How to connect ScanSnap to one computer via wireless

How to connect ScanSnap to one computer via wireless
How to connect ScanSnap to one
computer via wireless access point
Preparation
Connect the computer to the wireless access point that will be used to connect to the ScanSnap. The
following information about the wireless access point is required for connecting the computer and the
wireless access point.
 Network name (SSID)
 Security key (password)
The connected network can be confirmed or changed from the following screen.
How to connect
This procedure is applicable if ScanSnap Manager has not been installed into the computer yet. Install
ScanSnap Manager from Setup DVD and follow the instructions of the wireless network setup wizard
that appears afterwards.
1/12
1
2/12
3/12
4/12
Hint
Be careful not to close the cover (feed
guide).
2
5/12
6/12
Hint
When the following screen appears, refer
to ”If the computer has not been connected
to the wireless LAN yet”
7/12
3
8/12
Hint
It may take some time to display the successful
connection screen depending on the computer
performance.
9/12
Follow the procedure 1 to 3 on the screen.
10/12
4
11/12
12/12
Scan a document with the ScanSnap confirm the connection.
Hint
 With ScanSnap Wireless Setup Tool, you can configure the wireless settings to connect the
ScanSnap to the wireless LAN anytime. ScanSnap Wireless Setup Tool is installed with
ScanSnap Manager.
How to run ScanSnap Wireless Setup Tool:
1
Connect ScanSnap and the computer via USB cable.
2
Open the cover (feed guide) to power on the ScanSnap, and turn on the Wi-Fi switch.
3
Go to Finder sidebar and select [Applications] > [ScanSnap] > [ScanSnap Wireless Setup Tool].
 ScanSnap Wireless Setup Tool runs.
4
Click the [Wireless Network Setup Wizard] button in the main menu.
 Wireless network setup wizard runs. It starts with the screen of 4/12.
 It may take some time to run ScanSnap Wireless Setup Tool. If it does not run, restart the
computer and run the tool again.
5
If the computer has not been connected to the wireless LAN yet
1/3
1
2
2/3
Hint
Enter the security key of the wireless
access point.
1
2
3/3
After the screen on the left appears, it
returns to the screen of 8/12.
6
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising