Guide_iPhone application_SECURIX

Guide_iPhone application_SECURIX
iPHONE APPLICATION GUIDE (1)
SYSTEM DIAGRAM
SECURIX Mobile I allows you to access remote sites and monitor live video via network connection using the
Apple based iPod Touch or iPhone (iPhone OS 3.0 or later version) anytime from virtually anywhere.
INSTALLATION
1. Connect your iPod Touch or iPhone to your PC. Run the iTunes program on your PC and connect to iTunes Store.
2. Enter SECURIX in the search field at the top-right corner of the iTunes screen.
3. Install the SECURIX Mobile I program on your iPod Touch or iPhone, and run the program by touching the

(Messages): Touch to check push messages from the DVR.
 Connect: Touch to connect to a site to monitor.
 Camera: Touch to select a camera to monitor.
 Settings: Touch to register sites.
icon.
iPHONE APPLICATION GUIDE (2)
OPERATION
1. Touch the Settings button to register DVRs. Select Site List, and then enter the DVR’s information.
 Description: Enter the site name.
 Use DVRNS: If the DVR uses the DVRNS function, enable the Use DVRNS option. You can enter the name
registered on the DVRNS server instead of the IP address of the DVR. The DVR name you enter should match
the name set during the DVRNS setup on the DVR.
 Address, Port: Enter the IP address and port number of the DVR. If the DVR uses the DVRNS function, enable
the Use DVRNS option and enter the name registered on the DVRNS server instead of the IP address of the DVR.
 User ID, Password: Enter the user ID and password set on the DVR.
 Push: If the DVR uses the Push function, enable the Push option. The iPod Touch or iPhone tests the connection
to the DVR and enables the Push option when the connection succeeds. The iPod Touch or iPhone will receive
callback messages from the DVR.
NOTE: Check the Push function setting in the DVR and the Notification setting in the iPod Touch or
iPhone. Refer to the user manual of the DVR for details about the Push function setting in the DVR.
 The Push function setting in the DVR
1. Enter the Setup screen and move to the Network > Notification
menu.
2. Select the Callback tab.
3. Check that the Push function is enabled and properly set up.
 The Notification setting in the iPod Touch or iPhone
Touch the
(Settings) icon on your iPod Touch or iPhone → Touch Notifications → Check that Notifications is set to
On, and touch SECURIX → Check that Alerts is set to On.
iPHONE APPLICATION GUIDE (3)
Touching the Settings button and selecting DVRNS displays the DVRNS server information. You cannot change
the settings.
2. You can add other DVRs or delete a registered DVR by touching the Edit button in the Site List screen, or edit a
DVR’s information by selecting the DVR from the list.
or
EVENT NOTIFICATION
If the Push function is enabled and the SECURIX Mobile I program is not running, a notification box pops up when
an event is detected in the DVR. It allows you to check the callback messages from the DVR by running the SECURIX
Mobile I program.
If the Push function is enabled and the SECURIX Mobile I program is running, the notification box does not pop up
when an event is detected in the DVR and you can just check callback messages in the Messages list by touching the
(Messages) button.
iPHONE APPLICATION GUIDE (4)
1. Touch the View button, and the SECURIX Mobile I program runs. Touching the Close button closes the notification
box without running the SECURIX Mobile I program.
(Messages) button. The list of callback messages is displayed. If you touched the Close button
2. Touch the
when a notification box popped up, the callback message will not be displayed in the list. If more than one notification
box pops up, callback messages of all notification boxes except the last one will not be displayed in the list.
MONITORING
Touch the Connect button to connect to a DVR for monitoring. Selecting the DVR from the site list displays the
video from the DVR on the screen.
NOTE: The remote connection might fail if the DVR uses the SSL function. Refer to the user manual of the
remote DVR for details about the SSL function.
 Disconnect: Touch to release the connection to the DVR.
 Camera: Touch to select the camera to monitor. The list of cameras supported by the DVR is displayed.
Selecting a desired camera from the list and touching the Apply button displays video from the selected camera.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising