Panasonic | SCHD550 | Panasonic SCHD550 User manual

Panasonic SCHD550 User manual
CD Stereo System
Operating Instructions
Model No.
SC-HD550
SC-HD350
The illustrations show SC-HD550.
Note:
“EB” on the outer packaging indicates the United
Kingdom.
Before connecting, operating or adjusting this
product, please read these instructions completely.
Please keep this manual for future reference.
EB EP GN
RQT5744-B
Dear Customer
Thank you for purchasing this product.
For optimum performance and safety, please read these
instructions carefully.
Before use
These operating instructions are applicable to the following
systems.
These operating instructions, however, fundamentally explain the
operation of system SC-HD550.
System
SC-HD550
SC-HD350
Amplifier
SE-HD550
SE-HD350
Tuner
ST-HD550
ST-HD350
CD player
SL-HD550
SL-HD350
Cassette deck
RS-HD550
RS-HD350
Speakers
SB-HD550
SB-HD350
Supplied accessories
Please check and identify the supplied
accessories.
AC mains lead.............................................................1 pc.
For United Kingdom
For Continental Europe
(RJA0053-2X)
(RJA0019-X)
For Australia and N.Z.
(RJA0035-X)
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
Remote control (EUR7702010) ..................................1 pc.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE,
BUILT IN CABINET OR IN ANOTHER CONFINED SPACE.
ENSURE THE UNIT IS WELL VENTILATED. ENSURE THAT
CURTAINS AND ANY OTHER MATERIALS DO NOT
OBSTRUCT THE VENTILATION TO PREVENT RISK OF
ELECTRIC SHOCK OR FIRE HAZARD DUE TO
OVERHEATING.
CLASS 1
LASER PRODUCT
Remote control batteries .........................................2 pcs.
FM indoor antenna ....................................................1 pc.
For Europe
For Australia and N.Z.
(RSA0007)
(RSA0006-J)
AM loop antenna set (RSA0033B).............................1 pc.
(Back of product)
Speaker cords
¡Red and black (REE1057).......................................2 pcs.
¡Blue and gray (REE0853) SC-HD550 only ............2 pcs.
(CD player)
Antenna plug adapter (SJP9009) ..............................1 pc.
(United Kingdom only)
DANGER
ADVARSEL
INVISIBLE LASER RADIATION WHEN OPEN.
AVOID DIRECT EXPOSURE TO BEAM.
USYNLIG LASERSTRÅLING VED ÅBNING, NÅR SIKKERHEDSAFBRYDERE
ER UDE AF FUNKTION. UNDGÅ UDSÆTTELSE FOR STRÅLING.
VARO!
(Tuotteen sisällä)
VARNING
OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD OCH
SPÄRREN ÄR URKOPPLAD. BETRAKTA EJ STRÅLEN.
(Apparatens insida)
USYNLIG LASERSTRÅLING NÅR DEKSEL ÅPNES OG SIKKERHEDSLÅS
VORSICHT
2
(Indersiden at apparatet)
AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA
NÄKYMÄTÖNTÄ LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.
ADVARSEL BRYTES. UNNGÅ EKSPONERING FOR STRÅLEN.
RQT5744
(Inside of product)
UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG GEÖFFNET.
NICHT DEM STRAHL AUSSETZEN.
(Produktets innside)
(Im Inneren des Gerätes)
Use numbers indicated in parentheses when asking for replacement
parts.
Table of contents
Safety precautions
Before use
Placement
Radio operations
The radio: manual tuning ......................................................12
The radio: preset tuning ........................................................13
Cassette deck operations
Set the unit up on an even surface away from direct sunlight, high
temperatures, high humidity, and excessive vibration. These
conditions can damage the cabinet and other components, thereby
shortening the unit’s service life.
Place it at least 15 cm away from wall surfaces to avoid distortion
and unwanted acoustical effects.
Do not place heavy items on the unit.
Before use
Safety precautions .....................................................................3
Caution for AC Mains Lead .....................................................4
The remote control ....................................................................5
Installation ....................................................................................5
Connections ................................................................................6
Front panel controls ..................................................................9
Setting the time ........................................................................11
Voltage
Do not use high voltage power sources. This can overload the
unit and cause a fire.
Do not use a DC power source. Check the source carefully when
setting the unit up on a ship or other place where DC is used.
AC mains lead protection
Cassette tapes ..........................................................................14
Compact disc operations
CDs
Ensure the AC mains lead is connected correctly and not
damaged. Poor connection and lead damage can cause fire or
electric shock. Do not pull, bend, or place heavy items on the lead.
Grasp the plug firmly when unplugging the lead. Pulling the AC
mains lead can cause electric shock.
Do not handle the plug with wet hands. This can cause electric
shock.
Normal play .................................................................................16
Other modes of play ....................................................................17
Foreign matter
Recording operations
Before recording ......................................................................19
Preparatory steps ........................................................................19
Recording the radio.................................................................20
Recording CDs
Normal recording .........................................................................21
CD editing....................................................................................21
Do not let metal objects fall inside the unit. This can cause
electric shock or malfunction.
Do not let liquids get into the unit. This can cause electric shock
or malfunction. If this occurs, immediately disconnect the unit from
the power supply and contact your dealer.
Do not spray insecticides onto or into the unit. They contain
flammable gases which can ignite if sprayed into the unit.
Service
Timer operations
Using the timers
The play timer..............................................................................22
The record timer ..........................................................................23
The play and record timers..........................................................24
The sleep timer............................................................................24
Using the timers together ............................................................24
Do not attempt to repair this unit by yourself. If sound is
interrupted, indicators fail to light, smoke appears, or any other
problem that is not covered in these operating instructions occurs,
disconnect the AC mains lead and contact your dealer or an
authorized service center. Electric shock or damage to the unit can
occur if the unit is repaired, disassembled or reconstructed by
unqualified persons.
Extend operating life by disconnecting the unit from the power
source if it is not to be used for a long time.
Reference
Using other equipment ...........................................................25
Convenient functions .............................................................26
Maintenance ..............................................................................26
Troubleshooting guide ...........................................................27
Technical specifications .......................................Back cover
3
RQT5744
Caution for AC Mains Lead
(“EB” area code model only)
WARNING: DO NOT CONNECT EITHER WIRE TO
THE EARTH TERMINAL WHICH IS MARKED WITH
THE LETTER E, BY THE EARTH SYMBOL
OR
COLOURED GREEN OR GREEN/YELLOW.
For your safety, please read the following text carefully.
THIS PLUG IS NOT WATERPROOF–KEEP DRY.
(For United Kingdom)
Before use
This appliance is supplied with a moulded three pin
mains plug for your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that
the replacement fuse has a rating of 5-ampere and that it
is approved by ASTA or BSI to BS1362.
Check for the ASTA mark
or the BSI mark
on the
body of the fuse.
If the plug contains a removable fuse cover you must
ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until
a replacement cover is obtained.
A replacement fuse cover can be purchased from your
local dealer.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of
AC mains plug (figures A and B). Confirm the AC
mains plug fitted and follow the instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
Figure A
CAUTION!
IF THE FITTED MOULDED PLUG IS UNSUITABLE
FOR THE SOCKET OUTLET IN YOUR HOME THEN
THE FUSE SHOULD BE REMOVED AND THE PLUG
CUT OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL
SHOCK IF THE CUT OFF PLUG IS INSERTED INTO
ANY 13-AMPERE SOCKET.
If a new plug is to be fitted please observe the wiring
code as stated below.
If in any doubt please consult a qualified electrician.
Figure B
Fuse cover
IMPORTANT
The wires in this mains lead are coloured in accordance
with the following code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with the coloured
markings identifying the terminals in your plug, proceed
as follows:
The wire which is coloured Blue must be connected to
the terminal which is marked with the letter N or coloured
Black or Blue.
The wire which is coloured Brown must be connected to
the terminal which is marked with the letter L or coloured
Brown or Red.
2. Replace the fuse and close or attach the fuse
cover.
Figure A
Fuse
(5 ampere)
Figure B
Fuse
(5 ampere)
4
RQT5744
The remote control
A
R6/LR6
(AA, UM-3)
1
2
Batteries
Insert so the poles (+ and –) match those in the remote control.
Do not use rechargeable type batteries.
Do not;
¡mix old and new batteries.
¡use different types at the same time.
¡heat or expose to flame.
¡take apart.
¡short circuit.
¡attempt to recharge alkaline or manganese batteries.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any
part of your body.
Before use
A
Remove if the remote control is not going to be used for a long
period of time. Store in a cool, dark place.
Replace if the unit does not respond to the remote control even
when held close to the front panel.
B
B
Use
Aim at the sensor, avoiding obstacles, at a maximum range of
7 meters directly in front of the unit.
¡Keep the transmission window and the unit’s sensor free from
dust.
¡Operation can be affected by strong light sources, such as direct
sunlight, and the glass doors on cabinets.
30˚
30˚
Do not;
¡put heavy objects on the remote control.
¡take the remote control apart.
¡spill liquids onto the remote control.
7m
C
Installation
a
e
c
Side-by-side set-up C
Stacking D
b
d
f
a CD player (SL-HD550/350)
b Tuner (ST-HD550/350)
c Cassette deck (RS-HD550/350)
d Amplifier (SE-HD550/350)
e Left speaker (SB-HD550/350)
f Right speaker (SB-HD550/350)
Note
D
b
d
a
c
¡These speakers do not have magnetic shielding. Do not place
them near televisions, personal computers or other devices easily
influenced by magnetism.
¡Left and right speakers are exactly the same.
Caution
¡ Use the speakers only with the
recommended system. Failure to do so can
damage the amplifier and speakers, and can
cause fire. Consult a qualified service
person if damage occurs or if a sudden
change in performance is apparent.
¡Do not attach these speakers to walls or
ceilings.
5
RQT5744
Connections
Unless otherwise marked, the illustrations show SC-HD550 sold in Europe.
2
3
Before use
Adhesive tape
1
1
(Left)
4
(Right)
4
5
To household
mains socket
3
A
1
2
1
4
To connect cables
Speaker
SC-HD550
SC-HD550
HF
White line
Amplifier
Gray
Blue
Red
Gray
LF
Red
To unplug cables
Black
Black
Hold the connector from
both ends and pull it out.
SC-HD350
2
HF LF
Blue HF LF
R
R
SC-HD350
(For Europe)
Red
FM ANT
75Ω
Red
(For Australia and N.Z.)
FM ANT
75Ω
6
RQT5744
Black
Black
R L
R
L
Basic connections for supplied
accessories
A
Before connection
1
Before use
¡Do not connect the AC mains lead until all other connections
are complete.
¡To prepare the FM antenna (for Australia and N.Z.) and speaker
cables, twist the vinyl tip and pull off.
Flat cables.
Keep the cables as flat as possible against the back of the
unit.
2
FM antenna.
Fix the other end of the antenna where reception is best.
3
AM loop antenna.
Keep loose antenna cord away from other wires and cords.
4
Speaker cables.
Connect the cables to the terminals of the same color.
The illustration shows connection for the right speaker.
Connect the left speaker in the same way.
HF: High Frequency
LF: Low Frequency
Note
¡To prevent damage to circuitry, never short-circuit positive
(+) and negative (–) speaker wires.
¡Be sure to connect only positive (red or gray) wires to
positive (+) terminals and negative (black or blue) wires to
negative (–) terminals.
Incorrect connection can damage unit.
Use only the supplied speakers.
The combination of the system and the front speakers
provides the best sound. Using other speakers can damage
the unit and sound quality will be negatively affected.
(United Kingdom only)
BE SURE TO READ THE CAUTION FOR THE AC
MAINS LEAD ON PAGE 4 BEFORE PROCEEDING TO
STEP 5.
5
Connect the AC mains lead.
Insertion of connector
Even when the connector is perfectly inserted, depending on
the type of inlet used, the front part of the connector may jut
out as shown in the drawing.
However there is no problem using the unit.
Connector
Approx. 6 mm
Appliance inlet
For your reference
Information you enter into the unit’s memory, except for time,
remains intact for up to two weeks after the mains lead is
disconnected.
Note
The included AC mains lead is for use with this unit only. Do not use
it with other equipment.
7
RQT5744
Connections
A
A
a
b
EXT IN
Tuner
Before use
(R)
(R)
¡Turn off the power to all units before making connections.
¡Refer to the manual of the other unit for details.
(Cables and equipment not included.)
DIGITAL
OPTICAL
OUT
CD player
(L)
To listen to other equipment (a)
Connect other equipment to the EXT IN terminals to output sound
through this unit's speakers or to record onto the cassette deck.
You will need a phono equalizer if you connect a record player.
Stereo phono cable (not included)
White (L)
Red (R)
(L)
To make digital recordings from CDs (b)
Remove the dust cap before use.
Use an optical fiber cable to connect other digital recording
equipment to DIGITAL OPTICAL OUT on the back of the CD player.
This connection enables you to make digital recordings.
OUT
DIGITAL
OPTICAL
IN
Record player, etc.
MD deck, etc.
B
External unit connections
FM outdoor antenna
Tuner
Optional antenna connections
Use outdoor antennas if radio reception is poor.
A
75 Ω coaxial
cable
(not included)
(For Europe)
A
B
FM outdoor antenna
Note
(United Kingdom
only)
¡Disconnect the FM indoor antenna.
¡The antenna should be installed by a competent technician.
C
Use the antenna
plug adapter
(included)
AM outdoor antenna
Run a piece of vinyl wire horizontally across a window or other
convenient location.
Note
(For Australia and N.Z.)
;;;
;;;
;;;
;;;
;;;
30 mm
A
;;
;;
;;
C
Tuner
15 mm
AM outdoor antenna
5-12 m
8
RQT5744
¡Leave the loop antenna connected.
¡Disconnect the antenna when the unit is not in use. Do not use
the antenna during an electrical storm.
C
Front panel controls
A
B
A
1
TUNE/TIME ADJUST
REC CLOCK/TIMER
2
SC-HD550 for Europe
u RDS button (RDS) ...................................................................12
i Band select button (FM/AM) ..................................................12
SET
TUNE MODE
3
4
5
RDS
6
FM/AM
7
SC-HD350 SC-HD550 for Australia and N.Z.
u FM band select button (FM) ...................................................12
i AM band select button (AM) ..................................................12
8
B
B
9
10
o
!0
!1
!2
11
INPUT
SELECTOR
VOLUME
BASS
!3
TREBLE
DOWN
UP
PHONES
VGCA
/I
12
13
14
15
16
!4
!5
!6
!7
17
C
18
19
OPEN/CLOSE
20
21
REPEAT
EDIT
22
23
24 25 26
!8
!9
@0
@1
@2
@3
@4
@5
@6
Amplifier
Input selector (INPUT SELECTOR) .......................................25
VGCA indicator (VGCA) .........................................................26
Volume control (VOLUME) .....................................................12
Standby indicator
When the unit is connected to the AC mains supply, this
indicator lights up in standby mode and goes out when the unit
is turned on.
Standby/on switch (8) ..........................................................11
Press to switch the unit from on to standby mode or vice versa.
In standby mode, the unit is still consuming a small amount of
power.
Bass buttons (BASS e, r).....................................................26
Treble buttons (TREBLE e, r) ..............................................26
VGCA (variable gain control amplifier) button (VGCA) .......26
Headphone jack (PHONES)....................................................25
C
RANDOM
Before use
q Display panel
The display also shows information for the cassette deck, CD
player, and amplifier.
w Play timer/record timer button and indicator
(z PLAY/z REC) .........................................................22, 23, 24
e Clock/timer button (CLOCK/TIMER)................................11, 22
r Set button (SET)......................................................................11
t Tuning/time adjust buttons
(TUNE/TIME ADJUST 2, 1)...............................................11,12
y Tuning mode button (TUNE MODE) ......................................12
A
PLAY/
Tuner
CD player
Disc tray
Disc tray open/close button (; OPEN/CLOSE)....................16
Random play button (RANDOM) ...........................................17
Repeat button (REPEAT)........................................................17
CD edit button (EDIT) .............................................................21
Skip/search buttons (u/t , y/i )...............................16
Stop button ( g ) .....................................................................16
Pause button ( h )...................................................................16
Play button and indicator ( q ) ..............................................16
The color of the indicator depends on the operation taking place.
If stopped: orange
If playing: green
9
RQT5744
Front panel controls
A
A
A
Before use
27
28 29
30
31
OPEN/CLOSE
DOLBY NR REV MODE
COUNTER
TPS SKIP
REC PAUSE
(TPS)
RESET
32 33
34
35 36
@7
@8
@9
#0
#1
#2
#3
#4
#5
Dolby noise reduction button (DOLBY NR)..........................14
Reverse mode select button (REV MODE) ...........................14
Tape Program Sensor button (TPS SKIP) ............................15
Cassette holder
Cassette tray open/close button (; OPEN/CLOSE) ............14
Counter button (COUNTER)...................................................19
Counter reset button (RESET) ...............................................14
Record pause button and indicator (* REC PAUSE) ..........20
Playback buttons and indicators (w , q) ..............................14
The color of the indicator depends on the operation taking place.
If stopped, fast forwarding or rewinding: orange
If playing, recording, or carrying out TPS: green
#6 Stop button ( g ) .....................................................................14
#7 Fast forward/rewind buttons [t (TPS) y] .......................15
37
B
38
13
SLEEP
39
PLAY/
REC
CLOCK/
TIMER
1
2
3
4
5
6
≥10
7
8
9
0
21
40
41
11
PLAY MODE REPEAT
CD
TAPE
AUTO/MONO
EXT
2
3
42
CANCEL
10
Remote control
Buttons w, e, !1, !3, and @1 function in the same way as the
controls on the main unit.
B
RQT5744
Cassette deck
TUNER
43
44
45
MUTING
–
VOLUME
+
#8
#9
$0
$1
$2
$3
$4
Sleep timer button (SLEEP) ...................................................24
Numbered buttons ..................................................................13
Play mode button (PLAY MODE) .....................................17, 18
Muting button (MUTING) ........................................................26
Cancel button (CANCEL) .......................................................18
FM mode button (AUTO/MONO) ............................................12
Input select buttons
(CD, TAPE, EXT, TUNER) .....................................12, 15, 16, 25
$5 Basic operating buttons
Function changes according to the source.
Setting the time
1
This is a 24-hour clock.
The example shows how to set the clock for 16:25 (4:25 pm).
1
2
Press [8] to turn the unit on.
q Press [CLOCK/TIMER] to display
“CLOCK”.
CLOCK
2
1
REC
Original display
w Within 7 seconds
Press [SET].
3
3
/I
PLAY
Before use
Each time you press the button:
q Press [TUNE/TIME ADJUST
(2 or 1)] to set the time.
w Press [SET].
The time is set and the original display is restored.
2
1
CLOCK/TIMER
Displaying the clock
Press [CLOCK/TIMER].
The clock is shown for about 5 seconds.
Reset the clock regularly.
SET
2
3
Conserving power
The unit consumes 0.9 W even when it is turned off with [8].
To save power when the unit is not to be used for a long time,
unplug it from the household mains socket.
Remember to reset the radio stations and any other memory
items before using the unit again.
1
TUNE/TIME ADJUST
2
SET
11
RQT5744
The radio: manual tuning
Radio stations can be tuned manually by selecting the station’s
frequency or they can be preset into channels to make it easy to
tune with the remote control (a page 13).
Preparation: Turn the unit on.
4
/I
SC-HD350
SC-HD550 for Australia and N.Z.
1
1
SC-HD550 for Europe
Press [FM/AM] to select the band.
Each time you press the button:
FM v AM
SC-HD350 SC-HD550 for Australia and N.Z.
Radio operations
Press [FM] or [AM] to select the band.
3
1
RDS
2
1 SC-HD550 for Europe
2
Each time you press the button:
MANUAL v PRESET
SC-HD550 for Europe
3
FM/AM
SC-HD350
FM
Press [TUNE MODE] to select
“MANUAL”.
SC-HD550 for Australia and N.Z.
Press [TUNE/TIME ADJUST (2 or 1)]
to select the frequency of the required
station.
“TUNED” is displayed when a radio station is tuned.
“ST” is displayed when a stereo FM broadcast is being
received.
AM
MHz
4
Adjust the volume.
Auto tuning
2
Press and hold [TUNE/TIME ADJUST (2 or 1)] for a moment until
the frequency starts changing rapidly. The unit begins auto tuning,
stopping when it finds a station.
TUNE MODE
RDS broadcasting
SC-HD550 for Europe
3
TUNE/TIME ADJUST
MHz
TUNED ST
This unit can display the text data transmitted by the radio data
system (RDS) available in some areas.
Changing the display
Press [RDS].
Each time you press the button:
/PS display (the name of the station)
/
VOLUME
PTY display (the type of program)
/
4
Frequency display
Note
RDS displays may not be available if reception is poor.
DOWN
UP
A
A
CANCEL
PLAY MODE REPEAT
CD
TAPE
AUTO/MONO
EXT
TUNER
–
12
VOLUME
Remote control only
When the unit is off, press [TUNER].
The unit comes on and starts playing the radio with the volume fading in.
Press [TUNER] again to select the band.
TUNER
MUTING
RQT5744
AUTO/
MONO
One touch play
+
A
If noise is excessive in FM
Remote control only
Press [AUTO/MONO] to display “MONO”. This mode improves
sound quality if reception is weak for some reason but broadcasts
are heard in monaural.
Press [AUTO/MONO] again to cancel the mode. MONO is also
canceled if the frequency is changed.
Leave the tuner in AUTO for normal listening. Stereo and monaural
broadcasts are automatically played as they are received.
FM stations can be preset in monaural. Carry out presetting
manually (a page 13).
The radio: preset tuning
Choose either automatic presetting, which presets all the stations
the tuner can receive, or manual presetting, which allows you to
select the stations to preset and the order they are to be preset in.
There are 39 channels available for presetting.
A
TUNE/TIME ADJUST 2, 1
Automatic presetting
A
Do the following once each for FM and AM.
Preparation: Tune to the frequency presetting is to begin at
(a page 12).
Hold down [SET].
Release the button when “AUTO MEMORY” appears.
The tuner presets all the stations it can receive into the channels in
ascending order. FM stations are preset into channels 1 to 39, and
AM stations are preset into channels 21 to 39.
“SET OK” is shown when presetting is complete and the last station
to be preset is played.
“ERROR” is displayed if the tuner doesn’t receive any stations. Do
presetting manually if this happens (see below).
TUNE MODE
SET
Radio operations
SET
Note
AM stations replace any FM channels that were preset in channels
21 to 39.
TUNED ST
Manual presetting
Preset the stations one at a time.
TUNED ST
q
w
e
r
B
SLEEP
PLAY/
REC
The station occupying a channel is erased if another station is
preset in that channel.
CLOCK/
TIMER
1
2
3
4
5
6
≥10
7
8
9
0
2
B
CD
TAPE
1
AUTO/MONO
EXT
TUNER
Press [TUNER].
The unit automatically comes on.
1
2
MUTING
1
Selecting channels
On the remote control
CANCEL
PLAY MODE REPEAT
Tune to the required station.
Press [SET].
Press [TUNE/TIME ADJUST (2 or 1)] to select a channel.
Press [SET].
Press the numbered buttons to select
the channel.
For channels 1 to 9 press the corresponding number.
For channels 10 or over press [≥10], then the two digits.
e.g. To select channel 21 : [≥10] / [2] / [1]
TUNER
“PGM” lights when a preset station is selected.
2
On the main unit
1. Press [TUNE MODE] to select “PRESET”.
2. Press [TUNE/TIME ADJUST (2 or 1)] to select the channel.
1
2
3
4
5
6
≥10
7
8
9
0
Preset channel
MHz
PGM
TUNED ST
13
RQT5744
Cassette tapes
/I
5
Preparation: Turn the unit on.
1
2 3
1
4
RESET
Make sure the cassette is fully inserted and press
[; OPEN/CLOSE] to close the deck.
2
Press [DOLBY NR] to select Dolby NR
on (“% NR” appears) or off.
3
Press [REV MODE] to select the
reverse mode.
Every time the button is pressed:
!
: One side is played.
/ : Both sides are played.
$ : Both sides are played eight times each.
g
4
1
Press [ w ] or [ q ].
Play begins and the indicator changes to green.
q : to play the forward side (facing up).
w : to play the reverse side (facing down).
OPEN/CLOSE
5
Adjust the volume.
A
Cassette deck operations
Press [; OPEN/CLOSE], insert the
cassette with the tape facing in.
To stop the tape
Press [ g ].
2
DOLBY NR
A
NR
3
Press [RESET].
Cassette tape selection and care
REV MODE
NR
The unit can correctly play the following types. It identifies the type
automatically.
Normal position/TYPE 1
High position/TYPE 2
Metal position/TYPE 4
4
NR
5
Resetting the tape counter
VOLUME
✔
✔
✔
¡Tapes exceeding 100 minutes are thin and can break or get
caught in the mechanism.
¡Tape slack can get caught up in the mechanism and should be
taken up before the tape is played.
¡Endless tapes can get caught up in the deck’s moving parts if
used incorrectly. Use tapes appropriate to this unit’s auto-reverse
mechanism.
Dolby noise reduction
DOWN
UP
Dolby NR reduces “hissing” when playing tapes. It increases the
high frequency region when recording and then reduces it in
playback. Use the same system during playback and recording.
This unit has Dolby B NR which reduces noise to a third.
Prerecorded cassettes and equipment marked “ % ” use Dolby B
NR.
A
RESET
NR
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
14
RQT5744
Cassette tapes
Fast-forwarding and rewinding
A
Press [t (TPS)] or [(TPS) y] while the
tape is stopped.
A
Tape direction
q
w
Fast-forward
y
t
One touch play
B
Remote control only
When a cassette is loaded and the unit is off, press [TAPE].
The unit comes on and starts play in the direction last selected with
the volume fading in.
t (TPS) y
B
Rewind
t
y
CANCEL
Tape program sensor (TPS)
C
CD
TAPE
AUTO/MONO
EXT
TPS finds the beginning of a track and starts play from there. You
can skip up to nine tracks.
TUNER
TAPE
MUTING
–
VOLUME
+
1
Press [TPS SKIP] to select the
number of tracks you want to skip.
2
Press [t (TPS)] or [(TPS) y] to
select the direction.
Tape direction
q
w
C
Backward
t
y
Cassette deck operations
PLAY MODE REPEAT
Forward
y
t
Pressing [t (TPS)] or [(TPS) y] during play takes you to
the beginning of the current track or the next track,
depending on tape direction.
To cancel
Press [ g ].
Note
1
1
2
2
g
¡Stop the tape before changing the TPS direction.
¡TPS may not operate correctly in the following situations:
If the interval between tracks is less than 4 seconds.
If there is noise between tracks.
If there are silent parts within tracks.
TPS SKIP
(TPS)
15
RQT5744
CDs
3
Normal play
/I
1
Preparation: Turn the unit on.
1
Press [; OPEN/CLOSE] to open the
tray.
Set a CD label up on the tray.
Press [; OPEN/CLOSE] to close the tray.
The number of tracks and playing time is displayed if “CD” is
selected as the source.
u/t y/i
g h
1
Total number
of tracks
2
3
2
Total playing
time
Press [ q ] to start play.
Adjust the volume.
To stop the disc
Press [ g ].
OPEN/CLOSE
To pause play
Press [ h ] during play. Press [ h ] or [ q ] to resume play.
Skipping tracks
Press [ u/t ] (backward), or [ y/i ] (forward).
Label must
face upward.
Compact disc operations
Searching through tracks
During play
Press and hold [ u/t ] (backward), or [ y/i ] (forward).
2
Track number
Elapsed play
time
“NO DISC” is displayed
When the unit is in CD mode but a disc isn’t in the player.
Note
3
¡You cannot skip to tracks already played in random play
(a page 17).
¡Skipping is done in the selected order in program play
(a page 18).
¡You can search only within tracks in random and program play.
VOLUME
DOWN
A
UP
A
Remote control only
When a CD is loaded and the unit is off, press [CD].
The unit comes on and starts play with the volume fading in.
CANCEL
PLAY MODE REPEAT
CD
CD
TAPE
AUTO/MONO
EXT
TUNER
B
MUTING
–
B
a
b
One touch play
VOLUME
+
CD selection and care
Choose discs with this mark: (a)
Do not;
¡use irregularly shaped CDs (b).
¡attach extra labels and stickers.
¡use CDs with labels and stickers that are coming off or with
adhesive exuding from under labels and stickers (c).
¡attach scratch-proof covers or any other kind of accessory.
¡write anything on the CD.
¡clean CDs with liquids (Wipe with a soft, dry cloth.).
This unit may not be able to play some CD-R due to the condition of
the recording.
It can not play CD-RW.
c
16
RQT5744
CDs
INPUT SELECTOR
Other modes of play
A
Direct access play:
Starts normal play from a selected track
Remote control only
SLEEP
1-9, 0, ≥10
PLAY/
REC
CLOCK/
TIMER
Preparation:
1
2
3
4
5
6
≥10
7
8
9
0
Press [CD] to put the unit in CD mode.
Select the track with the numbered buttons.
For tracks numbered 10 and over, press [≥10] then the two digits.
CANCEL
PLAY MODE REPEAT
AUTO/MONO
PLAY MODE
REPEAT
CD
TAPE
EXT
TUNER
CD
q
B
MUTING
Repeat play:
Repeats one track or all tracks
g
A
1
2
3
4
5
6
≥10
7
8
9
0
VOLUME
+
During play, press [REPEAT] to select the
repeat mode.
Each time you press the button:
REPEAT TR: Repeats one track.
REPEAT ALL: Repeats all tracks.
REPEAT OFF: Cancels repeat play.
Note
Compact disc operations
–
Repeat is also canceled when you press [ g ].
“&” goes out.
Repeating selected tracks
1. Program the tracks (a page 18).
2. Press [REPEAT] to select “REPEAT ALL”.
RANDOM
C
Random play:
Plays the tracks once each in random order
Preparation:
Turn [INPUT SELECTOR] to select CD mode.
REPEAT
g
Press [RANDOM].
On the remote control
B
1. Press [PLAY MODE] while stopped to display “RND”.
Each time you press the button:
PGM
RND
off (normal play)
REPEAT
2. Press [ q ].
To cancel
Press [ g ] twice so “RND” goes out.
C
RANDOM
RND
17
RQT5744
CDs
Other modes of play
SLEEP
PLAY/
REC
CLOCK/
TIMER
1
2
3
4
5
6
≥10
7
8
9
0
Program play:
Select up to 24 tracks to play in the order you choose
2
Remote control only
CANCEL
CANCEL
Preparation:
Press [CD] to put the unit in CD mode.
1
PLAY MODE REPEAT
CD
TAPE
1
AUTO/MONO
EXT
TUNER
Press [PLAY MODE] to display
“PGM”.
3
CD
MUTING
–
VOLUME
While stopped,
Each time you press the button:
+
PGM
2
1
Compact disc operations
off (normal play)
Enter the track number with the
numbered buttons.
For tracks numbered 10 and over, press [≥10] then the two
digits.
Repeat this step to program the tracks in the required order.
PLAY MODE
3
PGM
2
RND
1
2
3
4
5
6
≥10
7
8
9
0
Programmed
track number
Press [ q ].
All the tracks are played in the selected order.
Programmed
order
To cancel
Press [ g ] twice so “PGM” goes out.
“CLEAR” is displayed.
“FULL” is displayed
If 24 tracks have been programmed. No more tracks can be
programmed.
PGM
“- -:- -” is displayed
If total playing time for the tracks is over 99 minutes and
59 seconds.
PGM
Total playing time
3
To check the contents of the program
Press [ u/t ] or [ y/i ] while stopped. The track numbers
and program positions are displayed in order each time you press
the button.
To add to the end of the program
While stopped, repeat step 2.
Canceling tracks (only while stopped)
18
RQT5744
From the last track
Press [CANCEL]. “CANCEL” is displayed.
A particular track
Select the track with [ u/t ] or
[ y/i ] then press [CANCEL].
All tracks
Press [ g ]. Program play is also cleared.
Before recording
Selection of tapes for recording
The unit automatically identifies the type of tape.
A
Normal position/TYPE 1
High position/ TYPE 2
Metal position/ TYPE 4
A
✔
✔
✔
To display the tape counter while recording
Press [COUNTER].
The counter is displayed for about five seconds.
B
COUNTER
B
Erasure prevention
The illustration shows how to remove the tabs to prevent recording.
To record on the tape again, cover as shown, being careful not to
cover the high position discrimination hole.
Side A
Volume and sound quality
Tab for side “B”
Recordings are unaffected by changes to volume and sound
quality.
Tab for side “A”
To re-record
Normal tape
Hi-position tape
C
Preparatory steps
Do these steps before each recording.
Wind up the leader tape so recording can begin immediately.
C
2
3
1
Press [; OPEN/CLOSE], insert the
cassette with the tape facing in.
Make sure the cassette is fully inserted and press
[; OPEN/CLOSE] to close the deck.
1
2
Recording operations
Detection hole
Press [DOLBY NR] to select Dolby NR
on (“% NR” appears) or off.
(a “Dolby noise reduction” page 14)
3
Press [REV MODE] to select the
reverse mode.
Each time you press the button:
!
: One side only records.
/ and $ : Both sides record (forward / reverse). “$”
automatically changes to “/” when [* REC
PAUSE] is pressed.
1
OPEN/CLOSE
Erasing recordings
2
1.
2.
3.
4.
5.
DOLBY NR
Turn [INPUT SELECTOR] to select “TAPE”.
Press [DOLBY NR] so that “% NR” goes off.
Select the reverse mode.
Press [* REC PAUSE].
Press [w ] or [ q].
NR
3
REV MODE
NR
19
RQT5744
Recording the radio
Preparation: Do the preparatory steps (a page 19).
1
Tune to the required station.
(a page 12 or 13)
2
Press [* REC PAUSE].
The deck goes into the recording standby mode, [* REC
PAUSE] indicator lights and a play indicator starts flashing.
3
Press [w ] or [ q] to start recording.
q : to record on the forward side
w : to record on the reverse side
To stop recording
Press [ g ].
2
2
3
g
To temporarily stop recording
Press [* REC PAUSE].
The deck goes into recording standby mode.
Press the [w ] or [ q] button with the flashing indicator to resume
recording.
REC PAUSE
Recording operations
3
20
RQT5744
Your attention is drawn to the fact that recording pre-recorded
tapes or discs or other published or broadcast material may
infringe copyright laws.
Recording CDs
Preparation: Do the preparatory steps (a page 19).
Insert a CD (a page 16).
2
g
3
A
1
Normal recording
Press [w ] or [ q] then [ g ] to set the
tape direction.
q : to record on the forward side
w : to record on the reverse side
2
Press [* REC PAUSE].
The deck goes into the recording standby mode, [* REC
PAUSE] indicator lights and the play indicator starts flashing.
3
Press [ q] on the CD player.
Recording starts automatically.
Four seconds after the CD finishes, the deck goes into the
recording standby mode.
1,
A
1
To record programmed tracks
Program tracks before step 2 (a steps 1 and 2, page 18).
B
REC PAUSE
This function makes it easier for you to record from a disc.
1
3
Press [w ] or [ q] and then [ g ] to set
the tape direction.
q : to record on the forward side
w : to record on the reverse side
When you select “q”, set the reverse mode to “/”. Now, if a
track is cut off at the end of the forward side, it is re-recorded
on the reverse side.
¡At the end of the reverse side, recording stops and the
current track will be interrupted.
B
1
2
CD editing
Recording operations
2
g
To stop recording
EITHER
Press [ g ] on the CD player.
The deck goes into the recording standby mode four seconds later.
OR
Press [ g ] on the deck.
Recording stops immediately but the CD continues to play.
INPUT
SELECTOR
2
Turn [INPUT SELECTOR] to select CD
mode.
3
Press [EDIT].
Recording starts and “CD EDIT” scrolls across the display.
After edit-recording has finished
The cassette deck automatically stops.
To stop editing
Press [ g ] on the deck or the CD player.
“EDIT OUT” is displayed and both sections stop.
3
EDIT
Editing programmed tracks
Program the tracks (a steps 1 and 2, page 18) before step 3.
21
RQT5744
Using the timers
The play timer
3
This timer starts play of the selected source at the selected time.
The example shows settings for preset radio channel 3 to play
between 6:30 and 7:40, at –40 dB.
Preparation: Turn the unit on, set the time (a page 11), preset
radio stations if you want the timer to start playing the
radio (a page 13).
zPLAY/zREC
1
q Press [CLOCK/TIMER] to select
“z PLAY”.
CLOCK
1
1
z REC
Original display
w Press [SET] within 10 seconds.
2
2
1
z PLAY
CLOCK/TIMER
PLAY
q Press [TUNE/TIME ADJUST (2 or 1)]
to select the condition required and
w press [SET].
Repeat steps q and w to complete items q to r.
q Select the start time.
2
w Select the finish time.
SET
e Select the source.
TUNER
Select a preset channel.
r Select the volume.
1
The timer is now on standby. The display shows each
condition again for 3 seconds each then restores the original
display.
Confirm the [z PLAY/z REC] indicator lights and that
“z PLAY” lights on the display.
TUNE/TIME ADJUST
Timer operations
2
1
PLAY
2
PLAY
3
3
Press [8] to turn the unit off.
The timer starts at the set time with the volume increasing
gradually to the set level.
PLAY
SET
PLAY
PLAY
To cancel the timer
MHz
Turn the unit on.
Press [z PLAY/z REC] so “z PLAY” goes out.
Each time you press the button:
z PLAY
4
3
22
TAPE
If you select TUNER
2
RQT5744
CD
z REC
z PLAY z REC
off (no display)
PLAY
The timer function will be canceled, but the settings stay in the
memory.
/I
Using the timers
The record timer
3
This timer records the radio at the set time.
The example shows settings for recording radio channel 3 from
18:30 to 19:30.
Preparation: Turn the unit on, set the time (a page 11), preset
radio stations (a page 13).
zPLAY/zREC
1
q Press [CLOCK/TIMER] to select
“z REC”.
CLOCK
z PLAY
z REC
Original display
w Press [SET] within 10 seconds.
1
1
1
2
2
CLOCK/TIMER
q Press [TUNE/TIME ADJUST (2 or 1)]
to select the condition required and
w press [SET].
Repeat steps q and w to complete items q to e.
REC
q Select the start time.
w Select the finish time.
2
SET
e Select the preset channel.
The timer is now on standby. The display shows each
condition again for 3 seconds each then restores the original
display.
Confirm the [z PLAY/z REC] indicator lights and that
“z REC” lights on the display.
2
3
Press [8] to turn the unit off.
Recording starts 30 seconds before the set time with the
volume muted during the set time.
1
TUNE/TIME ADJUST
1
REC
2
REC
3
REC
To cancel the timer
Turn the unit on.
Press [z PLAY/z REC] so “z REC” goes out.
Each time you press the button:
z REC
z PLAY z REC
off (no display)
Timer operations
z PLAY
2
SET
REC
3
MHz
The timer function will be canceled, but the settings stay in the
memory.
/I
23
RQT5744
Using the timers
The play and record timers
Checking the timers A
Press [CLOCK/TIMER] to select “z PLAY” (or “z REC”).
The timer conditions are shown in the following order:
Start time / finish time / source / (“z PLAY” only) volume
z PLAY/z REC
The timers can be checked even if the unit is off.
Playing the unit after the timers are set
The unit can be used after the timers are set. Make sure the unit is
off before the set start time.
Turning the timers on and off B
The timers come on at the set time if the [z PLAY/z REC] indicator
is on. Turn them on and off by pressing [z PLAY/z REC]
(a pages 22 and 23).
CLOCK/TIMER
A
Note
If the unit is turned off while a timer is functioning, the finish time
setting will not be activated.
CLOCK/TIMER
C
B
The sleep timer
Remote control only
This timer turns the unit off after a set time.
z PLAY/ z REC
While playing a source
Press [SLEEP] to select the time (minutes).
Each time you press the button:
SLEEP 30
SLEEP 60
SLEEP OFF
SLEEP 120
To cancel the sleep timer
Press [SLEEP] to select “SLEEP OFF”.
“SLEEP” goes out.
C
Timer operations
SLEEP 90
SLEEP
SLEEP
PLAY/
REC
CLOCK/
TIMER
1
2
3
4
5
6
≥10
7
8
9
0
To confirm the remaining time
(While the timer is functioning)
Press [SLEEP].
The remaining time is shown for about five seconds.
To change the setting
Press [SLEEP] to display the remaining time, then press again to
select the required time.
CANCEL
Note
PLAY MODE REPEAT
AUTO/MONO
The sleep timer is canceled if CD editing is started.
Using the timers together
SLEEP
SLEEP
24
RQT5744
Any of the timers can be used together, but ensure the unit is off
before the start time for the record and play timers.
Using other equipment
A
1
Listening to an external source
Turn [INPUT SELECTOR] to select
EXT mode.
1
Each time you turn [INPUT SELECTOR]:
TUNER
CD
TAPE
EXT
On the remote control
Press [EXT].
2
Operate the unit.
See the unit’s manual for details on operation and connection
(a page 8).
B
A
1
Recording an external source
q Turn [INPUT SELECTOR] to select EXT mode.
INPUT
SELECTOR
w Select Dolby NR and reverse mode.
e Press [* REC PAUSE].
r Press [w ] or [ q] to start recording.
t Start the source to be recorded.
See the unit’s manual for details on operation and connection.
To stop recording
Press [ g ] on the deck.
B
Recording CDs onto an external unit
Start recording on the external unit and start playing the CD to be
recorded.
See the unit’s manual for details on operation and connection
(a page 8).
C
3
4
g
C
Using headphones (not included)
Reduce the volume before connection.
Avoid listening for prolonged periods of time to prevent hearing
damage.
Plug type: 3.5 mm stereo.
Reference
2
25
RQT5744
Convenient functions
The VGCA circuit
A
BASS
VGCA: Variable Gain Control Amplifier
You can achieve a clearer sound by using this feature.
TREBLE
Turning the VGCA on and off
Press [VGCA].
How this unit’s VGCA works
VGCA
A
VGCA
1
b
c
a
d
Generally, the rate of noise (N) to sound (S) worsens as you lower
the volume on an amplifier. With this unit, however, the VGCA
circuit changes the gain between 0 and –6 dB, thereby maintaining
the same S/N ratio. This change in gain is then maintained as you
continue to lower the volume, allowing you to enjoy a better S/N
ratio than if the feature was off.
q Structure of the amplifier
a Input
b Electronic volume control
c Variable gain control amplifier
d Power amplifier
w Changes to the S/N ratio when the volume is lowered
(simplified)
e Gain variation range
f Difference between the S/N ratio when the feature is on and off
g Reduction in volume
To adjust the tone quality
B
OFF ON
2
The level can be adjusted between –6 to +6.
S/N
1
2
f
e
ON
OFF
0 dB –6 dB
g
Press [VGCA] to turn the VGCA off.
Press [BASS (e or r)] (bass) or
[TREBLE (e or r)] (treble).
Note
You cannot adjust the tone while VGCA on.
B
1
C
VGCA
Muting the volume
Remote control only
Press [MUTING].
Volume is reduced to minimum.
Reference
2
To cancel
Press [MUTING] again. (“MUTING OFF” lights up.)
To cancel from the unit, turn [VOLUME] to minimum (- - dB), then
raise it to the required level.
Muting is also canceled when the unit is turned off.
BASS
TREBLE
Maintenance
If the surfaces are dirty
C
PLAY MODE REPEAT
CD
TAPE
AUTO/MONO
EXT
TUNER
MUTING
MUTING
MUTING
–
VOLUME
+
To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dipped in a soapand-water solution or a weak detergent solution.
¡Never use alcohol, paint thinner or benzine to clean this unit.
¡Before using chemically impregnated cloth, read the instructions
that came with the cloth carefully.
For a cleaner crisper sound
Clean the heads regularly to assure good quality playback and
recording. Use a cleaning tape (not included).
26
RQT5744
Troubleshooting guide
Before requesting service, make the below checks. If you can’t fix the system as described below, or if something not listed here occurs, refer to
the enclosed directory to locate an Authorized Service Center convenient to you or contact your dealer.
Reference pages are shown as black circled numbers y.
Common Problems
No sound.
Turn the volume up.
The speaker cords may be shorted. Turn the unit off, check and correct the connections and turn the
unit on. y
Sounds unfixed, reversed or
come from one speaker only.
Check the speaker connections. y
Cannot adjust the bass or treble.
Turn the VGCA off. @6
Humming heard during play.
An AC mains lead or fluorescent light is near the cables. Keep other appliances and leads away from
this unit’s cables.
If possible in your area, turn the AC mains lead’s plug or connector over to reverse the lead’s
polarity.
“ERROR” is displayed.
Incorrect operation performed. Read the instructions and try again.
“U70” is displayed.
Connect the flat cables firmly. If “U70” remains on the display, contact the dealer.
“F61” is displayed.
There is a problem with the amplifier. Consult your dealer.
Listening to the radio
Noise is heard.
The stereo indicator flickers or
doesn’t light.
Sound is distorted.
Use an outdoor antenna. i
A beat sound is heard.
Turn the TV off or separate it from the unit.
A low hum is heard during AM
broadcasts.
Separate the antenna from other cables and leads.
The correct AM frequency can’t
be tuned in.
Change the frequency step. Hold [FM/AM] or [AM] down for 10 seconds to change the step to 9 kHz.
The cassette deck
Poor quality sound.
Clean the heads. @6
Check the Dolby NR setting. !4
Recording is not possible.
If the erasure prevention tabs have been removed, cover the holes with adhesive tape. !9
The CD player
The disc may be upside down. !6
Wipe the disc.
Replace the disc if it is scratched, warped, or nonstandard. !6
Condensation may have formed in the player due to a sudden change in temperature. Wait about an
hour for it to clear and try again.
Reference
The display is wrong or play
won’t start.
During CD editing (a Page 21)
“NO TAPE” is displayed.
Load a cassette. !4
“CHANGE TAPE” is displayed.
If the erasure prevention tabs have been removed, cover the holes with adhesive tape. !9
The remote control
The remote control doesn’t work.
Check the batteries are inserted correctly. t
Replace the batteries if they are worn.
All components are required to service the system. If service is ever necessary, bring the entire system.
27
RQT5744
Technical specifications (DIN 45 500)
TUNER
■ Pre-amplifier section
Input sensitivity/impedance
EXT IN
300 mV/15 kΩ
■ Tuner section
FM frequency range
87.50–108.00 MHz
(0.05 MHz step)
FM antenna terminal
75 Ω unbalance
AM frequency range
522–1629 kHz (9 kHz step)
520–1630 kHz (10 kHz step)
■ Timer section
Clock
Quartz lock type
Function
Play timer: everyday
Rec timer: everyday
Sleep timer: 120 min, 30 min intervals
■ GENERAL
Dimensions (W × H × D)
[SC-HD550] 210 × 76.3 × 251 mm
[SC-HD350] 206 × 76.3 × 251 mm
Mass
[SC-HD550] 1.1 kg
[SC-HD350] 1.0 kg
AMPLIFIER
SC-HD550
■ Amplifier section (Low frequency)
Power output
DIN 1 kHz, THD 1%, 6 Ω, both
channel driven
2 × 11 W
RMS 1 kHz, THD 10%, 6 Ω, both
channel driven
2 × 15 W
Total harmonic distortion
Half power, 1 kHz, 6 Ω
0.07%
Load impedance
6Ω
■ Amplifier section (High frequency)
Power output
DIN 10 kHz, THD 1%, 6 Ω, both
channel driven
2×7W
RMS 10 kHz, THD 10%, 6 Ω, both
channel driven
2 × 10 W
Load impedance
6Ω
■ S/N
78 dB
Rated power, 2 V input, VGCA ON 98 dB
■ Headphones
Jack type
3.5 mm STEREO
Load impedance
16–32 Ω
■ General
Power supply
For United Kingdom, Australia and N.Z.
AC 230–240 V, 50 Hz
For Continental Europe
AC 230 V, 50 Hz
Power consumption
79 W
STANDBY condition
0.9 W
Dimensions (W × H × D)
210 × 104.8 × 273 mm
Mass
3.3 kg
AMPLIFIER SC-HD350
SPEAKER SYSTEM SC-HD550
■ Amplifier section
Power output
DIN 1 kHz, THD 1%, 6 Ω, both
channel driven
2 × 17 W
RMS 1 kHz, THD 10%, 6 Ω, both
channel driven
2 × 22 W
Total harmonic distortion
Half power, 1 kHz, 6 Ω
0.07%
Load impedance
6Ω
■ S/N
78 dB
Rated power, 2 V input, VGCA ON 98 dB
■ Headphones
Jack type
3.5 mm STEREO
Load impedance
16–32 Ω
■ General
Power supply
For United Kingdom
AC 230–240 V, 50 Hz
For Continental Europe
AC 230 V, 50 Hz
Power consumption
73 W
STANDBY condition
0.9 W
Dimensions (W × H × D)
206 × 104.8 × 273 mm
Mass
2.7 kg
Type 2 way, 2 speaker, bass-reflex system
Speaker(s)
Woofer:
12 cm cone type
Tweeter:
2.5 cm semi-dome type
Impedance
HIGH *
6Ω
LOW *
6Ω
Input power
HIGH *
30 W (Music), 15 W (DIN)
LOW *
60 W (Music), 30 W (DIN)
Output sound pressure level
86 dB/W (1.0 m)
Cross over frequency
5 kHz
Frequency range
48 Hz–50 kHz (–16 dB)
55 Hz–45 kHz (–10 dB)
■ General
Dimensions (W × H × D)
160 × 334 × 222 mm
Mass
3.2 kg
CD PLAYER
Digital output terminal
Optical × 1
■ Audio section
DA converter
1 bit 2 DAC MASH
■ Format
Sampling frequency
44.1 kHz
■ Pickup
Wavelength
780 nm
■ General
Dimensions (W × H × D)
[SC-HD550] 210 × 76.3 × 246 mm
[SC-HD350] 206 × 76.3 × 246 mm
Mass
[SC-HD550] 1.3 kg
[SC-HD350] 1.2 kg
CASSETTE DECK
■ Audio section
Track system
4 track 2 channel STEREO
Frequency response (Dolby NR off)
TYPE 1 (NORMAL) 30 Hz–16 kHz (DIN)
TYPE 2 (HIGH)
30 Hz–16 kHz (DIN)
TYPE 4 (METAL)
30 Hz–16 kHz (DIN)
S/N (Signal level=max recording level,
TYPE 2)
NR off
56 dB (A weighted)
Dolby B NR
64 dB (A weighted)
■ Motor
Capstan drive
DC servo motor
Reel table drive
DC motor
Fast forward and rewind time (C-60)
Approx. 90 seconds
Wow and flutter
0.1% (WRMS)
■ General
Dimensions (W × H × D)
[SC-HD550] 210 × 104.8 × 241 mm
[SC-HD350] 206 × 104.8 × 241 mm
Mass
[SC-HD550] 1.6 kg
[SC-HD350] 1.5 kg
Matsushita Electric Industrial Co., Ltd.
Osaka 542-8588, Japan
* HIGH stands for High Frequency.
LOW stands for Low Frequency.
SPEAKER SYSTEM SC-HD350
Type 2 way, 2 speaker, bass-reflex system
Speaker(s)
Woofer:
12 cm cone type
Tweeter:
6 cm cone type
Impedance
6Ω
Input power
60 W (Music), 30 W (DIN)
Output sound pressure level
86 dB/W (1.0 m)
Cross over frequency
7 kHz
Frequency range
48 Hz–25 kHz (–16 dB)
55 Hz–22 kHz (–10 dB)
■ General
Dimensions (W × H × D)
160 × 319 × 217 mm
Mass
2.8 kg
Notes:
1. Specifications are subject to change
without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by
the digital spectrum analyzer.
WARNING:
TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK OR PRODUCT
DAMAGE, DO NOT EXPOSE THIS
APPLIANCE TO RAIN, SPLASHING,
DRIPPING OR MOISTURE.
En
RQT5744-B
H1200SG0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising