Assembly Instructions

Assembly Instructions
Read all instructions before assembly and use.
KEEP INSTRUCTIONS FOR FUTURE USE.
ADULT ASSEMBLY REQUIRED
Due to the presence of small parts during assembly, keep out of
reach of children until assembly is complete.
4 in 1 Crib
Consumer Care:
www.DeltaChildren.com
Delta Children’s Products
114 West 26th Street
New York, NY 10001
Tele.212-645-9033
Style #:___________
Lot:___________
Date:___________
THIS PRODUCT IS NOT INTENDED FOR
INSTITUTIONAL OR COMMERCIAL USE.
A
Conforms to
ASTM F1169 Full
Size Crib & F1821
Safety Standards
REV
When contacting Delta Consumer Care please reference the above information. Before contacting Delta
Consumer Care please ensure that the information above matches the information found on the label on
the Crib End bottom rail, please reference the information found on the product when contacting Delta
Consumer Care.
To register your product for important safety alerts and updates to your product please visit
www.DeltaChildren.com and click on Product Registration.
APRIL 4, 2014, 24894, R0
©2014 DELTA ENTERPRISE CORP.
CAUTION:
ANY MATTRESS USED IN THIS CRIB SHALL
BE AT LEAST 27 1/4 BY 51 5/8 IN. WITH A
THICKNESS NOT EXCEEDING 6 IN.
WARNING:
*Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional padding under an
infant.
*Failure to follow these warnings and the assembly instructions could result in serious injury or death. DO NOT use
this crib if you cannot exactly follow the accompanying instructions.
*To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless
otherwise advised by your physician.
*Strangulation Hazard: STRINGS CAN CAUSE STRANGULATION! Do not place items with a string around a
child's neck, such as hood strings or pacifier cords. Do not suspend strings over a crib or attach strings to toys.
*Strangulation Hazard: To help prevent strangulation tighten all fasteners. A child can trap parts of the body or
clothing on loose fasteners.
*Strangulation Hazard: Do not place crib near window or patio door where cords from blinds or drapes may
strangle a child.
*Fall Hazard: When child is able to pull to a standing position, set mattress to lowest position and remove bumper
pads, large toys and other objects that could serve as steps for climbing out. This crib has an adjustable mattress
support. For the convenience of the parent when the baby is very small, the mattress support may be used in the
highest position. Important: with the mattress support and mattress in the highest position, be absolutely sure that
the top of the front crib side is at least 3 inches higher than the top surface of the mattress. If it is not, lower the
mattress support and the mattress to the next highest position.
*Fall Hazard: Stop using crib when child begins to climb out or reaches a height of 35in. (89cm), whichever occurs
first. The child should be placed in a youth or regular bed.
*Check this product for damaged hardware, loose joints, loose bolts or other fasteners, missing parts, or sharp edges
before and after assembly and frequently during use. Securely tighten loose bolts and other fasteners. Do not use
crib if any parts are missing, damaged or broken. Contact Delta Children's Products for replacement parts and
instructional literature if needed. Do not substitute parts.
*Follow warnings on all products in a crib.
*If refinishing, use a non-toxic finish specified for children's products.
*Never use plastic shipping bags or other plastic film as mattress covers because they can cause suffocation.
*Infants can suffocate in gaps between crib sides and a mattress that is too small.
*Ensure a safe environment for the child by checking regularly, before placing the child in the crib, that every
component is properly and securely in place.
*To avoid head injury, do not allow any child to play underneath the crib.
*Never add an accessory such as a bassinet or changing table that extends over the sleeping area.
*In Canada Only - Use a crib mattress that is no thicker than 15 cm and is of such a size that, when it is pushed
firmly against any side of the crib, it does not leave a gap of more than 3 cm between the mattress and any part of
the sides of the crib. Do not use this crib for a child who can climb out of it or who is taller than 90 cm.
TODDLER BED
WARNING
INFANTS HAVE DIED IN TODDLER BEDS FROM ENTRAPMENT.
Openings in and between toddler bed parts can entrap head and neck of a small child.
NEVER use toddler bed with children younger than 15 months.
ALWAYS follow assembly instructions.
The maximum user weight is 50lbs (22.7kg)
WARNING
STRANGULATION HAZARD
NEVER place bed near windows where cords from blinds or drapes may strangle a child.
NEVER suspend strings over a bed.
NEVER place items with a string, cord, or ribbon, such as hood strings or pacifier cords,
around a child's neck. These items may catch on bed parts.
CAUTION
ENTRAPMENT HAZARD
To avoid dangerous gaps, any mattress used in this bed shall be a full-size crib mattress
at least 51 5/8 in (1310mm) in length, 27 1/4 in (690mm) in width and a max thickness of
6 in (150 mm).
NOTES ON ASSEMBLY:
-During the assembly process whenever using screws or bolts, check each by placing the screw/bolt on
the diagram of the item which is drawn actual size and design. Be sure to use the proper size and shape
specified in the instructions.
-To assemble this unit you may be required to place the unit on it’s side and face. It is strongly
recommended that assembly is done on a soft, non-abrasive surface to avoid damaging the finish.
NOTES ON USE:
Keep children and others safe by following these simple rules:
- Do not allow any child to play on furniture
- Do not allow climbing on any piece of furniture.
- Do not allow hanging from any piece of furniture.
- Always monitor your child’s activity when in the nursery.
NOTES ON CARE AND MAINTENANCE:
- Do not scratch or chip the finish.
- Inspect the product periodically, contact Delta Children's Products for replacement parts or questions.
- Do not store the product or any parts in extreme temperatures and conditions such as a hot attic or a
damp, cold basement. These extremes can cause a loss of structural integrity.
-To preserve the luster of the high quality finish on your product, it is recommended to place a doily or
felt pad under any items you place on the finish.
-Clean with a damp cloth, then a dry cloth to preserve the original luster and beauty of this fine finish.
-Do not use abrasive chemicals.
-Do not spray cleaners directly onto furniture.
-Lift slightly when moving on carpeting to prevent leg breakage.
-Use of a vaporizer near furniture will cause wood to swell and finish to peel.
3
PARTS: MAKE SURE THAT ALL PRE-ASSEMBLED PARTS ARE TIGHT.
A. Back Rail x 1
Part # 24889
B. Bottom Back Rail x 1
Part # 24890
F. Left Back Post x 1
Part # 24887
C. Front Rail x 1
Part # 24891
G. Right Back Post x 1
Part # 24888
H. Stabilizer Bar x 1
Part # 24892
LEFT INSIDE
BOTTOM LABEL
PRODUCT LABEL
D. Left Crib Side x 1
Part # 24885
RIGHT INSIDE
BOTTOM LABEL
E. Right Crib Side x 1
Part # 24886
J. Mattress Support x 1
Part # 24242
POUCH ATTACHED TO MATTRESS SUPPORT
- KEEP INSTRUCTIONS IN THIS POUCH
AFTER ASSEMBLY.
WARNINGS RELATED TO THE SAFE USE OF
THIS CRIB ARE PRINTED ON THE POUCH.
4
PARTS: HARDWARE KIT IS PART #24893-988 FOR COLOR 028. SEE FRONT COVER.
K. M6 x 75 mm Bolt x 8
Part # 5472
L. M6 x 55 mm Bolt x 4
Part # 5468
No drills necessary.
Do not use power
screwdriver.
Flat Head Screwdriver
(not supplied)
M. M6 x 18 mm Bolt x 4
Part # 5763
N. M6 x15mm Barrel Nut x 12
Part # 5478
M4 Allen Wrench Supplied
Part # 1177
P. Φ4x30 mm Metal Pin x 4
Part # 5493
5
Section 1: Crib Assembly
Step 1
Parts and tools required to complete step.
M4 Allen Wrench
Supplied
G. Right Back Post x 1
A. Back Rail x 1
N. M6 x15mm Barrel Nut x 4
B. Bottom Back Rail x 1
K. M6 x 75 mm Bolt x 4
F. Left Back Post x 1
Attach (1) Left Back Post (Part F) and (1) Right Back Post (Part G) to (1) Back Rail (Part A) and
(1) Bottom Back Rail (Part B) using (4) M6 x75mm Bolts (Part K) and (4) M6 x15 mm Barrel Nuts
(Part T). Tighten with the M4 Allen Wrench. Use the Flat Head Screwdriver to hold the Barrel Nut in
the proper alignment.
K
N
A
F
N
K!
C
BA
K
K
K!
C
BA
G
F
N
B
K
K!
N
K
C
BA
N
6
Section 1: Crib Assembly
Step 2
Parts and tools required to complete step.
L. M6 x 55 mm Bolt x 4
N. M6 x15mm
Barrel Nut x 4
LEFT INSIDE
BOTTOM LABEL
PRODUCT LABEL
From Step 1
RIGHT INSIDE
BOTTOM LABEL
E. Right Crib Side x 1
D. Left Crib Side x 1
M4 Allen Wrench
Supplied
Attach (1) Left Crib Side (Part D) and (1) Right Crib Side (Part E) to the assembly from step 1 using
(4) M6 x55 mm Bolts (Part L) and (4) M6 x15 mm Barrel Nuts (Part N). Tighten with the M4 Allen
Wrench. Use the Flat Head Screwdriver to hold the Barrel Nut in the proper alignment.
L
N
L
L
E
N
N
L
D
N
7
Section 1: Crib Assembly
Step 3
Parts and tools required to complete step.
M4 Allen Wrench
Supplied
J. Mattress Support x 1
From Step 2
M. M6 x18 mm Bolt x 4
Attach the Mattress Support (Part J) in all corners using (1) M6 x18 mm Bolt (Part M) in each corner.
Tighten with the M4 Allen Wrench.
UP
The ! Warnings printed on the pouch attached to the
mattress support must face up, the springs must face up.
This crib has (3) adjustment positions, use the highest only
for new borns, move the mattress down as the child grows.
!
WARNING:
Fall Hazard: When child is able to pull to a standing position,
set mattress to lowest position and remove bumper pads,
large toys and other objects that could serve as steps
for climbing out.
! WARNINGS ON POUCH MUST FACE UP.
ALL CORNERS
M
J
8
Section 1: Crib Assembly
Step 4
Parts and tools required to complete step.
M4 Allen Wrench
Supplied
C. Front Rail x 1
N. M6 x15 mm Barrel Nut x 4
H. Stabilizer Bar x 1
K. M6 x 75 mm Bolt x 4
P. Φ4x30 mm Metal Pin x 4
From Step 3
1. Attach (1) Front Rail (Part C) to (1) Stabilizer Bar (Part H) using (2) Φ4x30 mm Metal Pins (Part P).
2. Insert (2) Φ4x30 mm Metal Pins (Part P) into the hole in each of the Stabilizer Bar (Part H).
3. Attach (1) Front Rail (Part C) and (1) Stabilizer Bar (Part H) to the assembly from step 3 using (4)
M6 x 75 mm Bolts (Part K) and (4) M6 x 15mm Barrel Nuts (Part N). Tighten with the M4 Allen
Wrench. Use the Flat Head Screwdriver to hold the Barrel Nut in the proper alignment.
C
P
K
P
N
H
y
ntl
Pu
e
ll G
P
P
K
K
N
K
H
N
ll
Pu
C
N
tly
n
Ge
K
N
9
Section 1: Crib Assembly
Step 5
Parts and tools required to complete step.
Read all instructions before assembly and use.
KEEP INSTRUCTIONS FOR FUTURE USE.
ADULT ASSEMBLY REQUIRED
Due to the presence of small parts during assembly, keep out of
reach of children until assembly is complete.
4 in 1 Crib
Assembly Instruction
Booklet
Consumer Care:
www.DeltaChildren.com
Delta Children’s Products
114 West 26th Street
New York, NY 10001
Tele.212-645-9033
Style #:___________
Lot:___________
Date:___________
THIS PRODUCT IS NOT INTENDED FOR
INSTITUTIONAL OR COMMERCIAL USE.
A
Conforms to
ASTM F1169 Full
Size Crib & F1821
Safety Standards
REV
When contacting Delta Consumer Care please reference the above information. Before contacting Delta
Consumer Care please ensure that the information above matches the information found on the label on
the Crib End bottom rail, please reference the information found on the product when contacting Delta
Consumer Care.
To register your product for important safety alerts and updates to your product please visit
www.DeltaChildren.com and click on Product Registration.
MARCH 18, 2014, 24894, R0
©2014 DELTA ENTERPRISE CORP.
Store the assembly instruction booklet in the pouch attached to the mattress support. Store all parts
and tools separately, in a safe place.
Read all
KEEP instructions before
INSTR
assem
UCTIO
bly and
NS FOR
use.
ADULT
FUTUR
ASSEMBLY
Due to
E USE.
the
reach of presence of
small parts
children
until assembly
during
assembly
is complete
, keep
out of
.
REQUIRE
D
4 in 1 Crib
Consum
www.Delt er Care:
aChildre
Delta Childre
n.com
114 West n’s Produc
New York,26th Street
Tele.21 NY 10001
ts
2-645-9
033
THIS PRODU
CT IS NOT
INSTITU
TIONAL
INTEND
OR COMME
ED FOR
RCIAL
USE.
Conforms
to
ASTM
F1169
Full
Size Crib
& F1821
Safety
Standards
Style #:
______
_____
Lot:___
Date:___ ________
______
__
A
REV
When
contac
ting
Consu
mer Care Delta Consu
mer Care
the Crib
please
ensure
End bottom
please
Consu
rail, please that the inform reference the
mer Care.
above
ation above
referen
information.
ce the
To registe
information matches the
Before
inform
www.D r your produc
contac
found on
eltaCh
ting Delta
the producation found on
ildren.comt for important
the label
t when
safety
and click
contac
on Produ alerts and update
ting Delta on
ct Regist
s to your
ration.
produc
t please
visit
MARCH
18,
2014, 24894,
R0
©2014
DELTA
ENTERP
RISE CORP.
AI BAG
WARNING: SEE PAGE 2 FOR INFORMATION
10
Section 2: Toddler Bed Conversion
Step 1
Parts and tools required to complete step.
M4 Allen Wrench
Supplied
Finished Crib
Remove the Front Rail and Stabilizer Bar installed in Step 4 of Section 1 crib assembly.
K
N
ll
Pu
K
K
N
N
H
ll
Pu
tly
n
Ge
C
tly
n
Ge
K
N
11
Section 2: Toddler Bed Conversion
Step 2
Parts and tools required to complete step.
M4 Allen Wrench
Supplied
H. Stabilizer Bar x 1
P. Φ4x30 mm Metal Pin x 2
N. M6 x15 mm Barrel Nut x 2
K. M6 x 75 mm Bolt x 2
From Section 2 Step 1
Attach (1) Stabilizer Bar (Part H) to the assembly from section 2 step 1 using (2) Φ4x30 mm Metal Pins
(Part P), (2) M6 x75mm Bolts (Part K) and (2) M6 x15 mm Barrel Nuts (Part N). Tighten with the M4
Allen Wrench. Use the Flat Head Screwdriver to hold the Barrel Nut in the proper alignment.
BOTH ENDS
K
N
K
H
K
P
N
H
N
12
Section 2: Toddler Bed Conversion
Step 3
WARNING:
SEE PAGE 3 FOR
TODDLER BED WARNINGS
The mattress support must be in the lowest position.
Store all hardware safely.
Read all warnings on page 3.
As shown, use as a day bed or love seat sofa.
Do Not use without stabilizer bar installed.
Stabilizer bar must be used when converted
to a toddler bed.
A toddler bed guardrail is available for this
crib.
Please see your crib retailer, visit
www.DeltaChildren.com or contact Delta
Consumer Care for more information.
This crib uses Delta Style # 0080 Guardrail.
13
Section 3: Full Size Bed Conversion
Step 1
Parts and tools required to complete step.
M4 Allen Wrench
Supplied
You have the option to convert the crib to a Full Size Bed. Simply follow steps in reverse order to
disassemble the crib. Then remove the Rear Legs from the Left Crib Side and Right Crib Side with the
M4 Allen Wrench as shown.
Store all parts and hardware in a safe place.
L
L
L
L
14
Section 3: Full Size Bed Conversion
Step 2
Parts and tools required to complete step.
M. M6 x18 mm Bolt x 4
From Section 3 Step 1
M4 Allen Wrench
Supplied
Attach Bed Frame to the Headboard (From Section 3 Step 1) using (4) M6x18mm Bolts (Part M).
Follow all instructions supplied with the Bed Frame. Note: Bed Frame system is not included, This item
uses Delta item 0040 bed frame, please see retailer or contact Delta Consumer Care for information or
with questions."
15
Consumer Care:
www.DeltaChildren.com
Delta Children’s Products
114 West 26th Street
New York, NY 10001
Tele.212-645-9033
Warranty:
This Delta Crib is warranted to be free from defects for a period
of 1 year from the date of purchase under normal use. This warranty extends
only to the original retail purchaser and is valid only when supplied with proof of
purchase, or if received as a gift, when the registration is on file with Delta.
To register your product for important safety alerts and updates to
your product please visit www.DeltaChildren.com
Please do not return this item to the store before contacting
us about missing parts or with any questions.
To report a problem, please log on to www.DeltaChildren.com and
click the Consumer Care Tab, or contact us by phone at
(212) 645-9033.
In the event that you need to contact our customer service
department please have the Style Number and Lot Number available.
Use the space below to make note of those numbers. They can be
found on the label on the Crib End bottom rail.
STYLE No: 7630
COLOR
A
REV
FTY
Lot No. : _______________________
Pack Date:_____________________
Date of Purchase: _____________ (you should also keep your receipt)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising