Engine MITSUBISHI , S16R-PTAA2 Alternator LEROY SOMER

Engine MITSUBISHI , S16R-PTAA2 Alternator LEROY SOMER
T2200
Engine MITSUBISHI , S16R-PTAA2
Alternator LEROY SOMER , LSA51.2M60
STANDARD FEATURES
n
Electronic governor
n
Mechanically welded chassis with antivibration suspension
n
n
Radiator for wiring T°of 50°C [122°F] max with mechanical
fan
Protective grille for fan and rotating parts
Exhaust outlet with flexible and flanges
n
24 V charging alternator and starter
n
Supplied with oil and coolant -30°C
n
User manual and commissioning guide
n
Voltage
415/240
400/230
380/220
Power ESP
kWe/kVA
1760 / 2200
1760 / 2200
1760 / 2200
Power PRP
kWe/kVA
1600 / 2000
1600 / 2000
1600 / 2000
Standby
Amps
3061
3176
3343
Dimensions
Weight
Length: 5497mm [216in]
Width: 2286mm [90in]
Heigth: 2580mm [102in]
14371kg [31683 lbs] Net
14998kg [33065 lbs] Gross
POWER DEFINITION
PRP : Prime Power is available for an unlimited number of annual operating hours in variable load applications, in accordance with ISO
8528-1. A 10% overload capability is available for a period of 1 hour within 12-hour period of operation, in accordance with ISO 3046-1 –
ESP : The standby power rating is applicable for supplying emergency power in variable load applications in accordance with ISO
8528-1. Overload is not allowed.
TERM OF USE
Standard reference conditions 40 °C Air Intlet Temp, 1500 m A.S.L. 60 % relative humidity. All engine performance data based on the
above mentioned maximum continuous ratings.
This document is not contractual - The SDMO company reserves the right to modify any of the characteristics stated in this CD Rom without notice, in a
constant effort to improve the quality of its products.
SDMO Industries – 12bis rue de la Villeneuve – CS 92848 – 29 228 BREST CEDEX 2
Tel +33 (0)2 98 41 41 41 – Fax : +33 (0)2 98 41 63 07 – www.sdmo.com
ENGINE SPECIFICATIONS
Manufacturer / Model
STANDARD
FEATURES
EXHAUST
SYSTEM
FUEL SYSTEM
OIL SYSTEM
THERMAL
BALANCE
AIR INTAKE
COOLANT
SYSTEM
EMISSIONS
LEVEL
Cylinder Arrangement
Displacement
Bore and Stroke
Compression ratio
Rated RPM
Piston Speed
Max. stand by Power at rated RPM
Frequency regulation, steady state
BMEP
Governor : type
Exhaust temperature
Exhaust gas flow
Max back pressure
110% (Stand By power )
100% (of the Prime Power)
75% (of the Prime Power)
50% (of the Prime Power)
Max. fuel pump flow
Total oil capacity w/filters
Oil Pressure low idle
Oil Pressure rated RPM
Oil consumption 100% load
Oil capacity carter
Heat rejection to exhaust
Radiated heat to ambiant
Heat rejection to coolant
Max. intake restriction
Engine air flow
Radiator & engine capacity
Max water temperature
Outlet water temperature
Fan power
Fan air flow w/o restriction
Available restriction on air flow
Type of coolant
Thermostat
PM
CO
Nox
HC
MITSUBISHI S16R-PTAA2 , 4-strokes,
Turbo , [N/A] 16 X
V
65.37L [3989.1C.I.]
170mm [6.7in.] X 180mm [7.1in.]
13.5 : 1
1500 Rpm
9m/s [29.5ft./s]
1895kW [2539BHP]
+/- 0.25%
23.6bar [342psi]
ELEC
524°C [975°F]
7000L/s [14834cfm]
600mm CE [24in. WG]
458.1L/h [121.0gal/hr]
401.7L/h [106.1gal/hr]
307.3L/h [81.2gal/hr]
212.8L/h [56.2gal/hr]
588L/h [155.3gal/hr]
230L [60.8gal]
2.5bar [36.2psi]
6.5bar [94.2psi]
1.5L/h [0.396gal/hr]
140L [37.0gal]
1443kW [82049Btu/mn]
139kW [7904Btu/mn]
N/A
400mm CE [16in. WG]
2650L/s [5616cfm]
413L [109.1gal]
98°C [208°F]
95°C [203°F]
22 kW
23m3/s [48739cfm]
20mm CE [0.8in. WG]
Gencool
71-85 °C
N/A
N/A
N/A
N/A
This document is not contractual - The SDMO company reserves the right to modify any of the characteristics stated in this CD Rom without notice, in a
constant effort to improve the quality of its products.
SDMO Industries – 12bis rue de la Villeneuve – CS 92848 – 29 228 BREST CEDEX 2
Tel +33 (0)2 98 41 41 41 – Fax : +33 (0)2 98 41 63 07 – www.sdmo.com
ALTERNATOR SPECIFICATIONS
GENERAL
DATAS
OTHER
DATAS
Manufacturer
Type
Number of phase
Power factor (Cos Phi)
Altitude
Overspeed
Pole : number
Exciter type
Insulation : class, temperature rise
Voltage regulator
Total harmonics (TGH/THC)
Wave form : NEMA = TIF – TGH/THC
Wave form : CEI = FHT – TGH/THC
Bearing : number
Coupling
Voltage regulation 0 to 100% load
Recovery time (20% Volt dip) ms
SkVA with 90% of nominal sustained voltage (at
0.4PF)
Continuous nominal rating @ 40°C
Standby rating @ 27°C
Efficiencies @ 4/4 load
Air flow
Short circuit ratio;50 (Kcc)
Direct axis synchro reactance unsaturated (Xd)
Quadra axis synchro reactance unsaturated (Xq)
Open circuit time constant;50 (T’do)
Direct axis transient reactance saturated (X’d)
Short circuit transient time constant (T’d)
Direct axis subtransient reactance saturated (X’’d)
Subtransient time constant (T’’d)
Quadra axis subtransient reactance saturated (X’’q)
Zero sequence reactance unsaturated (Xo)
Negative sequence reactance saturated (X2)
Armature time constant (Ta)
No load excitation current (io)
Full load excitation current (ic)
Full load excitation voltage (uc)
Recovery time (Delta U = 20% transitoire)
Motor start (Delta = 20% perm. Or 50% trans.)
Transient dip (4/4 charge) – PF : 1.8 AR
No load losses
Heat rejection
LEROY SOMER
LSA51.2M60
3
0.8
< 1000 m
2250 rpm
4
AREP
H /H
R449
<4%
< 50
< 2%
1
Direct
+/- 1%
< 700 ms
N/A
2050 kVA
2200 kVA
95.7 %
2.5m3/s [5297.18cfm]
0.35
357 %
214 %
2800 ms
31.6 %
250 ms
13.5 %
23 ms
17.5 %
3.3 %
15.7 %
41 ms
1.5 A
5.9 A
62 V
< 700 ms
4000 kVA
12 %
17.5kW [17.50Kw]
70.1 kW
This document is not contractual - The SDMO company reserves the right to modify any of the characteristics stated in this CD Rom without notice, in a
constant effort to improve the quality of its products.
SDMO Industries – 12bis rue de la Villeneuve – CS 92848 – 29 228 BREST CEDEX 2
Tel +33 (0)2 98 41 41 41 – Fax : +33 (0)2 98 41 63 07 – www.sdmo.com
CONTROL PANEL
N/A_COFFRET
Option
M80
Specifications :
Tachometer, Emergency stop button, client connection
terminal strip, EC certified
Engine parameters :
Hours counter, Oil pressure gauge, Water temperature
indicator, Oil pressure indicator
Option
TELYS
Specifications :
Frequency meter, Ammeter, Voltmeter
Alarms and faults Oil pressure, water temperature, No
start-up, Overspeed, Min/max alternator, Min/max
battery voltage, Low fuel level, Emergency stop
Engine parameters Hours counter, Oil pressure, Water
temperature, Engine speed, Battery voltage, Fuel level
Option
KERYS
Specifications :
Frequency meter, Ammeter, Voltmeter
Alarms and faults Oil pressure, water temperature, No
start-up, Overspeed, Min/max alternator, Min/max
battery voltage, Low fuel level, Emergency stop
Engine parameters Hours counter, Oil pressure, Water
temperature, Engine speed, Battery voltage, Fuel level
Additional specifications Website, Troubleshooting,
Assistance and Maintenance, Plotting and logging, Load
impact, 8 configurations available, Compliance with
international standards...
This document is not contractual - The SDMO company reserves the right to modify any of the characteristics stated in this CD Rom without notice, in a
constant effort to improve the quality of its products.
SDMO Industries – 12bis rue de la Villeneuve – CS 92848 – 29 228 BREST CEDEX 2
Tel +33 (0)2 98 41 41 41 – Fax : +33 (0)2 98 41 63 07 – www.sdmo.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising