homecast em1150.cdr - Kristal Electronics
Digital Terrestrial Receiver
Small, Fast and Reliable
Homecast eM1150
High quality Standard Definition Digital Terrestrial Receiver
» SPDIF Optical Digital Out
» Digital Tuner with loop through
» Fully featured Onscreen Display menu
» MPEG-2 Digital & Fully DVB Complaint
» Built in Modulator supporting PAL signals
» Variable aspect ratios: 4:3, 16:9 and letterbox
» Capacity to store 2000 Free to air channels
» Teletext and subtitles supported
» EPG (Electronic Program Guide) for
onscreen channel information
» Favorite channel list
Digital Video
Back Panel Design
RF Input
Frequency 160 ~ 860 MHz
Loop Through 51 ~ 860 MHz
Bandwidth 7MHz
Connector IEC-Female
Demodulator IEC-Female
FFT mode 2K,8K
Constellation QPSK,16QAM,64QAM
Guard Interval 1/4,1/8,1/16,1/32
Inner Coding Rate 1/2,2/3,3/4,5/6,7/8
Video Output
Formats MP@ML
Aspect Ratio 4:3 , 16:9
Picture Resolution 720 ×576 , 720 ×480
Output System NTSC/PAL
Connector RCA/SCART
Composite out via RCA and Scart
RGB out via Scart
Supports Teletext via OSD and
Vertical block insertion
Supports EPG
Full channel edit features
256 colour menus
General Data
Operating Temperature: 5 ~ 40
Storage Temperature: 4 ~ 65
RF Modulator
Channel Ch.21~69
Return Loss 3 dB max.75 Ohms
Audio Mono
Connector IEC (Female-type)
Bypass Bandwidth 45~862MHz
Rs232 port for software upgrade
Power Supply
Input Voltage: 90 ~ 240 VAC 50 ~ 60 Hz
Consumption: (Max.) 25 W
W ×D ×H (mm) 280 x 220 x 60
Weight (Kg) 2.1Kg
Audio Output
Formats MPEG (Layer1&2)
Sample Rate 32/44.1/48 KHz
Mode Mono/Stereo/Dual
Connector RCA/SCART
TOSLINK optical output
1xRemote control and batteries
1xA/V RCA Cable
1xUser’s Manual
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF