DATASHEET FUJITSU ETERNUS LT20

DATASHEET FUJITSU ETERNUS LT20
DATASHEET FUJITSU ETERNUS LT20
DATASHEET
FUJITSU ETERNUS LT20
RELIABLE TAPE SOLUTION
The ETERNUS LT20 from Fujitsu is a highly reliable
tape library that is optimized to dramatically
reduce the risk of manual errors in remote
backups.
The system is equipped with LTO technology, the
synonym for high speed and very low media costs.
Depending on your individual requirements you
can either order it with an LTO-3, LTO-4 or LTO-5
half height drive, and can connect it to the server
via the SAS (Serial Attached SCSI) or Fibre Channel
interface.
LTO half height drives combine storage density
and tape library features into a compact 1U form
factor and offers up to 24 TB compressed storage
capacity when equipped with eight LTO-5
cartridges.
Page 1 / 4
Since the ETERNUS LT20 automatically moves the
cartridges from the slots to the drive for backup
and returns them after backup is complete, you do
not have to worry about changing cartridges
manually any more.
The ETERNUS LT20 uses the most current, futureproof standard for high data transfer rates and
uninterruptible transmission.
And like all products from Fujitsu designed for
small and medium sized businesses, the ETERNUS
LT20 is reliable, easy to use and very affordable.
http://ts.fujitsu.com/eternus_lt
DATASHEET FUJITSU ETERNUS LT20
FEATURES AND BENEFITS
MAIN FEATURES
BENEFITS
 Ultra-compact product with up to 8 tape slots and one LTO drive in
a single height unit
 Up to 24 TB (compressed LTO-5) in 1 U
 Backup of up to 1000 GB (compressed) data in one hour
 LTO-3 / LTO-4 / LTO-5 HH SAS technology
 Future-proof, fault-tolerant, robust
 High data throughput
 LTO-4 / LTO-5 HH drive with optional Fibre Channel interface
 Cheaper than full height drives
MANY EXTRAS AT NO EXTRA COST:
 Mail slot
 Easy input and output of individual cartridge
 Barcode reader
 Simplified media management
 Shorter restoration times
 Remote management utility and user friendly operator panel
 Easy administration, enables configuration and diagnostic
 Automatism help to decrease the error rate of backup processes
 Ethernet network for Firmware upgrades, statistics
Page 2 / 4
http://ts.fujitsu.com/eternus_lt
DATASHEET FUJITSU ETERNUS LT20
TECHNICAL DETAILS
GENERAL SPECIFICATION
Type
Interface
LTO-3 HH
LTO-4 HH
LTO-5 HH
SAS
SAS / Fibre Channel
SAS / Fibre Channel
Total capacity native
3.2 TB
6.4 TB
12 TB
Total capacity compressed*
6.4 TB
12.8 TB
24 TB
8
8
8
No. of slots
No. of MTC drives
1
1
1
216 / 432 GB/hr
288 / 576 GB/hr
504 / 1008 GB/hr
LTO-3
LTO-4
LTO-5
60 / 120 MB/s
80 / 160 MB/s
140 / 280 MB/s
27 - 60 MB/s
33 - 180 MB/s
40 - 140 MB/s
Cartridge loading time
< 19 s
< 19 s
< 19 s
Buffer size
64 MB
128 MB
256 MB
Max. data throughput native/compressed*
DRIVES
Drive type - HH (half height)
Write/read speed
at write/read head*
Variable speed recording**
Data compression factor*
Recording format
Maximum data rate (interface)
2
2
2
Multiple Track linear
Multiple Track linear
Multiple Track linear
3 Gbit/s
3 Gbit/s / 4 Gbit/s
6 Gbit/s / 8 Gbit/s
PROCESSES DATA VOLUMES
LTO-1
Read
-
-
LTO-2
Write / Read
Read
-
Write / Read
Write / Read
Read
Write Once / Read Many
Write Once / Read Multiple
Read
LTO-3
LTO-3 WORM
LTO-4
-
Write / Read
Write / Read
LTO-4 WORM
-
Write Once / Read Multiple
Write Once / Read Multiple
LTO-5
-
-
Write / Read
LTO-5 WORM
-
-
Write Once / Read Multiple
CARTRIDGE DATA VOLUMES
LTO-1 (native / compressed*)
100 / 200 GB
-
-
LTO-2 (native / compressed*)
200 / 400 GB
200 / 400 GB
-
LTO-3 (native / compressed*)
400 / 800 GB
400 / 800 GB
400 / 800 GB
LTO-3 WORM (native / compressed*)
-
400 / 800 GB
400 / 800 GB
LTO-4 (native / compressed*)
-
800 / 1600 GB
800 / 1600 GB
LTO-4 WORM (native / compressed*)
-
800 / 1600 GB
800 / 1600 GB
LTO-5 (native / compressed*)
-
-
1500 / 3000 GB
LTO-5 WORM (native / compressed*)
Bandwidth
*Note
-
**Note
DIMENSIONS / WEIGHT
Height x width x depth
Rack installation height
Max. weight, w/o cartridges
Page 3 / 4
1500 / 3000 GB
½ inch
As used for storage capacity, one gigabyte (GB) = one billion bytes,
and one terabyte (TB) = one trillion bytes.
Assuming a compression factor of 2
(The compression factor depends on the data structure and is typically 2 or less.)
Uncompressed at nominal capacity.
43,75 x 447,5 x 805 mm
1U
14 kg
http://ts.fujitsu.com/eternus_lt
DATASHEET FUJITSU ETERNUS LT20
ELECTRICAL SPECIFICATIONS
Power voltage
Power frequency
85 - 264 V (± 5%)
50/60 Hz (± 5%)
Typical power consumption (Watt)
Switched OFF mode
3.5 W
Unit ready (no tape loaded into drive)
Write/read data no robotic moves
Write/read data with robotic moves
Note
32 W
48 W
55 W
LTO-5 drive consumes almost 36% less in standby mode and 10% less in operation mode
CLIMATIC CONDITIONS
Operating range
Temperature
10 - 35 °C
Rel. humidity
COMPLIANCE
Product safety
Electromagnetic compatibility
Environmental compliance
MAINTENANCE AND SUPPORT SERVICES.
Recommended service level
Available service level
Important note
20 - 80 %
EN55022Class A, EN55024, EN61000-3-2, EN61000-3-3
CE-Conformity, CB-Certificate, ETLc/us
RoHS compliant, WEEE compliant
24x7 Onsite Service with 4h Response Time
ts.fujitsu.com/services/maintenance_support/hardware_services.html
For use with the MTC changers, only cartridges certified by Fujitsu with the label “Fujitsu Preferred Quality” are permitted.
This product and the accessories (components/materials) released for it by Fujitsu comply with
the protection targets of Emission Class A. In special cases, measures for reducing the
electromagnetic interference on other devices may be necessary.
FUJITSU PLATFORM SOLUTIONS
MORE INFORMATION
COPYRIGHT
In addition to Fujitsu ETERNUS LT20, Fujitsu
provides a range of platform solutions. They
combine reliable Fujitsu products with the
best in services, know-how and worldwide
partnerships.
Learn more about Fujitsu ETERNUS LT20,
please contact your Fujitsu sales
representative or Fujitsu Business partner,
or visit our website.
http://ts.fujitsu.com/eternus_lt
All rights reserved, including intellectual
property rights. Changes to technical data
reserved. Delivery subject to availability.
Any liability that the data and illustrations are
complete, actual or correct is excluded.
Designations may be trademarks and/or
copyrights of the respective manufacturer,
the use of which by third parties for their own
purposes may infringe the rights of such
owner.
For further information see
http://ts.fujitsu.com/terms_of_use.html
Copyright © Fujitsu Technology Solutions
DISCLAIMER
Dynamic Infrastructures
With the Fujitsu Dynamic Infrastructures
approach, Fujitsu offers a full portfolio of IT
products, solutions and services, ranging
from clients to datacenter solutions, Managed
Infrastructure and Infrastructure as-aService.
How much you benefit from Fujitsu
technologies and services depends on the
level of cooperation you choose. This takes IT
flexibility and efficiency to the next level.
Computing Products
http://fujitsu.com/global/services/computing/
Software
http://fujitsu.com/software/
FUJITSU GREEN POLICY INNOVATION
Fujitsu Green Policy Innovation is our
worldwide project for reducing burdens on
the environment. Using our global know-how,
we aim to resolve issues of environmental
energy efficiency through IT. Please find
further information at http://fujitsu.com/
global/about/environment/
Technical data are subject to modification
and delivery subject to availability. Any
liability that the data and illustrations are
complete, actual or correct is excluded.
Designations may be trademarks and/or
copyrights of the respective manufacturer,
the use of which by third parties for their own
purposes may infringe the rights of such
owner.
CONTACT
FUJITSU Technology Solutions
Email: storage-pm@ts.fujitsu.com
Website: http://ts.fujitsu.com/eternus_lt
2010-12-01 CE-EN
Page 4 / 4
http://ts.fujitsu.com/eternus_lt
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising