How to establish PPTP/L2TP tunnel with iPhone to Vigor

How to establish PPTP/L2TP tunnel with iPhone to Vigor
How to establish PPTP/L2TP tunnel with iPhone to Vigor router
Take Vigor2950 as an example.
VPN Setting on Vigor Router
z
Create remote-dial in account
1.
On Vigor’s web configureation page, click VPN and Remote access >>Remote Dial-in User. Select
an index for creating user account.
2.
After entering the page, check Enable this account. Then, type username and password.
3.
Check PPTP and L2TP as Dial-In type, and then select OK.
1
z
Create VPN IKE Pre-Shared key
1.
On Vigor’s web configuration page, open VPN and Remote Access>> IPsec General Setup.
2.
Type Pre-Shared key and confirm Pre-shared key again. Then select OK.
3Gs Settings on IPhone 3G / iPhone
z
Connect iPhone to Vigor router through 3G for accessing Internet
z
PPTP/L2TP Setting on iPhone
Configuration for PPTP
1.
In IPod touch/IPhone home page, press Settings. Open General >> Network and select VPN Setting
>> Setting.
2
2.
In VPN setting page, click PPTP. Type PPTP VPN Server IP address, account and password, then
press Save.
Configuration for L2TP
1.
In IPod touch/IPhone home page, press Settings. Open General >> Network and select VPN Setting
>> Setting.
2.
In VPN setting page,Click PPTP >> Type PPTP VPN Server IP address、Username 、Password and
IKE key >> Press Save .
In VPN setting page, click L2TP. Type L2TP VPN Server IP address, account and secret number, then
press Save.
3
After completing VPN setting, please switch ON VPN connection, VPN connection status will be shown as
below.
PPTP VPN connection on iPhone
PPTP VPN connection on Vigor2950
4
L2TP VPN connection on iPhone
L2TP VPN connection on Vigor2950
5
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement