Controls with Freeze Protection
Pool & Spa Controls
Controls with Freeze Protection
One Circuit Control
Applications
• Filter pumps
• Water falls
• Water features
PF1103T
These Freeze Protection Controls are designed to protect the Pool or Spa equipment
and plumbing against freeze damage. They turn ON the pump and the heater when the
outdoor temperature drops below the temperature set by the user adjustable thermostat.
Models without timer connect to a timing or switching device and together, they control
operation of the equipment as well as protect it against freeze damage. Models with timer
provide both automation and protection for the equipment.
These controls can be installed outdoors and are designed to withstand extreme
temperatures, high humidity, rain and chemicals typically found around pools and spas.
One and Two Circuit Control Panels
Applications
• Filter pumps
• Filter pump-booster
pump combinations
• Pool-spa combinations
• Fountains
PF1202T
These heavy duty time controls are designed especially for pools with a cleaner, requiring
two interconnected time switches as well as freeze protection. They will automatically
control the filter pump and the booster pump, turn OFF the heater 20 minutes before the
filter pump shuts OFF and protect the equipment against freeze damage. In addition, they
have provision to install switches or GFCI receptacle on the side of enclosure. These
all-in-one pool controls reduce the cost of installation while providing for custom wiring
to satisfy special needs or local code requirements.
These controls can be installed outdoors and are designed to withstand extreme
temperatures, high humidity, rain and chemicals typically found around pools and spas.
www.intermatic.com
Controls with Freeze Protection
Pool & Spa Controls
One Circuit Controls with Freeze Protection
PF1103T
Model
Number
Description
Electrical
Input
Rating
H.P.
Shipping
Weight
PF1102
Thermostat only. For 240V installation.
240V
3
3.75 lbs.
PF1102M
Same as above, mechanism only.
240V
3
2.00 lbs.
PF1102T
Timer with thermostat. For 240V installation
240V
3
4.50 lbs.
PF1102MT
Same as above, mechanism only.
240V
3
2.50 lbs.
PF1103
Thermostat only. For 120/240V installation
120/240V*
1.5/3
3.75 lbs.
PF1103M
Same as above, mechanism only.
120/240V*
1.5/3
2.00 lbs.
PF1103T
Timer with thermostat.
For 120/240V installation.
120/240V*
1.5/3
4.50 lbs.
PF1103MT
Same as above, mechanism only.
120/240V*
1.5/3
2.50 lbs.
Case 0.034 inch drawn steel, electrostatically coated,
beige color. Hasp, with hole for lock, holds permanently
attached side-hinged door closed.
Size 9-3/8" (23.8 cm) high x 5-1/4" (14.0 cm) wide x 3-5/8"
(9.2 cm) deep.
Knockouts Two 1/2" – 3/4" combination knockouts
on the bottom, one on each side and one on the back.
Thermostat Range 45° – 32°F with 5 degrees differential.
Agency Approval CSA/C-US
*Neutral must be installed.
One and Two Circuit Control Panels with Freeze Protection
Model
Number
Description
Electrical
Input
Rating
H.P.
Shipping
Weight
PF1112T
For pools requiring one time switch
240V
3
8.0 lbs.
PF1202T
For pools with cleaner,
requiring two time switches
240V
3
10.0 lbs.
PF1222TB
Same as above with 4/8 breaker base
and heater protection
240V
3
17.0 lbs.
PF1202T
For additional trippers (2 “ON” 2 “OFF” per pack), order No. 156TN10398A.
PF1112T and PF1202T
Case 12" (30.5 cm) high x 12" (30.5 cm) wide x 4-1/4" (10.8 cm) deep, 0.048" steel with electrostatically applied light beige finish.
Knockouts Five combination 1/2" – 3/4" and two combination 3/4" – 1" knockouts on the bottom. One combination 1/2" – 3/4" on the
left side and one combination 3/4" – 1" on the back. One knockout 1-3/4" x 2-3/4" on the right side for mounting switches or GFCI.
Time Switch Rating 40 Amp. resistive each pole 120–240 VAC, 40 Amp. tungsten, inductive or 1000 VA pilot duty each pole 120–240 VAC
2 H.P. (24 FLA) – 120 VAC; 5 H.P. (28 FLA) – 240 VAC.
Thermostat Range 45° – 32°F with 5 degrees differential.
Agency Approval CSA/C-US
PF1112TB
Case 16-1/2" (41.9 cm) high x 10-7/8" (27.6 cm) wide x 4-1/4" (10.8 cm) deep, 0.048" steel with electrostatically applied beige finish.
Knockouts Two 1/2", three combination 1/2"– 3/4" and two combination 3/4" – 1" knockouts on the bottom. One combination 3/4" – 1" on the
left side. Four 1/2", three combination 1/2" – 3/4" on the back. One 1-3/4" x 2-3/4" knockout on the right side for mounting switches or GFCI.
Panel Rating 100 Amp. max., 120-240 VAC or 120-208 VAC single phase.
Time Switch Rating 40 Amp. resistive each pole 120–240 VAC, 40 Amp. tungsten, inductive or 1000 VA pilot duty each pole 120–240 VAC
2 H.P. (24 FLA) – 120 VAC; 5 H.P.(28 FLA) – 240 VAC.
Thermostat Range 45° – 32°F with 5 degrees differential.
PF1222TB
www.intermatic.com
Intermatic Incorporated Spring Grove, Illinois 60081-9698
©2004 Intermatic, Inc. Printed in U.S.A.
300PS10111
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising