DeFender M1 / M2

DeFender M1 / M2
DeFender M1 / M2
User's Guide
GB
DeFender M1
Tool required: 4 mm Allen key
Press to
install / release
Press to
install / release
Wedge
Set
F
(Front)
F
(Front)
R
(Rear)
R
(Rear)
Fits ø19.6 - ø26 mm
Fits ø 27.7~ ø35 mm
thickness
60 mm
thickness
60 mm
4mm
Allen key
Recommended Torque
2-4 Nm (17-35 in. lbs)
Back view
Back view
CAUTION:
When installing DeFender M1 with
suspension forks, make sure no part of
the fork comes in contact with the
DeFender M1 during its travel length.
Otherwise damage to your bike or
DeFender M1 may occur and it may also
cause bodily injury.
DeFender M1 fits most standard
front forks. However, it will not
fit forks with a crown thickness
over 60 mm (2.36") and is not
designed to be used with the 1.5"
headset standard.
DeFender M1
IMPORTANT NOTES
Fits ø19.6 ~ ø26 mm
Fits ø 27.7~ ø35 mm
Prepare to Ride
DeFender M1 / M2
User's Guide
For Rear Suspension Bike
DeFender M2
Tool required: 4 mm Allen key
Wheel Travel
WARNING
When adjusting the angle of
DeFender M2, make sure the
space between DeFender M2
and the tire is larger than wheel
travel of the bike. Incorrect
angle may cause damage to
DeFender M2, your bike, or
potentially cause bodily harm.
Wheel Travel
SLIP JOINT CLAMP FITS ø25.4~ø31.2 mm and ø30.8~34.9 mm
ø30,8~34,9 mm
ø25,4~ø31,2 mm
Always keep the quick release
lever in the proper closed
position when DeFender M2
is mounted on bike.
ANGLE ADJUSTMENT
Toothed Nut
Angle Adjusting Bolt
Toothed Nut
4mm
Allen key
4mm
Allen key
Angle Adjusting Bolt
WARNING
Adjust the angle of
DeFender M2 by
loosening the angle
adjusting bolts and
retightening the
bolts once the
correct angle is
achieved. Do not
loosen the angle
adjusting bolt more
than 6
counterclockwise
rotations or the
toothed nut
assembly will be
disassembled and
may be damaged.
Recommended Torque:
2-4 N.m (17~35 in. lbs.)
WARRANTY
2-year Warranty: All mechanical components against manufacturer defects only.
Warranty Claim Requirements
To obtain warranty service, you must have your original sales receipt. Items returned without a sales receipt will assume that the warranty begins on the date of manufacture.
All warranties will be void if the product is damaged due to user crash, abuse, system alteration, modification, or used in any way not intended as described in this operating
manual.
* The specifications and design are subject to change without notice.
Topeak products are available only from professional bicycle shops.
Please contact your nearest Topeak authorized bicycle dealer for any questions. For customers in the USA, call: 1-800-250-3068, Website: www.topeak.com
Copyright © Topeak, Inc. 2009
M-TC9617-18-GB 11/09
Prepare to Ride
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising