uzivatelsky_manual_EN_na web

uzivatelsky_manual_EN_na web
By way of introduction
Dear customer, thank you for choosing the Czech car security system PATRIOT EU to
protect your vehicle.
Performance and proper functioning of PATRIOT EU depends on the correct unit
installation. We recommend making use of auto electric specialist in your area.
Detailed instruction for use and setting are available on the produced web page:
Alarms transmission
The PATRIOT EU is primarily designed for the use with mobile applications. All
generated alarms are transmitted via push notification on your mobile device and then
displayed in the application. For transmitting a push notification it is necessary to have
a data tariff activated on your mobile device or to be connected to the internet in
another way (a.e.wifi).
In the case where a data connection is not available, the alarm information can be
transferred via SMS up to 2 preset phone numbers. Part of the delivered alarm SMS
is the information about type of alarm, vehicle status and current GPS location with
a link on Google Maps car position. Telephone numbers for the alarm SMS delivery
can be entered using the setup portal on
Alarm notification description
Alarm input information, if connected.
Car battery voltage drop information.
Alarm notification in case of car battery
UNAUTHORIZED CAR MOVEMENT: Car in motion with the ignition OFF.
Vehicle emergency status (accident, crash).
Detection of the vehicle manipulation (e.g. in
case of wheel theft).
Zone IN / OUT.
Information about exceeding the preset speed limit.
SIM card and the subscription period
The supplied PATRIOT EU unit is fitted up a data SIM card with Europe-wide data
tariff. It takes advantages of international and national roaming and in case the
preferred GSM provider has low or no signal, the unit will automatically log to any other
available network.
For testing our product with low cost European data tariff there is a 3 months free of
charge period. The free of charge period starts with the unit SIM card activation.
Before the testing period expiring you will be notified by email and push notification
about the possibility to purchase the tariff for the next period. Payment details you will
find in the mentioned email or you can use the payment portal on
User instructions and settings
Programming the communication module is done via the Setting web portal on, eventually via SMS. The correct unit functioning depends on the
proper setting; we recommend to refer to your fitter or to study properly the user
manual on !
Setting web portal
Web portal for the unit and application settings is available on
The general setting manual you will find under the help button directly in the Setting
web portal. More detailed information are in the PATRIOT EU user manual on in the downloads section.
Installing the mobile application PATRIOT EU
The mobile application is the basic communication channel and control element for the
PATRIOT EU unit. The communication between applications and the unit is based on
data, so your mobile device has to dispose of a data tariff or to be connected to the
data network (ae Wi-Fi).
Install the application in a standard way from Google Play, App Store or Windows
Store. Download links are available on
To log into the mobile application a user account is necessary. Creating an user
After opening the PATRIOT EU application choose the button new account. Enter the
email on which you will obtain the info about new account registration. Choose your
password for the application access, and then click on Create. Prove the email
receiving by clicking the received link and your registration is complete.
Optionally the account can by created in the Setting web portal on in
the section Accounts. When installing the unit into your car provide the fitter your
email where you subsequently receive the login for the application. The application
password can be afterwards changed in the application in the section Settings /
Account / New password.
Adding a car into the application
After installing and testing the unit in your car add, the vehicle into the mobile application Patriot EU.
The application enables you to administrate any number of cars for which you have the
Unit identification number and Safety code. Both figures are stated on the label with
the PATRIOT EU unit.
By pressing the arrow in the left upper corner of the application switch to the setting
screen and with the + symbol chose Add a new car. Enter the unique eight digits Unit
identification number and six digit Safety code, from production preset on 111111.
Both numbers are stated on a label in your packaging of PATRIOT EU. Pls change the
Safety code immediately after taking back your car with the installed unit in the way
nobody unauthorized can have the access.
The safety code can be changed in the application in the section car setting/modify/code of the PATRIOT unit. In case you forget the Safety code. Pls contact the
unit producer.
Controlling the output
By the PATRIOT EU remotely controlled (via application) output you can operate for
example car horn, starter kill, parking heater etc. We recommend verifying by your
fitting company if and how the output was connected.
You have the use of switching the output ON, time switch (the time can be set in in the
Setting web portal in the section HW settings/ Timer setting) Impulse and switching
OFF. The software button of the application controlling the output can be renamed in
the Setting web portal, section HW settings / Text of output button.
Car localization
You can localize your vehicle in the mobile application using the function localize. The
name of the function can be changed in case of need in in the Setting web portal
section HW settings / Text of localize button. Loading the actual position can take few
minutes based on the unit mode. Actualized car data are displayed as a text in the
status bar of application, to see the location in the map switch to the Map screen. In
the Map screen you can find out the user position, plan the route to the car and change
the map format.
This button enables you to call directly preset telephone contacts and to share events
via email or communication applications in your phone. Before dialing the application
will ask you to confirm you really want to make the call.
There is a preset emergency line number 112. You can add and name more contacts
in the application, section settings/SOS.
Screen History
History of the communication with the PATRIOT EU unit includes the alarm type, date,
time, position of the car in the moment of event and an icon depicting if the communication with the unit passed correctly.
Screen State
Will display the unit information current on latest event, event date and time is
displayed in the lower part of the screen.
Car battery voltage, ignition status (ON/OFF), speed, status of output (ON/OFF/TIMER), GSM signal quality and visible GPS satellites.
Zone function
It allows you to define a geographic area with 100m till 50km diameter. After activating
the function you will receive an alert in form of push notification when crossed the
border of the defined area. The function control is in the section car settings/modify/Zone. Position the circle on the required section of the map. In the lower part of the
display chose if the alert will be triggered in the moment of entering or exiting the zone.
Save the setting in the right upper corner of the application.
Speed limit function
Allows you to set a speed limit. When exceeded an alert in form of push notification is
triggered. The function control is in the section car settings/modify/Speed limit. The
setting is possible in the range of 40–200 km/h. Next alert is triggered only after 10
minutes from precedent one.
Producer: F&B COMPANY s.r.o.
+420 585 496 211
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF