diamond soldering tips
DIAMOND SOLDERING TIPS
FOR THE TD-100 AND HTD-100 SOLDERING IRONS
“Diamond Series” tip heater cartridge soldering tips are now
available for the TD-100 and HTD-100 soldering irons. PACE’s
Diamond Tips feature the benefits of two of PACE’s U.S. patents.
Diamond tips are designed for maximum life, even when using
corrosive lead free solders, and for maximum heat transfer putting
highly productive soldering within reach easily.
Traditionally, soldering tips are manufactured by forming the
desired shape of the tip out of copper, then plating the copper with
a protective layer of pure iron. Next, a layer of nickel/chrome is
selectively plated on the tips to prevent the entire tip from wetting
with solder which defines the working area of the tip. The problem
with traditional tips is that iron is a poor conductor of heat
compared to copper and copper is not as durable as iron, so there
is a fine balance that needs to be maintained. If too much iron
is added, it will prevent a tip from working well, and if too little iron
is added the tip will fail quickly.
PACE’s new Diamond Series tips differ from traditionally made tips
because we combine submicron sized particles of natural diamond
with the iron plating solution that results in a composite, protective
layer of iron and diamond particles. The diamond enriched matrix is
harder than pure iron and will not wear down as quickly as the tip
is abraded. Diamond tips can withstand the corrosive environment
of lead free solders and high temperatures far better than soldering
tips plated with iron alone. Because the diamond particles are an
integral part of the iron matrix and not a coating, they can not wear
off. Additionally, the resulting surface of the tip is not smooth but
is micro-textured that eases wetting with solder and reduces the
formation of oxidation. PACE’s new Diamond Tips offer extended tip
life, faster wetting, and effortless cleaning.
DIAMOND TIPS
In addition to the patented plating matrix, all Diamond Series tips
feature an increased thermal mass and higher wattage heater to
really deliver the heat better than ever before! These are ideal for
high mass and/or high volume applications! PACE continues to
lead the industry by continually developing technology to improve
soldering performance. With the 48 available Diamond Tips, it is
now easier than ever to find the perfect, high performance tip for
your application.
SOLUTIONS FOR THE ELEC T RONICS INTERCONNEC TION PROCESS
Elmatik AS, Türi 9, 11314 Tallinn Estonia tel. +372 650 3875 tel. +372 650 3876 fax +372 655 8019 e-mail: elmatik@elmatik.ee
PACE'S HIGH PERFORMANCE
"DIAMOND" SOLDERING TIPS
PROFILE
DESCRIPTION
PART NUMBER
.016 Conical
PROFILE
DESCRIPTION
PART NUMBER
1126-0601-P1
.06 Wide, Bevel 60 Degrees,
.12x.06 Oval Face
1126-0625-P1
.039 Conical
1126-0602-P1
.07 Bevel, 60 Degree
1126-0626-P1
.055 Conical, Blunt
1126-0603-P1
.078 Bevel, 45 Degree
1126-0627-P1
.031 Conical, Blunt
1126-0604-P1
.13 Bevel, 60 Degree
1126-0628-P1
.016 Conical, Long
1126-0605-P1
.118 Bevel, 45 Degree
1126-0629-P1
.016 Conical
1126-0606-P1
.023 Bevel, Special
1126-0630-P1
.016 Conical, Extended
1126-0607-P1
.031 Chisel Standard
1126-0631-P1
.024 Conical
1126-0608-P1
.047 Chisel Standard
1126-0632-P1
.039 Conical
1126-0609-P1
.062 Chisel Standard
1126-0633-P1
.031 Conical
1126-0610-P1
.094 Chisel Standard
1126-0634-P1
.047 Conical
1126-0611-P1
.157 Chisel Standard
1126-0635-P1
.039 Conical
1126-0612-P1
.205 Chisel Standard
1126-0636-P1
.016 Conical, Blunt, Bent
1126-0613-P1
.157 Chisel Long Reach
1126-0637-P1
.016 Conical, Blunt
1126-0614-P1
.205 Chisel Long Reach
1126-0638-P1
.016 Conical Extended, Bent
1126-0615-P1
.078 Chisel Blunt
1126-0639-P1
.157 Bevel, 45 Degree
1126-0616-P1
.125 Chisel Blunt
1126-0640-P1
.078 Bevel, 60 Degree
1126-0617-P1
.055 Chisel, Bent 30 Degrees
1126-0641-P1
.118 Bevel, 60 Degree
1126-0618-P1
.062 Chisel, Bent 30 Degrees
1126-0642-P1
.157 Bevel, 45 Degree Tinned on
edge/face
1126-0619-P1
.055 Chisel, Bent, Extended
1126-0643-P1
60 Degree Bevel, Extended
1126-0620-P1
.185 Knife, 45 Degree
1126-0644-P1
.039 Bevel, 45 Degree
Tinned on edge / face
1126-0621-P1
.181 Knife, 45 Degree
1126-0645-P1
.078 Bevel, 45 Degree
Tinned on edge / face
1126-0622-P1
.185 Knife, 45 Degree, Blunt
1126-0646-P1
.118 Bevel, 45 Degree
Tinned on edge / face
1126-0623-P1
.188 Knife, 45 Degree
1126-0647-P1
.039 Bevel, 45 Degree
1126-0624-P1
Single Sided Chisel
.08 Wide
1126-0648-P1
PACE INC . 9030 Junction Drive, Annapolis Junction, MD 20701, U.S.A. Tel: 301-490-9860
PACE EUROPE 13 Tanners Drive, Blakelands, Milton Keynes, MK14 5BU, United Kingdom
INTERNET www.paceworldwide.com
Fax: 301-498-3252
Tel: +44 (0) 1908-277666
Fax: +44 (0) 1908-277777
SOLUTIONS FOR THE ELEC T RONICS INTERCONNEC TION PROCESS
Elmatik AS, Türi 9, 11314 Tallinn Estonia tel. +372 650 3875 tel. +372 650 3876 fax +372 655 8019 e-mail: elmatik@elmatik.ee
P/N 5400-0138 11/05
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising