UEi DM384 Digital Multimeter with Capacitance

UEi DM384 Digital Multimeter with Capacitance
DM384
Digital Multimeter
ADVANCED TROUBLESHOOTING
TECHNOLOGY FOR TOUGH JOBS!
MIN/MAX capture
• For unattended measurement
monitoring
Test leads and alligator
clips included
Features Include:
• 750 volts AC and 1000 volts DC
• 10 amps AC and DC
• .01 µA DC resolution for flame
safeguard circuit testing
• Frequency to 40 MHz
• Capacitance to 40,000 microfarad
• Resistance to 40 Megohms
• Analog bar graph
• Continuity
• Diode check function
• Autoranging
• Large backlit LCD display
• Low battery indicator
DM384 • Digital Multimeter
The DM384 is a full-sized multimeter specifically
upgraded to meet the needs of today’s HVAC/R
technicians, plant maintenance professionals, and
electricians. MIN/MAX capture for unattended
monitoring, capacitance for checking run/start
capacitors, and frequency for quick verification of
generators, inverters, and control circuit operation.
The new EasyView Display™ allows for superior
viewing in either sunlight or dark work
environments.
The DM384
has the following features:
• New – EasyView Display™
• 750 Volts AC and 1000 Volts DC
• 10 Amps AC and DC
• .01 µA DC resolution for flame safeguard circuit testing
• Frequency to 40 Megahertz
• Capacitance to 40,000 Microfarad
• Resistance to 40 Megohms
• Analog bar graph
• Continuity
• Diode check function
• MIN/MAX captures and data hold
• CE listed CAT III
• Five year limited warranty
Specifications
Function
AC Volts
50 to 500 Hertz
DC Volts
AC Current
50 to 500 Hertz
DC Current
Frequency
(Hertz)
Capacitance
(in farads)
Resistance
Range
Accuracy
400mV, 4V, 40V, 400V
750V
400mV, 4V, 40V, 400V, 1000V
40µA, 400µA, 4mA, 40mA, 400mA
10A
40µA, 400µA, 4mA, 40mA, 400mA
10A
4k, 40k, 400k, 4M, 40M
4n, 40n, 400n, 4µ, 40µ
400µ, 4m, 40m
400Ω, 4Ω, 40KΩ, 400KΩ, 4MΩ
40MΩ
±(1.5% Reading +3 Digits)
±(2.0% Reading +4 Digits)
±(0.5% Reading +3 Digits)
±(2.0% Reading +5 Digits)
±(3.0% Reading +5 Digits)
±(1.0% Reading +3 Digits)
±(2.0% Reading +2 Digits)
±(0.5% Reading +2 Digits)
sine wave @ >2 VRMS
±(3% Reading +4 Digits)
±(1.0% Reading +3 Digits)
±(3.0% Reading +7 Digits)
General Specifications
Height x Width x Depth
O p e rating temperature
Storage Temperature
Relative Humidity (Storage and Use)
Weight
Calibration Frequency
B a t t e ry
7.88” x 3.88” x 4.38 ”
( 200 x 100 x 63 mm)
32˚ to 113˚F (0˚ to 45˚C)
-4˚ to 140˚F (-20˚ to 60˚C)
0% to 80% RH
20 Oz (560 Gra m s )
Annual
9 Volt Alkaline
(NEDA, 1604 or 6F22 or 006P)
Standard Accessories:
500 milliamp Fuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .AF155
12 Amp Fuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .AF160
Test Lead Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ATL55
Alligator Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .AAC3
Optional Accessories:
400 Amp AC/DC Clamp-On Adapter . . . . . . . . . . . . . . . . . .CA30
Dual Input Temperature Adapter . . . . . . . . . . . . . . . . . . . . .TA2K
Thermocouple mV Adapter . . . . . . . . . . . . . . . . . . . . . . . . . .ATHA1
Flame Safeguard Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . .ATLFSG
Soft Carrying Case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .AC319
Distributed By:
PLEASE
RECYCLE
Copyright © 2007 UEi Specifications are subject to change without notice.
L687 7/07
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising