Scania R -, P -, G -Serie – Direct V ehicle CAN b u s

Scania R -, P -, G -Serie – Direct V ehicle CAN b u s
Z
W
X
Y
S1
Power
continu
Power
ignition
GND Black
Aux 4
Aux 3
Aux 2
Aux 1
J1708+ 2
J1708- 2
J1708+ 1
J1708- 1
K/L-Line2
K-Line2
K/L-Line1
K-Line1
CAN4-H
CAN4-L
CAN3-H
CAN3-L
CAN2-H
CAN2-L
CAN1-H
CAN1-L
Vehicle
spec.
DATAcliQ
6
DATAcliQ
5
DATAcliQ
4
DATAcliQ
3
DATAcliQ
2
DATAcliQ
1
CANcliQ
OBD
V
CAN LOW
T
U
CAN HIGH
1
RD
BK
S
GN
YE
R
WH
Power on Ignition (KL15) :
Free terminals with Green wires (Green
arrow).
Warning! CANcliQ or DatacliQ closes only once. Please repower the Squarell Device after the installation is completed. Please connect Squarell devices to a 10V to 48V power supply. Please use certified crimping tools to connect the wires.
Version 18022013 ENG
Copyright © Squarell 2012
O
N
M
L
K
J
I
Continuous Power (KL30) :
Free terminals with Red wires (Red arrow).
H
For Direct Connections:
Unlock connector slide by a screwdriver at
orange arrow and place the wires to the free
terminal on
Column 1 to 3 CAN Low (white)
Column 5 to 7 CAN High (yellow)
Ground (KL31) :
Free terminals. (black arrow)
G
Connections at backside of fuse box.
F
Untwist White and Yellow wires,
Place Scania Yellow wire in CAN High slot
Place Scania White wire in CAN Low slot
Close CANcliQ.
E
Power + Ground
D
CANbus
C
Blue connector at door side with twisted
Yellow and White wires. Connector can be
hidden inside wiring loom.
© Squarell 2011
B
Location
At passenger side
Open fusebox
Remove 2 screws
Turn open Fusebox
© Squarell 2011
© Squarell 2011
A
© Squarell 2011
Scania R-, P-, G-Serie – Direct Vehicle CANbus
P
Q
7
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising