Wiring
Pre-wired for all factory-available accessories
Operator Station
Seat
Adjustable contour vinyl seat
with built-in operator presence switch,
lap bar and 2-inch (51 mm) wide seat belt.
Loader control
Right-hand pilot hydraulic
joystick controls loader lift/lower and tilt,
plus intermittent control of aux. hydraulic.
Drive control
Left-hand pilot hydraulic joystick
controls machine speed and direction.
Engine speed
Hand throttle lever and foot pedal.
Indicators/gauges
- Engine oil pressure light
- Hydraulic oil hot temperature light
-Battery voltage low light
- Coolant temperature gauge
- Tachometer
- Fuel gauge
- Hourmeter
ROPS
Meets SAE J1040 MAY94,
ISO 3471:1994
FOPS
Meets SAE J1043 SEPT87,
ISO 3449:1992
Illumination
Front & rear wheels - 14 in (356 mm);
Middle wheels - 10 in (254 mm)
4 - Fixed forward-facing halogen lights
1 - Adjustable rear-facing halogen light
1 - Interior light
Convenience
Auxiliary Hydraulic System
20 gpm (76 lpm)
38 gpm (144 lpm)
3,300 psi (22 737 kPa)
Controls
Intermittent via joystick button or continuous via console switch,
mode selectable via dash-mounted switch.
Couplers
Push-to-connect quick couplers mounted on loader arms.
Pressure relief valve mounted to coupler block.
Cooling system
85 amp alternator
Elevated with low friction, replaceable sprocket rollers.
Undercarriage suspension
System pressure, max.
950 CCA
18 in (457 mm)
Length of track on ground
Pump capacity, low flow
Pump capacity, high flow
12 V
Battery
Standard, AC plug-in type
Intake air cleaner
Drive system
Nominal charge
Charging system
Engine
2
Fuel tank
High efficiency oil cooler beside engine radiator, not stacked.
Operator station options
12 V power port
- Back-up alarm
- Beacon, rotating
- Bucket positioning, automatic
- Cold weather cab enclosure with heater and wiper
- All-weather cab enclosure with A/C, heater and wiper
- Front door, (glass or polycarbonate)
- Horn
- Sound insulation
- Window, rear
- Windows, side, sliding
COMPACT TRACK LOADER PT-100
Dimensions: General Purpose Bucket
81 in (2210 mm)
91 in (2311 mm)
125 in (3175 mm)
65o
40o
15 in
(381 mm)
o
18.5
73 in (1854 mm)
119 in (3010 mm)
148 in (3759 mm)
33 in
(838 mm)
18 in
(457 mm)
69 in (1753 mm)
Dimensions: Pallet Fork Attachment
8 in
(203 mm)
55 in (1397 mm)
118 in (2997 mm)
33 in
(838 mm)
16 in
(406 mm)
174 in (4420 mm)
3
Attachment Interface and Attachments
The PT-100 comes standard with a hydraulicallyoperated loader-mounted quick attach interface
that makes it quick and easy to mount a variety of
different attachments.
The following attachments are available from
Terex for the PT-100 so you are assured proper
fit, balance and operation.
Auger & bits
Land leveler
Backhoe
Pallet forks
Broom, rotary
Power box rake
Bucket, general purpose
Snow blade
Bucket, light material
Snow blower
Bucket, multi-purpose
Stump grinder
Brush cutter, rotary
Trencher
Dozer blade
Vibratory roller
Effective date: December, 2008. Product specifications and prices are subject to change without notice or obligation. The photographs and/or
drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this
equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale
and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex
Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in
the USA and many other countries. Copyright 2008 Terex Corporation.
Terex Corporation
840 Lily Lane, Grand Rapids, MN 55744
Tel +1 (800) 346-5954 Fax +1 (218) 327-2376
www.terex.com
PT-100 2.5K 1208A Part No. 2801006
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising