Articulated Tandem Rollers AV 70 X / 110 X / 120 X / 130 X

Articulated Tandem Rollers AV 70 X / 110 X / 120 X / 130 X
Machines
Articulated Tandem Rollers
AV 70 X / 110 X / 120 X / 130 X
www.ammann-group.com
Innovative technology of the articulated
Tandem Roller AV X
The AV articulated Tandem Roller focuses on a high compaction performance
and high standards for the drivers comfort and safety. The concept combines
easy operation with long service intervals.
The Ammann tandem rollers of the AV X line were developed for the demand of today’s road building
projects worldwide to compact asphalt sub-layers, wearing course and next to gravel and soils. The striking
design provides a masterful visual reflection of the rollers combination of high compaction and driver’s
comfort.
AV 70 X / 110 X / 120 X and AV 130 X are based on two frames connected by double joint enabling a crabsteering of 160 mm (180 mm) both sides. The driver controls the roller from an ergonomic designed
panoramatic cab on the front frame. The concept offers excellent visibility to the sprinkler system, drum
surface and edges as well as all-round visibility to the whole working area.
The heavy AVX line has a unique drive propulsion system. The power train is situated in the rear frame.
Independent pumps for drive and vibration secure an optimal traction and compaction force of the roller.
Excellent compaction results are achieved by optimal combination of drum dimensions, frequencies and
amplitudes.
The light roller of 7 ton weight use minimal turning radius to a great extent. It is because this machine is
used in medium to small job sites where higher manoeuvrability is required. High reliable and efficient
Tier 3 engines provides sufficient power and highest reliability.
2
Cab
Drums
• Integrated ROPS/FOPS
• Ventilation and heating
• Excellent view to the drum surface, edges and
sprinkling system
• One-seat working place: swivelling and sliding
within the entire width of the cab
• Adjustable steering wheel for ultimate driver’s
comfort
• Two drive levers for easy hands operation at
both side of cab and adjustable seat
• Two amplitudes and two frequencies for
optimal compaction of the different job sites
applications
• Balanced Drums dimensions minimize the risk
of asphalt waves
• Reliable long-life vibration system
• Back-up sprinkling system by use of two water
pumps
• Large water tanks for long filling intervals
Service and Maintenance
Drive and control
• Excellent access to the engine service points
by wide hoods
• All control and lubrication ports reachable
from the ground
• Cabine isolated against heat and vibration
• Best access to the sprinkling nozzles
• Double pump system drives both drums
independently (AV 110 X / AV 120 X / AV 130 X)
• Excellent traction even in difficult terrains
• Double joint enabling crab-steering of
160 (180) mm both sides
• Unique manoeuvrability achieved by
a large steering angle and general machine
compactness
3
Ergonomics:
Two drive levers for easy hands
operation at both sides of cab
Visibility
Excellent visibility to surface and
edges of both drums
Good access of sprinkling system
Best all-around view 1m x 1m
Articulated point
Double joint articulation point
Crab mode possible
Perfect manoeuvrability
AV 70 X / 110 X / 120 X / 130 X
Articulated Tandem Rollers
Visibility:
Open view over both drums
and sprinkling
Practicality:
Fast-tilting scrapers are
optional
Cab
Roomy well glassed cab
Maximal operator‘s comfort
Optimal layout of all controllers
Well-arranged dashboard
Driver’s working place
Sliding and swivelling seat within
the comfort cabin
Safe ROPS/FOPS – protection
Two drive levers
Adjustable steering wheel and seat
ACE Force compaction meter
Propulsion
Powerful reliable engine
Pair of independent pumps for
motion and vibration
Low fuel consumption
Long maintenance and service
intervals
Drum
Optimalized parameters of the
vibration
Drum size prevent undulation of
compacting material
Reliable construction arrangement
of exciter mechanism
Technical data and specifications
AV 70 X
AV 110 X
kg
mm
mm
7720
1450
180
10 990
1700
160
Weights
Operating weight (CECE)
Front drum load (CECE)
Rear drum load (CECE)
Front drum linear load
Rear drum linear load
kg
kg
kg
kg/cm
kg/cm
7360
3750
3610
27,50
25,70
10 400
5250
5150
30.9
30.3
Steering
Steering angle (+ -)
Oscillation angle (+ -)
Turning radius inner (edge)
Transversal stability - straight
°
°
mm
°
34
8
4600
32
34
6
4650
30
Riding characteristic
Maximal speed
Gradeability without vibration
Gradeability with vibration
km/h
%
%
10
30
30
11
30
30
Capacity
Operating weight maximum
Compacting width
Drum offset
Brakes
Operation
Parking
Emergency
Hydrostatic
Multidisc
Multidisc
Vibration
Amplitudes
Frequencies
Centrifugal forces
mm
Hz
kN
0.6 / 0.33
43 / 52
55 / 65
Watering
Watering
No. of pumps
Water filtration stages
0.7 / 0.35
45 / 55
110 / 83
Pressure
2
3
Pressure
2
3
Capacities
Fuel
Water
lt
lt
110
600
208
1000
Electrical Installation
Voltage
Capacity of batteries
V
Ah
12
100
12
135
Engine
Make
Type
Rated power
Standard
Cummins
BTAA 3.3 - C80
60
ISO 3046/1 (DIN6271)
kW
Cummins
QSB3.3-C99
74
ISO 3046/1 (DIN6271)
Dimensions (mm)
A
D
G
H
H1
H2
L
T
W
W1
W2
AV 70 X
3260
1150
240
3005
2300
755
4410
15
1450
1550
45
AV 110 X
3460
1300
310
3020
2350
760
4760
22
1700
1822
61
AV 120 X
3480
1500
290
3025
2350
760
4760
21
1880
2002
61
AV 130 X
3525
1350
335
3060
2390
785
4875
20
2100
2222
60
Technical data subject to change without notice. Illustrations may show optional equipment.
6
Hydrostatic
Multidisc
Multidisc
AV 120 X
AV 130 X
11 730
1880
160
13 670
2100
160
11 140
5550
5590
29,2
28,9
13 080
6610
6470
31.5
30.8
34
6
4560
30
34
6
4670
30
11
30
30
11.4
40
30
Hydrostatic
Multidisc
Multidisc
Hydrostatic
Multidisc
Multidisc
0,7 / 0,35
45 / 55
116 / 86
0.8 / 0.4
42 / 55
135 / 116
Pressure
2
3
Pressure
2
3
208
1000
210
1000
12
135
12
135
Cummins
QSB3.3-C99
74
ISO 3046/1 (DIN6271)
Cummins
QSB4.5-C130
97
ISO 3046/1 (DIN6271)
Standard items
• Engine TIER 3
• ROPS/FOPS cab with sliding
and rotating driver seat
• Ventilated+heated
• Adjustable steering wheel
• Speed pre-selector
• 2 mode vibratory system
• Hydrostatic propulsion,
front+rear
• Working lights + turning
indicators and back up lights
• Sprinkling system
• Back-up alarm
• Vulkolan scrapers
• Inter axle dif. lock
Optional items
• CE kit
• Open platform with rails +
vandal cover
• ROPS frame onto platform
• Canvas canopy (black, yelow),
mounted on ROPS frame
• Canvas canopy (black, yelow)
• Air conditioning
• Radio with MP3 player
• Edge cutter + press wheel
• Thermometer
• Backing horn
• Additional working lights on
cab 2+2
• Tiltable scrapers
• Warning beacon
• Back-up alarm
• Tools kit
• First service kit
• Fire extinguisher
• Add. documentation set
• Customer color
• ACE Force compaction meter
7
Ammann manufacturing companies
Ammann distribution companies
Germany
Ammann Verdichtung GmbH
D-53773 Hennef
Tel +49 22 42 880 20
Fax+49 22 42 88 02 59
info.avd@ammann-group.com
South Africa
Ammann Construction Machinery
South Africa
229 Hull Road, Rynfiel, Benoni
Tel +27 11 849 3939
Fax+27 11 849 8889
Switzerland
Ammann Schweiz AG
CH-4901 Langenthal
Tel +41 62 916 61 61
Fax+41 62 916 64 03
info.aag@ammann-group.com
France
Ammann France SAS
F-94046 Créteil/Cedex
Tel +33 1 45 17 08 88
Fax+33 1 45 17 08 90
info.afr@ammann-group.com
United Arab Emirates
Ammann NME / Dubai
Dubai
Tel +971 4 299 14 49 | 7
Fax+971 4 299 14 49
info.nme@ammann-group.com
Germany
Ammann Verdichtung GmbH
D-53773 Hennef
Tel +49 22 42 880 20
Fax+49 22 42 88 02 59
info.avd@ammann-group.com
United Kingdom
Ammann Equipment Ltd.
Bearley Stratford upon Avon
GB-Warwickshire, CV37 8XY
Tel +44 1789 414 525
Fax+44 1789 414 495
info.ael@ammann-group.com
USA
Ammann America Inc.
Ponte Vedra, Florida 32082, USA
Tel +1 904 543 1691
Fax+1 888 266 1210
info.aaa@ammann-group.com
Russia
Ammann Russland o.o.o.
RU-129343 Moscow
Tel +7 495 933 35 61
Fax+7 495 933 35 67
info.aru@ammann-group.com
Brasil
Ammann do Brasil
Gravataí -RS- Brasil 94180 – 452
Tel +55 51 9315 3099
info.abr@ammann-group.com
International Distribution Partners: www.ammann-group.com
03 / 2013
Technical paramenters are subject to change
Czech Republic
Ammann Czech Republic a.s.
CZ-54901 Nové Město nad Metují
Tel +420 491 476 111
Fax+420 491 470 405
info.acz@ammann-group.com
Ammann Spare Parts
Tel +41 62 916 66 66
Fax+41 62 916 6804
spareparts.machines@ammann-group.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising