Snom m9 and Elastix Server Setup Guide

Snom m9 and Elastix Server Setup Guide
Snom m9 with Elastix Server
Setup Guide
http://www.elastix.org
PaloSanto Solutions
Snom m9 and Elastix Server Setup Guide
1.0 Setup Diagram
Figure 1-1 is a setup diagram for a single IP phone Snom 300 configuration. The phone is
setup as a SIP telephony device.
Figure 1-1. Setup Diagram
2.0 Host PC Environment
Table 2-1. Host Server Environment Details
Hardware Type
Hardware Version
Software Type
Software Version
Description
Elastix Appliance ELX-Series
ELX-3000
Elastix
2.3
3.0 Test Setup Equipment
Table 3-1. Test Setup Equipment
Equipment
IP (SIP) Phone
Snom
Switch
Model
N/A
m9
N/A
2
Version
N/A
9.4.12-a
N/A
PaloSanto Solutions
Snom m9 and Elastix Server Setup Guide
4.0 Setup Procedure
To set up the Elastix Server for the Snom m9,
1. Go to the web address of the Elastix Server Login page. The web address is
determined by the customer, for this guide we have used the IP address
192.168.1.75
2. On the Login page, type the username and password for an administrative user into
the Username and Password fields, see Figure 4-1. The username and password are
determined by the customer.
Figure 4-1. Login
3. Press Enter or click on the Submit button to go to Elastix‟s Dashboard
4. Once inside, click on the PBX tab on the menu at the top of the screen
Figure 4-2. Dashboard
3
PaloSanto Solutions
Snom m9 and Elastix Server Setup Guide
5.
Click on the Submit button to add an extension, see Figure 4-3. This will take you
to the Add SIP Extension page.
Figure 4-3. Add an Extension
6. On the Add SIP Extension page (Figure 4-4), fill in the following information:
• User Extension (301 in this example)
• Display Name („SnomPhone‟ in this example)
• secret („h7Dka3Rf9si0t‟ in this example)
Figure 4-4. Add SIP Extension
7.
Click on “Submit” button at the end of the page, and you will see a similar page on
Figure 4-5 displaying the “Apply Configuration Changes Here” pink ribbon on top
of the screen. Click on there to apply changes.
4
PaloSanto Solutions
Snom m9 and Elastix Server Setup Guide
Figure 4-5
8.
With this you have just finished creating a SIP extension that will be used by the
Snom m9 to register with the Elastix Server. Repeat Steps 5 through 8 to similarly
create another extension (different values on Step 6) to be used by the IP (SIP)
Phone to register as well (extension 302 in this example). Once you finished you
will see something similar to Figure 4-6.
Figure 4-6
9.
You will need to enter the information from the extension created on the Elastix
Server into the Snom Phone.
To register the Snom m9 Phone we have two methods: Manual Configuration and
Autoprovisioning using Elastix’s Endpoint Configurator.
5
PaloSanto Solutions
Snom m9 and Elastix Server Setup Guide
MANUAL CONFIGURATION
1. Log in to the Snom m9 WebUI by pointing your browser to the Snom Phone‟s IP
address.
For the initial configuration, refer to the Snom m9 Administrator Guide found at:
http://wiki.snom.com/Snom_m9/Documentation
Factory default settings
IP Addressing
Web Access User
Web Access Password
DHCP
admin
password
2. When prompted, enter the Web Access Username and Web Access Password to
access the Snom m9 WebUI (Figure 4-7)
Figure 4-7 Snom WebUI
3. Use the information from the Add SIP Extension page (Figure 4-4) to enter the
following necessary information on “Setup => Identity 1 => Account” section of
the Snom m9 WebUI (Figure 4-8):
Identity Active: Yes
Display Name: SnomUser
Account: 301 in this example
Registrar: Elastix Server’s IP Address (192.168.1.75 in this example)
Password: („h7Dka3Rf9si0t‟ in this example)
Password (repeat): („h7Dka3Rf9si0t‟ in this example)
6
PaloSanto Solutions
Snom m9 and Elastix Server Setup Guide
Figure 4-8. Account
4. Once you have entered the required information, click on “Save” button located at
the end of the page. Now go to “Status => Status => Registration” and check that
Identity 1 is correctly registered. (Figure 4.9).
Figure 4-9. Registration
5. Turn on the cordless phone and when it is ready, go to “Setup => Identity 1 =>
Handsets” an make sure to select the ID of your Snom Phone and click and Save.
To check the Handset ID, from your phone press : → ↑ Ok ↑ ↑ .
7
PaloSanto Solutions
Snom m9 and Elastix Server Setup Guide
Figure 4-10. Handsets
6. Configure the other IP (SIP) Phone with the correct parameters.
7. To test the Snom m9, pick up the previously configured IP (SIP) Phone and call the
Snom Phone‟s extension number (301 in this example). When the call is
established, speak into the phone and verify that the other IP (SIP) Phone can hear
your voice. Check this by calling from both ends. This step completes the manual
procedure.
8
PaloSanto Solutions
Snom m9 and Elastix Server Setup Guide
AUTOPROVISIONING USING ELASTIX‟S ENDPOINT
CONFIGURATOR
Note: Find out the Snom m9‟s IP Address so you can easily identify the phone in the
next steps.
1. In the Elastix WebUI go to “PBX => Endpoint Configurator” (Figure 4-9).
Figure 4.9 Endpoint Configurator
2. Next to the “Discover Endpoints in this Network” button, type the address where
the phone is located and click the button. This will generate a list with all the
phones available in that network (Figure 4-10).
Figure 4.10 Endpoint Configurator
3. In the row where the phone you want to autoprovision is located (find it according
to either its MAC or IP Address):
Mark the checkbox
From the drop-down list, select the correct “Phone Type” (phone model) of the
phone
From the drop-down list, select the “User Extension” you want to assign to the
phone
9
PaloSanto Solutions
Snom m9 and Elastix Server Setup Guide
Figure 4.14 Endpoint Configurator
4. Click the “Set” button. When the process finish loading, reboot the phone by
unplugging and plugging again the power cord.
5. Configure the other IP (SIP) Phone with the correct parameters.
6. To test the Snom m9, pick up the previously configured IP (SIP) Phone and call the
Snom m9‟s extension number (301 in this example). When the call is established,
speak into the phone and verify that the other IP (SIP) Phone can hear your voice.
Check this by calling from both ends.
10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising