Weather Forecaster - Holman Industries

Weather Forecaster - Holman Industries
Weather
Forecaster
WS5019
INSTRUCTION MANUAL
WS5019 Weather Forecaster.indd 1
25/07/13 10:24 AM
Table of Contents
Technical Data.........................p1-p3
Glossary...................................p4-p5
Initial Operation............................p6
Programming
Manual Time Setup..................p7-p8
Daily Alarm Setup.........................p9
Snooze / 12-24Hr / ºC-ºF..............p10
Max/Min Indoor/Outdoor Temp..p11
WS5019 Weather Forecaster.indd 2
Weather Forecast................................p12
Moon Phase Display...........................p13
Living Space Humidity & Battery...... p14
Wireless Connection & Tips..............p15
Country / City Code Table...........p16-p21
Warranty / QR Code................Back Page
25/07/13 10:24 AM
.........p12
........p13
y...... p14
........p15
.p16-p21
ack Page
WS5019 Weather Forecaster.indd 3
Technical Data
WS5019 HOLMAN iWeather
Weather Forecaster
Thank you for purchasing this device,
please read the operating instructions
carefully to familarize yourself with the
features and modes of operation before
using the Weather Station.
1
25/07/13 10:24 AM
Technical Data - Cont.
Technical Details: Indoor Unit
• Six keys: MODE, +, - , HISTORY,CHANNEL,SNOOZE/LIGHT.
• Time display in 12/24 format
• Continuous perpetual calendar up to 2099
• Display of Date, Month and Day of week
• Day of week display available in 7 languages, i.e. German, English, Italian, French, Dutch Spanish,Danish.
• Weeks Display
• Dual alarm with snooze function (alarm will activate every five minutes)
• 5 weather forecasts: sunny, partly sunny, cloudy, rainy, stormy, weather symbol can be selected manually.
• Barometer and bar and data for 12 hours history of air pressure.
•
•
•
•
•
•
•
•
•
•
Altitude-s
Indoor/ou
Thermom
Tempera
Tempera
Sun Rise
Moon ph
Low batt
Blue bac
Battery:
2
WS5019 Weather Forecaster.indd 4
25/07/13 10:24 AM
nish,Danish.
ed manually.
Technical Data - Cont.
•
•
•
•
•
•
•
•
•
•
Altitude-setting for calculation of air pressure.
Indoor/outdoor temperature and humidity
Thermometer measuring range inside: 0°C to +50 °C , outside -20°C~60 °C
Temperature display elective in °C or °F
Temperature alert
Sun Rise Sun Set/moon rise moon set for 175 cities
Outdoor sensor:
Moon phase
• Frequency: 433 MHz
Low battery indication)
• Battery: 2 x AAA, LR03, 1.5V
Blue background illumination LED.
• 3 channels
Battery: 2 x AA, LR06, 1.5V
• Transmitting distance: 50M open area.
• Sit at least 1 meter of the ground.
WS5019 Weather Forecaster.indd 5
3
25/07/13 10:24 AM
Glossary
1. 12 hour history of pressure
2. Air pressure data
3. Freeze
4. Weather
5. Bar of air pressure
6. Air pressure trend
7. Indoor low battery
8. Outdoor low battery
9. Channel
10. RF symbol
11. Temperature alert
4
WS5019 Weather Forecaster.indd 6
12. Outdoor temperature trend 22. Summer time symbol
13. Indoor temperature trend
(not applicable in Australia market)
14. Outdoor humidity trend
23. Date
15. Living face
24. Moon set
16. Indoor humidity trend
25. Moon Rise
17. Week
26. Moon Phase
18. Day of Week
27. Cities
19. Alarm
28. Sun set
20. Month
29. Sun rise
21. Time
A= MODE B=+ C= - D= HISTORY
E=CHANNEL F=SNOOZE/LIGHT G=RESET
25/07/13 10:24 AM
mbol
ralia market)
HISTORY
G=RESET
WS5019 Weather Forecaster.indd 7
5
25/07/13 10:24 AM
Initial Operation - Outdoor Sensor & Indoor Sensor
Outdoor Sensor
• Please install batteries in the Outdoor Sensor first.
• Open the battery compartment located on the rear side of the device.
Place the batteries in the battery compartment. Observe the shown polarity.
• Please place in a sheltered position outside where it will not get wet or weathered.
Indoor Unit
• Open the battery compartment located on the rear side of the device.
Place the batteries in the battery compartment. Observe the shown polarity.
• The atlitude is flashing, please use `+` or `-` to set the atlitude of your position, then
press History. Weather symbol will be flashing please use + or – to choose weather picture.
• The station is now connecting to the outdoor sensor. This process takes about 3 minutes.
Then the display will show the outdoor temperature and humidity, in case of failure
6 of reception, please press“CHANNEL“for more than 3 seconds to receive again.
WS5019 Weather Forecaster.indd 8
Manual tim
minus butto
•
•
•
•
•
Press an
The displ
The displ
The displ
The displ
Press “M
• The lang
language
25/07/13 10:24 AM
Programming - Manual Time Setup
ensor
ture.
es.
Manual time set-up (most important to quit the reception of radio controlled signal by holding the
minus button for 3 seconds in case it starts to flash before setup.)
Press and hold “MODE“ for 3 seconds.
The display for the year is flashing. Use “+ “ and “-“ to select the year. Press “MODE “ to confirm.
The display for the month is flashing. Use “+ “ and “-“ to select the month. Press “MODE “ to confirm.
The display for the date is flashing. Use “+ “ and “-“ to select the date. Press “MODE “ to confirm.
The display for the time zone is flashing. Use “+ “ or “- “ to select the time zone.
Press “MODE “ to confirm.
• The language selection for the display of the weekdays is flashing. Use “+ “ or “- “ to select the
language. Press “MODE “ to confirm.
•
•
•
•
•
WS5019 Weather Forecaster.indd 9
7
25/07/13 10:24 AM
Programming - Manual Time Setup - Cont.
•
•
•
•
The 12/24 hour is flashing Use “+ “ or “- “ to select. Press “MODE “ to confirm.
The display for the hour is flashing. Use “+ “ or “- “ to select the hour. Press “MODE “ to confirm.
The display for the minutes is flashing. Use “+ “ or “- “ to select the minutes. Press “MODE “ to confirm.
The country/city is flashing. Use “+ “ or “- “ to select the city of sunrise/sunset moonrise/moonset.
Press “MODE “ to confirm.
Information:
• The clock automatically changes from set-up mode to time display mode if no keys are pressed
for 20 seconds.
8
WS5019 Weather Forecaster.indd 10
• Press “M
• Press an
• The hour
• Then follo
• Then pre
• A1 is for
Daily alarm
• When sh
• Press “+”
• When sh
• Press “+”
• The clock
• Press any k
25/07/13 10:24 AM
nt.
onfirm.
“ to confirm.
moonset.
ressed
Programming - Daily Alarm Setup
• Press “MODE” to switch from time display to A1 display.
• Press and hold the key “MODE” for 3 seconds, the flashing alarm time is shown.
• The hour display of the alarm time will flash. Use “+“ or “-“ to select hour. Press “MODE “ to confirm.
• Then follow with the minutes. Use “+“ or “-“ to select the minutes. Press “MODE “ to confirm.
• Then press “MODE” to switch from A1 display to A2 display. (The setting is the same as for A1)
• A1 is for Monday to Friday and A2 is for Saturday and Sunday.
Daily alarm on/off
• When showing A1 alarm time, press “+“ to activate the alarm 1 with alarm symbol showing.
• Press “+” again to cancel the alarm.
• When showing A2 alarm time, press “+“ to activate the alarm 2 with alarm symbol showing.
• Press “+” again cancel the alarm .
Information:
• The clock automatically changes from set-up mode to time mode if no keys are pressed for 20 seconds.
• Press any key to turn off alarm when beeping. (The alarm sounds for 2 minutes if no key is pressed to stop it)
WS5019 Weather Forecaster.indd 11
9
25/07/13 10:24 AM
Programming - Snooze / 12-24Hr / ºC-ºF
Progr
Snooze function - To activate the snooze function, follow the steps below
Press + for
•
•
•
•
•
•
•
•
•
Press the key “SNOOZE/LIGHT“, while the alarm sounds, to activate the snooze function.
If the snooze function is activated, snooze symbol is flashing.
The alarm will repeat after 5 minutes.
The snooze function can be stopped by pressing any key.
12/24 hours mode
Press “CH
Press an
Press “M
Press ”M
When the
The time display can be in 12 hour (AM/PM) or 24 hour mode.
Temperatu
°C/°F temperature display
Press and h
• Alert on:
• Alert off:
The temperature display can be in °C or °F. Press the key “-“ to switch between the mode.
10
WS5019 Weather Forecaster.indd 12
25/07/13 10:24 AM
n.
Programming - Max/Min Indoor/Outdoor Temp
Press + for displaying of indoor/outdoor max/min. of temperature and humidity Temperature alert set up.
•
•
•
•
•
Press “CHANNEL” to select the channel (ch1,ch2,ch3) if more than one outdoor sensor are within reach.
Press and hold the key - , in the area of outdoor, select ON/OFF when flashing.
Press “MODE”, the upper limit temperature is flashing, use + or – to set the maximum alert temperature.
Press ”MODE” , the lower limit temperature is flashing, use + or – to set the minimum alert temperature.
When the alert is activated, the alert symbol will be shown.
Temperature alert on/off
Press and hold the “–” key to set the temperature alert on or off.
• Alert on: Temperature alert symbol shown in display.
• Alert off: Temperature alert symbol goes out.
WS5019 Weather Forecaster.indd 13
11
25/07/13 10:24 AM
Weather Forecasts
5 Weather Forecasts
Sunny
Slightly sunny
Cloudy
Rainy
Stormy
Note: As the weather is forecasted by temperature, humidity only, the display
will have a discrepancy with the actual weather occasionally.
Illumination
Press the key “SNOOZE/LIGHT“ to activate the display illumination for 5 seconds.
12
WS5019 Weather Forecaster.indd 14
25/07/13 10:24 AM
WS5019 Weather Forecaster.indd 15
Moon Phase Display
The weather station uses
saved data to show
the moon phase.
Please refer to the chart
for information on
Moon Phase
positions.
13
25/07/13 10:24 AM
Living Space Humidity & Battery
The weather station uses saved data to determine the humidity in the living space and shows the
respective symbols:
Dry
below 40%
Dry
Low Battery Condition Display
Comfortable
Humid
Comfortable
40% - 70%
(Temperature Display: 20 - 28°C)
Humid
70% - 90%
The weather station displays the low battery condition symbol to warn you that the weather station or
the outdoor sensor need to have the batteries exchanged. It is a good idea to exchange both when the
symbol appears.
14
WS5019 Weather Forecaster.indd 16
Wireless co
• Press the
weather s
• Press an
Tips
When placin
• Install bo
• Try and a
• Also reme
• If the con
• If the con
is not cor
25/07/13 10:24 AM
ws the
station or
h when the
Wireless Connection & Tips
Wireless connection to the Outdoor Sensor
• Press the key “CHANNEL” to select a channel. You can read the data of up to 3 sensors at one
weather station.
• Press and hold the key “CHANNEL” for 3 seconds to search for outdoor sensors.
Tips
When placing both the inside and outside units remember they are subject to interference. Try to:
• Install both the units as close as possible to each other.
• Try and avoid outside interference by not placing them near computers, TV’s or TV antenna’s etc.
• Also remember concrete walls and floors can interupt transmissions. Try and avoid as much as possible.
• If the connection is successful initially and then fails occassionally, try to reduce the distance.
• If the connection fails and then is regained, as sometimes when it reconnects the information
is not correct, it is a good idea to take batteries out and do a manual reset .
15
WS5019 Weather Forecaster.indd 17
25/07/13 10:24 AM
Country / City Code Table
16
WS5019 Weather Forecaster.indd 18
25/07/13 10:24 AM
WS5019 Weather Forecaster.indd 19
Country / City Code Table
17
25/07/13 10:24 AM
Country / City Code Table
18
WS5019 Weather Forecaster.indd 20
25/07/13 10:24 AM
WS5019 Weather Forecaster.indd 21
Country / City Code Table
19
25/07/13 10:24 AM
Country / City Code Table
20
WS5019 Weather Forecaster.indd 22
25/07/13 10:24 AM
WS5019 Weather Forecaster.indd 23
Country / City Code Table
21
25/07/13 10:24 AM
Warranty
Warranty: We will honour all statutory
guarantees that this product
is of acceptable quality.
(including that it is fit for purpose)
HOLMAN Industries:
47 Walters Drive,
Osborne Park, WA 6017.
Ph: +61 8 9204 1011
www.holmanindustries.com.au
WS5019 Weather Forecaster.indd 24
Scan the QR Code above to see
more information on this product
and the full iWeather product
range.
25/07/13 10:24 AM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising