McIntosh Labs: MHT100

McIntosh Labs: MHT100
McIntosh Labs: MHT100
(tuner in US
Copy from:
Quick Facts
The new McIntosh MHT100 A/V Receiver. All the wonderful features of the highly
acclaimed MX132 preamp/tuner are incorporated next to six 100-watt (into 4
ohms) amplifiers with McIntosh's exclusive Power Guard circuitry for the ultimate in
Dolby Digital and DTS excitement (both with matrix rear-channel-center-channel
capability). Second zone architecture with two additional on-board 100-watt
channels makes multiroom expansion as easy as installing speaker wires.
About This Product
Home Theater Control Center/Processor/Amplifier
Zone A (theater) 6 x 100 watts (4 ohms)
Zone B (multiroom): 2 x 100 watts
7 Power Amp Input Connections
Exclusive McIntosh Power Assurance System
Component Video Switching
Optional AM/FM Tuner Module with high performance RAA1 remote AM
7 audio/video source selections with re-assignable naming
6 assignable digital audio inputs (3 coaxial, 3 optical)
24-Bit DSP Dolby Digital, Pro Logic and DTS decoders
S-video and composite video connections
Zone A & B IR inputs
Remote Operation of lights, screens and drapes with McIntosh HC1 Home
Glass front panels with illuminated nomenclature
Turn-On Delay
Independent Listen and
Record Selection
Automatic mode switching
between Dolby Digital, Pro
Logic and DTS
Glass Front Panel with
Illuminated Nomenclature
McIntosh Labs: MHT100
Automatic Input Level
Control (AILC)
Auto-memory recall of last
mode setting for each input
Sentry Monitor
Power Guard
Fanless Convection Cooling
Dolby Prologic
Dolby Digital
Loudness Control
Type of Remote
Programmable Or Learning Remote
Illuminated Remote Control
Display (on remote)
On-Screen Set-Up Menu
Record Output Selector
Enhanced Bass Management
Multi Source Capability
Multi Room Capability
Control Data Outputs
Ultra-Low Distortion
Wide Power Bandwidth
Component Video Input
S-Video Input
Composite Video Input
Coaxial Digital Input
Optical Digital Input
7.1 Channel Input
Coaxial Digital Output
Component Video Output
S-Video Output
Optical Digital Output
Gold Plated Terminals
Frequency Response
20 Hz to 20 KHz +0 / -0.5 dB
Input Impedence
20k ohms
Input Sensitivity
Line Output Voltage
Bass Control
+/- 10 dB at 100 Hz
Treble Control
+/- 10 dB at 10 KHz
Power Output 8 ohms
80 w @ 8 ohms
Power Output 4 ohms
100 w @ 4 ohms
Power Bandwidth
20 Hz to 20 KHz
Dynamic Headroom
1.8 dB
Total Harmonic Distortion
0.05 %
Intermodulation Distortion
0.05 %
Signal to Noise Ratio
Warranty (parts)
Warranty (labor)
92 dB
36 month(s)
36 month(s)
9.5 in. H x 17.5 in. W x 20 in. D (24.1 cm. H x 44.5 cm. W x 50.8 cm.
92 lbs. (41.8 kg.)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF