ISI-501 series
Mean Well
500W True Sine Wave DC-AC Inverter with MPPT Solar Charger
ISI-501
SERIES
ISI-501
series
500 Watt Inverter Power Supply
Measures: 8.07 x 6.22 x 2.64””
■ Features
‧True sine wave output (THD<3%)
‧High surge power up to 1000W
‧High efficiency up to 88%
‧High frequency design
‧Thermostatically controlled cooling fan
‧Protections: Bat. low alarm / Bat. low shutdown / Over voltage
■ Applications
‧ Home appliance
‧ Power tools
‧Portable equipment
‧Yacht
‧Vehicle
/ Over temp. / Output short / Input polarity reverse / Overload
‧Built-in 500W MPPT solar charger, MPPT efficiency:98%(Typ.)
‧Built-in remote ON-OFF control
‧Built-in battery low relay contact
‧LED indicator for operation status and battery capacity
‧3 years warranty
■ Description
ISI-501 series integrates a DC/AC True Sine Wave Inverter and a MPPT charger. This series is a high
performance true sine wave DC/AC inverter which converts the DC electricity from a system consisting
of batteries and solar panels. ISI-501 is not only a high frequency designed inverter but also fully digitally
controlled by an advanced microprocessor. With true sine wave output, ISI-501 series can provide 500W
continuously, 550W for 60 seconds, and 1000W for 30 AC-cycles. This series incorporates a MPPT solar
charger, including the constant current and constant voltage charging characteristics.
■ Model Encoding
ISI - 501 - 112 - A
12:12VDC
24:24VDC
48:48VDC
1:110VAC
AC Output Voltage
2:230VAC
Output Wattage
Series Name
Bat. Voltage
{
{
AC Output
Receptacle
{
A :TYPE A
B :TYPE B
C :TYPE C
D :TYPE D
E :TYPE E
F :TYPE F
U :TYPE U
OUTLET
OUTLET
OUTLET
OUTLET
OUTLET
OUTLET
OUTLET
File Name:ISI-501-SPEC 2014-06-13
Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably.
Click below for more details, to buy on-line or request volume pricing:
http://power.sager.com/mean-well-ISI-501-power-supply.html
(866) 588-1750
p o w e r @ s a g e r. c o m
h t t p : / / p o w e r. s a g e r. c o m
Mean Well
500W True Sine Wave DC-AC Inverter with MPPT Solar Charger
ISI-501
SERIES
ISI-501
series
500 Watt Inverter Power Supply
Measures: 8.07 x 6.22 x 2.64””
AC Output Receptacles(Optional)
Receptacle type
Country
TYPE-A
Standard
TYPE-B
Standard
USA
EUROPE
TYPE-C
Optional
AUSTRALIA
TYPE-U
TYPE-D
Optional
TYPE-E
Optional
TYPE-F
Optional
Optional
U.K
JAPAN
GFCI
UNIVERSAL
Certificate
Non
SPECIFICATION
MODEL
RATED POWER
OUTPUT
INVERTER
SECTION
INPUT
ISI-501-112□
ISI-501-124□
450W
500W
ISI-501-148□
ISI-501-212□
ISI-501-224□
450W
500W
ISI-501-248□
MAXIMUM OUTPUT POWER (Typ.) 550W for 60 sec. / surge power 1000W for 30 cycles (112, 212 models : 495W for 60 sec. / surge power 900W for 30 cycles)
Factory setting set at 110VAC
Factory setting set at 230VAC
AC VOLTAGE
100 / 110 / 115 / 120VAC selectable by setting button S.W
200 / 220 / 230 / 240VAC selectable by setting button S.W
Factory setting set at 110VAC
Factory setting set at 230VAC
FREQUENCY
60±0.1Hz 50/60Hz selectable by setting button S.W
50±0.1Hz 50/60Hz selectable by setting button S.W
True sine wave (THD<3%) at rated input voltage
WAVEFORM
AC REGULATION (Typ.) Note.1 ±3%
FRONT PANEL INDICATOR
Fault and operation status, Charger status, Battery capacity
12V
24V
48V
12V
24V
48V
BAT. VOLTAGE
Note.3,5 10.5 ~ 15VDC
VOLTAGE RANGE
Note.7 50A
DC CURRENT (Typ.)
NO LOAD CURRENT DRAW (Typ.) 1.25A
21 ~ 30VDC
42 ~ 60VDC
10.5 ~ 15VDC
21 ~ 30VDC
42 ~ 60VDC
30A
0.63A
15A
0.32A
50A
1.25A
30A
0.63A
15A
0.32A
86%
88%
88%
30A
17A
8.5A
40A*2
11V
10.5V
40A*1
22V
21V
20A*2
44V
42V
35 ~ 50V
25 ~ 50V
45 ~ 90V
35 ~ 90V
90 ~ 160V
70 ~ 160V
11A
7A
4.5A
OFF MODE CURRENT DRAW (Typ.) ≦1mA
EFFICIENCY (Typ.)
Note.2 85%
87%
87%
Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE
OUTPUT SHORT
Shut down o/p voltage, re-power on to recover
110% load for 60 sec.
Protection type : Shut down o/p voltage, re-power on to recover
CHARGER CURRENT (Typ.) 30A
17A
8.5A
Open & sealed Lead Acid
BATTERY TYPE
FUSE
40A*2
40A*1
20A*1
22V
44V
BAT. LOW ALARM
Note.3 11V
21V
42V
BAT. LOW SHUTDOWN Note.3 10.5V
By internal fuse open
REV ERSE POLARITY
MPPT CHARGER EFFICIENCY (Typ.) 98%
45 ~ 90V
90 ~ 160V
OPEN CIRCUIT VOLTAGE RANGE 35 ~ 50V
25 ~ 50V
35 ~ 90V
70 ~ 160V
MPPT RANGE
OUTPUT
PROTECTION OVER LOAD (Typ.)
BATTERY SECTION
MPPT / SOLAR
SECTION
SOLAR INPUT CURRENT (Typ.) 11A
ENVIRONMENT
GENERAL
SECTION
SAFETY
&
EMC
OTHERS
4.5A
500W
WORKING TEMP.
WORKING HUMIDITY
20% ~ 90% RH non-condensing
Note.4 -20 ~ +40℃ @ 100% load ; 60℃ @ 50% load
STORAGE TEMP., HUMIDITY
VIBRATION
LVD
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC EMISSION
EMC IMMUNITY
MTBF
DIMENSION
PACKING
NOTE
7A
SOLAR INPUT POWER (Typ.)
-30 ~ +70℃ / -22 ~ +158 F, 10 ~ 95% RH
o
10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes
EN60950-1 (LVD)
None
Bat I/P - AC O/P:3.0KVAC AC O/P - FG:1.5KVAC
Bat I/P - AC O/P, Bat I/P - FG, AC O/P - FG: 100M ohms / 500VDC / 25℃/ 70% RH
Compliance to EN55022 class B
Compliance to FCC part 15 class B
None
Compliance to EN61000-4-2,3,8
57.8K hrs min.
MIL-HDBK-217F (25℃)
205*158*67mm (L*W*H)
2.35Kg; 6pcs/15.1Kg/1.55CUFT
1.THD is tested by rated power, linear load at 13V,26V,52V input voltage.
2.Efficiency is tested by 350W, linear load at 13V,26V,52V input voltage.
3.The tolerance of each voltage value by models is : 112/212→±0.5V ; 124/224→±1V ; 148/248→±2V.
4.Output derating capacity referenced by curve 1.
5.Input derating capacity referenced by curve 2.
6.All parameters not specified above are measured at rated load, 25 ℃ of ambient temperature.
7.DC current is tested by 500W, linear load at 12V,24V,48V input voltage.
File Name:ISI-501-SPEC 2014-06-13
Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably.
Click below for more details, to buy on-line or request volume pricing:
http://power.sager.com/mean-well-ISI-501-power-supply.html
(866) 588-1750
p o w e r @ s a g e r. c o m
h t t p : / / p o w e r. s a g e r. c o m
Mean Well
ISI-501 SERIES
500W True Sine Wave DC-AC Inverter with MPPT Solar Charger
ISI-501
500 Watt Inverter Power Supply
series
Measures: 8.07 x 6.22 x 2.64””
Block Diagram
BATTERY LOW
ALARM
DRY CONTACT
OUTPUT VOLTAGE
&
FREQUENCY
OTP1
REMOTE
ON/OFF
OTP2
MCU1
MCU2
DC/DC
CONVERTER
DC/AC
INVERTER
OLP
Bat. OVP
Bat. UVP
Solar panel
MPPT
CHARGER
FAN
AUX.
POWER
EMI
FILTER
BATTERY
12V/24V/48V
LED
DISPLAY
SETTING
(Selectable by settin g
butto n)
10 0~120VAC or
20 0~240VAC
50 Hz or 60Hz
AC OUTPUT
FILTER
110VAC/60Hz
23 0VAC/50Hz
MPPT CHA RGER
: 5 0KHz
DC/DC CONVERTER : 2 5KHz
DC/AC INVERTER : 20KHz
AUX. POWER
: 100KHz
Derating Curve
100
100
80
80
60
60
50
40
40
20
20
-20
10
20
30
40
50
60
70
10.5VDC
21VDC
42VDC
AMBIENT TEMPERATURE (℃)
CURVE 1
11.5VDC
23VDC
46VDC
15VDC (HORIZONTAL)
30VDC
60VDC
BATTERY INPUT VOLTAGE (V)
CURVE 2
Charging Curve
14.4V
28.8V
57.6V
Start
Charge Voltage
Stage 1 : Constant Current
100%
10%
Charge Curre nt
Stage 1
Stage 2
Stage 2 : Constant Voltage
Stage 3 : MPPT Charger OFF
*Constant current condition : Dependent on solar input current and MPPT
voltage of solar panel.
*MPPT charger OFF condition: Charge current less than 10% rated charge
current and solar input power under 50W.
Stage 3
File Name:ISI-501-SPEC 2014-06-13
Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably.
Click below for more details, to buy on-line or request volume pricing:
http://power.sager.com/mean-well-ISI-501-power-supply.html
(866) 588-1750
p o w e r @ s a g e r. c o m
h t t p : / / p o w e r. s a g e r. c o m
Mean Well
ISI-501 SERIES
500W True Sine Wave DC-AC Inverter with MPPT Solar Charger
Mechanical Specification
Case No.805
Unit:mm
ISI-501
500 Watt Inverter Power Supply
series
Measures: 8.07 x 6.22 x 2.64””
Function Manual
Input Terminal Pin No. Assignment
Pin No.
Assignment
1
Battery Input NEG(-)
2
Battery Input POS(+)
3
Solar Input NEGC(-)
4
Solar Input POS(+)
Pin No.
5
6
7
Assignment
FG
Bat. Low Alarm Connector
Remote ON/OFF Connector
Remote ON/OFF Connector :
JST B-XH or equivalent
SW
Open
Short
Remote ON/OFF Connector
3
4
Normal work
Remote off
5
Revers e Polari ty
Will D amage The Unit.
2
SOLAR INPUT
6
Relay dry contact
Contact Rating :
1A @ 24VDC resistive
Bat. Low Alarm Connector :
JST B-XH or equivalent
7
1
Rem ot e B at tery
ON/OFF l ow al arm
BATTERY INPUT
Air flow
direction
6.35
7.62
Open
Short
Bat. Low Alarm Connector
Battery low
Battery OK
9
147
158
ON
AC OUTPUT
ON
Status
OFF
AC OUTPUT
Status
OFF
Battery
Battery
Setting
Setting
Type-A
Type-B
Installation Manual
Please r efer to : http :\\ w ww\meanwel l.com\search\ISI-501 \ ISI - 501 - E .pdf
File Name:ISI-501-SPEC 2014-06-13
Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably.
Click below for more details, to buy on-line or request volume pricing:
http://power.sager.com/mean-well-ISI-501-power-supply.html
(866) 588-1750
p o w e r @ s a g e r. c o m
h t t p : / / p o w e r. s a g e r. c o m
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising