WT-100 - Gibas

WT-100 - Gibas
WT-100
WT-100
TOP BRAND
Top Leader
One Hit
Machining
Suitable for Minimum Production
1
WT-100
Innovation Technology
C r e a t i n g Va l u e
of Multitasking Machine
WT-100 2
3
WT-100
High
productivity
Top leader of one-hit machining
No work in process
One-hit machining
Less set up time
WT-100 4
WT-100
5
WT-100
Multi-tasking compact machine
featuring state of the art capabilities
T×2 M×2 Y S×2 C×2
Double turret
Double Milling Motor
Y-axis
Twin-Spindle
C-axes
Capacity
Max. turning diameter / Max. turning length
190mm / 503mm
Distance between spindles
max. 735mm / min. 210mm
Bar capacity
42mm
Chuck size
6” 165mm
Axis travel
Slide travel (X1 / X2)
135 / 135mm
Slide travel (Z1 / Z2 / B)
503 / 503 / 525mm
Slide travel (Y) upper turret
±31mm
Spindle L, R
spindle speed (max.)
6000min -1
L spindle motor
11/7.5kW 75.4/38.6N·m
R spindle motor
11/7.5kW 75.4/38.6N·m
Upper turret
Number of turrets
1
Driven-tool speed
6000min -1
Driven-tool motor
7.1/2.2kW 16/8N·m
Type of turret / Number of indexing pos.
Dodecagonal / 24
Drive type / Number of driven-tool stations
Indivisual rotation / 12
Lower turret
Number of turret
1
Driven-tool speed
6000min -1
Driven-tool motor
7.1/2.2kW 16/8N·m
Type of turret / Number of indexing pos.
Dodecagonal / 24
Drive type / Number of driven-tool stations
Indivisual rotation / 12
General
Floor space
2,300mm × 1,620mm × 1,940mm
Machine Weight
5,650kg
WT-100
WT-100 6
WT-100
Machine Structure
24
s tations
stations
High-rigidity turret
Bar capacity φ42mm
Left Spindle
Spindle motor
11 / 7.5kW
75.4 / 38.6N.m
6000min -1
C-axis
C-axis synchronization control
Standard
Upper turret
Lower turret
Dodecagonal / 24-station
◆ Number of milling stations : 12
◆ Servo-driven turret
Lower turret
7
WT-100
Milling
7.1 / 2.2kW
16 / 8N.m
6000min -1
Standard
Stable Accuracy Ensured
Parts catcher G
Dodecagonal / 24-station
◆ Number of milling stations : 12
◆ Servo-driven turret
Milling
Upper turret
7.1 / 2.2kW
16 / 8N.m
6000min -1
Y-axis stroke ±31mm
Standard
Method
Option
Swing / Hand
Diameter [Dia.mm] φ12 - 42
Workpiece
15 - 150
Length [mm]
size
1.5
Weight [kg]
Cycle time [sec.]
6.1
Ejecting method
Belt conveyor & Chute
Larger window ensures better visibility
Bar capacity φ42mm
Spindle motor
11 / 7.5kW
75.4 / 38.6N.m
6000min -1
Right spindle
Reliable Covers
All moving units including the upper slide, lower slide and B-Axis unit,
are equipped with top class stainless-steel covers and protective wipers,
preventing cutting chip accumulation, and providing cover against cutting
chips and coolant. The whole machining area is leakage-proof thanks to fully
protective covering.
C-axis
Machine Paint : Environment-friendly non-toxic high quality powder coating.
C-axis synchronization control
Standard
WT-100 8
Combining Turning and
WT-100
S×2
M×2
Twin-Spindle
Doubie Milling Motor
L/R Spindle motors
Driven-tool motor
11 / 7.5kW
7.1 / 22kW
Standard
Standard
Rotating speed :
5,000min-1
dia.42mm
Rotating speed : 6,000min-1
100
Output
(kW)
1000
Torque
(N・m)
75.4N・m
100
11kW
(15min. S3 25%)
Torque
(N・m)
40
Output
(kW)
7.0
7.1kW
30
6.5
25
5.0
10
4.0
20
38.6N・m
7.5kW
(S1 CONT.)
16N・m
(S3 15%)
15
10
1
2.2kW
10
8N・m
2.0
(S1 CONT.)
1.0
5
10
100
60
1000
0.1
10000
Spindle speed
(min-1)
4179
1393
1857
6000
The left and right hand side spindles feature 11/ 7.5 kW,
with a maximum 75 N·m high-output motors. This means
that a round part with Dia. 48 mm × Length 110 mm can be
reduced into cutting chips within 26 Seconds, or 2.3 parts
can be turned per minute.
Part size
Dia. 48 × 110 mm
Metal volume 199ml / Part
Material
S45C (JIS)
Cutting depth
4mm
Feed rate
0.6mm/rev
Cutting Speed 250m/min
9
WT-100
Shaft work clamped with both
chucks, can be turned with
synchronized spindles, with up
to 22/15KW cutting power.
3.0
0
1000
2000
3000
4000
5000
6000
min-1
Milling
Flexibility
Faster Cycle Time
From diversified small-lot production to mass production
Whether it is shaft work, bar work, or chuck work, the most suitable machining
for various types of materials can be done in one-chucking.
Get maximum productivity from a machine requiring a compact space
Upper-Left / Lower-Right
Transfer
Upper-Right / Lower-Left
Left hand side 4-axis turning
Right hand side 4-axis turning
Milling
WT-100 10
New
Graphical User Interface
Easy to See
Easy to Understand
Easy to Use
Largest Display : 19” Touch Panel
NT NURSE
LUCK-BEI II
AIRBAG
NT Work Navigator
NT Collision Guard
Manual Handle Retrace
(option)
19" Color LCD Monitor
USB port/
AC100V
With the user in mind, a large high-resolution (19” SXGA 1280x1024) color
LCD is introduced. Nakamura-Tome’s original screens are featured on a
large CNC display unit. Switch between machine status screen and load
graph screen by pressing a single button, or return to the previous NT
screen by simply pressing the NT screen button.
CF
Slot
Touch
panel
STATUS DISPLAY
LOAD GRAPH
USB
port
Open CNC
Several original screens developed by Nakamura-Tome, such as Tool
Setting Screen and Work-piece Status Screen, are featured on this
machine to ensure ease of set up and ease of operation with loading /
unloading devices.
CNC SCREEN
Program storage
length
11
320mm + 320mm 640mm + 640mm
Program registered
number
250 + 250
Tool offset pairs
99+ 99
WT-100
Touch
Pad
PROGRAM CHECK
500 + 500
1280mm + 1280mm
2560mm + 2560mm 5120mm + 5120mm 10240mm + 102400mm
500 + 500 or 1000 + 1000
500 + 500 or 2000 + 2000
Standard
Option
Evolution of User Interface for Improved Support
NT-IPS
Full operator support for more ease of use and reliability
Illuminated Switches
Spindle override
switch
LED light switches are introduced on the operation
panel.
When machine power is on, a backlight makes it
possible to see the switch even in a dark condition.
When pressed, the switch is fully illuminated. When
the spindle, tool spindle or feed override rotary
switches are set to 100%, the lit LED switches enable
the operator to see the override condition from a
distance.
NT-Original screen
Setting and operation
integrated in one screen
Switches on the control panel, NT-setting
screen commands and other buttons were
all put together in one screen. All setting
operations can be done from within one
screen, which is displayed by pushing one
button, ensuring easy operation.
NT SETTING
Coolant setting screen
Coolant setting screen pops up by pushing
one button on the control panel. Easy to
see! Easy to use!
All required information
displayed on one screen
Set up can be easily performed without
changing screens. Graphic displays
of working-area units, such as chucks,
parts, tool spindle, ...etc, are great visual
aids to ensure ease of understanding.
Feed-rate override
switch
Pop up display
By pressing the AUX key, registered screens subsequently pop up,
showing machine conditions on several screens. Thanks to the NTIPS
large screen, it became possible to look at the NC program while
watching 3D interference check, or to look at the CNC coordinates
while watching the machining area through a video camera, ... etc.
Easy to see! Easy to understand! Easy to use!
TOOL SETTING
Coordinate and tool setting
integrated in one Screen
Geometry & wear offsets, work coordinates
and Manual Guide i tool information are all
put together in one screen. Easy to see!
Easy to use!
Monitoring System (op.)
TOOL INFORMATION
It is possible to mount an external
CCD camera inside the machine.
Using the screen controller, the
video camera can be panned,
tilted or zoomed. Additionally, it
is possible to pre-register up to 6
camera positions, which can be
quickly recalled later by simply
pressing the “AUX” key. Full
screen display is also available
by pressing the provided
“ □ ” button, similar to several
Windows applications.
WT-100 12
NT Manual Guide i
Featuring
new
functions!
LUCK-BEI II
A programming guidance system with the ability to generate NC programs (ISO/EIA G-code programs) easily. Processes
created in conversational mode can be cut, copied or moved ensuring flexibility. Additionally, several cycles such as parttransfer cycle, requiring waiting M-codes, are readily made with the "NC program editing support function". The "NC program
simulation function" can be used to check created- programs by tool-path simulation or solid-model animation.
New
■ Process Editing
A function that automatically recognizes and extracts the name and
order of all machining processes, then displays them in table layout.
Machining processes can be moved, copied or swapped easily. In
addition, waiting M-codes can be added with the click of a button.
Automatic CuttingCondition Setting
Function
By setting the material type and
required sur face roughness,
cutting conditions are automatically
generated. These can be also
changed depending on customer’s
experience.
• Separate display based
on spindle selection or
turret selection.
• Displayed in a clear
layout according to
waiting functions
• Program Display
By selecting the material, cutting conditions are
automatically input.
Key Stroke frequency
Reduced
by 50% !!
LUCK-BEI
II
Waiting function is easily input with the push of a button
φ40
φ100
New
■ Fixed Forms
By setting the surface roughness, machining
conditions are automatically input
Generous fixed forms with over 600 patterns (10 times more than
before) are standard.
Fixed forms are easily selected from a menu.
Additional custom made programs can be registered.
100
By introduc ing the “automatic
cutting condition setting function”,
the number of key strokes required
to make a program were reduced
by 50% reduced, compared with
the previous NT- Manual guide
version.
Cutting conditions. End mill
■ Machining Cycle (conversational) Function
In addition to Nakamura-Tome's original NT Work Navigator, which is essential for
multitasking, “soft quill pusher” and other NT-Nurse functions can be programmed easily.
Work navigator programming screen
13
WT-100
Soft work pusher programming screen
Advanced NT Nurse
NT NURSE
–Generous User-friendly Support System–
Full operator support for more ease of use and reliability
For Increased
Productivity!
“NT Nurse” which is standard on all machines, has a new function called "Screen registration". NT Nurse
Functions that are frequently used can be registered, and later called up with one-key stroke. More than
34 NT Nurse functions are available to support improving your productivity.
New NT Nurse call button
Up to two NT Nurse frequently used functions can be registered, and
later called with in one-key stroke.
Load Monitor
Part Status Display
2
2
CUSTOM2
CUSTOM2
Available for machines equipped
with gantry loader
2
CUSTOM2
These are only a few of the available 20 NT Nurse user support functions.
Menu screen
Condition display
Alarm detail display
Spare tool call-up
Power saving function
Tool counter
Offset history
Data Input / Output to Memory Card
In case of 19-inch screen, Auto Monitor-off function is
not available.
Power saving function for PC can be used.
• TOOL COUNTER
• SETTING (SWITCH)
Program data, tool offsets, coordinate offsets, NT-Nurse data
and all other part related-data, can be easily transferred to one
single folder on the memory card with one single stroke, making
machining data for one single part easy to manage and to
recall. A memory card is required for data input/output.
• GR : LOADER PROGRAM CHECK
• TOOL LIFE (Spare tool call-up) • OPERATION MESSAGE • WS : WORK STOCKER POSITION
• HAN-BEI (IN PROCESS MEASUREMENT) • DATA READ/WRITE
• CHUCKING CHECK
• POWER-SAVE SETTING
• OPERATION CONDITION
• LOAD DISPLAY
• GR : SETTING
• B-AXIS DIMENTION SETTING
• OFFSET HISTORY
• QUICK OFFSET INPUT
• GUIDANCE
• SOFT WORK PUSHER
• WORK-PIECE MACHINING STATUS
• ATC DATA SETTING
WT-100 14
Dual safety
NT Collision
Guard
+
Double safety features
Airbag
NT Collision Guard
ACTIVE
SAFETY
New
Preventive safety technology -Machine collisions are avoidable!
Jig less!
Set-up less!
Skill less!
This essential function for
multitasking machines is
standard.
15
WT-100
NT Collision Guard to avoid machine collision before
machining and Air bag function (Abnormal load
detection) to minimize damage even in case of collision
during actual machining.
If interference is detected, the machine stops with the
affected area highlighted in red on the CNC display.
Safety Technology.
"Program and setup is difficult...." "If the
machine stops during the process...." "Costly
jigs and fixtures for Complex parts...." You
m ay h ave s i m i l a r p r o d u c t i o n c o n c e r n s.
Having the NT Nurse system, NT Wor k
Navigator and Overload detection, reduces
manufactur ing headaches and provides
precious production support.
NT Work Navigator
ACTIVESAFETY
X Y Z B C
• Advanced NT Work Navigator !
• No fixtures required
for maximum machine protection
Full operator support for more ease of use and reliability
Airbag
PA SSI V E
SAFETY
(Overload detection)
Input drill
length
Input material
dimension
Inputting a great amount
of data comes with the risk
of making mistakes
That…
Even with barrier function,
machine collisions
may occur
This…
Soft barrier function is not perfect.
If wrong data is input, a collision will
occur.
Input tool overhang
Other companies’
machine
Input jaw shape
Input rotating
center shape
When unavoidable human error
results in machine collision,
there is no reason to panic.
Without Airbag
With Airbag
Machine will not be
Retraction within 0.008 sec
stop immediately.
Crash !
The slide continues to
Within 8 milliseconds after the crash,
move even after collision.
servo motor-feeding direction is
reversed and the machine stops
All Nakamura-Tome machines are
equipped with a safety feature called
“airbag” (overload detection), which
will greatly reduce the impact force
and prevent heavy damage to the
machine.
in EMG mode.
Crash
* This feature does not mean zero impact.
Air Cutting Mode
Index Speed override
Machine set-up essentials
Jump Programming (G411)
Continuous-machining essentials
Axis Torque Limit Function (G359)
Cut-in Check
Program Resume Function
Manual Handle Retrace (op.)
WT-100 16
New
NT Multitasking Office
By integrating 3D CAD models of the machine, chucks, tools and part, with the dynamics of the real machine
(parameter settings) as well as guided programming, Multitasking Office enables virtual planning and
verification of the production process.
Drastically reducing set-up time leads to higher productivity
Efficient Programming for Higher productivity
Virtual simulation of the machining processes using 3D solid models of the
machine, chucks, tool holders and tools, coupled with all the features of
NT-Manual guide I, contribute to not only high efficiency programming and
reduced cycle times, but also prevent collisions and reduce set up time.
Shorter set-up times
■ Features
Program
Office
Change
Check
One cycle
1
Simulation is possible either from Manual guide program
(including 4-digit G-codes), or from ISO NC program.
2
Simulation of Canned cycles such as G71, G83, …etc.
3
Simulation of programs using Jump programming
function (G411) is available as well.
Continuous operation
Just one side operation (either L side or R side)
Effect of NT Multitasking Office
PARTS A
Without
NT
Multitasking
Office
Parts A Production
PARTS B
Parts B
Set up
Parts B Cut trial
Parts B
programming
PARTS C
Parts B Production
Parts C
Set up
Parts C Cut trial
Parts C Production
24H
External replacement
With
NT
Multitasking
Office
Parts A Production
Programming by
NT Multitasking Office
Parts B Parts B
Set up Cut trial
8H
Parts B Production
16H
Parts C Parts C
Set up Cut trial
Reduced
Prodution time
Parts C Production
Reduced
Prodution time
Reduced
Prodution time
External replacement
Part B Cut trial time
reduced by 16 hours
17
WT-100
High productivity!!!
Next job can be started
Programming and machining simulation
can be done in the offi ce.
NT Multitasking Office
+
Programming software
Process split display function
Tool setting display
Simulation software
Interference check
Mechanical structural simulation
Workpiece simulation
Workpiece cutting simulation
Tool data 3 0 0 kinds, all standard
holder s, c huc k 20 kinds data are
already registered, and also possible
to create and register other some
data at exclusive display.
* Other PC is required when working this function.
WT-100 18
Slide Travel Range
367.5
Z1-=251.5
2.5 62
2.5
S.LS
Z1+=251.5
2.5
S.LS
X1
Reference point
S.LS
2.5
340
X1=135
2.5
Z1
Reference point
Y
Reference point
B2
Reference point
2.5
2.5
S.LS
Y+=31
2.5
Left spindle
A2-5
Right spindle
A2-5
X2=135
340
2.5
(φ169)
S.LS
2.5
2.5
S.LS
Y-=31
Y-axis storke (op.)
2.5
X2
Reference point
2.5
2.5
S.LS
S.LS
Z2
Reference point
2.5
2.5
B2=525
MAX.735
S.LS
2.5
S.LS
2.5 62
Z2-=251.5
2.5
2.5
Z2+=251.5
2.5
S.LS
2.5
S.LS
367.5
unit : mm
Machine Dimensions
Chip conveyor
(Installed at the
side of the machine)
Parts Catcher A
(Carrying workpieces
outside machine) (OP.)
Signal towar (3 indicators) (OP.)
431
■ Front and Side Views of WT-100 with Chip conveyor
548
550
670
260
250
2300
30
1095
3395
1100
1031.5
1940
High pressure
coolant pump
(GRUNDFOS) (0P.)
151
148.5
500
563.6
694
1739
Work eject conveyor
64
unit : mm
Multi-Turret Type Multi-Tasking Machine
WT Series
WT-100
φ42
6”
19
WT-100
Tool Interference
340
φ485
Tool clearance
230
150
110
80
φ90
φ90
φ460
φ190
Max. turning diameter
φ90
φ165
φ450
6”chuck
φ135
φ90
5”chuck
φ80
ST135
φ120
φ90
φ80
φ190
unit : mm
Machine Dimensions
■ WT-100 + GR201 + HAKO-BEI B2
(Left ejecting extension)
20°
296 49
1100
565
520
660
135
850
2400
1550
188
3148
275
2356
800
672
Stroke end
163
749
1314
1833
884
26
560
1000
4130
Hand center zero point
1830
2300
Stroke 2540
1270
190
HAKO-BEI
B2
670
735
895
FLOOR
850
610
Spindle
nose (L)
Spindle nose (R)
unit : mm
WT-150II
Standard Bar capacity
Standard Chuck size
WT-250II
WT-300
φ102
12”
WT-100 20
Tooling System Diagram
C21410/C21411
Turning Holder (A)
Forward
C26330
Cross holder
(MAX.φ13)
C21430/C21431
Cut-off holder
Forward
Qualified tool
ロ20×90
ロ19.05×90
F26333
Straight holder
(MAX.φ13)
C21420/C21421
Turning Holder (A)
Reverse
C21440/C21441
Cut-off holder
Reverse
C21416/C21417
Double turning
holder
Qualified tool
ロ20×90
ロ19.05×90
V1115(MT-2)
M2114(MT-1)
V1125(MT-2)
M2124(MT-1)
Turret Hoad
Turning Holder (B)
Metric
M2112(φ25-φ12)
M2113(φ25-φ10)
M2122(φ25.4-φ12.7)
M2123(φ25.4-φ9.525)
Reducing bush
Z8415/Z8425
C22410(φ25)
C22411(φ25.4)
N3170(φ25)
N3180(φ25.4)
Inch
Boring Holder
Set ring
C22416(φ25)
C22417(φ25.4)
Boring Holder
Coolant through
Drill socket
M2110(φ25-φ20)
M2111(φ25-φ16)
M2120(φ25.4-φ19.05)
M2121(φ25.4-φ15.875)
C22412(φ25)
C22413(φ25.4)
Multi-Boring Holder
Tool bush
C21470(□16、φ25)
C21471(□15.875、φ25.4)
Turning Boring Holder
Qualified tool
ロ16×80
ロ15.875×80
W145103
W145102
C21478(□16)
C21479(□15.875)
Double turning holder
21
WT-100
24ST
Machine Specification
■ Capacity
Max. turning diameter
Standard turning doameter
Distance between spindle noses
Max. turning length
Bar capacity
Chuck size
190mm
170mm
max.735mm / min.210mm
503mm
42mm
165mm (6”)
■ Axis travel
Slide travel (X1/X2)
Slide travel (Z1/Z2)
Slide travel (Y)
Slide travel (B)
Rapid feed X1/X2
Rapid feed Z1/Z2
Rapid feed B axis
Rapid feed Y axis
135mm
503mm
±31mm (op.)
525mm
16m/min
40m/min
40m/min
6m/min
■ Left spindle Right spindle
Spindle speed
6000min -1
Spindle speed range
Stepless
Spindle nose
A2-5
Hole through spindle
56mm
Front bearing I.D.
80mm
Hole through draw tube
43mm
■ C-axis
Least input increment
Least command increment
Rapid index speed
Cutting feed rate
C-axis clamp
C-axis engage time
0.001°
0.001°
600min -1
1 - 4800°/min
Disk clamp
1.5sec.
■ Upper & Lower turrets
Type of turret head
Number of tool stations
Number of index positions
Tool size (square shank)
Tool size (round shank)
Dodecagonal drum turret
12station
24
□ 20mm
φ 25mm
■ Rotating tool
Rotary system
Spindle speed
Spindle speed range
Number of rotation tool station
Tool shank
Individual rotation
6000min -1
Stepless
12 × 2
Straight holder φ 1mm - φ 13mm
Cross holder
φ 1mm - φ 13mm
■ Drive motor
Left spindle
Right spindle
Driven tools
11/7.5kW 75.4/38.6N·m
11/7.5kW 75.4/38.6N·m
7.1/2.2kW Max16N·m
■ General
Machine height
Floor space
Floor space
Machine weight
1940mm
2300mm × 1620mm
3600mm × 1620mm *1
5650kg (Y-Axis Spec)
■ Power requirements
Power supply
Air supply
52.5kVA
150 - 200NL/min, 0.5 - 0.7MPa
*1) including right side chip conveyor
●
Safety devices such as various interlocks, fences for robotics, auto loading
device, work stocker, automatic fire extinguisher etc. are available as
options which can be included in your purchase package. Please contact
our local distributor and dealer for your specific requirements.
● Precautions
about the use of cutting coolant
Synthetic Coolants are Damaging to Machine Components. Concerning the
use of cutting fluids, cautions have to be taken on the type of coolant being
used. Among coolants available in the market, some types are damaging to
machine components and should be avoided. Typical damages are turcite
wear, peeling of paint, cracking and damage to plastics and polymers,
expansion of rubber parts, corrosion and rust build up on aluminum
and copper. To prevent such damages, coolants that are synthetic, or
containing chlorine have to be avoided. Machine warranty terms do not
apply to any claims or damage arising from the use of improper coolant.
Control Specification
■ items
Control type
FANUC 31i-B 2CPU 2-PATH
■ Controlled axes
Controlled axes
7axes
Simultaneously controlled axes 3axes (X1, Z1, C) + 4axes (X2, Z2, C, B)
■ Input command
Least input increment
Least command increment
Max. programable dimension
Absolute / Incremental programing
Decimal input
Program code
Inch / Metric conversion
Programable data input
■ Feed function
Cutting feed
Dwel
Feed per minute / Feed per revolution
Thread cutting
Thread cutting retract
Continuous thread cutting
Variable lead threading
Handle feed
Automatic acceleration/decelaration
Linear accel./decel. After cutting feed interpolation
Rapid override
Cutting feed override
AI contouring control I
0.001mm / 0.0001inch (diameter for X-axis) 0.001 degree
X : 0.0005mm, Z : 0.001mm, B : 0.001mm, C : 0.001 degree
±999999.999mm / ±39370.0787in, ±999999.999°
X, Z, C, B( absolute only for B ) / U, W, H
Standard
EIA / ISO automatic recognition
G20 / G21
G10
feed/min X
Z
C
B
feed/rev
:
:
:
:
:
:
1 - 4800mm/min , 0.01 - 188inch/min
1 - 4800mm/min , 0.01 - 188inch/min
1 - 4800degree/min
1 - 4800mm/min , 0.01 - 188inch/min
0.0001 - 500.0000mm/rev,
0.000001 - 9.999999inch/rev
G04
G98 / G99 (feed per rev. for rotating tool will be available from end of December, 2004)
G32 + F (for rotating tool will be available from end of December, 2004)
Standard
Standard (for rotating tool will be available from end of December, 2004)
G34 (for rotating tool will be available from end of December, 2004)
Manual pulse generator 0.001 / 0.01 / 0.1mm (per pulse)
Standard
Standard
F0, 25%, 100% (changeable to every 10% by switch)
0 - 150% (each 10%)
G5.1
■ Programming functions
Part program storage length
Part program editing
Program number search
Sequence number search
Address search
Number of registerable programs
Program storage memory
Malutiple program simultaneous editing
DNC operation through memory card
320m (for each turret)
delete, insert, change
Standard
Standard
Standard
250programs (for each turret)
Backed up by battery
Standard
Standard (Only one turret can access memory card at a time)
(not including memory card)
Extended part program editing Available
■ Operation&display
Operation panel: Display
: Keyboard
19" color LCD
Separate type MDI unit (standard keys)
■ Programming assist function
Circular interpolation R programming
Direct drawing dimension programmingor Chamfering/Corner R
Canned cycle
Maltiple repeatitive canned cycle
Maltiple repeatitive canned cycle II
Canned cycle for drilling
Axis recomposition
Sub program
Balance cut
Custom macro
Addition to custom macro common variables
FS15 tape format
Luck-bei II
Mechanical error compensation
NT work navigator (torque type)
NT Nurse
NT Collision Guard
Standard
Standard (Direct drawing dimension programming is standard)
G90, G92, G94
G70 - G76
Standard
G80 - G89
Standard
Standard
G68, G69
Standard
Standard (After addition, #100 - #199, #500 - #999)
Standard
Standard
Standard
Standard (not including contact bar)
Standard
Standard
■ NT-IPS
O/S
Pointing device
Windows XP Embedded
Touch pad
NOTE) Both GR and Parts catcher G are not available on same machine.
WT-100 22
NAKAMURA-TOME PRECISION INDUSTRY CO., LTD.
http://www.nakamura-tome.co.jp
Netsuno 15, Hakusan city, Ishikawa, 920-2195 Japan
Phone : +81 76 273 8100 Fax : +81 76 273 4312
E-mail : nt-jpn@nakamura-tome.co.jp
* This catalog was published in October, 2012. Specifications, illustrations and data given herein
are subject to change without notice.
* The products in this catalog are controlled based on Japan's "Foreign Exchange and Foreign Trade
Law". The export of the products are subject to an export license by the Japanese government.
Cat.No.0048E06011210N-0411
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising