BOBCAT2.0

BOBCAT2.0
BOBCAT2.0 B1020
P
1M
IMPERX: Technically superior products, full tech
support, rapid-response customer care. “Bobcat
2.0” adds many new features, lens control, more
memory and enhanced image quality. Each easy to
use Bobcat is supported by IMPERX professionals.
.
INTERFACES AVAILABLE: Camera Link® Base (PoCL), GigE Vision, PoE, CoaXPress
Resolution
1024 x 1024 (std.), 1032 x 1032 (max.)
SensorKAI-01050, CCD
Sensor Format 5.67mm (H) x 5.67mm (V) 7.96mm diagonal,
1/2” optical format
Pixel Size
5.5 μm
Frame Rate Standard Clock 40 MHz / 59 fps
Frame Rate Overclocked 50 MHz / 74 fps
Maximum Frame Rate
338 fps
Minimum S/N Ratio
60dB
Output Format
Mono CCD: 8, 10, 12, 14-bit (Single only)
Color CCD: 8, 10, 12, RGB 24
Analog Gain Control
Manual, Auto: 0 - 36dB 1024 steps
Black Level Control
Manual, 1024 steps
Digital Gain and Offset
Manual
RGB Gain and Offset
Manual
White Balance
Manual, auto, off
Shutter Speed
1us/step, 1/500,000 to 1/60 sec (nom)
Exposure Control
Manual, auto, external
Long Integration
Up to 16 seconds
Regions of Interest (ROI) 7 ROIs, any line to any line, any pixel to any pixel
Binning H/V
1x, 2x, 3x, 4x, 8x (Independent for H & V)
Trigger Inputs
External (TTL via IN1/IN2), pulse generator,
software, computer
Trigger Options
Level, edge, pulse width, internal exposure,
up to 16 seconds trigger delay, debounce
Trigger Modes
Free-run, standard, double, fast, asynchronous,
frame accumulation
Double Trigger (PIV) Interframe Time: 200 nanoseconds
External Inputs/Outputs
2 IN, 2 OUT, user programmable
Strobe Output
2 strobes, programmable position and duration
RS232 Interface
Yes, programmable
Pulse Generator
Yes, programmable
Image Overlay
Optical center, programmable H & V lines
Image Enhancement
Threshold, contrast enhancement, knee correction,
horizontal flip, negative image, bit shift (+/- 7 places)
Internal DDR Memory
2Gb (256 MB)
On Board FIFO (GEV & PoE)
1Gb (128 MB)
Gamma Correction G=1.0, G=0.45, user upgradeable LUT
Data Corrections
Defective/hot pixel correction (static, dynamic),
black level, vertical smear
Minimum Illumination
1 Lux, F/ 1.4
Lens Mount
C-Mount (Default), CS
Video Iris Control
Auto, programmable
Iris, Zoom Focus Control
Manual, user programmable
Supply Input Range 12VDC (10V - 15V), 1.5 A inrush
Power Consumption
CLB 3.3 W, GEV 4.7w, PoE 5.9W, CXP TBD
Size – Width/Height
46mm (W) x 46mm (H) – Applies to all interfaces
Size – Length
CLB 58.3mm (L), GEV 76.2mm (L), PoE 89.8mm (L),
CXP 65.8mm (L)
Weight CLB 165g, GEV 233g, PoE 343g, CXP 223g
Vibration, Shock
100g (20-200) HZ XYZ, 1000g
Environmental -40°C to +85°C Operating, -50°C to +90°C Storage
Humidity
10% to 90% non-condensing
MTBF >660,000 hours @ 40°C
Regulatory
FCC 15 part A, CE, RoHS
BOBCAT 2.0 B1020 Specifications
Hirose Connectors
Power and I/O Interface
1
2
3
4
5
6
12V DC Return *
+12V DC*
IRIS VCC
IRIS Video
IRIS Return
OUT1/2 Return
7
8
9
10
11
12
OUT1 Signal
IN1 Signal
IN2 Signal
IN1/2 Return
Reserved
OUT2 Signal
Connector: Hirose HR 10A- 10R- 12PB(71)
*Not connected for CXP
Lens Control/RS232
See manual for PIN information
1
2
3
4
5
6
IRIS Return
IRIS VCC
IRIS Video
IRIS IRIS +
FOCUS -
7
8
9
10
11
12
FOCUS +
ZOOM ZOOM +
UART_COM
UART_RX
UART_TX
Connector: Hirose HR 10A- 10R- 12SB(71)
B1020 Ordering Information
Interfaces available
Camera Link® Base (CLB)
GigE Vision (GEV / PoE)
CoaXPress (CXP)
Sensor types available
Monochrome
Bayer Color
Accessories (Sold separately)
PS12v04-Power Supply w/ 1 input and 1 output
PS12v05-Power Supply (as above) and Video Iris
WWW. I MP E RX . COM
bobcat-B1020-v2,Rev1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising