VPort 36-1MP Series - Allied Automation, Inc.

VPort 36-1MP Series - Allied Automation, Inc.
VPort 36-1MP Series
Quick Installation Guide
Third Edition, October 2013
 2013 Moxa Inc. All rights reserved.
P/N: 1802000360011
Overview
The VPort 36-1MP Series is the world’s first rugged IP camera that can
withstand environmental temperatures ranging from -40 to 75°C without
a heater or fan. It is an industrial-grade, H.264 box-type IP camera that
combines HD resolution (1280 x 720), advanced IVA (Intelligent Video
Analysis) technology, and de-mist technology to enhance surveillance
system efficiency while delivering state-of-the art video quality. Optional
housing and PT scanner accessories are available for indoor and outdoor
installation.
The VPort 36-1MP Series is designed to be compatible with C/CS mount
lenses to meet any viewing angle and distance requirement. With a
built-in removable IR-cut filter and automatic color mode switching, the
VPort 36-1MP Series is suitable for day-and-night use. Highly-tuned ROI
(Region of Interest), BLC (Black Level Control), and WDR (Wide Dynamic
Range) functions enable the VPort 36-1MP Series to produce
exceptionally clear images. The VPort 36-1MP Series can encode analog
video into both H.264 and MJPEG video streams and can transmit up to 3
independent video streams (2 in H.264, and 1 in MJPEG) simultaneously.
Advanced video encoding technology enables the camera to support up to
30 fps for each of the H.264 and MJPEG streams.
Package Checklist
Moxa’s VPort 36-1MP Series is shipped with the following items. If any of
these items is missing or damaged, please contact your customer service
representative for assistance.
• 1 VPort 36-1MP series camera (one of models below)
Model Name
Description
VPort 36-1MP
VPort 36-1MP, POE, 0 to 60°C operating
temperature
VPort 36-1MP-T
VPort 36-1MP, POE, -40 to 75°C operating
temperature
VPort 36-1MP-IVA
VPort 36-1MP, POE, 0 to 60°C operating
temperature, 1 IVA license
VPort 36-1MP-IVA-T VPort 36-1MP, POE, -40 to 75°C operating
temperature, 1 IVA license
VPort 36-1MP-DM
VPort 36-1MP, POE, 0 to 60°C operating
temperature, de-mist function
• Screw handle accessory package
Inner hexagon
C/CS mount adapter ring 5-pin terminal block
screwdriver for
for DI and relay
tightening/ loosening
lens holder
-2-
3-pin terminal block
for power input
•
•
•
2-pin terminal block for
RS-485 DX+ and DX-
Quick installation guide
Documentation & software CD (includes User’s Manual, Quick
Installation Guide, and VPort Utility)
Warranty card
NOTE Check the model name on the VPort’s side label to determine if
the model name is correct for your order.
NOTE This product must be installed in compliance with your local laws
and regulations.
Features
Sensor: 1/2.7” HD progressive scan CMOS
Lens: C/CS mount lens (lens not included)
Auto Iris Type: DC drive
Illumination (low light sensitvity):
• Color: 0.2 lux at F1.2
• B/W: 0.05 lux at F1.2
Synchronization: Internal
Gamma Correction: 0.45 or 1.0 (default 0.45)
White Balance: ATW/AWB (range: 3200 to 10000°K)
Dynamic Range: Color: 100 dB; B/W: 110 dB
Auto Electronic Shutter: 1/30 to 1/25000 sec.
Electronic Shutter: 1/50, 1/100, 1/250, 1/500, 1/1000, 1/2000,
1/4000, 1/10000 sec.
S/N Ratio: 50 dB (Gamma, Aperture, AGC OFF; DNR ON)
ICR Control: Auto (light sensor control) or DI control
DNR: Built-in DNR
WDR: Level 1-8/Off
AGC Control: On/Off
Flickerless Control: On/Off
Auto Exposure: On/Off
Image Rotation: Flip, Mirror, and 180° rotation
Image Setting: Manual tuning for brightness, saturation, contrast, and
sharpness
Video Compression: H.264 (ISO/IEC 14496-10) or MJPEG
Video Outputs: Ethernet
Video Streams: Up to 3 video streams (2 x H.264 and 1 x MJPEG)
• Stream 1: H.264, 1280 x 720 resolution (max.)
• Stream 2: H.264, 720 x 480 resolution (max.)
• Stream 3: MJPEG, 720 x 480 resolution (max.)
Note: Streams 2 and 3 must be at the same resolution
Video Motion Detection: 3 independently configurable motion areas
Scheduling: Daily repeat timing schedule
Imaging: JPEG snapshots for pre/trigger/post alarm images
-3-
Video Recording: Event recording stored on the SD card
Email/FTP Messaging: Automatic transfer of stored images via email or
FTP when alerted
Custom Alarms: HTTP event servers for setting customized alarm
actions
Pre-alarm Buffer: 24 MB video buffer for JPEG snapshot images
Advance Software Features:
• DynaStream™ for automatic adjustment of frame rate
• 3 privacy mask areas provided
• ROI (Region of Interest) configuration for up to 3 areas
Safety: UL 60950-1, EN 50121-4, NEMA TS2, Class 1 Division 2
(Pending), Atex Zone 2 (Pending)
EMI: FCC Part 15, CISPR (EN 55022) class A
EMS: EN 61000-4-2 (ESD), Level 3 EN 61000-4-3 (RS), Level 3 EN
61000-4-4 (EFT), Level 3 EN 61000-4-5 (Surge), Level 3 EN 61000-4-6
(CS), Level 3 EN 61000-4-8, EN 61000-4-11
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Warranty: 5 years
Product Description
Top View
Bottom View
NOTE The product is shipped with the mounting bracket fastened to the
bottom of the camera. However, the bracket can be removed and
repositioned to the top of the camera, depending on your
deployment requirements.
-4-
•
Auto Iris Socket: Plug the auto-iris cable from camera lens into this
socket to use the auto-iris function.
Lens Holder: The lens holder is designed for CS mount lenses; a C/CS
adaptor must be used to mount C lenses. For details, see the HW
installation section of this manual.
SD Card Slot: Remove the SD card slot cover and insert an SD card
for disconnection/event local storage.
Mounting Bracket Screw Holes: For fastening mounting brackets.
Reset Button: Use a pointed object to push in the reset button to
reboot. Push and hold the button until the system reboots to restore
factory defaults.
•
•
•
•
Back Panel View
1.
2.
3.
4.
5.
6.
7.
5-pin terminal block for DI and relay connection
2-pin terminal block for RS-485 pin connection
RJ45 port for PoE/non-PoE connection
Ground screw for connecting a grounding wire
3-pin terminal block for power input
LED indicator to show network and system status. Green indicates
normal operation.
LED indicator to show power status. Green indicates normal
operation.
NOTE The VPort 36-1MP can be powered by a 12-32 VDC or 18-30 VAC
power input, or Power over Ethernet (PoE, 802.3af). For power
redundancy, use DC or AC power together with PoE.
-5-
Hardware Installation
Step 1: Remove the lens cover.
Step 2: Loosen the lens holder screw with the torx screwdriver.
Step 3: Remove the lens holder.
NOTE Be sure to loosen the screw affixing the lens holder in step 2
before trying to remove the lens holder. The lens holder may be
too tight to loosen if the screw is not loosened first.
-6-
Step 4: Screw the lens holder to the lens you are going to use.
Groove
NOTE Be sure to screw the lens holder to the lens on the right side. The
side of the lens holder with the groove should be facing the lens;
the side without the groove should be facing outwards.
Step 5: Screw the lens and lens holder to the VPort 36-1MP.
NOTE We strongly suggest that you perform this step while viewing live
video from the camera via a web browser for instant feedback on
when to stop. Be sure not to tighten the screw all the way, or the
lens holder may remain fixed to the camera when you remove the
lens.
NOTE You can tighten the lens holder screw (see Step 2) to fix the
position of the lens holder and lens.
NOTE You do not need to use the C/CS mount adaptor ring if you are
using the VPort 36-1MP series with an optional lens purchased
from Moxa. It is only required to mount the lens with the adaptor
ring if you are using a C mount type lens.
Step 6: Power on your VPort 36-1MP.
NOTE The VPort 36-1MP can be powered by a 12-32 VDC or 18-30 VAC
power input, or Power over Ethernet (PoE, 802.3af). For power
redundancy, use DC or AC power together with PoE.
Software Installation
Step 1: Configure the VPort 36-1MP’s IP address.
When the VPort 36-1MP is first powered on, the POST (Power On Self Test)
will run for a few moments (about 30 seconds). The network environment
determines how the IP address is assigned.
Network Environment with DHCP Server
For this network environment, the unit’s IP address will be assigned by
the network’s DHCP server. Refer to the DHCP server’s IP address table to
determine the unit’s assigned IP address. You may also use the Moxa
VPort and EtherDevice Configurator Utility (edscfgui.exe), as described
below:
-7-
Using the Moxa VPort and EtherDevice Configurator Utility
(edscfgui.exe)
Run the edscfgui.exe program to search for the VPort. After the utility’s
window opens, you may also click on the Search button
to initiate a
search.
When the search has been completed, the Model Name, MAC address, IP
address, serial port, and HTTP port of the VPort will be listed in the utility’s
window.
You can double click the selected VPort, or use the IE web browser to
access the VPort’s web-based manager (web server).
Non DHCP Server Network Environments
If your VPort 36-1MP is connected to a network that does not have a
DHCP server, then you will need to configure the IP address manually.
The default IP address of the VPort 36-1MP is 192.168.127.100 and the
default subnet mask is 255.255.255.0. Note that you may need to change
your computer’s IP address and subnet mask so that the computer is on
the same subnet as the VPort.
To change the IP address of the VPort manually, access the VPort’s web
server, and then navigate to the System Configuration  Network 
General page to configure the IP address and other network settings.
Check the Use fixed IP address to ensure that the IP address you
assign is not deleted each time the VPort is restarted.
Step 2: Access the VPort 36-1MP’s web-based manager
Type the IP address in the web browser’s address input box and then
press enter.
Step 3: Install the ActiveX Control Plug-in
A security warning message will appear the first time you access the
VPort’s web-based manager. The message is related to installing the
VPort AcitveX Control component on your PC or notebook. Click Yes to
install this plug-in to enable the IE web browser for viewing video images.
-8-
NOTE For Windows XP SP2 or above operating systems, the ActiveX
Control component will be blocked for system security reasons.
In this case, the VPort’s security warning message window may
not appear. Users should unlock the ActiveX control blocked
function or disable the security configuration to enable the
installation of the VPort’s ActiveX Control component.
Step 4: Access the homepage of the VPort 36-1MP’s
web-based manager.
After installing the ActiveX Control component, the homepage of the
VPort 36-1MP’s web-based manager will appear. Check the following
items to make sure the system was installed properly:
1.
2.
Video Images
Video Information
Step 5: Access the VPort’s system configuration.
To change the configuration, click System Configuration to view the
system configuration overview page. Model Name, Server Name, IP
Address, MAC Address, and Firmware Version appear on the green
bar near the top of the page. Use this information to check the system
information and installation.
For configuration details, check the User’s Manual on the software CD.
-9-
Wiring Requirements
Safety First!
• Be sure to disconnect the power cord before installing and/or
wiring your Moxa VPort 36-1MP.
• Calculate the maximum possible current in each power wire
and common wire, and observe all electrical codes dictating
the maximum current allowable for each wire size.
• If the current exceeds the maximum ratings, the wiring could
overheat, resulting in serious damage to your equipment.
You should also pay attention to the following:
•
•
•
•
Use separate paths to route wiring for power and devices. If power
wiring and device wiring paths must cross, make sure the wires are
perpendicular at the intersection point.
You can use the type of signal transmitted through a wire to
determine which wires should be kept separate. The rule of thumb is
that wiring that shares similar electrical characteristics can be
bundled together.
Keep input wiring and output wiring separated.
We strongly advise labeling the wiring to all devices in the system.
Specifications
Camera
Sensor
Lens
Auto Iris Type
Illumination
1/2.7” HD progressive scan CMOS
C/CS mount lens
DC drive (lens not included with product)
Color: 0.2 lux at F1.2
B/W: 0.05 lux at F1.2
Synchronization
Internal
White Balance
ATW/AWB (range: 3200 to 10000 ºK)
Wide Dynamic
Color: 100 dB
Range
B/W: 110 dB
Electronic Shutter AES: 1/30 to 1/25,000 sec
Fixed: 1/50, 1/100, 1/250, 1/500, 1/1000, 1/2000,
1/4000, 1/10000 sec
Gamma Correction 0.45 or 1.0 (default is 0.45)
S/N Ratio
50 dB (Gamma, Aperture, AGC OFF, DNR ON)
ICR control
Auto (light sensor control) or DI control
DNR
Built-in
WDR
On/Off
AGC Control
On/Off
Flickerless Control On/Off
Backlight
On/Off
Compensation
Auto Exposure
On/Off
Image Rotation
Flip, Mirror, and 180° rotation
Image Setting
Manual tuning of brightness, saturation, contrast,
and sharpness
- 10 -
Video
Video Compression
Video Output
Video Streams
Video Resolution
and FPS
Video Viewing
PTZ
Network
Protocols
Ethernet
Standard
Local Storage
SD socket
GPIO
Digital input
Relay output
Serial Interface
RS-485
LED Indicators
STAT
Network
Power
Power
Input
H.264 (ISO/IEC 14496-10) or MJPEG
Via Ethernet
Maximum of 3 video streams (2x H.264 and 1x
MJPEG)
Stream 1: H.264, max. resolution 1280x720
Stream 2: H.264, max. resolution 720x480
Stream 3: MJPEG, max. resolution 720x480
Note: Streams 2 and 3 must be the same resolution.
NTSC
PAL
Max.
Max.
Size
Size
FPS
FPS
QCIF 176 x 120 30
176 x 144 25
CIF
352 x 240 30
352 x 288 25
VGA
640 x 480 30
640 x 480 25
4CIF
704 x 480 30
704 x 576 25
Full D1 720 x 480 30
720 x 576 25
SVGA 800 x 600 30
800 x 600 25
HD
1280 x 720 30
1280 x 720 25
Up to 30/25 FPS for each of 3 independent streams
at max. resolution.
• DynaStream™ supported for changing the
video frame rate automatically
• 3 privacy mask areas provided
• Adjustable image size and quality
• Timestamp and text overlay
• Maximum of 10 simultaneous unicast
connections
• ROI (Region of Interest) configuration for up to
3 areas
Digital PTZ
TCP, UDP, HTTP, SMTP, FTP, Telnet, NTP, DNS,
DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, QoS,
SNMPv1/v2c/v3, DDNS, Modbus/TCP, 802.1X,
SSH/SSL
1 10/100BaseT(X) Ethernet port, RJ45 connector
OnVIF
Standard SD socket (SDHC)
1, max. 8mA
Low: +13V to +30V
High: -30 to +3V
1, max. 24 VDC @ 1 A
1 full-duplex RS-485 port
Indicates if the system booted properly or not
10 Mbps or 100 Mbps
Power on/off
12 VDC, 24 VDC, 24 VAC or Power over Ethernet
(PoE, 802.3af)
- 11 -
Physical Characteristics
Housing
Metal housing, IP30 rated
Dimensions
78 x 65 x 150 mm
Installation
Wall mounting, ceiling mounting, pole mounting,
corner mounting
(You may need to purchase external housing and/or
mounting accessories separately.)
Security
Password
User level password protection
Filtering
By IP address
Authentication
802.1X
Encryption
SSL/SSH
Alarm
Intelligent video
Camera tampering, virtual fence, object counting,
alert zone, missing object, loitering object (except
for camera tamper, IVA functions are optional)
Video Motion
3 independently configurable motion areas
Detection
Scheduling
Daily repeat timing schedule
Imaging
JPEG snapshots for pre/trigger/post alarm images
Email/FTP
Automatic transfer of stored images via email or
messaging
FTP as event-triggered actions
Custom Alarms
HTTP event servers and CGI events for setting
customized alarm actions
Pre-alarm Buffer
24 MB video buffer for JPEG snapshot images
Environmental Limits
Operating
Standard Models: 0 to 60°C (32 to 140°F )
Temperature
Wide Temp. Models: -40 to 75°C (-40 to 167°F )
Storage
-40 to 85°C (-40 to 185°F)
Temperature
Ambient Relative
5 to 95% (non-condensing)
Humidity
Regulatory Approvals
Safety
UL 60950-1
EN 50121-4
NEMA TS2
Class 1 Division 2 (Pending)
Atex Zone 2 (Pending)
EMI
FCC Part 15, CISPR (EN 55022) class A
EMS
EN 61000-4-2 (ESD), Level 3
EN 61000-4-3 (RS), Level 3
EN 61000-4-4 (EFT), Level 3
EN 61000-4-5 (Surge), Level 3
EN 61000-4-6 (CS), Level 3
EN 61000-4-8,
EN 61000-4-11
Shock
IEC 60068-2-27
Freefall
IEC 60068-2-32
Vibration
IEC 60068-2-6
Warranty
Warranty period
5 years
Details
See www.moxa.com/warranty
- 12 -
Minimum Viewing System Requirements
CPU: Pentium 4, 2.4 GHz
Memory: 512 MB of memory
OS: Windows XP/2000 with SP4 or above, Windows Vista, Windows 7
Browser: Internet Explorer 6.x or above
Multimedia: DirectX 9.0c or above
Software Utility
VPort SDK PLUS
Includes CGI commands, ActiveX Control, and API
library for customized applications or system
integration for third third-party developers (the
latest version of SDK is available for download from
Moxa's website).
Accessories
Enclosure
VP-CI701 (IP68 Indoor/Outdoor Housing)
Brackets
VP-CI800 (Wall Mount Bracket)
VP-CI815 (Pole Mount Bracket)
Lens
VP-3112MPIR (3.1 to 8 mm, F1.2, Day&Night)
VP-1214MPIR (12.5 to 50 mm, F1.4 Day&Night)
Technical Support Contact Information
www.moxa.com/support
Moxa Americas:
Toll-free: 1-888-669-2872
Tel: 1-714-528-6777
Fax: 1-714-528-6778
Moxa China (Shanghai office):
Toll-free: 800-820-5036
Tel: +86-21-5258-9955
Fax: +86-21-5258-5505
Moxa Europe:
Tel: +49-89-3 70 03 99-0
Fax: +49-89-3 70 03 99-99
Moxa Asia-Pacific:
Tel: +886-2-8919-1230
Fax: +886-2-8919-1231
- 13 -
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising