Workman® MD/MDX/MDX-D/MDE

Workman® MD/MDX/MDX-D/MDE
Workman
MD/MDX/MDX-D/MDE
®
f
e
a t
u
r
e
s
• SRQ (Superior Ride Quality):
TM
– F ront suspension Independent
A-Frame design with coil-over
shock absorbers (All models)
The hard work shouldn’t start
until you get to the job site.
TM
–R
ear suspension Swing Arm
design with coil-over shocks
(MD, MDX & MDX-D models)
•P
atented Active in Frame twister
pivot joint for enhanced stability
and traction
TM
The new Workman MD Series with SRQ combines a coil-over shock absorber
®
TM
suspension design with an Active In Frame twister joint. These features deliver
TM
superior ride quality for optimum operator comfort and control. The hefty
payload capacity and four-wheel hydraulic brakes combine with SRQ to
provide enhanced productivity to tackle the toughest jobs. Experience the
Workman MD Series with SRQ. The better way to get your job done.
he capacity to get more jobs
•T
done in less time:
1,200 lb total capacity – MDE
1,250 lb total capacity – MD
1,650 lb total capacity – MDX/MDX-D
• F our-wheel hydraulic brakes for
authoritative stopping power
• E xtended run batteries and
regenerative braking for a longer
per charge work capacity and
whisper-quiet operation (MDE model)
• N ew injection-molded body styling
•P
roven durability of steel diamond plate
floorboard, rotomolded plastic bumper,
dash and cargo bed
Call your Toro distributor at 800-803-8676
Workman MD/MDX/MDX-D Specifications*
®
WORKMAN MD, MODEL 07266 /
WORKMAN MD (CARB Compliant)
MODEL 07279
Engine
SRQ System
TM
Front suspension
Rear suspension
Ground speed
Brakes
Frame
Ground Clearance
Tires
fuel capacity
dimensions
turning clearance
circle
Instrumentation
cargo bed size
total VEHICLE
capacity
cargo bed
PAYLOAD capacity
trailer Towing
Capacity
optional
accessories
warranty
357 cc, air-cooled, single-cylinder,
Yamaha . Meets 2011 EPA & CARB
exhaust & evaporative emissions
regulations.
®
WORKMAN MDX, MODEL 07273
WORKMAN MDX-D, MODEL 07359
480 cc, air-cooled, two-cylinder, Briggs
& Stratton Vanguard . Meets 2011
EPA & CARB exhaust & evaporative
emissions regulations.
®
600 cc, liquid-cooled, 2-cylinder,
Kubota diesel
®
®
Active In-Frame™ twister pivot joint, front and rear suspension.
Independent "A"-Frame with coil over shock absorbers.
Trailing arm with coil over shock absorbers.
16 mph (25.6 km/h) governed.
16 mph (25.6 km/h) governed. Optional 20 mph (32 km/h) requires ROPS and seatbelts.
Front wheel hydraulic disc. Rear wheel hydraulic drum.
Welded steel channel and tube in body construction. Frame surfaces are dipped e-coat. Body and bed constructed of dent and
corrosion-resistant polyethylene.
Front: 10" (25.4 cm), Rear: 7" (18 cm)
Front: 22 x 9.5-10, 4-ply,
Rear: 22 x 9.5-10, 4-ply.
Front: 22 x 9.5-10, 4-ply, Rear: 24 x 12-10, 4-ply. Optional all-terrain tires
7 gallons (26.5 liters)
WidthLength
59" (150 cm)
117.75" (299 cm)
Wheel Base
81" (205.7 cm)
Inside rear tire: 87" (221), outside front tire: 257" (653 cm).
Hour meter, oil pressure, glow plug,
coolant temperature, battery charge
indicator lights and accessory power
port. Dash has 2 cup holders, radio
holder and glove box storage.
Hour meter, low oil pressure warning light, accessory power port.
Dash has 2 cup holders, radio holder and glove box storage.
Length: 49" (124 cm), Width: 52" (132 cm), Height: 10" (25 cm), double walled, polyethylene.
1,250 lbs. (567 kg)
1,650 lbs. (750 kg)
850 lbs. (386 kg)
1,250 lbs. (567 kg)
400 lbs. (182 kg) trailer, 50 lbs. (23 kg)
tongue weight with standard hitch.
400 lbs. (182 kg) trailer, 50 lbs. (23 kg) tongue weight with standard hitch.
800 lbs. (363 kg) trailer, 100 lbs. (45 kg)
tongue weight with heavy-duty tow hitch.
1,200 lbs. (545 kg) trailer, 100 lbs. (45 kg) tongue weight with heavy-duty tow hitch.
Canopy, Solid Folding Windshield, Electric Bed Lift, HD Bumper, Brush Guard, Rahn Groomer, ROPS, Brake/Tail/Signal Light Kit,
Deluxe Hard Cab, Snow Plow, Deluxe Refreshment Center, Heater Kit, HD Trailer Hitch.
®
Two-year or 1500 hour limited warranty. Refer to the Operator’s Manual for further details.
*Specifications and design subject to change without notice. Products depicted in this literature
are for demonstration purposes only. Actual products offered for sale may vary in design, required
attachments and safety features. Consult your local Toro Distributor.
Workman MDE Specifications*
®
WORKMAN MDE, MODEL 07299
motor
SRQ System
TM
Front suspension
Max speed
Brakes
Transaxle
Ground Clearance
Tires
Batteries
Controller
charger
instruments/dash
dimensions
Steering
turning clearance
circle
Frame
cargo bed size
total VEHICLE capacity
48-volt DC motor with external fan.
Active In-Frame™ twister joint, front suspension.
Independent "A"-Frame with coil over shock absorbers.
16 mph (25.6 km/h) with fully charged batteries. Economy/supervisor mode limits maximum speed to 12 mph (19.2 km/h).
Front wheel: hydraulic disc. Rear wheel: hydraulic drum. Complemented with regenerative motor braking.
16.99 to 1 ratio with helical gears. Direct drive double reduction with differential.
Front: 10" (25.4 cm). Rear: 7" (18 cm).
Front: 22.5 x 9.5-10, 4-ply. Rear: 22 x 9.5-10, 4-ply
Eight, 6-volt heavy-duty T145. 145 min. @ 75 amps.
500 amps max. 48-volt with regenerative motor braking, includes roll away indicator, thermal cutback, sealed/potted, status
indicator light.
Remote charger with drive inhibit on AC connect. 115 volt AC +/- 10% input, 48 volt DC (nominal) 17-amp output. 230 volt AC
input for Europe, 48-volt DC (nominal) 17-amp output.
Battery discharge indicator, hour meter, headlight switch, on/off ignition key switch, accessory power port, supervisor speed
selector switch. The dash has 2 cup holders, radio holder and glove box storage area.
WidthLength
59" (150 cm)
119.75" (304 cm)
Wheel Base
83" (211 cm)
Height
50" (127 cm)
Manual, pinion and sector gear system with ergonomically positioned non-adjustable column. Steering wheel has
3 turns lock-to-lock and 17.2 to 1 ratio with a 13.75" (34.93 cm) diameter wheel.
Inside rear tire: 83" (211 cm), outside front tire: 260" (660 cm).
Welded steel channel and tube in body construction. Frame surfaces are dipped e-coat. Body and bed constructed of dent and
corrosion resistant polyethylene.
Length: 49" (124 cm), Width: 52" (132 cm), Height: 10" (25 cm), double walled, polyethylene.
1,200 lbs. (545 kg).
cargo bed
PAYLOAD capacity
800 lbs. (363 kg)
trailer Towing
Capacity
400 lbs. (182 kg) trailer, 50 lbs. (23 kg) tongue weight with standard hitch.
800 lbs. (363 kg) trailer, 100 lbs. (45 kg) tongue weight with heavy-duty tow hitch.
Optional
Accessories
warranty
48-volt Electric Bed Lift, 48-volt Rear Lift, Canopy, Folding/Solid Windshield, HD Trailer Hitch, Deluxe Cab, HD Front Bumper, Brush
Guard, Rahn Groomer, 12-volt Adapter Kit, ROPS, Brake /Tail/Signal Light Kit.
®
Two-year or 1,500 hour limited warranty. Refer to the Operator’s Manual for further details. Battery warranty through battery manufacturer.
©2011 The Toro Company. All rights reserved.
8111 Lyndale Ave. S.
Bloomington, MN 55420-1196
*Specifications and design subject to change without notice. Products depicted in this literature
are for demonstration purposes only. Actual products offered for sale may vary in design, required
attachments and safety features. Consult your local Toro Distributor.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising