CD Player XXII Technical Specif ications: • Output Level: 2V RMS ref 1KHz OdB • Frequency Response: +/- 0.25dB (20Hz - 20KHz) • Total Harmonic Distortion: <0.003% ref 1KHz OdB • Signal to Noise Ratio: >108dB, A weighted • Dynamic Range: >104dB • Digital Outputs: SP/DIF, Coaxial and Optical • Mains Supply: 110/120V or 220/240V, 50/60Hz (factory set) • Power Consumption: < 25VA • Remote Batteries: Type AAA 1.5V • Dimensions (H x W x D): 90mm x 440mm x 300mm • Nett Weight (unpacked): 5kg • Gross Weight (packed): 7kg high fidelity engineering high fidelity engineering since 1974 since 1974 Pre-Amplifier XXIII www.exposurehifi.com Technical Specif ications: • Gain (@ 1KHz): +18dB • Sensitivity: 250mV • Maximum Output: >12.5V RMS • Frequency Response: 3dB @ 2Hz and 64KHz ref 1KHz • Total Harmonic Distortion: <0.01%, @ 1.6V RMS output, 1KHz • Signal to Noise Ratio: >96dB, A weighted, ref 1.6V RMS output, 1KHz • Channel Separation: >60dB, 20Hz - 20KHz (typically >85dB @ 1KHz) • Mains Supply: 110/120V or 220/240V, 50/60Hz (factory set) • Power Consumption: <25VA • Dimensions (H x W x D): 90mm x 440mm x 300mm • Nett Weight (unpacked): 8kg • Gross Weight (packed): 10kg Exposure Electronics Ltd: The Works 59 North Street, Portslade, East Sussex BN41 1DH, England. Tel: +44 1273 423877 Fax: +44 1273 430619 components which deliver spine-tingling sound performance…at sensible prices. If you treasure listening pleasure above all, Exposure Asia Pacific: The Works Two 117A, Jalan SS2/24, 47300 Petaling Jaya, Selangor, Malaysia. Tel: +603 7875 8181 Fax: +603 7875 2833 Integrated Amplifier XXXV Technical Specif ications: • Power Output (2 channels): 80 Watts per channel at 1KHz into 8 Ohms • Power Output (2 channels): 160 Watts at 1KHz into 4 Ohms • Input Impedance: 19K Ohms minimum (line input) • Frequency Response: 20Hz- 20KHz +/- 0.5dB • Total Harmonic Distortion: <0.015% at rated output, ref 1KHz • Signal to Noise: >110dB, ref rated output • Channel Separation: >70dB, 20 Hz- 20KHz • Mains Supply: 110/220V or 220/240V, 50/60Hz (factory set) • Power Consumption: <400VA 8 Ohms load, both channels driven • Dimensions (H x W x D): 115mm x 440mm x 300mm • Nett Weight (unpacked): 11.5kg • Gross Weight (packed): 13.5kg The pleasures of high-end hi-fi can be addictive. For 30 years now, Exposure has dedicated itself towards hand-crafting this Classic series is, quite simply, Exposure’s best gift to you. Fluid, Natural and Highly Engaging... “There’s something of the ‘valve sound’ about its fluid and natural midrange, and the results are highly engaging - particularly, Dual Mono Power-Amplifier XXVIII as it transpired, with the Living Voice pair of test-reference speakers. Tonally this is a particularly gratifying amplifier, Technical Specif ications: • Power Output (Stereo): 70 Watts per channel, 8 ohms • Input Impedance: 18K Ohms @ 1KHz • Frequency Response: -3dB @ 3Hz and 62KHz, ref 1KHz • Total Harmonic Distortion: <0.02% at rated power 1KHz • Signal to Noise Ratio: 110dB A weighted, ref rated output • Channel Separation: >70dB, 20Hz - 20KHz (typically >95dB @ 1KHz) • Mains Supply: 110/120V or 220/240V, 50/60Hz (factory set) • Power Consumption: <350VA 8 ohm load both channels driven • Dimensions (H x W x D): 115mm x 440mm x 300mm • Nett Weight (unpacked): 11kg • Gross Weight (packed): 13kg highly convincing with instruments and voices - the number of times ‘great voice’ appeared in the listening notes started to look silly.” o w er Amplif ier “Hi-Fi Choice” magazine on the XXIII Pr e-Amplif ier and XXVII Dual Mono PPo Amplifier Pre-Amplif e-Amplifier S e r i e s “It is on par with the best that I have heard.” “Hi-Fi News” magazine on the XXII CD Player Now that you have read the sales pitch and the reviews, listen to the Exposure Classic range. From the first few notes, you will realise that surprisingly breath-taking hi-fi is, in fact, well within your reach. EXPOSURE CLASSICS SERIES Available in Titanium or Black In line with Exposure’s policy of continuous improvement, we reserve the right to change technical specifications without prior notice. Expose yourself to addictive high-end hi-fi today CD Player XXII Dual Mono Power-Amplifier XXVIII 1 Twin Burr-Brown PCM1704 mono 24 true multi-bit DACs fitted, providing very high resolution. 1 High quality custom-made parts featuring two large toroidal transformers and power supplies from each channel. 2 Highly optimised audio output circuitry with multiple stages of supply regulation. 2 Only carefully selected bipolar transistors used. Each channel has its own dedicated PCB. 3 Large toroidal power transformer with separate windings for CD transport mechanism and audio stages. High capacity supply for audio stages. 3 Sophisticated circuitry incorporating non-invasive overload/overheat protection. 4 Employment of a high-stability crystal clock reference and dedicated power supply regulator for transport and audio stages to ensure low jitter performance. 4 Bi-wire outputs using high-quality multi contact sockets. 5 RCA and XLR inputs. 5 High quality double sided PCB for optimum layout and screening. 6 High quality aluminium case and front panel. 7 Full-function remote control. 8 Three-year guarantee. 6 High quality aluminium case and front panel. 7 Three-year guarantee. “This is not the sort of amplifier that encourages ‘dead air’, in fact it’s addictively entertaining.” “What the Exposure XXXV does, it does exceedingly well, offering a beguiling mix of the best virtues of valve and solid state sound in one neat package.” Hi-Fi Choice, UK (XXIII Pre-Amplifier and XXVII Dual Mono Power Amplifier) Hi Fi World, UK “Very musically involving with superbly assured bass - powerful yet tuneful and controlled at once.” Hi Fi Choice, UK Pre-Amplifier XXIII Integrated Amplifier XXXV 1 Very large toroidal power transformer for audio stages. High quality custom-made parts used for power supply and regulation stages. 1 High, capacity, custom-made toroidal power transformer and power supply copacitors. 2 Optional plug-in MC or MM phono stage available, as used in top grade Exposure Dual Regulated Phono Pre-Amplifier XXVI. 2 Extruded front panel and sheet aluminium chassis to control resonance and stray electro-magnetic fields. 3 6 line inputs, with the option to convert 1 line input to internal phono stage card. 2 main out (RCA) and 1 XLR. 1 tape output selectable on front panel, including “off” position. 3 High quality capacitors used in the signal path. 4 Uniquely tuned short signal and power supply path PCB. 4 Full remote control of input selector, volume and mute. 5 Audio output stages utilising only discrete transistors. 5 Cascode circuitry and separate regulated supplies used for improved immunity within the power amplifier stage. 6 Components mounted on high quality double-sided glass fibre PCB. 6 Fast bipolar transistor output stage for dynamic and vivid performance. 7 High quality aluminium case and front panel. 7 Separate pre-amp output with class A buffer stage. 8 Bi-wiring compatible. 9 Can be used with optional internal plug in MC or MM phono board for vinyl replay. 8 Three-year guarantee. 1 0 Full-function remote control. 1 1 Three-year guarantee.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project