TecMate® - Catalog
Since 1994!
Battery Chargers
Battery Monitors
Battery Testers
Cables
Diagnostic Tools
LED Flashlights
USB Chargers
CONTENT
BATTERY
CHARGERS
The Battery Saving
Charger
DC
CABLES
DC
cable
USB CHARGERS
LED FLASHLIGHTS
BATTERY MONITORS
BATTERY TESTERS
DIAGNOSTIC TOOLS
Ignition
duo
PREFIX: TEC
e.g. TECTM85 / TECO6
BATTERY
CHARGERS
The Battery Saving
Charger
BANKS
BATTERY
VOLTS
CHARGE
AMPS
STEPS
SAVE MODE
1
12V
0.9A
3
Low Volt Start 8V
PRODUCT
SKU (PREFIX : TEC)
MSRP
OptiMate 1 STANDARD
TM85
DESCRIPTION
OptiMate 1, 12V Battery
Maintainer
Cost effective 12V battery
maintenance!
24/7 Safe long term battery care –
Maintain any type 12 volt lead-acid
battery without overcharging.
IDEAL FOR:
STD
2 - 50Ah
15A
FUSE
USE: INDOOR t°min: -4°F/-20°C
AC supply: 110-120V 60Hz
Plug in case, vented
NOT FOR SALE IN CALIFORNIA
OptiMate 1 GLOBAL
TM401
OptiMate 1 Automatic
charger /maintainer
1
12V
0.6A
Smart 12V battery maintenance!
Smart voltage & current control.
24/7 Safe long term battery care.
OptiMate 24/7 maintenance with
desulfation pulse.
4
Low Volt Start 4V
IDEAL FOR:
STD
2 - 30Ah
15A
FUSE
USE: INDOOR t°min: -4°F/-20°C
AC supply: 100-240V 50-60Hz
Plug in case, dustproof
High efficiency (CEC listed)
OptiMate 2
TM421
OptiMate 2, Smart
Battery Charger
1
12V
0.8A
Advanced 12V battery
maintenance!
Smart voltage & current control.
Charge flat batteries from 2 Volt.
OptiMate 24/7 maintenance with
desulfation pulse.
4
Low Volt Start 2V
IDEAL FOR:
STD
3 - 96Ah
15A
FUSE
USE: INDOOR/OUTDOOR t°min: -4°F/-20°C
AC supply: 100-240V 50-60Hz
Weatherproof case with wall mounts
High efficiency (CEC listed)
OptiMate 3, 12V
Battery Saving Charger
1
12V
0.8A
Most Trusted battery charger in
power sport / small engine.
Recovers sulfated batteries.
Test after charging.
OptiMate 24/7 maintenance with
desulfation pulse.
7
Low Volt Start 2V
2 step desulfation recovery
IDEAL FOR:
STD
3 - 50Ah
15A
USE: INDOOR/OUTDOOR t°min: -4°F/-20°C
FUSE
OptiMate 3
TM431
AC supply: 100-240V 50-60Hz
High efficiency (CEC listed)
Weatherproof case with wall mounts
CH A R G E R MA I N TA I N ER S
BATTERY
CHARGERS
The Battery Saving
Charger
BANKS
BATTERY
VOLTS
CHARGE
AMPS
STEPS
SAVE MODE
2
12V
0.8A
7
Low Volt Start 2V
2 step desulfation recovery
PRODUCT
SKU (PREFIX : TEC)
MSRP
DESCRIPTION
OptiMate 3 DUAL x2 bank OptiMate 2-Bank
Battery Saving Charger
TM451
x2
OptiMate 3 multibank 2 independent charge banks.
Recovers sulfated batteries.
Tests after charging.
OptiMate 24/7 maintenance with
desulfation pulse.
IDEAL FOR:
STD
3 - 50Ah
15A
FUSE
USE: INDOOR/OUTDOOR t°min: -4°F/-20°C
AC supply: 100-240V 50-60Hz
Weatherproof case with wall mounts
High efficiency (CEC listed)
OptiMate 3 QUAD x4 bank OptiMate 4-Bank
Battery Saving Charger
TM455
x4
4
12V
0.8A
OptiMate 3 multibank independent charge banks.
Recovers sulfated batteries.
Tests after charging.
OptiMate 24/7 maintenance with
desulfation pulse.
7
Low Volt Start 2V
2 step desulfation recovery
IDEAL FOR:
STD
3 - 50Ah
15A
FUSE
USE: INDOOR/OUTDOOR t°min: -4°F/-20°C
AC supply: 100-240V 50-60Hz
Weatherproof case with wall mounts
High efficiency (CEC listed)
OptiMate 5 VoltMatic
TM223
OptiMate 5 Advanced
6/12V Battery Charger
1
6/12V
4A / 2.8A
Advanced 6V & 12V battery care.
VoltMatic 6V/12V selection.
Saves 6V and 12V sulfated batteries.
Tests after charging.
OptiMate 24/7 maintenance
with desulfation pulse.
8
Low Volt Start 1V
2 step desulfation recovery
IDEAL FOR:
STD
8 - 120Ah
15A
FUSE
USE: INDOOR/OUTDOOR t°min: -4°F/-20°C
AC supply: 100-240V 50-60Hz
Weatherproof case with wall mounts
High efficiency (CEC listed)
OptiMate 6 Ampmatic
Battery Charger, 5A
1
12V
5A
15A
The world’s most advanced fully
automatic battery charger!
Saves dead ‘flat’ sulfated batteries
from 0.5V. Tests BEFORE & after
charging. Ampmatic: adjusts to
any battery size. OptiMate 24/7
maintenance with desulfation pulse.
FUSE
OptiMate 6 Ampmatic
TM181
AC supply: 100-240V 50-60Hz
High efficiency (CEC listed)
9
Low Volt Start 0.5V
2 step desulfation recovery
IDEAL FOR:
STD
3 - 240Ah
USE: INDOOR/OUTDOOR t°min: -40°F/-40°C
Weatherproof case with wall mounts
CH A R G E R MA I N TA I N ER S
BATTERY
CHARGERS
The Battery Saving
Charger
BANKS
BATTERY
VOLTS
CHARGE
AMPS
STEPS
SAVE MODE
1
12V
5A
9
Low Volt Start 0.5V
2 step desulfation recovery
PRODUCT
MSRP
OptiMate 6 Select
charger + power supply
15A
OptiMate 6 SELECT
TM191
DESCRIPTION
FUSE
SKU (PREFIX : TEC)
The world’s most advanced battery
charger for starter & deep cycle
batteries!
Selection: 14.4V / 14.7V / Power
Supply. Ampmatic charge, temperature
adjusted. 13.6V 4A powersupply.
OptiMate 24/7 maintenance with pulse.
USE: INDOOR/OUTDOOR t°min: -40°F/-40°C
AC supply: 100-240V 50-60Hz
Weatherproof case with wall mounts
AVAILABLE
JULY 2015
OptiMate 6 12V/24V
TM193
STD
3 - 240Ah
High efficiency (CEC listed)
OptiMate 6 12/24V
battery charger
1
12V
24V
5A
2.5A
15A
Low Volt Start 0.5V (12V)
8
1 step desulfation recovery
IDEAL FOR:
3 - 200Ah (12V)
1 - 100Ah (24V)
STD
USE: INDOOR/OUTDOOR t°min: -40°F/-40°C
FUSE
The world’s most advanced 12-24V
battery charger!
Saves dead ‘flat’ sulfated batteries.
Tests BEFORE & after charging.
Ampmatic: adjusts to any battery
size. OptiMate 24/7 maintenance with
desulfation pulse.
AC supply: 100-240V 50-60Hz
AVAILABLE
JULY 2015
Weatherproof case with wall mounts
High efficiency (CEC listed)
15A
OptiMate Lithium
5A charger BMS reset
FUSE
OptiMate Lithium 4s 5A
TM291
IDEAL FOR:
1
12.8V 13.2V
5A
Low Volt Start 0.5V
3 step low Volt save and
test
10
Ultimate LiFePO4 professional battery
charger
Battery BMS reset. Advanced LiFePO4
low volt save. SafeT° Ampmatic charge
control: adjusts to any battery size. Tests
BEFORE & after charging. OptiMate 24/7
maintenance for lithium.
USE: INDOOR/OUTDOOR t°min: -40°F/-40°C
AC supply: 100-240V 50-60Hz
Weatherproof case with wall mounts
IDEAL FOR:
LFP
up to 100Ah
High efficiency (CEC listed)
OptiMate Lithium 4s 0.8A QUAD OptiMate Lithium
0.8A 4-Bank BMS reset
TM485
x4
4
12.8V 13.2V
0.8A
Ultimate LiFePO4 professional
battery charger
Battery BMS reset. Advanced LiFePO4
low volt save. 4 independent charge
banks. OptiMate 24/7 maintenance for
lithium.
8
Low Volt Start 0.5V
3 step low Volt save and test
IDEAL FOR:
LFP
up to 30Ah
15A
FUSE
USE: INDOOR/OUTDOOR t°min: -40°F/-40°C
AC supply: 100-240V 50-60Hz
High efficiency (CEC listed)
Weatherproof case with wall mounts
BATTERY
B AT T ERY
CHARGERS
SAVICH
NG
A -RCH
G EAR
R MA
G ERI N-TTA
ESI NT ER S
-MA I N TA I N E R
DC
DC
BANKS
BATTERY
VOLTS
CHARGE
AMPS
STEPS
SAVE MODE
1
12V
2A
7
Low Volt Start 1V
2 step desulfation recovery
PRODUCT
DESCRIPTION
OptiMate 12V Battery to
Battery charger
Charge your 12V battery from
another 12V battery!
Charge without AC power. Saves
your ‘dead’ battery from 1V. Maintain
your remote battery. Source battery
protection, efficient long term
maintenance program.
15A
15A
OptiMate DC-DC 12V 2A
TM500
FUSE
MSRP
FUSE
SKU (PREFIX : TEC)
charger with 6W panel
STD
6 - 96Ah
USE: INDOOR/OUTDOOR t°min: -40°F/-40°C
Weatherproof case with wall mounts
AVAILABLE
JULY 2015
OptiMate Solar 12V
IDEAL FOR:
Supply: 12-15VDC
OptiMate Solar 12V
charger w/ 6W panel
1
12V
TM524
1-5A
pulse
The World’s most efficient 12V solar
pulse charge system, with 6W hi
efficiency panel.
Smart pulse current control. Save
your dead battery with solar power.
Controlled safe long term maintenance.
FUSE
15A
AVAILABLE
JULY 2015
6W solar panel included.
Low Volt Start 1V
4
1 step pulse desulfation
recovery
IDEAL FOR:
STD
from 2Ah
USE: INDOOR/OUTDOOR
Weatherproof case with mounts
Supply: 14-22VDC
OptiMate Solar 12V
charge controller
TM520
OptiMate Solar 12V pulse
charger
1
12V
1-5A
pulse
OptiMate Solar 6V
charge controller
TM521
1 step pulse desulfation
recovery
IDEAL FOR:
STD
from 2Ah
USE: INDOOR/OUTDOOR
Weatherproof case with mounts
FUSE
AVAILABLE
JULY 2015
15A
Make your 12V solar panel work
better with the worlds most efficient
12V pulse charge system! Smart
pulse current control. Save your dead
battery with solar power. Controlled
safe long term maintenance.
Low Volt Start 1V
4
Supply: 14-22VDC
OptiMate Solar 6V pulse
charger
1
6V
1-5A
pulse
Charge your 6V battery from a
standard 12V solar panel!
Smart pulse current control. Save
your dead battery with solar power.
Controlled safe long term maintenance.
Low Volt Start 1V
4
1 step pulse desulfation
recovery
IDEAL FOR:
STD
from 2Ah
Weatherproof case with mounts
FUSE
AVAILABLE
JULY 2015
15A
USE: INDOOR/OUTDOOR
Supply: 10-22VDC
BATTERY
BAT T E RY
CH ASAVI
R G ENRGMA
- CI N
HA
TARIGNER
ER SMA I N TA I N E R
CHARGERS
PRODUCT
DESCRIPTION
Optimate PRO-S
TS171
OptiMate PRO-S 4A
1-bank prof. charger
BANKS
BATTERY
VOLTS
CHARGE
AMPS
TEST
AMPS
SELECTION
PROGRAM
STEPS
1
12V
4A
0.1A
NEW / 2A / 4A
8
Activate new battery in one hour.
Recover / desulphate battery from
1V. Test battery condition, display
state of charge / health (5 levels).
Maintain battery, keep ready.
Optimate PRO-4
TS53
Optimate PRO4 4A
4-bank prof. charger
4
12V
4A
Activate new battery in one hour.
Recover / desulphate battery from
1V. Test battery condition, display
state of charge / health (5 levels).
Maintain battery, keep ready.
Battery range: 2 - 40Ah
Type: 10Hr rated 12V starter batteries for
power sport, small engine, lawn & garden.
0.1A
NEW / 2A / 4A
8
Battery range: 2 - 40Ah
Type: 10Hr rated 12V starter batteries for
power sport, small engine, lawn & garden.
4 bank version of OptiMate PRO-S!
Optimate PRO2
Optimate PRO-2 x 2A
2-bank saving
TS181
charger
2
12V
1.8A
0.1A
AUTOMATIC
8
Recover / desulphate battery from Battery range: 2 - 70Ah
as low as 2V. Test battery condition, Type: 10 / 20Hr rated 12V lead-acid
display state of charge / health
batteries.
(5 levels). Maintain battery,
keep ready.
Optimate PRO-2 x 10A OptiMate PRO2 10A
TS185
2-Bank prof. charger
2
12V
10A
FAST recharge on vehicle at full current
with desulphation mode deactivated.
Charge voltage selection of 14.4V
for standard batteries and 14.7V for
hi performance AGM / GEL batteries.
Recover / desulphate from as low as
1V. Test battery condition, display state
of charge / health (5 levels). Maintain
battery, keep ready.
0.1A
FAST / 14.4V /
14.7V
9
Battery range: 24 - 240Ah
Type: 10 / 20Hr rated 12V lead-acid
batteries, STD, AGM, GEL and DEEP CYCLE.
BATTERY
CHARGERS
PRODUCT
DESCRIPTION
Optimate PRO-8
TS45
Optimate Pro8 6/12V
8-bank charger
BANKS
8
BATTERY
VOLTS
CHARGE
AMPS
TEST
AMPS
SELECTION
PROGRAM
STEPS
6V
12V
1A
NONE
6V / 12V
6
Recover / desulphate battery
from as low as 1V. Test battery
condition, display GOOD / BAD
state of health. Maintain battery,
keep ready.
AccuMate PRO-5
TM131
AccuMate PRO5 smartcharger/maintainer
5
12V
1.8A
Charge program BULK,
ABSORPTION, MAINTAIN (IUoU).
Low Volt start from 2 Volt. Good for
fully charging and then keeping
batteries at the ready before
resale.
AccuMate PRO 12-24V AccuMate Pro12V 7A/24V
3.5A charger
TM212
1
12V
24V
7A
3.5A
Charge program BULK,
ABSORPTION, MAINTAIN (IUoU).
Low Volt start from 2 Volt. Good
for fully charging any deep cycle
or starter battery. Protected 24V
selection (no charge <16V).
BatteryMate 150-9
TS02
BatteryMate 150-09,
load tester charger
1
12V
9A
Battery range: 3 - 50Ah
Type: 10 / 20Hr rated 12V lead-acid
batteries, STD, AGM, GEL and DEEP
CYCLE.
NONE
AUTOMATIC
4
Battery range: 6 - 70Ah
Type: 10 / 20Hr rated 12V lead-acid
batteries, STD, AGM, GEL and DEEP
CYCLE.
NONE
12V 7A
24V 3.5A
4
Battery range: 6 - 70Ah
10 / 20Hr rated 12V lead-acid batteries,
STD, AGM, GEL and DEEP CYCLE.
150A
(300CCA)
1. Load Test &
Charge current;
2. Charge time;
3. 14.4V / 16.9V
Bulk charge level.
4 charge
+ 2 test
Selector for load test & charge current Battery range: 2 - 40Ah
per battery table. Activate new battery 10Hr rated 12V starter batteries for power
in 30 minutes. Recover / desulphate
sport, small engine, lawn & garden.
battery from 1V. Voltage selection 14.4
/ 16.9V (AGM). Load Test battery, 3
sec cranking test, 15 sec health test.
Display state of charge / health (10
levels). Maintain battery, keep ready.
BATTERY
CHARGERS
OP T IONAL AC C ES SO R IES
PRODUCT
SKU (PREFIX : TEC)
MSRP
DESCRIPTION
BANKS
1
CHARGE
AMPS
STEPS
SAVE MODE
6V
12V
0.9A
3
Low Volt Start 4V/ 8V
Cost effective 6V / 12V battery
maintenance!
24/7 Safe long term battery care –
Maintain any type 6V / 12 volt leadacid battery without overcharging.
Automatic reversion to charge mode
if current draw during maintenance
increases.
FUSE
15A
AccuMate ChargeMatic
AccuMate 6V/12V Mini
6/12 mini
Battery Maintainer
TM84
BATTERY
VOLTS
IDEAL FOR:
STD
From 2Ah
USE: INDOOR -4°F / -20°C
AC supply: 110-120V 50-60Hz
Plug in case, vented.
NOT FOR SALE IN CALIFORNIA
AccuMate ChargeMatic
AccuMate 6/12V smart6/12
charger/maintainer
TM08
1
6V
12V
1.2A
15A
FUSE
Smart 6V/12V battery maintenance!
Smart voltage & current control with
tempertaure regulation. Maintain any
type 6V / 12 volt lead-acid battery
without overcharging. Automatic
reversion to charge mode if current
draw during maintenance increases.
AC supply: 110-120V 50-60Hz
NOT FOR SALE IN CALIFORNIA
O P TIONAL AC C ES S ORIES
DESCRIPTION
Bracket for Workshop Chargers
SKU
TS218
Battery Clips with rubber handles
O4
Battery Clips, Fused, Rubber
handles
O14
Extender, power-sport, 6ft / 1.8m
O3
4
Low Volt Start 2V
IDEAL FOR:
STD
From 2Ah
USE: INDOOR -4°F / -20°C
Desktop case, vented.
CABLES
SAE - industry standard 2 pin
charger connector
DC - Axial Ø5.5mm x Ø2.5mm plug &
socket used with heated apparel
SAE panel mount - panel mount
socket found on O-20
cable
Part #
AMPS
MSRP
(USD)
DESCRIPTION
x1 Weatherproof Battery Lead - Premium quick connect permanent battery lead with weather protected connection system and cable.
Battery lead 1/4" rings,
18awg (-40°F)
/products/o-1
O1JAR
20 x O1 Battery lead
(1/4" rings)
O1BOX
100 x O1Battery lead
(1/4" rings)
O1
O11
20" / 50cm
-40°F / -40°C
SAE
1/4" / M6 ringlets
5A
15A
/products/o-1jar
115.50
20"/ 50cm
-40°F / -40°C
SAE
1/4" / M6 ringlets
5A
15A
/products/o-1box
507.90
20" / 50cm
-40°F / -40°C
SAE
1/4" / M6 ringlets
5A
15A
9.90
20" / 50cm
-40°F / -40°C
SAE
5/16" / M8 ringlets
10A
15A
115.50
20" / 50cm
-40°F / -40°C
SAE
5/16" / M8 ringlets
10A
15A
9.90
20" / 50cm
-40°F / -40°C
DC socket 5.5x2.5mm
1/4" / M6 ringlets
10A
15A
Battery lead 5/16" rings,
/products/o-11
16awg (-40°F)
O11JAR
20 x O11 battery lead
(5/16" ringlets)
/products/o-11jar
O21
Weatherproof battery
lead to DC socket
/products/o-21
15A
FUSE
9.90
x2 Auto Plug Ø21mm - fits all standard automotive 12 Volt sockets and OEM sockets on Harley-Davidson, KTM, Yamaha
O2
SAE to AUTO BIKE plug
adapter
/products/o-2
17.90
20" / 50cm
-4°F / -20°C
SAE
Auto / Bike
5A
8A
O12
Adapter, SAE to AUTO
plug, 10A fuse
/products/o-12
7.90
20" / 50cm
-4°F / -20°C
SAE
Auto
5A
10A
x3 Charge Cable Extender - Premium extenders with weather protected in-line connection system.
O3
Extender, power-sport,
6ft / 1.8m
/products/o-3
9.90
6ft / 180cm
-4°F / -20°C
SAE
SAE
5A
-
O13
Extender, power-sport,
15ft / 4.6m
/products/o-13
11.90
15ft /460cm
-4°F / -20°C
SAE
SAE
5A
-
O23
Extender, ‘Arctic’ 10A,
15ft / 4.6m
/products/o-23
14.90
15ft / 460cm
-40°F / -40°C
SAE
SAE
10A
-
O33
Extender, ‘Arctic’ 5A,
40" / 1m
/products/o-33
9.90
40" / 100cm
-40°F / -40°C
SAE
SAE
5A
-
x4 Battery Clips - Custom designed to fit square, flat and round posts.
O4
Battery Clips with rubber
/products/o-4
handles
8.90
20" / 50cm
-40°F / -40°C
SAE
OptiMate Clips
10A
-
O14
Battery Clips, fused,
rubber handles
13.90
20" / 50cm
-40°F / -40°C
SAE
OptiMate Clips
10A
15A
15A
FUSE
/products/o-14
x5 Y-Splitter - SAE to SAE, DC to SAE, DC to DC (DC : used in heated apparel, image & description below)
O5
Y-splitter, SAE IN to 2 x
fused SAE OUT
/products/o-5
13.90
20" / 50cm
-40°F / -40°C
SAE
2 x SAE
5A
-
O15
Y-splitter, SAE IN to 2 x
SAE OUT
/products/o-15
9.90
12" / 30cm
-4°F / -20°C
SAE
2 x SAE
5A
-
O35
YSplitter SAE IN to 2 x
DC sockets OUT
/products/o-35
11.90
12" / 30cm
-40°F / -40°C
SAE
2 x DC socket
10A
-
O45
Y-Splitter DC plug IN 2 x
/products/o-45
DC socket OUT
11.90
12" / 30cm
-40°F / -40°C
DC Plug
2 x DC socket
5A
-
CABLES
AUTO plug - standard plug that fits
automotive 12V socket (Ø21mm)
AUTO socket - standard
12V socket (Ø21mm)
BIKE straight plug
- Ø12mm DIN plug
BIKE 90° plug - Low profile
sealed Ø12mm plug
cable
Part #
AMPS
MSRP
(USD)
DESCRIPTION
x6 AUTO SOCKET - Socket barrel has internal locking slots to firmly hold a GPS or USB charger (with side leaf springs) in position.
O6
Adapter AUTO socket to
SAE (dia. 21mm)
/products/o-6
10.90
20"/ 50cm
-40°F / -40°C
SAE
2 x SAE
10A
-
O16
AUTO socket to BIKE
plug adapter
/products/o-16
16.90
12"/ 30cm
-4°F / -20°C
SAE
2 x SAE
5A
-
O26
Y-splitter, SAE in 2 x
AUTO socket out
/products/o-26
12.90
12"/ 30cm
-40°F / -40°C
SAE
2 x DC socket
10A
-
O36
YSplitter BIKE 90° plug
AUTO socket out
/products/o-36
25.90
12" / 30cm
-40°F / -40°C
SAE
2 x DC socket
10A
-
x7 ADAPTERS - SAE to OTHER - Adapt your motorcycle,side-by-side, ATV, car or battery charger to fit OptiMate SAE connectors.
+
-
+
-
15A
FUSE
O7
KET to SAE Adapter,
battery lead
/products/o-7
5.90
6" / 15cm
-40°F / -40°C
SAE
KET/TM plug
5A
-
O17
KET/TM to SAE Adapter,
charger lead
/products/o-17
5.90
6" /15cm
-4°F / -20°C
KET/TM socket
SAE
5A
-
O27
SAE to SAE polarity
changer 6"
/products/o-27
5.90
6" / 15cm
-40°F / -40°C
SAE
SAE
5A
-
O37
OBDII to SAE Charge
Adapter
/products/o-37
17.90
40" / 100cm
-40°F / -40°C
SAE
OBD II plug
10A
15A
O47
DUCATI to SAE Charge
Adapter
/products/o-47
25.90
12" / 30cm
-40°F / -40°C
SAE
DUCATI > 2010
5A
-
O57
MV Agusta to SAE
Charge Adapter
/products/o-57
13.90
12" / 30cm
-40°F / -40°C
SAE
MV AGUSTA
5A
-
6" / 15cm
-40°F / -40°C
SAE
SAE
10A
-
6" / 15cm
-40°F / -40°C
SAE
DC plug
10A
-
6" / 15cm
-40°F / -40°C
SAE
DC sockeet
10A
-
OBDII
O67
Adapter kit, 3 piece, SAE
to DC 2.5mm
/products/o-67
17.90
x8 BIKE SOCKET (DIN Ø12mm) - Matches sockets found on BMW, Triumph, Victory and selected Honda Goldwing motorcycles and John Deere ATVs.
O8
Standard BIKE (Ø12mm)
socket,1/4" rings
/products/o-8
19.90
40" / 100cm
-40°F / -40°C
BIKE (DIN) plastic
1/4" / M6 ringlets
5A
15A
O18
Metal BIKE (Ø12mm)
socket, 1/4" rings
/products/o-18
24.90
40" / 100cm
-40°F / -40°C
BIKE (DIN) metal
1/4" / M6 ringlets
5A
15A
x9 BIKE PLUG (DIN Ø12mm) - Fits sockets found on BMW, Triumph, Victory and selected Honda Goldwing motorcycles and John Deere ATVs.
O9
Adapter extender SAE to
BIKE Straight plug
/products/o-9
16.90
4ft / 120cm
-40°F / -40°C
SAE
BIKE(DIN) straight
5A
-
O19
BIKE Straight plug to
SAE 12"
/products/o-19
12.90
12" / 30cm
-40°F / -40°C
SAE
BIKE(DIN) straight
5A
-
O19R
BIKE 90° lowprofile plug
to SAE 6"
/products/o-19
16.90
6" / 15cm
-40°F / -40°C
SAE
BIKE(DIN) plug 90°
5A
-
O29
Adapter, SAE to BIKE 90°
/products/o-29
DIN plug, 40"
19.90
40" / 100cm
-40°F / -40°C
SAE
BIKE(DIN) plug 90°
5A
-
O39
DC to BIKE 90° plug for
heated apparel
19.90
24" / 60cm
-40°F / -40°C
DC socket
BIKE(DIN) plug 90°
5A
-
/products/o-39
CABLES
USB CHARGERS
AUTO plug - standard plug that fits
automotive 12V socket (Ø21mm)
AUTO socket - standard
12V socket (Ø21mm)
BIKE straight plug
- Ø12mm DIN plug
BIKE 90° plug - Low profile
sealed Ø12mm plug
cable
Part #
AMPS
MSRP
(USD)
DESCRIPTION
x0 Custom Cables & Accessories - custom designed hard and soft panel connectors
O20
O30
Part #
10x USB CHARGERS
& CABLES
extender
SAE socket w/ cap,
panel (>1/4") mount
Tank bag and hard case
power entry
/products/o-20
/products/o-30
16.90
19.90
6" 15cm
-40°F -40°C
SAE panel mount
SAE
6" 15cm
-40°F -40°C
DC socket
SAE
6" 15cm
-40°F -40°C
SAE
DC plug
MSRP
(USD)
DESCRIPTION
mini (2 types)
5A
-
FEATURES
Low input auto off function protects vehicle battery from total discharge. Communicates with Apple
devices for max. current delivery. Protected against short circuit, overload and high voltage supply.
SAE
Battery auto protect off
< 12.4V, extender, mini &
micro adapter
SAE
Battery auto protect off
< 12.4V, 40" input and 40"
output cable. USB mini and
micro adapter.
10" 25cm
DC plug
Power from 11.1V battery
for heated apparel or 12V.
Sealed charger.
44.90
10" 25cm
BIKE 90° plug
Connector for BMW, Victory,
Triumph motorcycles, John
Deere ATVs.
/products/o-106
19.90
2" 5cm
Auto plug
2 x USB out
/products/o-107
33.90
10" 25cm
SAE
Battery auto protect off
< 12.4V.
Sealed charger.
USB-A
USB mini
USB micro
Cables communicate
charge cable status for
Garmin GPS, HTC, Nokia,
Samsung & Microsoft
phones.
O100
1A USB charger with
cables, SAE in
O102
1A weatherproof USB
charger with cables
/products/o-102
31.90
80" 200cm
O103
2.1A Weatherproof USB
charger DC plug
/products/o-103
33.90
O104
2.1A weatherproof USB
charger 90° DIN
/products/o-104
O106
2.1A dual output USB
charger, AUTO plug
O107
2.1A weatherproof USB
charger, SAE in
/products/o-100
28.90
3 1/4" 8cm
1m / 40"
micro (2 types)
10A
-
O109
USB Adaptor Kit Charger
Accessory
/products/o-109
14.90
40" 100cm
4x 6" 15cm
LED FLASHLIGHTS
BATTERY MONITORS
Part #
O120
12V Emergency
flashlight with 6 LED
/products/o-120
19.90
O130
Rechargeable pocket
flashlight - fits auto
socket
/products/o-130
18.90
Part #
DESCRIPTION
12x BATTERY MONITORS
+
FEATURES
Low input auto off function protects vehicle battery from total discharge. Communicates with Apple
devices for max. current delivery. Protected against short circuit, overload and high voltage supply.
12x LED LIGHTS
+
MSRP
(USD)
DESCRIPTION
O122
O123
O124
O125
O127
4" / 10cm
SAE +
40" / 100cm
cable
3 1/4" / 8cm AUTO
MSRP
(USD)
Checks vehicle charge
voltage, battery voltage.
6-LED flashlight powered from
vehicle battery.
Rechargeable from standard
12V socket
FEATURES
Monitor battery status, be warned when to recharge the battery before it dies. All LED monitors
have a built in SAE charge port. SMART battery monitors also check vehicle alternator / stator
charge volts.
LOW BATTERY Warning
Hi Performance 12V
LOW BATTERY Warning
ALL 12V batteries
Smart 4-LED battery
Monitor w/ ringlets
Smart 4-LED battery
Monitor, inline SAE
Smart 4-LED battery
Monitor, LITHIUM
/products/o-122
/products/o-123
/products/o-124
/products/o-125
/products/o-127
19.90
19.90
25.90
22.90
25.90
SAE in & SAE
charge port
Flashes bright red (visible from
a distance) when battery charge
level is below 50% (12.50V). For
high performance AGM batteries.
Includes O1 permanent battery
lead.
SAE in & SAE
charge port
Flashes bright red (visible from
a distance) when battery charge
level is below 50% (12.35V). For
any 12V lead-acid battery. Includes
O1 permanent battery lead.
1/4" / M6
ringlets & SAE
charge port
Flashes battery status every 5
seconds (4 LEDS). 4th LED for
high voltage AGM. With engine
running displays vehicle charge
voltage. Connects to battery
terminals directly.
6" / 15cm
SAE in & SAE
charge port
Flashes battery status every 5
seconds (4 LEDs). 4th LED for high
voltage AGM. With engine running
displays vehicle charge voltage.
Connects to installed SAE battery lead
or any SAE accessory able to connect
to battery or 12V vehicle socket.
20" / 50cm
1/4" / M6
ringlets & SAE
charge port
Flashes battery status every 10
seconds (3 LEDs). With engine
running displays vehicle charge
voltage. 4th LED warns of
overcharge. Connects to battery
terminals directly.
3 1/4" / 8cm
3 1/4" / 8cm
20" / 50cm
BATTERY TESTERS
PRODUCT
SKU (PREFIX : TEC)
MSRP
DESCRIPTION
OptiMate TEST Cranking OptiMate TEST battery &
power & Alternator tester charging system
TS121
BATTERY
VOLTS
12V
BATTERY TYPES
RESULT
All lead-acid engine
start & 12.8V lithium
used in place of
lead-acid
Battery state of charge;
Lowest cranking volts;
alternator charging voltage
The ultimate pocket tester for on-vehicle battery performance &
alternator voltage testing that every service technician should have!
Analyze battery and charging system in 3 steps!
Easy to use, connect to the battery and
1) Check battery charge level.
2) Record lowest start volts (displayed for 20 seconds).
3) Verify vehicle charging voltage.
Result displayed on bright LEDs. Instructions on the rear panel of tester.
Supply: vehicle battery
OptiMate TEST State of
charge tester
TS127
OptiMate STATE OF
Charge 12V batteries
12V
All lead-acid engine
start & 12.8V lithium
used in place of
lead-acid
Low voltage / state of charge
warning; voltage compared against
% charge bands for STD, AGM &
LITHIUM
The smart choice for a battery sales counter – check new batteries
before sale or test returned batteries!
State of charge results in Volts and percentage (%). Easy to use, connect
clips to battery and read the result.
Result displayed on bright LEDs. Instructions on the rear panel of tester.
Supply: vehicle battery
OptiMate TEST Cranking power & Alternator
tester TS121
OptiMate TEST State of charge tester
TS127
BATTERY TESTERS
PRODUCT
SKU (PREFIX : TEC)
MSRP
TestMate SPORT
TA-9
DESCRIPTION
TestMate POWERSPORT
12V battery tester
BATTERY
VOLTS
12V
BATTERY TYPES
10Hr rated 12V leadacid engine start for
power sport & small
engine vehicles
RESULT
CCA; State of Charge (SOC) and
State of Health (SOH).
Accurate starter battery diagnostics, power sport, small engine
batteries! TecMate developed custom test program for accurate testing
of STD (wet cell), 'dry charged' AGM (delivered with acid pack) and factory
activated hi performance AGM up to 35Ah.
Select battery type and enter Ah / CCA for accurate SOH & SOC result, then
TEST.
For CCA only simply press TEST and read the result on the bright LCD
screen.
Pre-select language for on screen instructions and results. 8
languages, including English, Spanish, French.
Supply: 9V PM9
TestMate AUTO 200Ah
TA-18
TestMate AUTOMOTIVE
12V battery tester
12V
20Hr rated 12V leadacid engine start for
auto & marine & truck
CCA; State of Charge (SOC) and
State of Health (SOH).
Accurate starter battery diagnostics, automotive / marine / truck.
Test program for accurate testing of STD (wet cell) and hi performance
AGM (flat plate and cyclic cell) up to 200Ah. Select battery type and enter
Ah / CCA for accurate SOH & SOC result, then TEST. For CCA only simply
press TEST and read the result on the bright LCD screen.
Pre-select language for on screen instructions and results. 8
languages, including English, Spanish, French.
Supply: 9V PM9
DIAGNOSTIC TOOLS
PRODUCT
SKU (PREFIX : TEC)
MSRP
CarbMate
TS111
DESCRIPTION
CarbMate Twin-engine
synchronising
CYLINDERS
DISPLAY
2
9 LEDs, horizontal
SYNCHRONIZE METHOD
Compares manifold pressure of
two cylinders
A twin cylinder engine owner’s favorite, the CarbMate displays the
vacuum difference between two cylinders on a single display. With
range resolution adjust of 0.5cmH to 2cmHg per LED. Zero adjust to centre
display before synchronizing. Standard accessories include 2xM6, 2xM5,
T-piece adapter and a 12V power cable. Optional 2 to 4-cylinder adapter
available. Approved as a recommended tool by Rotax aviation’s
official club ROAN.
Supply: 12V / vehicle/craft battery
SynchroMate
TS101
SynchroMate 2cylinder
synchronzer W/RPM
2
30 LEDs, horizontal
Compares manifold pressure of
two cylinders
The professional’s CarbMate+ with additional features such as
0.5cmHg fixed resolution display, ‘wireless’ RPM measurement
and absolute vacuum measurement of a single carburetor for
troubleshooting pressure issues. Standard accessories include a protective
holster, 2xM6 flexi-rigid, 2xM5 flexi-rigid, T-piece adapter and a 12V
power cable.
Optional 2 to 4-cylinder adapter available.
Supply: 12V / vehicle/craft battery
VacuumMate Workshop
TS81
VacuumMate WS
Workshop Synchronizer
4
4 x 40 LEDs, vertical
Each cylinder’s pressure is
displayed individually
The professional choice - OEM-recommended VacuumMate is the
unmatched industry standard! Intake synchronisation to 0.5cmHg
resolution, accurate ‘wireless’ RPM gauge, DYNamic valve diagnostics.
Four easy to read bar graph displays (visible in bright light), rugged casing.
Delivered with a nylon case, unique flexi-rigid 4xM6, 4xM5 & T-piece
adapters and a 12V power / charge cable. Optional 4 to 6 cylinder adapter
available.
Supply: 12V / vehicle /craft battery
VacuumMate Marine
TS71
VacuumMate ME Marine
Synchronizer
4
4 x 40 LEDs, vertical
Each cylinder’s pressure is
displayed individually
With rechargeable battery. The professional choice - OEMrecommended VacuumMate is the unmatched industry standard.
Intake synchronisation to 0.5cmHt resolution, accurate ‘wireless’ RPM
gauge, DYNamic valve diagnostics. Four easy to read bar graph displays
(visible in bright light), rugged casing. Delivered with a nylon case, unique
flexi-rigid 4xM6, 4xM5 & T-piece adapters and a 12V power / charge
cable. Optional 4 to 6 cylinder adapter available.
Supply: Rechargeable
internal battery or 12V external
DIAGNOSTIC TOOLS
Optional &
Accessories
& KITs for
CarbMate, SynchroMate
and VacuumMate
Optional Accessories
KITs for CarbMate,
SynchroMate
and VacuumMate
DESCRIPTION
SKU
Calibration kit, Synchro & Vac
TA11
Carburetor M5 flexi adapters
TS200
Carburetor M6 flexi adapters
TS201
Fixed short M5 Brass Adapter
TS203
Fixed short M6 Brass Adapter
TS204
Santoprene M5 Long Adapter
TS205
Santoprene M6 Long Adapter
TS206
2 to 4 Channel Adapter
TS220
4 to 6 Channel Adapter
TS221
Black Carry Bag for Diagnostic Tools
TS222
Black Protective Holster
TS223
Red Protective Holster
TS224
3' fuel & oil resistant hose
TS225
Replacement battery cord set
TS233
ROTAX Adapter with 2 x 6ft hoses
TS400
ROTAX Adapter W/ Accessory kit
TS400KIT
Replacement 6ft Rubber Hose
TS401
DIAGNOSTIC TOOLS
DUO
PRODUCT
SKU (PREFIX : TEC)
MSRP
DESCRIPTION
IgnitionMate
TS91
CYLINDERS
DISPLAY
1
2 x 40 LEDs vertical
IgnitionMate Engine Diagnostic Tool
TEST METHOD
Compares 2 signals on one cylinder primary, secondary & SPARK signals
A technician with basic ignition system knowledge can quickly
troubleshoot ignition problems and improve engine performance
on any type of ignition system. Dual display allows comparison of
two different parameters on the same cylinder, such as primary (VPK) &
secondary (kV) ignition coil voltage, SPARK current (misfires easily seen!).
Low voltage DC signals can also be measured e.g. fuel injection pulses.
Delivered in a nylon case containing all necessary cables & adapters.
Supply: Rechargeable
internal battery or 12V external
IgnitionMate DUO
TS93
Compares the same signal on
IgnitionMate DUO
Engine Diagnostic Tool
2
2 x 40 LEDs vertical two cylinders - primary, secondary &
SPARK signals
Simple comparitive trouble shooting of the same signal on different
cylinders, even different engines. Fine tuning, balancing of ignition pulses
for maximum engine performance on multi cylinder engines. Dual display,
measures primary (VPK) & secondary (kV) ignition coil voltage, SPARK
current (misfires easily seen!).
Delivered in a nylon case containing all necessary cables & adapters (as
shown in image).
Supply: Rechargeable
internal battery or 12V external
Probulator scoop probe
TEST kit
TM99
Probulator Kit Tool Accessory
4 pieces
Fits into rear of connectors without damage to waterproof seals.
Two pairs, different sizes.
Fits Ø4mm cable connectors as used on all popular digital multimeters.
Replacement Accessories for IgnitionMate, IgnitionMate DUO
DESCRIPTION
SKU
Peak Voltage Adapter Cable
TS207
H/T Pick-up Cable (stick coil) adapter
TS208
Ignitionmate Low Tension Lead Set
TS226
Replacement battery cord set
TS233
IMDUO LT Test Lead Set R/B
TS234
Super Smart
STATE OF CHARGE MONITOR
Smart 4 LED monitor displays
battery status during storage &
charging voltage when engine runs!
Draws less than 0.2 milli amps!
Fullty sealed, weatherproof!
Includes SAE charging port.
BATTERY STATUS INDICATION
EVERY 5 SECONDS (LED blinks).
BATTERY STATUS INDICATION
FOR HIGH VOLTAGE AGM.
STD
AGM
Yuasa YTX, YTZ, GYZ
Odyssey PC series
14.0V 14.5V
CHARGE VOLTAGE STATUS WITH
ENGINE RUNNING.
2 Models available
15A
124
L = 24" / 60cm
SAE
CHARGER
INPUT
TECO124
Battery Lead
M6 / 1 ⁄ 4"
SAE
125
L = 6" / 15cm
TECO125
SAE
CHARGER
INPUT
In-Line
SAE
2 auto/bike plug
4 battery clips
1/
11 battery lead
Sealing cap protects
charging input
when riding!
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising