here - DashCamTalk

here - DashCamTalk
Name Vehicle Video Recorder Manufacturer Pittasoft Co., Ltd. / Korea
Address BYC HIGH CITY A- 7th floor, 371-17, Gasan-Dong, Geumcheon-Gu,
Seoul, 153-803, Korea
Sales Headquater T el: +82-2-6947-4670(#3) l Fax: +82-2-6947-4699
e-mail sales@pittasoft.com
Vehicle Video Recorder
Manual
Table of Contents
Introduction to the Manual 4
5
Getting Started
Cautions for Safety
8
Checks for GPS
8
Checks for the microSD Cards
9
Product Features
11 Package Components
12 Names of Each Part
13 How to Attach & Detach the
Mounting Bracket
How to Install the BlackVue 14 Checking Installation Position
14
How to Insert & Remove the
microSD Card
15Installation
Video Recording
17 Normal Recording
17 Parking Mode Recording
18 Event Recording
Simple Video Playback
19How to Playback using a microSD
Card
22How to Playback using the
BlackVue Application
How to use the BlackVue
Software
24 Installation & Execution
26 Screen Description
27 Video Playback
33Configuration
Firmware Upgrade
Product Specifications &
Standards
38
40 Product Specifications
41 LED Indicators
41 microSD Card Standard
DR500GW-HD
3
Introduction to the Manual
Thank you for purchasing a BlackVue by Pittasoft Co., Ltd.
This instruction manual contains information on how to operate your BlackVue.
Before using the product, make sure to read through this manual so as to use
the product in the correct way.
To enhance the performance of the product, the contents of this instruction
manual may be changed without prior notice.
Warranty & Support
yy This product records and saves videos of vehicle accidents, but it is not
guaranteed to record all accidents. Accidents with light impact that is not
enough to activate the impact detection sensor may not be recorded.
yy In accordance with Personal Information Security Law & related legislation,
Pittasoft Co., Ltd. will not be held responsible for any problem due to illegal
use of this product.
yy The recorded video produced by this product constitutes the secondary
data that may help to determine the circumstances of an accident. Pittasoft
Co., Ltd. will not be held responsible for any loss or damage caused by any
accident.
Copyright & Trademark
yy This instruction manual is protected by Copyright Law, and all rights to it
are protected by law.
yy It is prohibited to reproduce, copy, modify, or translate this instruction
manual without permission.
yy
4
BlackVue is the registered trademark of Pittasoft Co., Ltd.
Pittasoft Co., Ltd. reserves the rights regarding all works related to the BlackVue brand such as product design, trademarks, and product-promotional
videos. It is prohibited to reproduce, copy, modify, or use related works
without permission. Any violation may be penalized in accordance with the
relevant regulations.
Getting Started
Cautions for Safety
The purpose of these cautions is to maintain user safety and avoid damage to
property.
Please make sure to read through this manual so as to use the product in the
correct way.
DANGER
Death or property damage can be caused for users if
the following directions are not followed:
yy Do not disassemble, repair, or modify the product yourself.
It can cause fire, electric shock, or malfunction. For internal inspection and
repair, call the sales headquater.
yy If any foreign matter gets inside the product, detach the power cord
straightaway.
Call the sales headquater for repair.
yy Do not operate the product while driving.
It can cause an accident. Stop or park your car in a safe place to operate it.
yy Do not install the product where it can interfere with the driver's vision.
It can cause an accident.
yy Do not use a damaged or modified power cord. Use the cords provided
by the manufacturer.
Otherwise it can cause explosion, fire, or malfunction.
yy Do not operate the product with wet hands.
It can cause electric shock.
yy Do not install it in an environment with high humidity, or combustible
gases or liquids.
It can cause explosion & fire.
DR500GW-HD
5
WARNING
Death or serious injury can be caused for users if the
following directions are not followed:
yy Do not leave the product where infants, children, or pets can reach it.
They might swallow small components, or their saliva could get into it and
cause an explosion due to a short circuit.
yy While cleaning the inside of the car, do not spray water or wax directly
onto the product.
It can cause fire, electric shock, or malfunction.
yy If smoke or an unsual smell is emitted from the power cord, detach it
immediately.
Call the sales headquater or the dealer.
yy Keep the terminal of the power cord clean.
A dirty terminal can cause excessive heat and fire.
yy Use the correct input voltage.
Otherwise it can cause explosion, fire, or malfunction.
yy Connect the power cord firmly so that it cannot easily be disconnected.
Othersise it can cause fire.
yy Do not cover the product with any material.
It can cause external deformation of the product or fire. Use the product
and peripherals where ventilation is ensured.
6
CAUTION
Injury or property damage can be caused for users if
the following directions are not followed:
yy Do not spray cleaning products directly onto the outside of the product.
It can cause discoloration, cracks, or malfunction.
yy Do not press the RESET button with a sharp object such as an awl.
It can cause damage or malfunction.
yy If the product is used outside the optimal temperature range (0°C ~
60°C), performance can decline or malfunction can be caused.
yy Make sure that the product is installed properly.
The product can fall as a result of vibration, and may cause physical injury.
yy While entering or exiting a tunnel, during daytime in the face of bright
sunlight, or at night with no light, the quality of recorded video can
deteriorate.
yy If the product is damaged or the power supply is cut due to an accident,
video may not be recorded.
yy Excessively tinted windshield glass can distort the recorded video or
cause it to be indistinct.
yy Prolonged use of the product can increase the interior temperature
and cause burns.
yy microSD cards are a consumable so replace them after prolonged use.
They may not record video correctly after a long time in use, so check their
recording capability periodically and replace it as necessary.
yy Clean the lens regularly.
Foreign material attached to the lens can affect the recording quality.
yy Do not remove the microSD card while it is saving or reading data.
The data can be damaged or malfunction caused.
yy Do not use the BlackVue, while cover is open.
DR500GW-HD
7
Checks for GPS
Even if the GPS isn't working, video is recorded, but position coordinates and
driving speed are not recorded. When used for the first time, or when the product is not used for 3 consecutive days, it will take some time for the GPS to find
the current position.
If there is an error with the GPS time when checking recorded video with a
viewer program or the BlackVue application, turn the GPS off and on after a
signal is received.
Make sure to observe the following for an uninterrupted GPS signal.
yy Do not place any objects on the GPS.
yy Do not have the windshield glass tinted with a metallic component.
yy Be careful with the installation of devices that may interfere with GPS reception (e.g. some wireless starters & alarms and MP3/CD players).
yy Do not use it simultaneously with other devices that use GPS signal.
yy Cloudy weather can interfere with GPS reception.
yy GPS reception can be poor in tunnels, underpasses, or streets with may
Skyscrapers or high rise buildings, and generating stations, military bases,
or broadcasting transmitters etc.
Checks for the microSD Card
Refer to the followings for trouble-free use of your microSD card.
yy It is recommended to format it once a week.
yy If the recorded video suffers from break-up, format the microSD card.
yy For stable function, format it with programs recommended by the SD card association. For more details, refer to the BlackVue website (www.blackvue.com).
yy Before formatting it, copy important files to other storage media to store
them.
yy Press the Wi-Fi button on the side for 10 seconds to format a microSD card
without using a PC.
yy Insert the formatted microSD card into the product so that the microSD
card is automatically initialized and the firmware is installed on it.
yy Insert or remove the microSD card only when the product is turned off.
yy microSD cards are a consumables and they are guaranteed for 6 months.
yy Other manufacturer's microSD cards can cause compatibility problems so it
is recommended to use a Pittasoft microSD card.
8
Product Features
Q
Ultra-high quality and smooth video
Full HD (1920x1080) 30-frame ultra-high quality video
High-class design with functionality
Simple, luxurious design in pearl black
Dedicated app support for BlackVue
Support for the BlackVue app for Android, iPhone, and tablets
with diverse configurations.
(Smartphone resolution support tablets)
Megapixel lens & 2M-pixel CMOS sensor
Clearer vision with high-resolution megapixel lens during both
day/night-time driving
VOD & real-time live view function
With built-in Wi-Fi and the BlackVue app, video can be played
regardless of place and time
(14
G-sensor & highly-sensitive GPS
Detailed driving record such as vehicle speed and recording location information can be checked with BlackVue software
High-quality wide-angle lens (156°)
Maximized viewing angle to record accurate video of any accident
DR500GW-HD
9
ul
w
Diverse recording options (Normal/Event/Parking)
Event recording and automatic conversion & deactivation of
parking mode
High-compression recording mode to extend SD-card life
Efficient memory usage with high-compression storage method
Support of viewer programs for Windows PC and Mac
BlackVue software with convenient configurations such as power
video search, resolution change, voice direction, and parking
mode
10
Package Components
BlackVue
Manual
Power Cord
Cable Clips (5 EA)
Double-sided Tape for the Mounting
Bracket (2 EA)
microSD Card
(Including BlackVue Software)
microSD Card Reader
Note
yy Pictures of the components may differ from the actual ones.
yy To enhance the performance of the product, components may be
changed without prior notice.
DR500GW-HD 11
Names of Each Part
Lock Button
Camera Lens
Mounting Bracket
Security LED
Recording LED
GPS LED
Wi-Fi LED
Speaker
Power Socket
microSD Card Slot
Cover
Voice on/off Button
12
Reset Button
Wi-Fi Button
(Format Button: Press for 10 seconds
for Formatting)
Note
yy Tap the Voice on/off button to turn the voice recording function on or
off.
yy Press the Wi-Fi button on the side for 10 seconds to format the microSD card without using a PC.
yy If you need to reset BlackVue, press the Reset button. It is
recommended for emergency use only.
How to Attach & Detach the Mounting Bracket
1
2
Pull the unit out of the mounting bracket with the LOCK button pressed.
Insert the unit into the mounting bracket until you hear clicking sound,
to attach it.
DR500GW-HD 13
How to Install the BlackVue
Checking Installation Position
1
It is recommended to install it at the back of rear view mirror. Clean any
foreign matter and moisture from the place where the product will be
installed.
Note
yy Do not install the product where it can interfere with the driver's vision.
How to Insert & Remove the microSD Card
1
2
3
14
Open the cover on the side of the product.
Insert the microSD card into the microSD card slot, as shown in the picture.
To remove the microSD card, press the microSD card once and then pull
it out. Make sure that the microSD card doesn't pop out while trying to
remove it.
Caution
yy Do not remove the microSD card while it is saving or reading data.
The data may be damaged or malfunction caused.
yy Copy important data to other storage media to store. Pittasoft Co.,
Ltd. will not be held responsible for data loss due to user negligence.
Note
yy Insert or remove the microSD card only when the product is turned
off.
yy microSD cards are consumables. Replace them after prolonged use.
Installation
1
2
3
Stop the engine where there is some light and in a safe place, and then
remove the key.
Attach the product to the windshield glass with the double-sided tape.
Set the camera lens to point directly forwards to the center when installing it. After installing the product, remove the lens cap.
Use the power cord to connect the DC IN of the product to car's power
socket.
Note
yy It is recommended to use Power Magic (the Battery Discharge Prevention Device) to record video while the car is parked.
yy To use the BlackVue at the same time as other equipment, purchase
and use a two-way adaptor.
DR500GW-HD 15
4
5
Use the cable clip to organize the power cord so that it doesn't interfere
with the driver's vision.
Adjust the lens angle of the camera.
Note
yy After adjusting the angle of the camera lens, remember the angle of
the mounting bracket so that it can be installed at the same angle
next time.
yy With smartphone and Wi-Fi connections, it is possible to adjust
the angle of the camera lens while watching real-time video. (22
Page)
6
Start the engine and check if the product works properly.
Caution
yy Do not remove the microSD card while it is saving or reading data.
The data may be damaged or malfunction caused.
Note
yy After a test drive, check if video was correctly recorded.
yy Recorded video is saved in the MP4 format.
16
Video Recording
Normal Recording
1
2
When the engine is started, the BlackVue is turned on automatically.
When the BlackVue is turned on, normal recording is automatically
started.
Note
yy If Power Magic (the Battery Discharge Prevention Device) is connected, the BlackVue is not turned off.
yy The normal recording function can be disabled in the BlackVue software configuration. (33 Page)
Parking Mode Recording
1
2
If the car doesn't move for 10 min or longer when in normal mode, it is
automatically converted to parking mode recording.
In parking mode recording, if movement or impact is detected by the
camera, video is recorded.
Note
yy To use parking mode recording while the engine is stopped, connect Power Magic (the Battery Discharge Prevention Device).
yy Automatic conversion function of parking mode recording can be
disabled in the BlackVue software configuration. (33 Page)
DR500GW-HD 17
Event Recording
1
2
If an impact is detected in normal or parking mode recording, event
recording is started.
It records video for 5 seconds before and 55 seconds after the impact.
Note
yy Sensitivity to impact can be adjusted in the BlackVue software configuration. (34 Page)
yy Event recording time can be adjusted in the BlackVue software
configuration. (33 Page) If you set the event recording time for 2
minute, it records video for 5 seconds before and 115 seconds after
the impact.
18
Simple Video Playback
How to Playback using a microSD Card
Playback Using a Smartphone
With a smartphone that supports microSD cards video can be played back.
1
Turn off the BlackVue and remove the microSD card.
Note
yy F or the details on how to remove the microSD card, refer to How to
Insert & Remove the microSD Card. (14 Page)
2
3
Insert the microSD card into the smartphone.
Open an application to play back recorded videos and select the
movie you want to play back.
Note
yy How to play back recorded videos may differ between smartphones,
so refer to your instruction manual for the details.
yy If there are many recorded videos in the microSD card, it may take a
long time to load the file.
yy Some smartphones don't support full HD video playback. For smartphones that support full HD video playback, refer to the BlackVue
website (www.blackvue.com).
yy With the BlackVue application, it's easy to play back videos and the
Live View function can be used. For details of the BlackVue application, refer to How to Playback using the BlackVue Application.
(22 Page)
DR500GW-HD 19
Watching with a GPS navigation
Recorded videos can be played back using a GPS navigation.
1
Insert the provided microSD card into a microSD card reader.
2
Connect the microSD card reader to the GPS navigation.
3
Open an application to play back recorded videos and select the movie
you want to play back from the removable drive.
Note
yy How to play back recorded videos may differ between navigators, so
refer to your instruction manual for the details.
yy If there are many recorded videos in the microSD card, it may take a
long time to load the file.
yy Some stanav don't support full HD video playback.
20
How to Playback using a PC
Recorded videos can be played back with a PC.
1
Insert the provided microSD card into a microSD card reader.
2
Connect the microSD card reader to the PC.
3
Open an application to play back recorded videos and select the movie
you want to play back from the removable drive.
Note
yy W
hen trying to play back a recorded video with a movie playback
program on a PC, install the H.264 and AAC audio codecs.
yy For how to play back using the BlackVue software, refer to Video
Playback. (27 Page)
DR500GW-HD 21
How to Playback using the BlackVue Application
1
Install the BlackVue application and open it in the smartphone. The
BlackVue application can be downloaded from the Google Play store
and Apple App Store.
Note
yy The BlackVue application can be used with Android 2.3 or later and
iOS 5.0 or later.
yy Depending on your smartphone, some of the BlackVue application
functions might not be supported.
2Press the Wi-Fi button on the side of the product, to turn on Wi-Fi.
3
22
Tap the Wi-Fi button in the BlackVue application. The Wi-Fi SSID is
'DR500GW-last 6-digit number of MAC Address' and MAC address
printed on the sticker attached to the back of the product box. (e.g.
DR500GW-A682DE). Select the device you want to connect and, enter
the password. Tap the OK button to connect it to the selected device.
Note
yy If you save the connection information when connecting using WiFi, you can tap the Wi-Fi button in the BlackVue application to connect it without turning on the Wi-Fi function of the smartphone.
yy The initial password is blackvue, but the user can change it.
yy For the Live View function, Wi-Fi can be used within a 10m range,
although the range may vary in some circumstances.
yy For playback of recorded videos using Wi-Fi, reception may vary according to the data transfer rate.
yy For details about how to configure Wi-Fi, refer to How to Configure
Wi-Fi etc. (36 Page)
4
Select the recorded video you want to play back.
Note
yy T ap the Live View button to check the video in real time.
yy If the Live View or VOD playback & copy function is used while it is connected via Wi-Fi and recording Full HD (1920x1080) @30fps, the recording frame is reduced to 20 fps.
DR500GW-HD 23
How to use the BlackVue Software
Installation & Execution
How to Install
Dedicated BlackVue software can be installed in a PC.
1
Insert the provided microSD card into a microSD card reader.
2
Connect the microSD card reader to the PC.
3
24
Execute the 'BlackVueSetup(HD).exe' file in the 'BlackVue\Software'
folder.
4
5
Install the program according the installation program instruction. When
the installation is finished, the BlackVue software icon is displayed on the
desktop.
Double-click the icon to execute the program.
Note
yy Only the English version of BlackVue software is available for Mac,
and the functions & screen may be different from the BlackVue
software for Windows.
How to Execute Without Installation
It is possible to execute the dedicated BlackVue program without installation.
1
Insert the provided microSD card into a microSD card reader.
2
Connect the microSD card reader to the PC.
3
Double-click 'BlackVue.exe' in the 'BlackVue\Application' folder.
DR500GW-HD 25
Screen Description
2
3
1
4
6
5
No.
Name
Description
1
Playback Screen
for Recorded
Videos
Videos can be played back using this screen. The
mouse can be used to zoom in/out.
2
G-Sensor
Information
G-sensor information can be checked, at the time
the video was recorded.
3
GPS Information
GPS information can be checked, at the time the
video was recorded.
Recorded Video
List
Using the file list and map tab, the recorded
video list, and where a video was recorded can be
checked.
: This is an normal recording file and marked
with green in the timeline.
: This is an event recording file and marked
with orange in the timeline.
: This is a parking mode recording file and
marked with blue in the timeline.
4
26
No.
Name
Description
5
Timeline
Video can be explored with the date, hr, min, and
sec of when a video was recorded.
6
Playback Option
Button
The playing-back window can be extended to full
screen and be reversed upside down. With the
playback control button, video playback, speed,
and volume can be controlled.
Video Playback
How to Control the Playback of Recorded Video
The recorded video can be played back in full screen mode and be reversed
upside down. The playback speed can be adjusted.
Frame Move (Previous)
Frame Move (Next)
Play Previous File
View Upside-Down
Full Screen View
Play Next File
Playback Speed Control
Playback/Pause Stop
Playback Time
Volume Control
Note
yy While a recorded video is played back, double-click the screen to
switch to full screen view. Double-click the screen again or press ESC
to return to default view.
yy While playing back a recorded video, use the mouse wheel to zoom
in/out.
yy While playing back a recorded video, right-click the screen to view
100 % zoom-in screen.
DR500GW-HD 27
Magnifying Glass
Some parts of a recorded video can be zoomed in while playing back.
Left-click the screen while a recorded video is being played back to see a partial
zoom-in window and to use it to identify the number plate of a car while moving it.
Note
yy BlackVue software for Mac will be upgraded to support the
magnifier function.
Timeline
Video can be explored with the date, hr, min, and sec of when a video was recorded.
Year Selection
Month Selection
Timeline for Hr Selection
Timeline for Min Selection
Timeline for Sec Selection
Note
yy In the date selection area, the date with a recorded video is marked
by a red circle and the currently-selected date is marked by a yellow
circle.
28
How to Manage Files
With the recorded video list, a file can be deleted or saved with a different
name.
1
2
3
4
5
Select a file from the recorded video list and right-click it.
To delete a file, click Delete.
To save it with different name, click Export and select the option you
want.
Press the OK button and select the file name you want, together with
the path.
Press the Save button to finish.
DR500GW-HD 29
How to Check the Map
Where a video was recorded can be checked with the map.
1
2
3
Select a file from the recorded video list and play it back.
Press the Map tab.
With the +/- button or mouse wheel, the map can be zoomed in/out.
Speed Unit Change
Map Type
Selection
Map ZoomIn/Out
Car Location
Note
yy To use the map service, an Internet connection is required.
yy Only for the recorded file with GPS information, the data can be
checked.
30
How to Check MyWay Viewer
The driving route of a recorded video can be checked.
1
2
3
Select a file from the recorded video list and play it back.
Press the
button. The driving route will be displayed on the map.
Double-click the map to play back the recorded video of the nearest
driving route from the clicked point.
Speed Unit Change
Latitude & Longitude
Car Location
Map Type
Select
Record
Starting
Point
Driving Route
Car Location
Currently-Played File
Note
yy To use the map service, an Internet connection is required.
yy Only for the recorded file with GPS information, the data can be
checked.
DR500GW-HD 31
How to Save as an Image
While playing back a recorded video, some parts can be saved as images if you
want.
1
2
Select a file from the recorded video list and play it back.
From the image to be saved, press the
button.
Note
yy Using the timeline or press the
images.
3
4
Press the G
/
button to explore detailed
button.
Select the file name you want, together with the path, and click the Save
button.
Note
yy JPG and BMP formats are supported for image files.
How to Print Out an Image
While playing back a recorded video, some parts can be printed out as images
if you want.
1
2
Select a file from the recorded video list and play it back.
From the image to be saved, press the
button.
Note
yy Using the timeline or press the
images.
3
4
32
Press the
/
button.
Select the printer and click the OK button.
button to explore detailed
Configuration
Basic Configuration
Time, video, and recording configurations can be changed.
1
2
Click the G
button and click the Basic tab.
After changing the configuration, click Save & Close.
1
3
2
No.
Function
Description
1
Time Zone
(Timezone
Configuration)
The time zone can be configured for where it is
used. The configured time zone is used as information for recorded video.
Image Setting
Quality, compression rates, and the brightness of
the recorded video can be configured. According to
the compression rate, recording time varies: for the
details, refer to the microSD card standard.
(41 Page)
Recording
Setting
Normal Record, Voice Record, Date and Time
Display and Auto Switching to Parking Mode
function can be turned on/off.
Speed Display and recording mode, Record File
Unit and Recording Storage Setting can be
changed.
2
3
DR500GW-HD 33
Note
yy With the normal recording function disabled, only event and
parking mode recording videos are saved.
yy With the speed display unit disabled, the vehicle speed is not displayed when the recorded videos are played back.
yy On microSD cards, older files are deleted first to mark space for
newly-recorded videos. Copy and store important files such as even
recording files to other storage media.
yy Tap the Voice on/off button to turn the voice recording function on
or off.
How to Configure Sensitivity
It is possible to configure the G-sensor sensitivity to start event recording during normal recording and the G-sensor & motion detection sensitivity to start
event recording during parking mode recording, respectively.
1
2
Click the G
button and click the Sensitivity tab.
After changing the configuration, click Save & Close.
Note
yy For details about advanced sensitivity configuration, refer to Advanced Configuration of Sensitivity. (35 Page)
1
2
34
No.
Function
Description
1
Sensitivity
for Normal
Recording
It is possible to configure the G-sensor sensitivity to
start event recording during normal recording.
2
Sensitivity for
Parking Mode
It is possible to configure the G-sensor and motion
detection sensitivity to start event recording during
parking mode recording.
Advanced Sensitivity Configuration
The sensitivity can be configured while watching a recorded video.
1
2
3
Click the G
button and click the Sensitivity tab.
Click the Advanced Setting button of the configuration you want.
Play back a recorded video. Saved G-sensor information is displayed at
the bottom of the recorded video which is played back.
DR500GW-HD 35
4
Move the control bar up/down to adjust the sensitivity range. If the
range is wide, it is less sensitive, and if the range is narrow, it is more sensitive.
It is recorded as an event.
It is not recorded as an event.
Note
yy If an event recording is started due to the sensitivity configured
while a recorded video is being played back, the edge of the playback screen blinks in orange.
5
After changing the configuration, click Save & Close.
Wi-Fi & Other Configuration
Configurations for Wi-Fi, LED indication, and voice direction can be changed.
1
2
36
No.
Function
Description
1
Wi-Fi Setting
With Login Setting, Wi-Fi access privilege can be
configured. SSID and password may be changed by
the user. The BlackVue application can be accessed
with the SSID and password chosen by the user.
2
Etc.
For video recording status, normal recording mode,
and parking mode recording, the LED indicators can
be turned on/off.
Voice direction item or the volume can be changed.
How to Apply Configuration
The user's configuration can be applied to the product.
1
2
Insert the microSD card into the product. For details on how to insert the
microSD card, refer to How to Insert & Remove the microSD Card.
(14 Page)
When the power is turned on, the user's configuration is automatically
applied.
Note
yy Insert the microSD card only when the product is turned off.
DR500GW-HD 37
Firmware Upgrade
Existing products can be upgraded by downloading a new version of the firmware.
1
2
3
Connect the microSD card to the PC. For details on how to connect, refer
to How to Playback using a PC. (21 Page)
Access the BlackVue website (www.blackvue.com) and download the
firmware upgrade file.
Double-click the firmware upgrade file to execute it and perform the
upgrade according to instructions provided in the program.
Note
yy After firmware upgrade, the user's configuration is initiated.
yy When the firmware upgrade is finished, the BlackVue software is
automatically installed. If you don't want it to be installed, click the
Cancel button.
38
4
After the firmware upgrade is finished, insert the microSD card into the
BlackVue.
Note
yy For detailes on how to insert the microSD card, refer to How to
Insert & Remove the microSD Card. (14 Page)
yy Insert the microSD card only when the product is turned off.
5
When the power is turned on, it is automatically upgraded.
Caution
yy Make sure that the power is never turned off while firmware upgrade is in progress.
DR500GW-HD 39
Product Specifications & Standards
Product Specifications
Model Name
Color/Size/Weight
Memory
Recording Mode
Camera
Viewing Angle
Resolution/Frame
Compression Mode
Wi-Fi
GPS
Microphone
Speaker
LED Indicators
Sensor
Button
Battery
Input Power
Current Consumption
DR500GW-HD
Pearl Black / Length 118.5mm x Diameter 36mm / 114g
microSD Card (16GB / 32GB)
Normal Recording, Event Recording (Impact Detection), and
Parking Mode Recording (Motion+Impact Detection)
❈ F or parking mode recording, a battery discharge prevention
device is required.
CMOS Sensor (Approx. 2M Pixel)
Opposite Angle 156°, Horizontal 123°, Vertical 90°
Full HD(1920x1080)@30fps, Full HD(1920x1080)@15fps,
HD(1280x720)@30fps, HD(1280x720)@15fps, D1(720x480)@30fps
❈ Resolution/frame can be changed
Video H.264 / Audio AAC-LC
❈ Baseline and High profile can be selected
Built-in (802.11b/g/n(2.4~2.4835GHz), Max150Mbps,
OFDM/CCK/16-QAM/64-QAM)
Built-in
Built-in
Built-in
❈ Voice Directions
Recording LED, GPS LED, Wi-Fi LED, Security LED
3-Axis Acceleration Sensor
Wi-Fi on/off Button
❈ Self-format Function: Press it for 10 seconds to format the
microSD card
Voice on/off Button
❈ T he proximity sensor is built-in so that voice recording
can be turned on/off by approaching it with a hand
❈ Touch the button or it recognizes when a hand approaches to within about 2 cm
Built-in Super Capacitor
DC 12V-24V
About 300 mA
❈ Varies depending on Wi-Fi usage
Operation Temperature -20°C ~ 70°C
KCC, FCC, CE, and RoHS
Certificates
Software
Application
40
BlackVue Viewer Program (Windows XP or later & Mac Leopard OS (10.5) or later)
BlackVue (Android 2.3 or later & iOS 5.0 or later)
LED Indicators
LED
State
Recording
(REC)
GPS
Boot-up
Recording
Wi-Fi
Security
Blinking
Orange
Blinking
White Blinking
Event
Red Blinking
Face White Blinking
Parking
Green Blinking
Normal
White Blinking
Wi-Fi ON
Light
Wi-Fi ON/OFF
Change
Blinking
GPS ON
White Blinking
Blue Light
Software Control
Available
White Blinking
Unavailable Unavailable
Available
microSD Card Standard
Image
Quality Full HD
Memory
1920x1080
Capacity
30fps
Normal Image Compression
Full HD
1920x1080
15fps
HD
HD
D1
1280x720
30fps
1280x720
15fps
720x480
30fps
16GB
4 HR 37 MIN 6 HR 54 MIN 6 HR 54 MIN 11 HR 29 MIN 17 HR 09 MIN
32GB
9 HR 24 MIN 13 HR 59 MIN 13 HR 59 MIN 22 HR 51 MIN 34 HR 09 MIN
Image
Quality
Full HD
Memory
1920x1080
Capacity
30fps
High Image Compression
Full HD
1920x1080
15fps
HD
1280x720
30fps
HD
1280x720
15fps
D1
720x480
30fps
16GB
7 HR 02 MIN 8 HR 49 MIN 8 HR 41 MIN 11 HR 31 MIN 17 HR 12 MIN
32GB
13 HR 55 MIN 17 HR 11 MIN 17 HR 10 MIN 23 HR 18 MIN 35 HR 48 MIN
Note
yy There may be some variation with actual recording time.
DR500GW-HD 41
Before Requesting A/S Service
It is required for users to back up important data regularly from
the storage device (to other separate media). Depending on the
situation, it will be necessary to delete the data from the internal
storage device (component). It might be necessary to delete all
the data from the product for A/S Service. So it is required for users to back up important data by themselves before requesting
A/S Service. For all A/S services, it is assumed that the user has
already backed up their data, so there is no additional back-up
process. Therefore, it is important to note that we will not be held
responsible for any data lost during A/S service.
FCC Compliance Information
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
Operation is subject to the following two conditions;
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
CAUTION : Changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
yy Reorient or relocate the receiving antenna.
yy Increase the separation between the equipment and receiver.
yy Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
yy Consult the dealer or an experienced radio/TV technician for
help.
Modifications not expressly approved by the manufacturer could
void the user's authority to operated the equipment under FCC
rules.
FCC ID: YCK-DR500GW-HD
Product Warranty
 The term of this product warranty is 1 year from the purchase date. (Accessories
such as Battery/microSD Card : 6 Months)
 We, Pittasoft Co., Ltd., provide the product warranty according to Consumer Dispute
Settlement Regulations (drawn up by the Fair Trade Commission). Pittasoft or designated
partners will provide the service upon request.
 If standard product is used for commercial purpose, the warranty term is reduced by half.
Product Name
(Model Name)
Serial No.
Purchased When
Purchased Where
Customer Information
Address / Call Number
Warranty
Consumer Injury
For serious repair required within 10 days of purchase
Exchange
For serious repair required within 1 month of exchange
Exchange/
Refund
For Defect
Repair
If Available
Refund
Repeated problem with the same defect (up to 3
times)
Paid Repair/
Paid Product
Exchange
Repeated problem with different parts (up
to 5 times)
When repair is unavailable due to lack of
spare parts within the component holding
period
Exchange/
Refund
Refund with
10% added to the
valuation of the
product taking
depreciation into
account
(Upper Limit:
Purchase Price)
Exchange/
Refund after
depreciation
When repair is unavailable even with spare
parts
1) Malfunction due to customer fault
- Malfunction & damage caused by user negligence (fall, shock, damage, unreasonable operation, etc) or careless use
- Malfunction & damage after the customer or a third party repaired
or modified the product.
- Malfunction & damage due to used of unauthorized components,
consumables, or separately sold parts
2) Other Cases
- Malfunction due to natural disasters (fire, flood, earthquake, etc)
- Expired life span of a consumable part
- Malfunction due to external reasons
N/A
Free Repair
For the loss of a product while in A/S
Repair
If Unavailable
Out of the Term
Exchange/
Refund
For serious repair required within 1 month of purchase
When not exchangeable
For performance/
functional
problems
under normal
use conditions
Within the
Term
Paid Repair
 This warranty is only valid in the country where you purchased the product.
Paid Repair
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising