Bush | 19 | Instruction manual | 19” LED TV with DVD Player Instruction manual

19” LED TV with DVD Player Instruction manual
19” LED TV with DVD Player
Instruction manual
VL19HDLED-D
Main Image
You’ll soon be up and running
Looking forward to your new Alba television? Great.
Then let’s get you started.
Just follow this simple step-by-step guide and you’ll be good to go.
Help and Guidance
We’re here to help you get the most from your television. Should you require any guidance, a simple
solution can often be found online at:
www.argos-support.co.uk
If you still require further assistance, call one of our experts on 0345 604 0105.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Contents
1
Safety information
2
3
4
Recording DTV Programme onto a USB Storage
Device
32
Safety information
6
Getting to know your TV
Timer Programming
33
Play Recorded Programme
34
Sound management
35
Channel management (ATV / DTV Mode)
36
Ready? Let’s begin...
12
Accessories
12
Installing / Removing the Base Stand
13
Viewing remote control
14
Using the Bulit-in DVD Player
50
Viewing control panel
15
Basic DVD Playback Functions
51
Aerial connection
17
Playing Multimedia Discs
52
Remote control - Inserting batteries
17
DVD SYSTEM MENU
52
Switching the TV On and Off
17
Go To General Setup Page
52
Operation using TV control buttons
18
Go To Audio Setup Page
53
Operation using remote control
18
Go To Preference Setup Page
53
How to watch a DVD
19
Notes on DVD playback
19
DVD Controls
20
Initial setup
21
Specifications
58
General operation
21
Digital reception
58
Plug replacement - UK and Ireland only
59
Energy label
59
DTS TruSurround
59
5
6
Connections
Using the DVD Features
Other information
Left side connections explained
24
Left bottom connections explained
25
HDMI Connections
26
SCART Connections
26
Trouble shooting
62
VGA Connections
26
Definition of terms
63
Supported file formats
64
Help and assistance
65
Disposal
66
Guarantee
67
Basic Feature
How to navigate menus - Selecting source
30
7
Product support
Electronic programme guide (EPG) (DTV mode) 30
Teletext (ATV mode)
31
Digital Teletext (DTV mode)
32
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Safety information
1
Safety information
Important - Please read these instructions fully before
installing or operating
Power source
The TV should be operated only from a 220-240 V AC, 50
Hz outlet.
Ŕ
Warning: Do not leave your TV in standby or operating
mode when you leave your house.
Positioning the TV
For ventilation, please leave a clear space of at least 10cm
all around the TV.(Fig 1)
Ŕ)BOEMFUIFQPXFSDPSECZUIFQMVHEPOPUVOQMVHUIF57
by pulling the power cord.
Ŕ/FWFSUPVDIUIFQPXFSDPSEQMVHXJUIXFUIBOETBTUIJT
could cause a short circuit or electric shock.
Ŕ/FWFSNBLFBLOPUJOUIFQPXFSDPSEPSUJFJUXJUIPUIFS
cords.
Ŕ1PXFSDPSETTIPVMECFQMBDFEJOTVDIBXBZUIBUUIFZBSF
not likely to be stepped on or driven over.
Ŕ"EBNBHFEQPXFSDPSEQMVHDBODBVTFGJSFPSHJWFZPV
an electric shock. When damaged it must be replaced, this
should only be done by qualifi ed personnel.
Moisture and water
10cm
10cm
10cm
ŔDo not use this TV in a humid or damp place (avoid
bathrooms, the sink in the kitchen, and near the washing
machine).
ŔDo not expose this TV to rain or water, as this may be
dangerous.
ŔDo not QMBDFPCKFDUTGJMMFEXJUIMJRVJETTVDIBTGMPXFS
vases, on top of the TV. Avoid from dripping or splashing.
Ŕ*GBOZTPMJEPCKFDUPSMJRVJEGBMMTJOUPUIFDBCJOFUVOQMVH
the TV and have it checked by qualifi ed personnel before
operating it any further.
Fig 1.
Ventilation
Ŕ Do not block the ventilation openings.
Ŕ Do not place the TV on sloping or unstable surfaces, the
TV may tip over.
Ŕ5PQSFWFOUEBNBHFUPUIF57EPOPUQMBDFBOZPCKFDUTPO
top of the TV.
Ŕ0OMZVTFUIF57JONPEFSBUFDMJNBUFT
Ŕ5IFTMPUTBOEPQFOJOHTPOUIF57TFUBSFJOUFOEFEGPS
ventilation and to ensure reliable operation.
Ŕ5PQSFWFOUPWFSIFBUJOHUIFTFPQFOJOHTNVTUOPUCF
blocked or covered in anyway.
Heat sources and flames
Power cord and plug
Ŕ5IFQPXFSDPSEQMVHTIPVMECFFBTJMZBDDFTTJCMF*O
case of storms and lightning, when going on holiday,
or when the TV is not used for a long period of time
disconnect the power cord from the mains power
socket.
ŔDo not expose the TV to direct sunlight or other heat
sources.
Ŕ5IF57TIPVMEOPUCFQMBDFEOFBSUPPQFOGMBNFTBOE
sources of intense heat such as an electric heater.
Ŕ&OTVSFUIBUOPPQFOGMBNFTPVSDFTTVDIBTMJHIUFE
candles, are placed on top of the TV.
Ŕ%POPUQMBDFUIF57GVSOJUVSFFUDPOUIFQPXFSDPSEPS
pinch the cord.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
6
Safety information
Safety information
Important - Please read these instructions fully before
installing or operating
Ŕ To reduce the risk ofelectric shock, do not
remove cover (or back). No user-serviceable
parts inside. Refer servicing to qualified service
personnel.
Ŕ
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Ŕ
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of suffi cient magnitude
to constitute a risk of electric shock of persons.
Headphone volume
Excessive sound pressure from earphones and
headphones can cause hearing loss, please take care.
Batteries
Warning: Incorrect installation of batteries may cause
battery leakage and corrosion, resulting in damage to
the remote control.
Do not mix old and new batteries, or
batteries of different types.
Do not dispose of batteries in a fire.
Do not dispose of batteries with normal household
waste, take to a local recycling centre.
Replacement parts
When replacement parts are required, make sure that
the service technician has used replacement parts,which
are specified by the manufacture or have the same
specifications as the original one. Unathorised substitutions
may result in fire, electrical shock or other hazards.
Handling discs
Wall mounting (optional)
5PQSFWFOUJOKVSZUIJT57NVTUCFTFDVSFMZBUUBDIFEUP
the wall in accordance with the installation instructions (if
the option is available).
Ŕ5PLFFQUIFEJTDDMFBOPOMZIBOEMFUIFEJTDCZJUTFEHF
Do not touch the surface.
LCD Screen
Ŕ5IF-$%TDSFFOJTBWFSZIJHIUFDIOPMPHZQSPEVDUXJUI
about a million thin fi lm transistors, giving you fi ne picture
details. Occasionally, a few non-active pixels may appear on
the screen as a fi xed blue, green or red point. Please note
that this does not affect the performance of your product.
Ŕ5BLFDBSFOPUUPTDSBUDIUIFTDSFFOXJUIGJOHFSOBJMTPS
PUIFSIBSEPCKFDUT
ŔDo not stick paper or tape on the disc.
Ŕ*GUIFEJTDJTDPOUBNJOBUFEXJUIBOZTVCTUBODFMJLFHMVF
remove before using it.
ŔDo not expose the disc to direct sunlight or heat
sources such as hot air ducts, or leave it in a car parked
in direct sunlight as the temperature can rise quickly
and damage the disc.
Ŕ"GUFSQMBZJOHTUPSFUIFEJTDJOJUTDBTF
Cleaning
Cleaning discs
Ŕ#FGPSFDMFBOJOHVOQMVHUIF57GSPNUIFXBMMTPDLFU
ŔDo not use liquid or aerosol cleaners. Only use a soft, dry
cloth.
Ŕ#FGPSFQMBZJOHDMFBOUIFEJTDXJUIBDMFBOJOHDMPUI
Wipe the disc from the centre out.
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Safety information
7
Safety information
Important - Please read these instructions fully before
installing or operating
ŔDo not use solvents such as benzine, thinner,
commercially available cleaners or anti-static spray
intended for vinyl LPs.
Servicing
ŔWarning: Risk of exposure to radiation from class 1/class
3b visible and invisible laser beams. Do not open the TV
and stare directly into beam.
ŔWarning: Risk of electric shock, do not attempt to
repair, service or modify this TV yourself. Contact the
manufacturer, their approved service agent or the Customer
Helpline: 0345 604 0105.
This equipment is a Class II or double insulated
electrical appliance. It has been designed in such a
way that it does not require a safety connection to
electrical earth.
Ŕ8BSOJOH5PQSFWFOUUIFTQSFBEPGGJSFLFFQ
candles or other open flames away from this
product at all times.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
8
Safety information
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Safety information
9
Getting to know your TV
2
Getting to know your TV
You’ll be up and running in no time
Ready? Let’s begin...
Accessories
Please read these instructions carefully. They contain
important information which will help you get the best
from your TV and ensure safe and correct installation
and operation.
If you require any further assistance, our technical
experts are happy to help. For full details, refer to
the product support section at the end of these
instructions.
Stand Base
MINI YPBPR Cable
MINI AV Cable
Remote Control
Batteries: 2 x AAA
Instruction Book
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
12
Getting to know your TV
Getting to know your TV
You’ll be up and running in no time
Installing / Removing the Base Stand
WALL MOUNTING INSTALLATION GUIDELINES
Base Stand Assembly Instruction
1. Place the TV with the display side down on a flat surface.
Use a cloth to protect. Locate the bottom at the stand.
2. Push the TV stand into the stand column until it snaps
into place.
1. Place the LED LCD Television onto a solid surface. Please
place some soft material over the front of the screen to
protect it from any damage.
2. Remove the stand .
3. Remove the two screws that secure the stand column to
the TV screen.
4. Remove the stand column.
INSTALLATION NOTES
5. Use the four screws provided to fix the TV onto a wall
mounting bracket (not included) via the four VESA standard
holes on the back of the television.
This TV can be connected to an AC 100-240 Volts,50/60
Hz power supply. Never connect straight to a DC power
supply.
Locate the TV in a room where light does not strike the
screen directly. Total darkness or a reflection on the
screen can cause eyestrain. Soft and indirect lighting is
recommended for comfortable viewing.
Allow enough space between the TV and the wall to permit
ventilation.
Avoid excessively warm locations to prevent possible
damage to the cabinet or premature component failure.
75 x 75mm VESA mount
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Getting to know your TV
13
Getting to know your TV
You’ll be up and running in no time
Viewing remote control
Power: Switches the TV between on and
standbymode.
Mute: Mutes and restores
your TV sound.
0-9 Number Button: Press to select a
programme. (ATV /
DTV/DVD mode)
-/-- : Press this button before entering a
programme greater than 09.
: Return to the previous viewing channel.
(ATV/ DTV mode)
P.MODE : Select picture mode: Dynamic / Standard /
Mild / Personal.
S.MODE : Select sound mode: Standard / Music / Movie
/ Personal.
SLEEP : Set the TV sleep timer.
MTS : To change among Stereo,Dual I, Dual IIand Mixed.
FAV
INFO
INFO : Displays the status information.
FAV : Display the Favourite Channel list.
( ATV / DTV mode)
VOL+/- : Adjust the volume.
CH+/- : Select a channel.
CH.LIST : Display channel list. (ATV / DTV mode)
FREEZE : 1SFTTUIJTLFZUPDPOUSPMUIFBVUPUJNFPGUVSO
off.Press again to restore the picture.
INPUT : Select among the different input signal
sources: DTV / ATV / AV / SCART / YPbPr /
HDMI / PC / Media /DVD.
TV.MENU : Display the OSD (On Screen Display) menu.
(ATV / DTV mode).
ASPECT : Select from the following mode settings: Full/
Zoom1 / Zoom2 / 4:3.
STWX: Allows you to navigate the OSD menus and
adjust the system settings to your preference.
OK : Ŕ$POţSNUIFTFMFDUJPOJOUIF04%NFOVT
Ŕ%JTQMBZBMJTUPGDIBOOFMTTBWFEJOUIF57UVOFS
memory.
EXIT : Exit the OSD (On Screen Display) menu.
TV.MENU
SET-UP : Enter or exit DVD OSD setting menu.
D.MENU: Return to main menu of DVD.
TEXT : Turn on and off the Teletext function. (ATV/DTV mode)
DVD : Press to DVD Source.
A-B : Repeats a segment between A and B.
HOLD : Freezes a multi-page passage on screen in
teletext. (ATV / DTV mode)
: Ejects a disc.
INDEX : To select the page number of the index
from teletext. (ATV / DTV mode)
AUDIO : Press to switch the audio mode.
: Ŕ5PTUBSUUIFUJNFTIJGUQMBZCBDL%57NPEF
Ŕ5PTUBSUQMBZCBDLPSQBVTF64#%7%NPEF
SIZE : To enlarge the picture on the TV in teletext.
(ATV / DTV mode)
: 1SFTTPODFUPTUPQ64#%7%NPEF
DVD
D.MENU
A-B
SET-UP
TITLE
TITLE : Display disc menu
EPG : Display the EPG (Electronic Program Guide).(DTV mode)
SUBTITLE : Display the subtitle which is broadcast with
the program. (DTV mode)
SUBPAGE : Displays the subpage on the teletext
screen.(ATV / DTV mode)
: Record the current programme. (DTV mode)
REVEAL : Reveals hidden information such as the
answer to a quiz in teletext. (ATV / DTV mode).
: 5PSFWFSTFQMBZCBDLSBQJEMZ64#%7%NPEF
: 5PBEWBODFQMBZCBDLSBQJEMZ64#%7%NPEF
: 5PTLJQUPUIFCFHJOOJOHPGUIFQSFWJPVT
DIBQUFSUSBDLQIPUP64#%7%NPEF
: 5PTLJQUPUIFCFHJOOJOHPGUIFOFYUDIBQUFS
USBDLQIPUP64#%7%NPEF
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
14
Getting to know your TV
Getting to know your TV
You’ll be up and running in no time
Viewing control panel
1
2
3
4
5
6
7
8
9
10
1. 1SFTTUPFKFDUEJTD%7%NPEF
6. CH- Selects the next channel down
2. Press to start playback or pause.(DVD mode)
7. INPUT Accesses the Source menu
3. VOL+ Increase the volume
8. MENU Accesses the TV menus
4. VOL- Decrease the volume
9. POWER Turns the TV on and into standby
5. CH+
10. Standby LED/Remote Control Sensor
Selects the next channel up
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Getting to know your TV
15
Getting to know your TV
You’ll be up and running in no time
21
20
HDMI
USB
MINI AV
MINI YPbPr MINI YPbPr-R/L CI SLOT
IN
IN
Viewing control panel
19
PC
EARPHONE AUDIO
IN
OUT
VGA IN
SCART
COAX OUT
RF IN
18
17
11
12
13
14
15
16
11. )FBEQIPOFKBDL
15. COAXIAL Out
19. MINI YPbPr
12. "VEJPJOKBDL1$.POJUPS
connection
16. RF Input (ANT.)
20. MINI AV/YPbPr-R/L
17. HDMI Socket High Definition
lead connection
21. CI Slot
13. VGA Socket PC Monitor
connection
14. SCART Socket SCART lead
connection
18. USB Socket USB connection
(optional)
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
16
Getting to know your TV
Getting to know your TV
You’ll be up and running in no time
Aerial connection
Remote control - Inserting batteries
Connect a coaxial cable (not provided) to the ANT/CABLE
*/KBDLPOUIFCBDLPGZPVS57BOEUPUIFBOUFOOBPSDBCMF
57XBMMKBDL
Remove the battery cover on the back of the remote
control, gently push down and pull backwards at the same
time as shown .
Insert two AAA/R3 or equivalent type batteries. Ensure
the batteries are inserted the correct way and replace the
battery cover.
Note: When the remote control is not going to be used
for long periods of time, the batteries should be removed.
Otherwise the remote control may be damaged, caused by
battery leakage and corrosion.
$POOFDUUIFJODPNJOHDBCMFGSPNUIFDBCMFXBMMKBDLUP
UIFDBCMFJOKBDLPOUIFDBCMFPSTBUFMMJUFCPY$POOFDUB
DPBYJBMDBCMFOPUQSPWJEFE
UPUIF"/5$"#-&*/KBDLPO
UIFTJEFPGZPVS57BOEUPUIFDPBYJBMPVUKBDLPOUIFDBCMF
or satellite box.
AAA/R3 X 2
Batteries
Cable or
satellite box
Cable
XBMMKBDL
Power connection
Connect the power cord plug to the mains power
socket.
Please note: After unpacking, allow the TV
to reach ambient room temperature before
connecting the TV to the mains power socket.
Switching the TV On and Off
Switching the TV On
With power cord plug connected to the mains power
socket and TV in ‘Standby’ mode.
To switch the TV on from standby mode, either:
a: The Remote control; Press the “ ” button.
b: The TV; Press the “ ” button on the right of the TV.
Switching the TV Off
Either press the “ ” button on the remote control or press
the “ ” button on the right of the TV, the TV will then
switch to standby mode.
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Getting to know your TV
17
Getting to know your TV
You’ll be up and running in no time
Operation using TV control buttons
Operation using remote control
The VOL+/VOL- buttons will function as volume up/down
as default. Even if you set other functions for these buttons,
the VOL+/VOL- buttons will return to volume control after
a short while.
The remote control is designed to control all the
functions of the model you selected.
Volume Setting
Press VOL+/VOL- buttons to increase or decrease volume.
Programme Selection
Press CH+/CH- buttons to select the next or previous
programme.
Volume Setting
Press VOL+ button to increase the volume.
Press VOL- button to decrease the volume. A volume level
scale (slider) will be displayed on the screen.
Programme Selection (Previous or Next Programme)
Press CH- button to selectthe previous programme.
Press CH+ button to select the next programme.
Programme Selection (Direct Access)
Press number buttons on the remote control to select
programmes between 0 and 9. The TV will switch to the
selected programme.
FAV
INFO
TV.MENU
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
18
Getting to know your TV
Getting to know your TV
You’ll be up and running in no time
How to watch a DVD
Notes on DVD playback
1.Press the “ ” button on the TV or remote control.
Ŕ No sound will be heard during Rapid advance or Rapid
reverse.
Ŕ No sound will be heard during Slow motion play.
Ŕ Reverse Slow motion play is not available.
Ŕ In some cases, the subtitle language will not be changed
immediately to the selected one.
Ŕ When the preferred language will not select, even after
pressing the button several times, it means the language is
not available on the disc.
Ŕ When the DVD player is restarted or the disc is changed,
the subtitle selection is automatically changed back to the
initial settings.
Ŕ If a language is selected that is not supported by the disc,
the subtitle language will automatically be set to the disc’s
priority (default) language.
Ŕ Usually a ‘circulation’ will happen while switching to
another language, this means you can cancel the subtitle
by pressing the same button a number of times until “Subtitle
Off” appears on the screen.
Ŕ When the power is turned on or the disc is removed,
the language heard will be the one selected at the initial
settings.
Ŕ Some DVDs may not contain root and/or title menus.
Ŕ Reverse stepping is not available.
Ŕ For reference: If you attempt to enter a number greater
than the total time of the current title, the time search box
disappears and "Input Invalid " message appears on topleft corner of screen.
Ŕ The slide show is disabled when the ZOOM mode is on.
2.Switch to DVD source using the “INPUT” button on the
remote control.
3.Insert a disc into the loader.
The no label side of the disc MUST be facing you when
looking at the TV screen.
Label side
Label side
If play does not start automatically, press the "fII "button on
the remote control, or the "fII " button at the righ t of the
TV.
A menu may appear on the TV screen after a few
moments or the film may start immediately after the Film/
TV Company introduction. This will depend on the disc
content and may differ on each disc.
Steps 4 and 5 are only available when a menu is
recorded on the disc.
4. Press the navigation buttons "STWX" or the number
buttons to select the required title.
5. Press the OK button. The selected item starts to play.
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
19
Getting to know your TV
You’ll be up and running in no time
DVD Controls
You can operate DVD, movie CD, music or picture CD’s content by using the correct buttons on your remote control.
Below are main functions of commonly used remote control buttons.
Buttons on
Remote Control
/AUDIO
/SIZE
/INDEX
SET-UP
TITLE/TEXT
SUBTITLE
D.MENU
A-B/ HOLD
DVD Playback
Movie Playback
Picture Playback
Music Playback
Play/Pause
Play/Pause
Play/Pause
Play/Pause
Stop
Open or close the dics
tray
Displays the DVD OSD
menu
Skip backward
Stop
Open or close the dics
tray
Displays the DVD OSD
menu
Skip backward
Return to the picture list
Stop
Rapid reverse
Display disc menu (if
available)
Rapid reverse
Display disc menu (if
available)
X
Rapid reverse
X
X
repeatedly to switch
between subtitle option
Skip forward
repeatedly to switch
between subtitle option
Skip forward
X
X
Skip forward
Skip forward
Rapid advance
Return to the main
menu
of a loaded DVD (if
available)
Reprat a selected section
Rapid advance
X
Rapid advance
Return to the main menu
of a loaded DVD (if
available)
Return to the main menu
of a loaded DVD (if
available)
Return to the main menu
of a loaded DVD (if
available)
Reprat a selected section
X
Reprat a selected section
Open or close the dics tray Open or close the dics tray
Displays the DVD OSD
menu
Skip backward
Displays the DVD OSD menu
Skip backward
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
20
Getting to know your TV
You’ll be up and running in no time
Initial setup
1. Connect one end of the RF coaxial cable to the aerial
socket on the wall and the other end of the cable to the RF
(75:) socket at the bottom of your TV.
2. Connect the mains cable to the mains socket after you
have completed all the connections.
3. With power cord plug connected to the mains power
socket and TV in 'Standby' mode.At this stage, the TV
switches to standby mode. The red LED indicator will
illuminate on the front panel of the TV.
4. In standby mode, press the “ ” button on the right of the
TV or the “ ” button on the remote control to turn the TV
on. The red LED indicator will turn blue.
5. The first time you turn the TV on, it will go straight
into First Time Setup menu. Press the cdefbuttons to
navigate the menu and change the settings.
First Time Setup
OSD Language
Mode Setting
Country
Tuner Type
Auto Scan
LCN
Auto Channel Update
English
Home Mode
UK
Cable
DTV+ATV
Off
Off
Adjust
MENU: Return
Start
Press the OK button to start auto tuning. Auto Scan will
commence. The display will show the progress of the
tuning and the number of channels found.
Auto Scan
Scanning
CH34
Digital Channels Found:
DTV :10 Radio :0 Data:0
Analog Channels Found: 0
MENU: Skip
EXIT: Exit
6. If you want to skip the DTV tuning, press the TV.MENU
button to interrupt the tuning half way. You will then go
straight to ATV tuning. You may repeat the above step if you
also want to skip the ATV tuning.
General operation
Start
Move
Auto Channel Update
Select Auto Channel Update Type On or Off.
EXIT: Exit
OSD Language
Selects your desired language to be displayed on the menu.
The default on-screen menu language is set as English.
Mode Setting
Selects your desired mode setting.
Ŕ)PNF.PEF7JFXJOHBUIPNF
Ŕ4UPSF.PEF'PSTUPSFEFNPUIFCSJHIUOFTTJTIJHIFSUIBO
home mode.
Country
Selects the country where you will operate the TV. The
default country is set as UK.
Press the INPUT button on the remote control and select
DTV to switch the TV to Digital Terrestrial Television
Broadcasting.
Information Banner
Whenever you change channel using the CH+/CH- buttons
or the number buttons, the TV displays the broadcast
picture along with an information banner on the top left of
the screen (available only in DTV/ATV mode).
The information banner can be displayed a any time while
watching TV by pressing the INFO button on the remote
control.
Tuner Type
Select Tuner Type: Cable / Antenna.
Auto Scan
Selects the auto scan type: DTV+ATV / DTV /ATV.
LCN
Select LCN Type On or Off.
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
21
Connections
3
Connections
Bringing it all together
USB
HDMI
1. HDMI Input
Connects a device that has an HDMI socket.The TV can
display High Definition pictures from devices such as a High
Definition Satellite Receiver or DVD Player. These devices
must be connected via the HDMI sockets or Component
Socket. No sound connection is needed for an HDMI to
HDMI connection.
MINI AV
MINI YPbPr MINI YPbPr-R/L CI SLOT
IN
IN
Left side connections explained
PC
EARPHONE AUDIO
IN
OUT
VGA IN
SCART
COAX OUT
RF IN
2. USB Input
To connect devices to the TV, providing fast data exchange.
USB will have function in USB/DTV mode.
3.MINI YPbPr
:1C1S*OQVUTPDLFUJTKVTUTVJUBCMFGPS:1C1S.JOJ$BCMF
Connect to a DVD player, Digital Set-Top-Box, or other AV
devices with component (YPbPr)video output sockets.
Note: Pls. use "MINI AV/YPbPr-R/L" socket, when you want
to connect to YPbPr audio.
5. CI Slot
Used to insert a CI card. A CI card allows you
to view all the channels that you subscribe to.
For more information, see “Conditional Access”
section.
MINI AV
MINI YPbPr-R/L
4MINI AV/YPbPr-R/L
Connect to the composite VIDEO and AUDIO (R/L) output
sockets on external video devices..
4
MINI
YPBPR
5
3
HDMI
2
1
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
24
Connections
Connections
Bringing it all together
USB
HDMI
6. Headphone jack
To connect an external headphone to the TV. Connect to
UIF)&"%1)0/&KBDLUPMJTUFOUPUIF57GSPNIFBEQIPOFT
Note: Headphone volume can be changed using “VOL+” or
“VOL-” buttons.
MINI AV
MINI YPbPr MINI YPbPr-R/L CI SLOT
IN
IN
Left bottom connections explained
PC
EARPHONE AUDIO
IN
OUT
VGA IN
SCART
COAX OUT
RF IN
7. PC Input (VGA) / PC AUDIO
Connects a personal computer to the TV. Connect the PC
cable between the PC INPUT on the TV and the PC output
on the PC.
Note: If you connect a device to the TV via the PC cable,
you should also use an audio cable to connect your device
to the PC AUDIO INPUT to enable audio.
10
8. SCART socket
Inputs or outputs for external devices. Connect the SCART
cable between the SCART socket on the TV and the SCART
socket on the external device (decoder, VCR or DVD player).
9
Note: If an external device is connected via the SCART
socket, the TV will automatically switch to SCART mode.
8
9. COAXIAL
To connect to the audio socket on the digital/ standard 5.1
audio system.
10.RF Input (ANT.)
Connects to aerial (antenna) or cable TV. If you use a
decoder or a media recorder, you should connect the aerial
cable through the device to the TV with an appropriate
aerial cable.
7
6
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Connections
25
Connections
Bringing it all together
HDMI Connections
VGA Connections
)%.*MFUTZPVFOKPZIJHIEFGJOJUJPOEJHJUBMJNBHFTBOEIJHI
quality sound by connecting the TV to external devices
such as DVD players, set top boxes or gaming equipment.
Power off both the TV and the device before making any
connections.
For more information, refer to your device’s own instruction
book.
When connecting, switch “INPUT” to “HDMI” .See, “Input
Selection” section.
Note: HDMI cable is not supplied.
You can connect a computer (PC) to the TV to display your
computer’s screen image on the TV.
Power off both computer and TV before making any
connections.
Use a 15-pin D-sub display cable to connect a PC to the
TV. Use an audio cable between PC AUDIO inputs on the
left side of the TV and audio output on your PC to enable
sound connection.
When the connection is made, switch “INPUT” to “PC”. See
“Input selection” section.
Set the resolution that suits your viewing requirements.
Resolution information can be found in the “Appendix parts”.
Note: The VGA cable is not supplied.
SCART Connections
Most devices support SCART connection. You can connect
a DVD recorder, VCR or decoder to the TV using the SCART
socket.
Power off both the TV and the device before making any
connections.
For more information, refer to your device’s own instruction
book.
Note: The Scart cable is not supplied.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
26
Connections
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Connections
27
Basic Feature
4
Basic Feature
Simple everyday use
How to navigate menus - Selecting
source
2. Press EPG button or EXIT button again to switch off EPG
and return to normal TV viewing.
1. Press the INPUT button on the top o f the TV or the
INPUT button on the remote control to display the Input
source list.
Info bar commands:
RED (Prev. Date)
Press the RED button to view the schedule of the previous
day.
2. Press the cdbuttons to select the input source that you
want: DTV / ATV / AV / SCART / YPbPr / HDMI / PC / MEDIA
/ DVD.
3. Press OK button to confirm your selection.
GREEN (Next Date)
Press the GREEN button to view the schedule of the next
day.
YELLOW (Schedule)
Press the YELLOW button to view the preset reminders in
the schedule list. Press the YELLOW button to return to the
EPG.
SOURCE
DTV
ATV
AV
SCART
YPbPr
HDMI1
HDMI2
HDMI3
PC
MEDIA
DVD
Electronic programme guide (EPG) (DTV
mode)
This system has an Electronic Programme Guide (EPG) to
help you navigate through all the possible viewing options.
The EPG supplies information such as programme listings,
start and end times for all available services. In addition,
detailed information about the programme is often available
in the EPG (the availability and amount of programme
information will vary, depending on the particular
broadcaster).
This function can be used only when the EPG information
is broadcast by broadcasting companies.
BLUE (Reminder)
Press the BLUE button while on the selected programme,
the Reminder setting menu will be displayed.
Press thecdefCVUUPOTUPBEKVTUUIFTFUUJOHTBOE
then press the Save button to confirm the settings. After
confirmation, the EPG Schedule List will then be displayed
with your preset reminders shown. Press the YELLOW
button to return to the EPG. The TV will automatically tune
to the selected programme when it starts.
REC
Timer Programming.
OK
Press to display detailed information of the selected
programme (if available).
The EPG displays the programme details for the next 7 days.
1. Press the EPG button to switch on EPG.
26 Dec 2008 10:21:43
PROGRAM GUIDE
26 Dec 2008 10:00 - 26 Dec 2008 10:25 Big Cook Little Cook
[Children’s]
Penguin: Cookey series with Big Cook Ben and foot-high Little Cook Small. Ben comes in to the cate
wearing flippers and a mask he’s found in the fancy dress box. [AD,S]
009 BBC FOUR
10:00 Big Cook Little Cook
071 CBeebies
10:25 Bob the Builder
081 BBC Parliament
10:40 Me Too!
087 Community
11:00 Something Special
301 301
11:15 Doodle Do
302 302
PrevDate
Move
11:35 Our Planet
NextDate
Schedule
Reminder
Rec: Record
OK: Display
EXIT: Exit
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
30
Basic Feature
Basic Feature
Simple everyday use
Teletext (ATV mode)
Teletext is a free service broadcast by some TV stations
which gives up-to-the-minute information on news,
weather, television programmes, share prices and many
other topics. Using the Teletext control buttons you can
view pages of information that are listed in the teletext
INDEX.
Page HOLD
If the page of text you have selected contains subpages,
these subpages will automatically be displayed in order with
a delay to allow you to have enough time to read the page.
To stop the movie to the next sub page, press the HOLD
button.
To continue moving through the sub pages, press the
HOLD button again.
Alternative: Press the SUBPAGE button, and then use the
0-9 buttons to enter a 4-digit page number.
To Turn on Teletext Function
Make sure the TV channel you are watching
transmits teletext.
“No Teletext” sign will show on the screen if teletext
is not available.
In ATV mode, press the TEXT button to enter Teletext
mode. Press the INDEX button to display the INDEX page.
Press the TEXT button once to exit and the TV will return to
the channel you were watching.
To select a page of text
Find the number of the page in the INDEX and enter it using
the 0-9 buttons. The number of the page will appear on the
top left corner of the screen.
The page counter will search for your page. When it finds
it, the page will be displayed. To move to the next page of
text, press thec button.
To move to the previous page, press the d button.
To return to the INDEX page, enter the “100” by using the
0-9 buttons or press the INDEX button.
To Reveal Information
Press the REVEAL button to reveal concealed information
(quiz answers etc.).
Press the REVEAL button again to conceal the information
again.
Fasttext
"UUIFCPUUPNPGUIFUFMFUFYUTDSFFOJTBSPXPGTVCKFDU
headings in red, green, yellow and blue.
The remote control has a row of colour buttons
DPSSFTQPOEJOHUPUIFSPXPGDPMPVSFETVCKFDUTPOUIF
screen.
Pressing one of the colour buttons will take you directly to
UIFQBHFDPSSFTQPOEJOHUPUIFTVCKFDUIFBEJOH
Mix
To view a page of text while watching a TV programme,
press the TEXT button twice.
The text will be superimposed over the TV programme.
Double height text If you have difficulty reading the text on
the TV you can double the height of the text.
Press the SIZE button. The top half of the page will be
displayed in double height text.
Press the SIZE button again. The bottom half of the page
will be displayed in double height text.
Press the SIZE button again to return to the full page.
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Basic Feature
31
Basic Feature
Simple everyday use
Digital Teletext (DTV mode)
Recording
Digital teletext can access special digital teletext services
and specific services which broadcast digital teletext. You
will need to turn off Subtitle Function before using teletext.
1. In DTV mode, press the TEXT button to display the
teletext page.
Recorded Time : 00 : 00 : 47
Available Time: 3837 Minute
16 QVC
A Traditional Christ
2. Press the Stop button to stop recording.
adapter is connected to the mains supply.
2. Press the 0-9 buttons to select a page number.
3. Follow the instructions on digital teletext and move onto
the next step by pressing0,ef3&%(3&&/:&--08
BLUE or 0-9 buttons etc.
4. To change digital teletext service, select a different
service by pressing the 0-9 buttons or the cdbuttons.
Alternative: You may press the RED button to the TEXT
button to display the teletext information when you see
a Ɣ red logo displayed on the screen (e.g. BBC).
5. Press the TEXT button to exit
Recording DTV Programme onto a USB
Storage Device
adapter is connected to the mains supply as the
total current consumption may exceed 500mA.
hard disk is 1 TB.
programme, the transfer rate of the USB storage
device must not be less than 5MB/s, otherwise
the picture and sound of the programme will be
affected and a warning statement will be shown
on the screen. If this happens, please upgrade
your USB storage device.
take time to start up and stabilise the connected
hard disk. This is normal and the starting time
may vary depending on the brand and the
memory size of the connected hard disk.
use.
Use this function to record the DTV programme you are
watching on the main screen and save it for future viewing.
The recording from timer programme or direct recording
may have a little bit of delay when it starts to record the
broadcast programme.
Please make sure the USB device is inserted. If not, a
warning message will pop up.
1. Press the Ɣ REC button to record the programme that
you are currently watching.
To display the recording information, press
the REC button.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
32
Basic Feature
Basic Feature
Simple everyday use
Timer Programming
Start time (for Mode Once, Daily, Weekly)
Press thecdefCVUUPOTUPBEKVTUUIFTUBSUUJNF
This function is used for scheduled recording. The
recording from timer programme or direct recording
may have a little bit of delay when it starts to record the
broadcast programme.
Please make sure the USB device is inserted. If not, a
warning message will pop up.
End time (for Mode Once, Daily, Weekly)
Press the cdefCVUUPOTUPBEKVTUUIFFOEUJNF
1. Press the EPG button on the remote control.The EPG
menu will appear.
4. The Scheduled Record Setting List will then be displayed
with your preset reminders shown.
26 Dec 2008 10:21:43
PROGRAM GUIDE
3."GUFSGJOJTIJOHBMMUIFSFDPSEFSBEKVTUNFOUTQSFTTUIF4BWF
button to confirm your settings.
Scheduled Record Setting List
Scheduled Record
26 Dec 2008 10:00 - 26 Dec 2008 10:25 Big Cook Little Cook
009 BBC FOUR
10:00 Big Cook Little Cook
071 CBeebies
10:25 Bob the Builder
081 BBC Parliament
10:40 Me Too!
087 Community
11:00 Something Special
301 301
11:15 Doodle Do
302 302
11:35 Our Planet
PrevDate
NextDate
Schedule
Function
Delete One
Delete All
Move Up
Move Down
OK
Select
MENU
Return
Reminder
OK: Display
EXIT: Exit
EXIT
2. Press the Ɣ (REC) button on the remote control while
on the selected programme, the Scheduled Record menu
will be displayed. Press the cdefbuttons to select the
settings in the RECORD menu for the Frequency, Channel,
Start time, and End time.
10:03
Group Frequency
Hot Key
Rec: Record
Move
25 Dec 2008 Thu.
Standby
[Children’s]
Penguin: Cookey series with Big Cook Ben and foot-high Little Cook Small. Ben comes in to the cate
wearing flippers and a mask he’s found in the fancy dress box. [AD,S]
Exit
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Channel
Date
Start Time
Duration
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
5. Press the EXIT button to exit EPG.
Scheduled Record - Group 1
recording automatically.
Setting Status
Setting Is Not In Use
Frequency
standby mode, the LED indicator will alternatively
flash red and blue.
Off
Hot Key
Move Up
Channel
1 BBC ONE
Move Down
Start Time
2008-12-25
Adjust
1 0 : 0 5
Adjust
OK
Select
MENU
Return
EXIT
Exit
End Time
2008-12-25
1 0 : 1 5
Save
Frequency
Press the ef buttons to select the frequency (Off/Once /
Daily / Weekly).
Channel
Press the OK button and then press the cdbuttons to
select the channel that you want to record.
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Basic Feature
33
Basic Feature
Simple everyday use
Play Recorded Programme
FileName
VideoCodec :
Resolution
Bitrate :
Animals.AVI
MPEG4
640 x 480
4158120 bps
AudioCodec :
MP3
SampleRate :
44100 Hz
Channel :
2
You can play a recorded programme from the recorded
programme list or from a USB Storage Device.
1. Press the INPUT button on the top of the TV or the
INPUT button on the remote control then press the
cdbuttons to select the Media mode and then press the
OK button.
2. Press the efbuttons to select MOVIE and then press the
OK button.
00 : 00 : 22
00 : 05 : 13
6. Press the OK button or the INFO button to display the
function bar. Press the efbuttons and then press the OK
button to select the function: Pause / Prev. / Next / FB / FF /
Stop / Quick Menu (Repeat / Encode Type).
7. Press the EXIT button to return to the previous menu.
Photo
Music
Movie
Text
3. Press the cd buttons to select your storage device and
then press the OK button.
Picture management (ATV / DTV Mode)
1. Press the TV.MENU button to display the main menu.
Press thecd buttons to select Picture in the main menu,
then press the dor OK button, it will highlight the first
option.
Movie
2. Press the ef buttons to select the option you want to
BEKVTUJO1JDUVSFNFOV
USB1
USB1
3. Press the cdef buttons to change the following
settings.
Move
Change Page
OK Selete
EPG Quick Menu
EXIT Return
4. Press the cd buttons to select the “ usbrecord ” folder
and then press the OK button.
Movie
TIPS:
Ŕ:PVDBODIBOHFUIFWBMVFPGCSJHIUOFTTDPOUSBTU
sharpness and saturation when the picture is in Personal
mode.
Ŕ:PVDBOQSFTTP.MODE button on the remote control to
change the Picture Mode directly.
USB1/Movie
1/1
AITEMP
MY PVR
Movie
Music
Photo
Text
Picture
LE32G
Move
Change Page
OK Selete
EPG Quick Menu
EXIT Return
5. Press the cd buttons to select your recorded
programme and then press the fII button to view.
Picture Mode
Brightness
Contrast
Sharpness
Saturation
Hue
Colour Temp
Aspect Ratio
Move
Adjust
Standard
50
50
50
50
0
Standard
Full
MENU: Return
EXIT: Exit
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
34
Basic Feature
Basic Feature
Simple everyday use
Picture Mode
Allows the selection of a picture-enhancement technical
from among the following options: Dynamic / Standard /
Mild / Personal.
Brightness
5IJTJUFNDBOBEKVTUUIFPQUJDBMGJCFSPVUQVUPGUIFFOUJSF
picture; it will affect the dark region of the picture.
Contrast
5IJTJUFNDBOBEKVTUUIFIJHIMJHIUJOUFOTJUZPGUIFQJDUVSF
but the shadow of the picture is invariable.
Sharpness
5IJTJUFNDBOBEKVTUUIFQFBLJOHJOUIFEFUBJMPGUIFQJDUVSF
Saturation
5IJTJUFNDBOBEKVTUUIFTBUVSBUJPOPGUIFDPMPVSCBTFEPO
your own like.
Sound management
1. Press the TV.MENU button to display the main menu.
Press theef buttons to select Sound in the main menu,
then press thed or OK button, it will highlight the first
option.
2. Press the cd buttons to select the option you want to
BEKVTUJO4PVOENFOV
3. Press the cdefbuttons to change the following
settings.
TIPS:
Ŕ:PVDBODIBOHFUIFWBMVFPGUSFCMFBOECBTTXIFOUIF
sound is in Personal mode.
Ŕ:PVDBOQSFTTUIFS.MODE button on the remote control
to change the Sound Mode directly.
Hue
This item may use in compensating colour changed with
the transmission in the NTSC code.
Colour Temp
This item can increase or reduce warm colour of the picture
personally (red), and the cold colour (blue) according to
your like. The choice of Cold, that means it will increase
the blue tone for the white. But choosing the Warm, it will
increase the red colour for the white.
Aspect Ratio
Allows you to watch the screen in various picture formats:
Auto / 4:3 / Full / Zoom1 / Zoom2.
Screen Mode
Select the HDMI signal screen mode:Auto /Vedio / PC.
Advanced Settings
Ŕ/3/PJTF3FEVDUJPO
3FEVDFTUIFOPJTFMFWFMPGUIF
connected device (Medium / Strong / Off / Weak).
Ŕ%ZOBNJD$POUSBTU"EKVTUTUIFEZOBNJDDPOUSBTU.FEJVN
/ Strong / Off / Weak).
4. Press the EXIT button to exit menu.
Sound
Sound Mode
Treble
Bass
Balance
Surround Sound
EQ Setting
AVL
SRS Setting
Move
Adjust
Standard
0
0
0
Off
Off
Off
MENU: Return
EXIT: Exit
Sound Mode:
Allows the selection of an audio-enhancement technical
from among the following options: Standard, Music, Movie
and Personal. You can change the value of Treble and Bass
when the sound is in Personal mode.
Treble
Controls the relative intensity of higher-pitched sounds.
Bass
Controls the relative intensity of lower-pitched sounds.
Balance
"EKVTUTUIFSFMBUJWFWPMVNFPGUIFTQFBLFSTJOBNVMUJQMF
speaker system.
Surround Sound
This creates a feeling fitted to your TV when switched on
and SRS Setting is off.
EQ Setting
Allows the selection of an equalizer mode: Off / Rock /
Pop / Jazz / User. You can change the EQ value under User
mode.
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Basic Feature
35
Basic Feature
Simple everyday use
AVL
Selects to turn On/Off Audio Volume Leveler.
Channel management (ATV / DTV Mode)
SRS Setting
Selects to turn On/Off SRS default setting.
SPDIF
Select the digital audio output mode: Auto / Off / PCM.
Tuner Type
1. Press the TV.MENU button to display the main menu.
Press the efbuttons to select Channel in the main menu,
then press thedor the OK button, it will highlight the first
option.
Audio Description
Selects to turn On/Off Audio Description
2. Press the cdbuttons to select Tuner Type and then
press the ef buttons to select Cable or Antenna.
Sound Type
Channel
Tuner Type
Auto Scan
Manual Scan
Auto Channel Update
Channel Edit
Favorite Manager
Common Interface
Signal Information
When a programme is selected, press the MTS button to
select Stereo,Dual I, Dual II and Mixed.
Language selection for dual language broadcast
If a programme can be received in two languages (dual
language), you can swith to DUAL I, DUAL II or Mixed by
pressing the MTS button repeatedly.
DAUL I
Sends the primary broadcast language to
the loudspeaker s
DAUL II
Sends the secondary broadcast language
to the loudspeakers
Mixed
Sends the primary and secondary
broadcast languages to the loudspeakers
PLEASE NOTE
Sound Mode and EQ settings.
"EKVTUJOHBOZQJDUVSFPSTPVOETFUUJOHTXJMM
automatically change the mode toPersonal.
If you wish to reset all picture and sound
BEKVTUNFOUT.&/64FUVQ3FTFU
Move
Cable
Off
Adjust
MENU: Return
EXIT: Exit
3. Press the EXIT button to exit the menu.
Auto Scan
Use this to automatically find and store all available
channels. This is normally recommended if some channels
have been added or removed by the broadcaster or you
have moved house.
1. Press the TV.MENU button to display the main menu.
Press the ef buttons to select Channel in the main menu,
then press thedor OK button, it will highlight the first
option.
Channel
Tuner Type
Auto Scan
Manual Scan
Auto Channel Update
Channel Edit
Favorite Manager
Common Interface
Signal Information
Move
Adjust
Cable
Off
OK: Select MENU: Return
EXIT: Exit
2. Press the cd buttons to select Auto Scan and then press
the OK button to enter submenu.
Auto Scan
Country
Mode
Start
UK
DTV+ATV
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
36
Basic Feature
Basic Feature
Simple everyday use
3. Press thecdefbuttons to navigate the menu and
change the settings.
Country
Selects the country where you will operate the TV.
Mode
Selects the auto scan mode: DTV+ATV/DTV/ ATV. (DTV
mode)
Start
Press the OK button to start auto tuning.
Auto Scan
Scanning
2. Press the cd buttons to select Manual Scan and then
press the OK button. On the submenu, select Digital
Manual Scan and then press the OK button.
Tuner type is Antenna
Tuner type is Cable
Digital Manual Scan
Digital Scan
Start
Frequency
Strength
Move
Digital Manual Scan
CH21
Network ID
Frequency
Symbol Rate
Modulation
Start
Strength
474.00 MHz
0
Adjust
0~9 Input
MENU: Return
EXIT: Exit
Move
Adjust
Auto
474000 KHz
Auto
Auto
0
MENU: Return
EXIT: Exit
Tuner type is Antenna.
Digital Scan
Press the ef buttons to select the desired channel.
CH34
Digital Channels Found:
DTV :10 Radio :0 Data:0
Analog Channels Found: 0
MENU: Skip
EXIT: Exit
If you st op the tuning before it has
the TV w ill report a no s ignal
error. This is n ormal because all previous
channel memory has been cleared before
tuning is carried out.
Start
Press the cd buttons to select Start and then press the OK
button to start tuning.
Tuner type is Cable.
Network ID
Press theef buttons to select Network ID: Auto or nter
digital numbers.
Manual Scan (DTV Mode)
"MMPXTZPVUPNBLFNBOVBMGJOFUVOJOHBEKVTUNFOUTUPUIF
channel under DTV mode.
1. Press the TV.MENU button to display the main menu.
Press the ef buttons to select Channel in the main menu,
then press the d or OK button, it will highlight the first
option.
Move
Modulation
Press the ef buttons to select Modulation:Auto,16QAM,32
QAM,64QAM,128QAM,256QAM.
Start
Press the cdbuttons to select Start and then press the OK
button to start tuning.
Channel
Tuner Type
Auto Scan
Manual Scan
Auto Channel Update
Channel Edit
Favorite Manager
Common Interface
Signal Information
Symbol Rate
Press theef buttons to select Symbol Rate: Auto or nter
digital numbers.
Cable
Off
Manual Scan (ATV Mode)
OK: Select
MENU: Return
EXIT: Exit
"MMPXTZPVUPNBLFNBOVBMGJOFUVOJOHBEKVTUNFOUTJGUIF
channel reception is poor under ATV mode.
1. Press the TV.MENU button to display the main menu.
Press the ef buttons to select Channel in the main menu,
then press the d or OK button, it will highlight the first
option.
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Basic Feature
37
Basic Feature
Simple everyday use
Auto Channel Update
1. Press the TV.MENU button to display the main menu.
Press the ef buttons to select Channel in the main menu,
then press the d or OK button, it will highlight the first
option.
Channel
Tuner Type
Auto Scan
Manual Scan
Auto Channel Update
Channel Edit
Favorite Manager
Common Interface
Signal Information
Cable
Off
2. Press thecd buttons to select Auto Channel Update
and then press the ef button to On or Off.
OK: Select
Move
MENU: Return
EXIT: Exit
2. Press the cd buttons to select Manual Scan and then
press the OK button. On the submenu, select Analog
Manual Scan and then press the OK button.
Analog Manual Scan
Analog Scan
Channel to Save
Colour System
Sound System
AFC
Start
Move
Fine tune
Move
420.25 MHz
CH001
Auto
Auto
Off
0~9 Input
MENU: Return
Channel
Tuner Type
Auto Scan
Manual Scan
Auto Channel Update
Channel Edit
Favorite Manager
Common Interface
Signal Information
Cable
Off
Adjust
MENU: Return
EXIT: Exit
3. Press the EXIT button to exit the menu.
Channel Edit (DTV mode)
EXIT: Exit
Analog Scan
Displays the current frequency, press the efbuttons to
change the frequency.
1. Press the TV.MENU button to display the main menu.
Press the ef buttons to select Channel in the main menu,
then press the d or OK button, it will highlight the first
option.
Channel
Channel to Save
Press the cd buttons to select Channel to Save, press the
efbuttons to select channel number you want to store.
Colour System
Press the cd buttons to select Colou r System, press the
efbuttons to select: Auto / PAL/ SECAM.
Tuner Type
Auto Scan
Manual Scan
Auto Channel Update
Channel Edit
Favorite Manager
Common Interface
Signal Information
Cable
Off
OK: Select
Move
MENU: Return
EXIT: Exit
2. Press the cd buttons to select Channel Edit and then
press the OK button to enter submenu.
Sound System
Press thecd buttons to select Sound System, press the
ef buttons to select: DK/I / BG.
Channel Edit
AFC
Press the cd buttons to select AFC, press the ef buttons
to select On or Off.
Start
Press the cd buttons to select Start, press the ef buttons
to start tuning.
Delete
Move
Skip
Page
Move
MENU: Return
EXIT: Exit
Delete
Press the RED button to delete the selected channel.
Skip
Press the GREEN button to select the channels that you
want to skip when you are selecting channels. Press the
GREEN button again to undo it.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
38
Basic Feature
Basic Feature
Simple everyday use
Move
Press the BLUE button and then press the cd buttons to
move to the selected channel. Press the BLUE to confirm.
Channel Edit (ATV mode)
Favorite Manager
1. Press the TV.MENU button to display the main menu.
Press the efbuttons to select Channel in the main menu,
then press the d or OK button, it will highlight the first
option.
1. Press the TV.MENU button to display the main menu.
Press the ef buttons to select Channel in the main menu,
then press the d or OK button, it will highlight the first
option.
Channel
Tuner Type
Auto Scan
Manual Scan
Auto Channel Update
Channel Edit
Favorite Manager
Common Interface
Signal Information
Channel
Tuner Type
Auto Scan
Manual Scan
Auto Channel Update
Channel Edit
Favorite Manager
Common Interface
Signal Information
Cable
Off
OK: Select
Move
MENU: Return
EXIT: Exit
2. Press the cd buttons to select Favorite Manager and
then press the OK button to enter submenu.
Off
Favorite Manager
NO.
OK: Select
Move
Cable
MENU: Return
Program Name
Fav1
Fav2
Fav3
Fav4
Type
EXIT: Exit
2. Press the cd buttons to select Channel Edit and then
press the OK button to enter submenu.
Favorite1
Channel Edit
Move
Favorite2
Favorite3
Favorite4
EXIT: Exit
Page
MENU: Return
Press the 3&%(3&&/:&--08#-6& button to set the
channel that you are currently watching as set the Favorite1,
Favorite2,Favorite3,Favorite4 programmes.
Delete
Move
Skip
Page
Move
Rename
MENU: Return
EXIT: Exit
Delete
Press the RED button to delete the selected channel.
Skip
Press the GREEN button to select the channels that you
want to skip when you are selecting channels. Press the
GREEN button again to undo it.
Move
Press the BLUE button and then press the cd buttons to
move to the selected channel. Press the BLUE to confirm.
Press the efbuttons to select: Auto / PAL.
TIPS:
Ŕ1SFTTUIFFAV button to set the Favorite List.
Common Interface (DTV mode)
To view the module information.
1. Press the TV.MENU button to display the main menu.
Press the ef buttons to select Channel in the main menu,
then press the d or OK button.
2. Press the cd buttons to select Common Interface and
then press the OK button.
Rename
Press the YELLOW button to rename the selected channel.
Press the cdbuttons to select the characters to represent
the station name. Press the ef buttons to move to the
next character and then press the OK button again to
confirm the new name.
Channel
Tuner Type
Auto Scan
Manual Scan
Auto Channel Update
Channel Edit
Favorite Manager
Common Interface
Signal Information
Move
Cable
Off
OK: Select
MENU: Return
EXIT: Exit
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Basic Feature
39
Basic Feature
Simple everyday use
3. A Common Interface main menu will pop up. Press the
cd buttons to select the items and press the OK button to
confirm.
2. Insert the Common Access Module into the slot. Flip the
Common Access Module to another side and try again if
you feel resistance.
3. Switch the TV on.
Common Interface
To remove the Common Access Module
1. Before you remove the Common Access Module, ensure
that the TV is switched off.
2. Pull the Common Access Module from the slot.
3. Switch the TV on.
Viaccess Conditional Access
Main Menu
1. Consultation
2. Settings
3. Upgrade
Press ‘OK’ to confirm, ‘EXIT’ to quit
Move
OK: Select
MENU: Return
EXIT: Exit
4. Press the EXIT button to exit the menu.
Signal Information (DTV mode)
The common interface allows the use of a Common
Access Module to enable you to view scrambled (pay to
view) services. These services are provided by TopUp TV (UK
only) and others. The Common Access Module and viewing
card can be obtained from the service provider.
1. Press the TV.MENU button to display the main menu.
Press the ef buttons to select Channel in the main menu,
then press the d or OK button.
Do not repeatedly insert or remove the Common
Access Module as this may damage the interface
and cause a malfunction.
This feature is not available in all country.
C (Common Interface)
CI
A
Allows the Common Access Module to be
inserted
and access the content that has been
in
encrypted.
2. Press the cd buttons to select Signal Information and
then press the OK button to view the Signal Information.
Channel
Tuner Type
Auto Scan
Manual Scan
Auto Channel Update
Channel Edit
Favorite Manager
Common Interface
Signal Information
Move
Cable
Off
OK: Select
MENU: Return
EXIT: Exit
3. Press the EXIT button to exit the menu.
Lock System management
Common Access Module
1. Press the TV.MENU button to display the main menu.
Press the ef buttons to select Lock System in the main
menu, then press the d or OK button,it will highlight the
first option.
2. Use the 0-9 buttons to input a 4-digit password to enter
the Lock System menu.
To insert the Common Access Module
1. Before you insert the Common Access Module, ensure
that the TV is switched off and the viewing card is inserted
in accordance with the Service Provider’s instructions.
3. Press the cd buttons to select the option you want to
BEKVTUJO-PDL4ZTUFNNFOV
4. Press the cdef buttons to change the following
settings.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
40
Basic Feature
Basic Feature
Simple everyday use
Clear Lock
Reset all the lock settings to the factory defaults.
Lock System
____
Off
Enter Password
Enable
Channel Locks
Parental Rating
Lock Keypad
New Password
Clear Lock
Move
5. Press the EXIT button to exit the menu.
None
Off
____
0~9: Input
MENU: Return
Setup management
EXIT: Exit
Default password“0000”.
If you change t he password, be sure to
remember the newpassword! If youforget
the new password, press the master
password“4711”.
Enter Password
To access the Lock System menu, you must enter the
password. Enter the default password “0000” for the first
time use.
OSD Language
1. Press the TV.MENU button to display the main menu.
Press theefbuttons to select Setup in the main menu,
then press the dor OK button,it will highlight the first
option.
2. Press thecd buttons to select OSD Language and then
press theefbuttons to select your desired on-screen
display language.
Enable
The lock system is designed to prevent accidental returning
of the TV/losing channels and prevent children watching
unsuitable programme.
Setup
OSD Language
Audio Languages
Subtitle
Teletext
Blue Screen
Mode Setting
Time Settings
PVR Settings
The Lock System must be set to On for this function to
operate. If the Lock System is set to On, a valid password
must be entered when you access Auto Scan / Manual
Scan / Channel Edit /First Time Setup.
Move
English
On
Home Mode
Adjust
MENU: Return
EXIT: Exit
3. Press the EXIT button to exit the menu.
Channel Locks
Channel Locks is designed to prevent children watching
unsuitable programmes. When a channel is blocked, a valid
password must be entered.
Parental Rating
This function allows you to set up blocking schemes to
block specific channels and ratings. Press the buttons to
select an age rating: None, 4-18.
Audio Languages (DTV Mode)
1. Press the MENU button to display the main menu. Press
theef buttons to select Setup in the main menu, then
press the d or OK button,it will highlight the first option.
2. Press the cd buttons to select Audio Languages and
then press the OK button.
Lock Keypad
Key Lock is designed to prevent children from pressing the
buttons on the TV. The Lock System must be set On for this
function to operate.
New Password
Use the 0-9 buttons to input the old password and then
input the new 4-digit password. Re-enter new password for
confirmation.
Setup
English
OSD Language
Audio Languages
Subtitle
Teletext
Blue Screen
Mode Setting
Time Settings
PVR Settings
Move
On
Home Mode
OK: Select
MENU: Return
EXIT: Exit
3. Press the ef buttons to select your desired Audio
Primary Language. Press thedbutton and then press
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Basic Feature
41
Basic Feature
Simple everyday use
theefbuttons to select your desired Audio Secondary
Language.
Hearing Impaired
Press theefbuttons to turn On/Off hearing impaired.
3. Press the EXIT button to exit the menu.
Teletext
Audio Languages
Audio Primary Language
Audio Secondary Language
Move
Adjust
English
English
1. Press the TV.MENU button to display the main menu.
Press the efbuttons to select Setup in the main menu,
then press the d or OK button,it will highlight the first
option.
MENU: Return
EXIT: Exit
4. Press the EXIT button to exit the menu.
Subtitle (DTV Mode)
1. Press the TV.MENU button to display the main menu.
Press the ef buttons to select Setup in the main menu,
then press the d or OK button,it will highlight the first
option.
2. Press the cd buttons to select Teletext and then press
the OK button.
3. Press the ef buttons to select your desired Digital
Teletext Language. Press the d button and then press
the efbuttons to select your desired Decoding Page
Language.
Teletext
2. Press thecd buttons to select Subtitle and then press
the OK button to enter sub-menu.
Digital Teletext Language
Decoding Page Language
Setup
MENU: Return
EXIT: Exit
4. Press the EXIT button to exit the menu.
On
Home Mode
OK: Select
MENU: Return
Blue Screen
EXIT: Exit
Subtitle
Mode
Subtitle Primary Language
Subtitle Secondary Language
Hearing Impaired
Move
Adjust
English
OSD Language
Audio Languages
Subtitle
Teletext
Blue Screen
Mode Setting
Time Settings
PVR Settings
Move
Move
English
West
Adjust
On
English
English
Off
MENU: Return
1. Press the TV.MENU button to display the main menu.
Press the ef buttons to select Setup in the main menu,
then press the d or OK button,it will highlight the first
option.
2. Press the cd buttons to select Blue Screen and then
press theefbutton to select On / Off.
EXIT: Exit
Mode:
Selects to turn On/Off subtitle language.
Subtitle Primary Language
Press the ef buttons to select your desired subtitle primary
language.
Setup
OSD Language
Audio Languages
Subtitle
Teletext
Blue Screen
Mode Setting
Time Settings
PVR Settings
Move
Subtitle Secondary Language
Press theef buttons to select your desired subtitle
secondary language.
Adjust
English
On
Home Mode
MENU: Return
EXIT: Exit
3. Press the EXIT button to exit the menu.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
42
Basic Feature
Basic Feature
Simple everyday use
Mode Setting
1. Press the TV.MENU button to display the main menu.
Press theefbuttons to select Setup in the main menu,
then press the d or OK button,it will highlight the first
option.
2. Press the cd buttons to select Mode Setting and then
press the ef buttons to select your desired mode: Home
Mode/Store Mode.
Ŕ)PNF.PEF7JFXJOHBUIPNF
Ŕ4UPSF.PEF'PSTUPSFEFNPUIFCSJHIUOFTTJTIJHIFSUIBO
home mode.
Auto Sleep
The unit will automatically switch to standby mode 3/4/5
hours after the last time the remote control was used. If you
want to operate the TV for a long period of time, turn off
the auto standby function.
Time Zone
Selects your desired Time Zone city.
Time Settings
10 seconds
Off
4 hours
OSD Time
Sleep Timer
Auto Sleep
Time Zone
Time
Setup
English
OSD Language
Audio Languages
Subtitle
Teletext
Blue Screen
Mode Setting
Time Settings
PVR Settings
Move
Move
MENU: Return
MENU: Return
EXIT: Exit
Time
The clock is set automatically when receiving a digital signal
or you can set it manually.
On
Home Mode
Adjust
Adjust
EXIT: Exit
3. Press the EXIT button to exit the menu.
Time
Time Settings
1. Press the TV.MENU button to display the main menu.
Press the ef buttons to select Setup in the main menu,
then press the d or OK button,it will highlight the first
option.
Move
2. Press the cd buttons to select Time Settings and then
press the OK button.
On
01 Jan 2010
22:33:11
Auto Sync
Date
Time
Adjust
MENU: Return
EXIT: Exit
3. Press the EXIT button to exit the menu.
PVR Settings
1. Press the TV.MENU button to display the main menu.
Press the efbuttons to select Setup in the main menu,
then press the d or OK button,it will highlight the first
option.
Time Settings
10 seconds
Off
4 hours
OSD Time
Sleep Timer
Auto Sleep
Time Zone
Time
2. Press the cd buttons to select PVR Settings and then
press the OK button.
Move
Adjust
MENU: Return
EXIT: Exit
OSD Time
Displays time of the on-screen menu: 10s/20s/30s/60s/Off.
Sleep Timer
Press theefbuttons to select a period of time after which
the TV automatically switches to standby mode: Off/5/15/…
/120/240mins.
3. Press the ef buttons to select the following PVR File
System options and then press the OK button.
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Basic Feature
43
Basic Feature
Simple everyday use
File Manager
Select File Manager to display the recorded programme list,
press the cd buttons to select the recorded programme
and then press the OK or fII button to view.
Setup
File Manager
First Time Setup
Scheduled Record
Standby
Reset
BBC ONE_Pinky and Perky_20081225_100524,is
BBC ONE_Pinky and Perky_20081225_100529,is
BBC ONE_Pinky and Perky_20081225_100530,is
Function
Replay
Delete One
Delete All
Zoom In/Out
Current Playing File Info
Hot Key
Channel Name
Move Up
Move Down
OK
Select
MENU
Return
EXIT
BBC ONE
Program Name
Pinky and Perky
Recorded Time
25 Dec 2008 10:05
Total Time
Move
00:00:20
MENU: Return
EXIT: Exit
3. Press the cdefbuttons to navigate the menu and
change the settings. Then it will search automatically
Parental Pating
Exit
OK: Select
Device List
Select Device List to check the information of the
connected USB storage device for PVR. Press the RED
button to format the selected USB device.
4. Press the EXIT button to exit the menu.
Reset
Device List
Device
Available Space
File System
USB1
1188 MB
FAT32
Format
1. Press the TV.MENU button to display the main menu.
Press the ef buttons to select Setup in the main menu,
then press the d or OK button,it will highlight the first
option.
Format
2. Press the cd buttons to select Reset and then press the
OK button.
Hot Key
Move Up
Move Down
OK
Select
MENU
Return
EXIT
Exit
Scheduled Record
Select Scheduled Record to view the scheduled recordings
list.
Scheduled Record Setting List
Scheduled Record
10:03
Group Frequency
Function
Delete One
Delete All
Hot Key
Move Up
Move Down
OK
Select
MENU
Return
EXIT
Exit
Reset
25 Dec 2008 Thu.
Standby
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Setup
First Time Setup
Channel
Date
Start Time
Duration
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Move
OK: Select
MENU: Return
EXIT: Exit
3. Press the ef buttons to select Yes or No on the screen.
All settings will be reset to factory defaults and the Setup
menu will disappear.
4. Press the EXIT button to exit the menu.
First Time Setup
Setup
1. Press the TV.MENU button to display the main menu.
Press the ef buttons to select Setup in the main menu,
then press the d or OK button,it will highlight the first
option.
2. Press the cd buttons to select First Time Setup and
then press the OK button.
Reset
First Time Setup
Reset
Yes
Move
No
OK: Select
MENU: Return
EXIT: Exit
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
44
Basic Feature
Basic Feature
Simple everyday use
Entertainment
Viewing Photo
Using the Features via USB Port
1. Switch off the TV before connecting any USB storage
device.
1. Press the INPUT button on the top of theTV or the INPUT
button on the remote control then press the cd buttons
to MEDIA and then press the OK button.
2. Connect your USB storage device to the USB port of your
TV.
2. Press the efbuttons to select Photo and then press the
OK button.
3. Press the button on the top of the TV or the button on
the remote control to turn onyour TV and your USB storage
device.
4. Press the INPUT button on the top o f the TV or the
INPUT button on the remotecontrol to display the Source
List. Use the cdbuttons to select MEDIA and then press
the OK button to confirm.
Attention:
Some versions of portable hard disk may require more
power than the TV USB socket can provide. To ensure
correct operation please use power adapter for that device.
Ŕ*GB64#IVCJTVTFENBLFTVSFJUTNBJOTBEBQUFSJT
connected to the mains supply as the total current
consumption exceed 500mA.
Ŕ5IFNBYJNVNTVQQPSUFETUPSBHFTQBDFPGUIFIBSEEJTLJT
1 TB.
Ŕ5IFGJMFTZTUFNPOMZTVQQPSU'"5GPSNBU
Ŕ*GZPVXBOUUPTUPSFUIFWJEFPTUSFBNJOHPGB%57
programme, the transfer rate of the USB storage device
must not be less than 5MB/s, otherwise the picture and
sound of the programme will be affected and a warning
statement will be shown on the screen. If this happens,
please upgrade your USB storage device.
Ŕ5IF57TDSFFOXJMMCFCMBOLUFNQPSBSJMZBTJUXJMMUBLFUJNF
to start up and stabilize the connected hard disk. This is
normal and the starting time may vary depending on the
brand and the memory size of the connected hard disk.
Ŕ%JTDPOOFDUUIF64#TUPSBHFEFWJDFJGJUJTOPUJOVTF
Photo
Music
Movie
Text
3. Press the ef buttons to select your storage device and
then press the OK button.
1/1
Photo
USB1
...
Move
USB1
CH + / - Change Page
OK Selete
EPG Quick Menu
EXIT Return
4. Press the cdefbuttons to navigate in the picture folder
and then press the OK button. If you want to select the
specified photos, press thecdefbuttons to select the
picture file and then press the OK button.
File format supported: JPG.
Photo
USB1
...
AITEMP
MY PVR
Movie
Music
Photo
Text
LE32G
Move
CH + / - Change Page
OK Selete
EPG Quick Menu
EXIT Return
5. Press the OK button to view.
6/12
5_1366x768x24b.jpg
OK Slide Show / Single view
Date 2010-05-13 20:28:40
Resolution 1366x768
Previous / Next
Rotate
EXIT Back
EPG Quick Menu
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Basic Feature
45
Basic Feature
Simple everyday use
6. Press the OK button or the INFO button to display the
function bar: Silde Show / Single view / Previous / Next /
Rotate / Quick Menu (Interval Time / Repeat / Slideshow
Effect / Background Music).
5. Press the fII or OK button to start to play.
Music
USB1/Music/Call Me Maybe.mp3
1/1
Call Me Maybe.mp3
Title
Artist
Album
Track
Year
Date
FileSize
Good Time.mp3
If this folder also contains music files,
you can select a music track to play at
the same time you view your photos.
1. Press the INPUT button on the top of the TV or the
INPUT button on the remote control then press the
cdbuttons to MEDIA and then press the OK button.
2. Press the ef buttons to select Music and then press the
OK button.
Call Me Maybe
Carly Rae Jepsen
Call Me Maybe
2012-02-27
2013-02-01
3.9MB
00 : 00 : 22
7. Press the EXIT button to return to the previous menu.
Listening to Music
1/2
Call Me Maybe.mp3
Move
CH+/- FileList
OK Selete
00 : 03 : 13
EPG Quick Menu
EXIT Return
6. Press the ef buttons and then press the OK button to
select the function: Play / Previous / Next / FB / FF/ Stop /
Quick Menu (Repeat).
7. Press the EXIT button to return to the previous menu.
Viewing Movies
1. Press the INPUT button on the top of the TV or the
INPUT button on the remote control then press the cd
buttons to MEDIA and then press the OK button.
Photo
Music
Movie
2. Press the ef buttons to select Movie and then press the
OK button.
Text
3. Press the cd buttons to select your storage device and
then press the OK button.
Photo
Music
Music
Movie
Text
USB1
USB1
Title
Artist
Album
Track
Year
Date
FileSize
00 : 00 : 00
00 : 00 : 00
3. Press the cd buttons to select your storage device and
then press the OK button.
Movie
Move
Change Page
CH+/- Plalyer
OK Selete
EPG Quick Menu
EXIT Return
4. Press the cdbuttons to navigate in the music folder and
then press the OK button. If you want to select the specified
music, press the cdbuttons to select the music file and
then press the OK button.
USB1
USB1
Music
USB1/Music
Move
Change Page
OK Selete
EPG Quick Menu
EXIT Return
1/1
AITEMP
Title
Artist
Album
Track
Year
Date
FileSize
MY PVR
Movie
Music
Photo
Text
LE32G
00 : 00 : 00
Move
Change Page
CH+/- Plalyer
OK Selete
00 : 00 : 00
EPG Quick Menu
EXIT Return
Some audio file formats will not be supported.
Supported File format: MP3.
4. Press the cd buttons to navigate in the movie folder and
then press the OK button. If you want to select the specified
movie, press the cd buttons to select the movie file and
then press the OK button.
Some audio file formats will not be supported.
Supported File format: MPEG 1/2.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
46
Basic Feature
Basic Feature
Simple everyday use
4. Press the cd buttons to navigate in the text folder and
then press the OK button. If you want to select the specified
text file, press thecd buttons to select the text file and then
press the OK button.
Movie
USB1/Movie
1/1
AITEMP
MY PVR
Movie
Music
Photo
Text
Text
USB1/Text
LE32G
1/1
AITEMP
MY PVR
Movie
Move
Change Page
OK Selete
EPG Quick Menu
Music
EXIT Return
Photo
Text
5. Press the fII or OK button to view.
FileName
VideoCodec :
Resolution
Bitrate :
Animals.AVI
MPEG4
640 x 480
4158120 bps
LE32G
AudioCodec :
MP3
SampleRate :
44100 Hz
Channel :
2
Move
Change Page
OK Selete
EPG Quick Menu
EXIT Return
Text
USB1/Text/English Music .txt
1/1
1 Why are you so far from me?
In my arms is where you ought to be.
English Music .txt
2 How long will you make me wait?
I don’t know how much more I can take.
3 (Chorus:)
I missed you
But I haven’t met you
Oh but I want to
How I do
00 : 00 : 22
00 : 05 : 13
4
6. Press the OK button or the INFO button to display the
function bar. Press the ef buttons and then press the OK
button to select the function: Pause / Previous / Next / FB /
FF / Stop / Quick Menu (Repeat / Encode Type).
7. Press the EXIT button to return to the previous menu.
Move
Change Page
OK Selete
Slowly counting down the days
EPG Quick Menu
EXIT Return
5. Press the fII or OK button to view.
1/12
1 Why are you so far from me?
In my arms is where you ought to be.
2 How long will you make me wait?
I don’t know how much more I can take.
3 (Chorus:)
I missed you
But I haven’t met you
Oh but I want to
How I do
My Text
1. Press the INPUT button on the top of the TV or the
INPUT button on the remote control then press the cd
buttons to MEDIA and then press the OK button.
2. Press the efbuttons to select Text and then press the
OK button.
4
Slowly counting down the days
Previous / Next
0~9: Goto Page
EPG Quick Menu
EXIT Back
6. Press the OK button or the INFO button to display the
function bar. Press the ef buttons and then press the OK
button to select the function: Previous / Next / Goto Page /
Quick Menu (Repeat / Background Music / Encode Type).
If this folder also contains music files,
you can select a music track to play at the
same time you view your texts.
Photo
Music
Movie
Text
7. Press the EXIT button to return to the previous menu.
3. Press the cd buttons to select your storage device and
then press the OK button.
Text
USB1
USB1
Move
Change Page
OK Selete
EPG Quick Menu
EXIT Return
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Basic Feature
47
Using the DVD Features
5
Using the DVD Features
Let’s get started
Using the Bulit-in DVD Player
1.Press the “ ” button on the TV or remote control. Switch
to DVD source using the “INPUT” button on the remote
control.
2. Insert a disc with the label side fac ing towards you. (CD-R,
CD-RW, DVD-R, DVD-RW, CD, DVD+R, or DVD+RW) Allow
10 seconds for the player to load the disc.
3. After the disc is inserted, the TV will will show the content
of the disc automatically.
4. If the DVD player does not play the disc, press the
INPUT button on the top of th e TV or the INPUT button
on the remote control to display the Source List. Use the
TS buttons to select DVD and then press the OK button to
confirm. Press the fII button on the unit or the fII button
on the remote control to start playing.
Using the Bulit-in DVD Player
Disc Types
DVD-VIDEO(Digital
Versatile Disc)
DVD±RW(Audio/Video
format or JPEG les )
DVD±R(DVD Recordable
-Audio/Video
format or JPEG les )
CD-R(CD-Recordable
-Audio/Video
format or JPEG les )
CD-RW(CD-RewritableAudio/Video
format or JPEG les )
AUDIO-CD(Compact
Disc Digital Audio)
Disc
Logo
Record Content
AUDIO+VIDEO
AUDIO+VIDEO+JPEG
AUDIO+VIDEO+JPEG
AUDIO+VIDEO+JPEG
AUDIO+VIDEO+JPEG
AUDIO
Supported Formats
JPEG
Ŕ 5IFGJMFFYUFOTJPOTIBTUPCFKQHBOEOPUKQFH
Ŕ Pictures encoding must comply with JPEG/ ISO format.
Ŕ This DVD player can only display DCFstandard still
pictures or JPEG pictures such as TIFF.
Unable to play disc!
Check label faces front of TV.
Check disc for marks or damage.
Region Code
Both the DVD player and the discs are coded by region.
These regional codes must match in order to play the disc.
If the codes do not match, the disc will not play.
5. Press the
button if you want to remove the disc.
The Region Number for this DVD player is described on the
rear panel of the TV.
Disc Types
DVD-VIDEO
Region code
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
50
Using the DVD Features
Let’s get started
Basic DVD Playback Functions
Playing the DVD
Depending on the disc, a menu may appear on the TV
screen once the disc has loaded. When playing the disc,
you may use the fII button to toggle between Play and
Pause mode. This product also supports Menu / Title /
Sequential / Programme Playback.
Menu Playback (for DVD)
Ŕ'PS%7%EJTDTUIFTDSFFOXJMMEJTQMBZUIF%7%%JTD.FOV
(Root Menu).
Ŕ1SFTTUIFfII button or the OK button to start from the
highlighted content.
Ŕ1SFTTUIFD.MENU button to return to the Root Menu
when playing the disc.
Ŕ'PSTPNF%7%EJTDTZPVNBZOFFEUPQSFTTUIFD.MENU
button or the TITLE button to display the Disc Menu.
Stopping Playback
Ŕ1SFTTUIF„button once to stop. Press the fII button
to resume from where you stopped.
Ŕ1SFTTUIF„button twice to stop. Press the fII button
to start from the beginning.
Ŕ*OPSEFSUPQSPUFDUUIFEJTDQSFTTUIF„button twice and
UIFOQSFTTUIFCVUUPOUPFKFDUUIFEJTD8IFOUIFEJTDJT
FKFDUFEIPMEUIFEJTDFEHFTMJHIUMZBOESFNPWFJUGSPNUIF
disc slot.
Ŕ8IFOOPUVTJOHUIF%7%GVODUJPOJOTUBOECZNPEFPS
using others modes for a long period of time), please take
out the disc to protect the DVD loader and the disc.
Previous / Next (for DVD / CD / Multimedia discs)
Ŕ1SFTTUIFCVUUPOUPQMBZUIFMBTU5JUMF$IBQUFS5SBDL
Ŕ1SFTTUIFCVUUPOUPQMBZUIFOFYU5JUMF$IBQUFS5SBDL
Ŕ1SFTTUIFfII button to return to normal speed playback.
Ŕ'PS%7%EJTDTXIFOTFMFDUJOHCBDLXBSEUPGJSTUUJUMF
chapter, the disc will start from the beginning.
There will be no sound during forward or
backward.
Pause (for DVD / CD / Multimedia discs)
Ŕ'PS$%+1&(EJTDTQSFTTUIFfII button to pause;
press the fII button again to resume playback.
Ŕ'PS%7%EJTDTQSFTTUIFfII button to pause; press the
fII button again to resume playback.
Aspect
Allows you to select the video size of programme stream.
Ŕ1SFTTUIFAspect button to select the size you want.
Audio (for DVD / CD)
Press the AUDIO button to toggle between different audio
modes in sequence.
Ŕ'PS$%EJTDT.POP-FGU.POP3JHIU.JY.POP4UFSFP
Some discs may contain multiple
languages which can be selected by
pressing the AUDIO button.
Audio (for DVD / CD)
When playing DVD, CD disc, press the A-B button to repeat
certain content. Press the A-B button on the start point (A)
and the end point (B) to select the repeat part. Press the A-B
button a third time to cancel the A-B button function and
return to normal playback.
the
button will restart the disc from the
beginning.
If the current track is the last one, pressing
the
button will stop the playback.
Ŕ'PS%7%EJTDTUIFBCPWFGVODUJPOTNBZWFSZEVFUP
different DVD disc’s structure.
Forward / Backward (for DVD / CD / Multimedia discs)
Ŕ5IFSFBSFTQFFETGPSGPSXBSE1SFTTUIFCVUUPO
to toggle between the different forward options in
sequence. (FORWARD x 2 / FORWARD x 4 / FORWARD x 8
/ FORWARD x 16 / FORWARD x 32 / Play).
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
51
Using the DVD Features
Let’s get started
Playing Multimedia Discs
Go To General Setup Page
After loading the multimedia disc, the disc contents will
automatically be displayed and sorted.
In the DVD mode, press the SET-UP button on the remote
control to activate the DVD player OSD menu. Press the WX
buttons to select General , and then press the ST buttons
or OK button to enter the highlighted sub-menu. Press the
SET-UP button to exit the menu.
00:00
00:00
001/004
DISC
File
TV Display
General
Audio
Preference
- - General Setup Page - -
1. Press the WXST buttons to navigate through the folders
and files.
2. Press the 0-9 buttons to select the contents directly
3. When playing or pausing with picture playback, you may
use the WXST buttons to flip / rotate the picture.
TV Display
W ide
OSD Language
Eng
4:3 PanScan
4:3 LetterBox
Screen Saver
On
16:9
Last Memory
Off
Set TV Display Mode
DVD SYSTEM MENU
In the DVD mode, press the SET-UP button on the remote
control to activate the DVD player OSD menu. Press the
WX buttons to select General/Audio/Preference, and then
press the ST buttons or OK button to enter the highlighted
sub-menu. Press the SET-UP button to exit the menu.
Ŕ
4:3 Pan Scan: Choosing this setting if your DVD player
is connected to a normal ratio TV. You can fill the movie
to the entire screen of your TV. This might mean that
parts of the picture (the left and right edges) won’t be
seen.
Ŕ
4:3 Letter Box: Choosing this setting if your DVD player
is connected to a normal ratio TV. You’ll see the movies
in their original aspect ratio (height-to-width ratio).
You’ll see the entire frame of the movie, but it will take
up a smaller portion of the screen vertically. The movie
might appear with black bars at the top and bottom of
the screen.
Ŕ
16: 9: Choose this setting if your DVD player is
connected to a wide screen TV. If you choose this
33 setting and you don’t have a wide screen TV, the
images on the screen may appear distorted due to
vertical compression.
In Setup mode, the disc playback
function will not be available.
General
Audio
Preference
- - General Setup Page - TV Display
W ide
OSD Language
Eng
Screen Saver
On
Last Memory
Off
TV display function related toDVD disc,
need dosc support TV display function.
Go T o General Setup Page
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
52
Using the DVD Features
Let’s get started
OSD Language
Go To Audio Setup Page
General
Audio
Preference
- - General Setup Page - TV Display
W ide
OSD Language
Eng
English
Screen Saver
On
French
Last Memory
Off
German
In the DVD mode, press the SET-UP button on the remote
control to activate the DVD player OSD menu. Press the WX
buttons to select Audio , and then press the ST buttons
or OK button to enter the highlighted sub-menu. Press the
SET-UP button to exit the menu.
Italian
Spanish
Portuguese
Downmix
Dutch
Set OSD Language
--
Set the OSD language to your language of choice.
General
Audio
Analog
Audio Setup Page - -
Preference
Lt/Rt
Downmix
Stereo
Screen Saver
General
Audio
Preference
- - General Setup Page - TV Display
W ide
OSD Language
Eng
Screen Saver
On
On
Last Memory
Off
Off
Set Downmix Mode
Ŕ
Ŕ
Lo/Ro: Mixed stereo surround output.
Lt/Rt: Mixed stereo Lt/Rt output.
Go To Preference Setup Page
Screen Saver
When the player stops or the picture becomes motionless
for a couple of minutes, there will a screen saver to prevent
damage to the display screen.
Ŕ On: To activate screen saver.
Ŕ Off: To disable screen saver.
In the DVD mode, press the SET-UP button on the remote
control to activate the DVD player OSD menu. Press the
WX buttons to select Preference , and then press the ST
buttons or OK button to enter the highlighted sub-menu.
Press the SET-UP button to exit the menu.
Last Memory
TV Type
General
Audio
Preference
General
- - General Setup Page - -
Audio
Preference
- - Preference Page - -
TV Display
W ide
TV T ype
PA L
PA L
OSD Language
Eng
Audio
Eng
Auto
Screen Saver
On
Subtitle
Off
NTSC
Last Memory
Off
DiscMenu
Eng
On
Parental
Off
Password
Default
Set Last Memory State
Ŕ
Ŕ
On: Continue playing from last stop every time.
Off: Close the memory function and play from DVD
start every time.
Set TV Standard
In order for the disc to play, the colour system of the DVD
player, disc and TV should match.
Ŕ
Ŕ
Ŕ
PAL:This is the format used in UK.
Auto:This format can be used if your TV / DVD is
capable of both PAL and NTSC formats and this is the
default setting.
NTSC:This format is used by some other countries, e.g.
USA.
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
53
Using the DVD Features
Let’s get started
Parental
Audio
General
Audio
Preference
General
Audio
- - Preference Page - TV T ype
PA L
TV T ype
PA L
1 Kid Safe
Audio
Eng
English
Audio
Eng
2G
Subtitle
Off
French
Subtitle
Off
3 PG
DiscMenu
Eng
German
DiscMenu
Eng
4 PG 13
Parental
Italian
Parental
5 PGR
Password
Spanish
Password
6R
Default
Portuguese
Default
7 NC17
Dutch
Preferred
Preference
- - Preference Page - -
8 Adult
Set Parental Control
Audio Language
Not all DVD discs support multiple
audio languages.
Set the Audio language to your language of choice.
Subtitle
General
Audio
This function is available only when the
discs have ratings encoded on them.
Allows the user to set a maximum rating level for a movie
that can be played (e.g. PG rating). Movies rated higher than
the level set will not be played. The parental lock can only
be changed after inputting the correct password.
Preference
Password
- - Preference Page - TV T ype
PA L
English
Audio
Eng
French
Subtitle
Off
German
DiscMenu
Eng
Italian
General
Audio
Preference
- - Preference Page - TV T ype
PA L
Parental
Spanish
Audio
Eng
Password
Portuguese
Subtitle
Off
Default
Dutch
DiscMenu
Eng
Off
Parental
Preferred Subtitle Language
Password
Change
Default
Not all DVD discs support multiple
audio languages.
Change Password
Select the Subtitle language.
Disc menu
General
Audio
- - Preference Page - TV T ype
PA L
Audio
Eng
English
Subtitle
Off
French
DiscMenu
Eng
German
Preference
Select Password in the Preference page menu. (Default
password is 8888; Supervisor Password is 8888).You can
change the password, press X button to highlight Change
and press OK.
You will have to enter previous password, then new
password and confirm password again.
Parental
Italian
Password
Spanish
Old Password
Default
Portuguese
New Password
Dutch
Comfirm Pwd
Preferred Menu Language
Select the Disc Menu language.
OK
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
54
Using the DVD Features
Let’s get started
Default
General
Audio
Preference
- - Preference Page - TV T ype
PA L
Audio
Eng
Subtitle
Off
DiscMenu
Eng
Parental
Password
Default
Reset
Load Factory Setting
Choose this option to resume all the setup options to
default settings.
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
55
Other information
6
Other information
Helpful technical information
Specifications
TV Broadcasting
PAL, B/G, D/K, I, SECAM, L/L’
Receiving Channels
VHF (BAND I/III) - UHF (BAND U) - HYPERBAND
Number of Preset Channels
100
Channel Indicator
On Screen Display
RF Aerial Input
75 Ohm (unbalanced)
Operating Voltage
AC 100-240V~ 50/60Hz
Audio
Nicam
Audio Output Power (WRMS.) (10% THD)
2x3W
Panel Dimensions DxLxH (with foot)
134 x 443 x 312 mm
Weight (with foot)
2 .6 kg
Panel Dimensions DxLxH (without foot)
74 x 443 x 274 mm
Weight (without foot)
2.45 kg
Energy Consumption Data
EEI A
On Mode Power Consumption (W)
30W
Standby Mode (W)
0.5W
Maximum Power (W)
36W
Standby Mode
After 4 Hours
Digital reception
MHEG-5 ENGINE compliant with ISO/IEC 13522-5 UK engine Profile 1 - for UK
0CKFDUDBSPVTFMTVQQPSUDPNQMJBOUXJUI*40*&$BOE6,%55QSPGJMFGPS6,
Frequency range: 474-850 MHz for UK models
170-862 MHz for EU models
Transmission standard: DVB-T. MPEG-2
Demodulation: COFDM with 2K/8K FFT mode
FEC: all DVB modes
Video: MP@ML, PAL, 4:3/16:9
Audio: MPEG Layer I&II 32/44.148kHz.
We apologise for any inconvenience caused by any minor inconsistencies in these instructions, which may occur as a
result of product improvements and development.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
58
Other information
Other information
Helpful technical information
Plug replacement - UK and Ireland only
DTS TruSurround
Should you need to replace the plug; the wires in the power
cable are coloured in the following way:
Blue – Neutral ‘N’
Brown – Live ‘L’
As the colours of the wires in the power cable may not
correspond with the coloured markings identifying the
terminals in your plug, and proceed as follows:
The blue wire must be connected to the terminal that is
marked with the letter N.
The brown wire must be connected to the terminal that is
marked with the letter L.
If the power lead is damaged, it must be replaced by a
qualified electrician.
For DTS Patents, see http://patents.dts.com. Manufactured
under license from DTS Licensing Limited. DTS, the Symbol,
& DTS and the Symbol together are registered trademarks
and DTS TruSurround is a trademark of DTS, Inc. © DTS, Inc.
All Rights Reserved.
Connect
brown lead
to ‘L’ - Live
Connect
blue lead
to ‘N’ Neutral
3
L
N
Energy label
This is called the product Fiche – the information needs to
be presented in the following order, also this maybe in the
form of a copy of the label, in colour or black and white –
the label however must display all the information below:
Ŕ4VQQMJFSōTOBNFPSUSBEFNBSL
Ŕ4VQQMJFSōTNPEFMQSPEVDUNPEFMOP
Ŕ5IFFOFSHZFGGJDJFODZDMBTTPGUIFNPEFM
Ŕ5IFWJTJCMFTDSFFOEJBHPOBMJODFOUJNFUSFTBOEJOJODIFT
Ŕ5IFPONPEFQPXFSDPOTVNQUJPO
Ŕ5IFBOOVBMFOFSHZDPOTVNQUJPO
Ŕ5IFTDSFFOSFTPMVUJPOJOQIZTJDBMIPSJ[POUBMBOEWFSUJDBM
pixel count
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Other information
59
Product support
7
Product support
Help is always at hand
Trouble shooting
Image persistence - ghosting
Please note that ghosting may occur while displaying a
persistent image (still or paused image). LCD TVs’ image
persistence may disappear after a short time. Try turning off
the TV for a while. To avoid this, do not leave the screen in
still picture mode for extended periods.
No power
If your TV has no power, please check the power cord plug
is connect to the mains power socket.
Poor picture
1.Have you selected the correct TV system?
2.Is your TV or house aerial located too close to a nonearthed audio equipment or neon lights, etc.?
3.Mountains or high buildings can cause double pictures
or ghost images. Sometimes you can improve the picture
quality by changing the direction of the aerial. Is the picture
or teletext unrecognisable?
4.Check if you have entered the correct frequency.
5.Please retune the channels.
6.The picture quality may degrade when two devices are
connected to the TV at the same time. In such a case,
disconnect one of the devices.
No picture
1.No Picture means that your TV is not receiving a
transmission. Have you selected the correct button on the
remote control? Try once more. Also make sure the correct
input source has been selected.
2.Is the aerial connected properly?
3.Are the plugs connected tightly to the aerial socket?
4.Is the aerial cable damaged?
5.Are suitable plugs used to connect the aerial?
6.If you are in doubt, consult your dealer.
Input sources - can not be selected
1.If you cannot select an input source, it is possible that no
device is connected.
2.Check the AV cables and connections if you have tried to
connect a device.
The DVD picture quality is poor
1.Make sure the DVD disc surface is not damaged (no
scratches,fingerprint etc.).
2.Clean the DVD disc and try again. See instructions in
“Cleaning Discs” to clean your disc properly page 00.
3.Ensure that the DVD disc is in the loader with the label
facing you when looking at the TV screen.
4.A damp DVD disc or condensation may effect the
equipment. Wait for 1 to 2 hours in Stand-by mode to dry
the equipment.
The Disc does not play
1.No disc in the machine - Place a disc into the loader.
2.Disc is incorrectly loaded - Ensure that the DVD disc is in
the loader with the label facing you when looking at the TV
screen.
3.Wrong type of disc. The DVD player cannot play CDROMS etc..
4.The region code of the DVD disc must match the player.
Wrong OSD language
1.Select the language in the setup menu.
2.The language for the sound or subtitles on a DVD disc
cannot be changed.
3.Multilingual sound and/or subtitles are not recorded on
the DVD disc.
4. Try to change the sound or subtitles using DVD’s title
menu. Some DVD’s do not allow the user to change these
settings without using the disc’s menu.
CLASS 1
LASER PRODUCT
No sound
1.Has the TV been set to mute? To cancel mute, press the “
” button, or increase the volume level.
2.Sound is coming from only one speaker. Is the balance
set to one extreme?
Remote control - does not operatea
Your TV no longer responds to the remote control. The
batteries may be exhausted, if so you can still use the
control buttons on the left side of the TV.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
62
Product support
Product support
Help is always at hand
Definition of terms
Angle
Recorded onto some DVD discs are scenes, which have
been simultaneously shot from a number of different angles
(the same scene is shot from the front, from the left side,
from the right side, etc.). With such discs, the ANGLE button
can be used to view the scene from different angles.
Chapter Number
These numbers are recorded on DVD discs. A title
is subdivided into many sections, each of which are
numberd,and specific parts of video persentations can be
searched quickly using these numbers.
Track Number
These numbers are assigned to the tracks, which are
recorded on Audio CDs. They enable specific tracks to be
located quickly.
LPCM
LPCM stands for Pulse Code Modulation and is digital audio.
MPEG
Short for Moving Picture Experts Group. This is an
international standard for compression of moving images.
On some DVDs digital audio has been compressed and
recorded in this format.
Chapter Number
This refers to a high-density optical disc on which
highquality pictures and sound have been recordedm
by means of digital signals. Incorporating a new video
compression technology (MPEG II) and high-density
recording technology. DVD discs enables aesthetically
pleasing fullmotion video to be recorded over long period
of time (for instance, a whole movie can be recorded).
DVD discs have a structure consisting of two 0.6mm thin
discs, which are adhered to each other. Since the thinner
the disc, the higher the density at which the information can
be recorded, a DVD disc has a greater capacity than a single
1.2mm thick disc. Since the two thin discs are adhered to
each other, there is the potential to achieve doule-sided
play sometime in the future for even longer duration play.
Subtitles
These are lines of text appearing at the bottom of the
screen, which translate or transcribe the dialogue.
They are recorded on the DVD discs.
Time Number
This indicates the playtime, which has elapsed from the
start of a disc or a titile. It can be used to find a specific
feature to be used. Availability is determined by the disc’s
manufacturer.)
Title Number
These numbers are recorded on DVD discs. When a disc
contains two or more movies, these movies are numbered
as title 1, title 2, etc.
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
63
Product support
Help is always at hand
Supported file formats
Format
Media
File Extension
Supported (Maximum resolution/Bit rate etc.)
Video
Audio
MPEG1
MPEG Layer
1/2/3
.mpg/.dat/.vob
Movie
MPEG2M
-
-
PMC
Sample Rate: 8K ~ 48KHz
.mp3
-
MPEG 1/2
Layer 1/2/3 MP3)
Sample Rate: 8K ~ 48KHz,
Bit Rate: 64K ~ 320Kbps
Music
Photo
PEG2
Baseline JPEG
W x H = 8192 x 8192 up to 77 Mega-pixel
Support format: 444/ 440/ 422/ 420/ Grayscale
Progressive JPEG
Up to 4 Mega-pixel
Support format: 444/ 440/ 422/ 420/ Grayscale
.jpg
Disposal information
Instructions for waste disposal:
Packaging and packaging aids are recyclable and should
principally be recycled. Packaging materials, such as foil
bag, must be kept away from children.
Information for Users on Disposal of
old Equipment and Batteries (European
Union only)
The cold cathode fluorescent lamp in LCD PANEL contains
a small amount of mercury; please follow the local laws or
regulations for disposal.
Information for Users in European
Union Countries
These symbols indicate that equipment with these symbols
should not be disposed of as general household waste.
If you want to dispose of the product or battery, please
consider the collection systems or facilities for appropriate
recycling.
This symbol on the product or on its packaging means that
your electrical and electronic device should be disposed of
at the end of its service life separately from your household
wastes. There are separate collection systems for recycling
in EU.
Notice: The sign Pb below the symbol for batteries
indicates that this battery contains lead.
For more information, please contact the local authority or
the dealer where you purchased the product.
Products
Battery
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
64
Product support
Product support
Help is always at hand
Help and assistance
If you require any technical guidance or find that your television is not operating as intended, a simple
solution can often be found in the Troubleshooting section of these instructions or online at
www.argos-support.co.uk
If you still require further assistance, call one of our experts on 0345 604 0105* . To help give us give you a fast and
efficient service please have the following information ready:
Model Ref.
You can find these on
Serial number
the rating plate - a small
information panel (usually
a sticker or metal plate) on
the rear of your product
Date of purchase
This will be shown on
your receipt
Local call rates applies*
Lines open 8am-7pm Monday to Saturday and 10am-4pm Sunday.
*Calls to Argos enquiry lines may attract a charge and set up fee from residential lines depending on your call plan/tariff.Mobile and other
providers costs may vary, see www.bt.com/pricing for details.
For security and training purposes, telephone calls to and from customer service centres may be recorded and monitored. Calls from Republic
of Ireland will attract international call charges.
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Product support
65
Product support
Help is always at hand
Disposal
Ŕ Ria sere nitempo rescien imiliae
rsperumquos volorio blam, oditate
corehent destibus aut est, si.
Ŕ dolestest am, que excestiis dio et, solore
parita dolorem ea dolectiam diam quibus
min pedi
Ŕ omniatenim aut qui tem quis et pelitistium
et audae. Equo ea idendes cimagna
temperchic te nonseque nonecate est
ommoluptatem doluptatur anis sint latior
serum volorec epelest omnihicate etus ilita
Ŕ delest, arion corem volupta tiuntis pratis
doluptatet volorro videmped essequid
essimpos di te volorum que sequides
moditatem veliti test, cum solorrum
Ŕ fugiasit ma nam idunt opta sapidic
iendigenit vendio dolupti num volorem
fugiani maximagnieni dolum audit dolore
aborum fuga. Ga. Ficidelit facimin.
*GZPVBSFDSFBUJOHJOTUSVDUJPOTZPV
may find the following links helpful:
www.environmentlaw.org.uk
www.hse.gov.uk/waste/waste-electrical
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
66
Product support
Product support
Help is always at hand
Your Alba Guarantee
This product is guaranteed for twelve months from the date of original purchase. Any defect that arises due to
faulty materials or workmanship will be repaired free of charge (or if applicable the product will be replaced or the
purchase price refunded) where possible during this period by the dealer from who your purchased the unit.
The guarantee is subject to the following provisions:
Ŕ
The guarantee does not cover accidental damage,
misuse, cabinet parts, knobs or consumable items.
Ŕ
The product must be correctly installed and
operated in accordance with the instructions
contained in the manual.
Ŕ
Ŕ
4QFDJGJDBUJPOTBSFTVCKFDUUPDIBOHFXJUIPVUOPUJDF
Ŕ
Alba disclaim any liability for loss or damage arising
from the breakdown of the product.
Ŕ
This guarantee is in addition to and does not
diminish your statutory or legal rights.
It must be used solely for domestic purposes. The
guarantee will be rendered invalid if the product is
re-sold or has been damaged by inexpert repair.
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Product support
67
Contact:
www.argos-support.co.uk
Helpline: 0345 604 0105
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising