Aquaflo Cartridge Selection
Maximum Size
Micron
Capacity (Gallons)
Flow Rate (gpm)
26242
PR-30-10BV
4.5" X 10"
30
24,000 @ 10.0 gpm
10 gpm
26243
PR-50-10BV
4.5" X 10"
50
24,000 @ 10.0 gpm
10 gpm
26244
PR-30-20BV
4.5" X 20"
30
48,000 @ 10.0 gpm
20 gpm

Pleated design maximizes
dirt-holding capacity

Designed for general water
filtration purposes

Nominal 20-micron rating

Cellulose based material
Material Information
End Cap Material - Polyurethane
Inner Core Material – Polypropylene
Filter Media –Cellulose paper
40
30
20
10
0
Material Information
Filter Media – Polypropylene

PPC-20-10BB
PPC-20-20BB









Aesthetic
Chlorine:
Taste &
Odor
1
2
3
Pressure Drop (psi)
Maximum Size
Micron
Flow Rate (gpm)
26276
PC-20-10
2.5” X 10”
20
10 gpm
26182
PC-20-20
2.5” X 20”
20
15 gpm
26183
PC-20-10BV
4.5” X 10”
20
20 gpm
4.5” X 20”
Scale
and
Rust
Particles
DG-25-1-10BV,
DG-50-5-20BV



DG-75-25-10BV,
DG-75-25-20BV



20
35 gpm


RF-20, RF-20BV
SPB-1-10,
SPB-5-20


Impregnated Carbon Cellulose (ICC) Dual Purpose Filter *** & (‡)

ICC-20-20BV









Impregnated Carbon Polyester (ICP) Dual Purpose Filter (‡)
Flow Rate vs Approximate Net Pressure Drop (PC Filters)
PC-20-20BV
35
ICP-10-10



ICP-10-20BV



Aesthetic
Chlorine:
Taste &
Odor










String Wound (SW)
Polypropylene Cartridge Filters





PPMB-5-10,
PPMB-5-20BV



PPMB-10-10,
PPMB-10-20BV



PPMB-25-10



PPMB-50-10


PPMB-25-20


PPMB-50-20


PPMB-20-40



PPMB-20-10BV



PPMB-20-20BV







String wound filters reduces
sediment from a variety of liquids

Low pressure drop

Withstand high temperatures

Wide chemical compatibility



SW-30-10,
SW-30-10




NOTE: Filter Cartridge Life varies depending on usage and water conditions.
PC-20-10BV
The manufacturer reserves the right to make product improvements which may deviate from the specifications and descriptions stated herein, without obligation to change previously manufactured products or to note the change.
NOTE: Performance capacity depends on system design, flow rate and certain other application conditions. Certain states
require system registration or certification for health-related reduction claims.
PC-20-20
NOTE: Performance capacity depends on system design, flow rate and certain other application conditions. Certain states
require system registration or certification for health-related reduction claims.
***CAUTION: To be used only for chlorinated water supplies. Cellulose based material is subject to bacteria attack in well
water applications.
Filter Cartridge Life varies depending on usage and water conditions.
****Three times the dirt-holding capacity than other traditional sediment filters.
The smaller the micron rating, the smaller the size particle the cartridge will filter. For comparison purposes, the human hair
has a diameter of approximately 70 microns. Particles smaller than 40 microns are not visible with the human eye.
‡ - May plug quickly in areas of high sediment. Low capacity.
PC-20-10
5
1
1.2
1.4
1.6
1.8
2
2.2
Pressure Drop (psi)
2.4
2.6
2.8
3
Item #
Model #
Maximum Size
Micron
Flow Rate (gpm)
26213
SPB-1-10
2.5" X 10"
1
4 gpm
26222
SPB-5-10
2.5" X 10"
5
5 gpm
26221
SPB-5-20
2.5" X 20"
5
10 gpm
Flow Rate vs Approximate Net Pressure Drop (SPB Filters)
20
18
SPB-5-20
16
12
10
SPB-1-10
4
2
1
2
3
Pressure Drop (psi)
5
Micron
Capacity (Gallons)
Flow Rate (gpm)
26190
ICP-10-10
2.5" X 10"
5
2,500 gallons @ 1 gpm
5 gpm
26191
ICP-10-20BV
4.5" X 20"
20
7,500 gallons @ 4 gpm
10 gpm
Flow Rate (gpm)
5
5 gpm
2.5" X 10"
10
7 gpm
26247
SW-30-10
2.5" X 10"
30
10 gpm
26249
SW-50-10
2.5" X 10"
50
10 gpm
26250
SW-1-20
2.5" X 20"
1
15 gpm
26251
SW-5-20
2.5" X 20"
5
15 gpm
26252
SW-30-10
4.5" X 10"
30
20 gpm
SW-5-20
SW-30-10
SW-1-20
15
SW-30-10
10
SW-5-10
SW-10-10
The PCP cartridge filters are made from resin impregnated cellulose and
polyester fibers. They are constructed with thermally bonded media with
end caps and inner core heat sealed together.

Special formulation Of resin-impregnated cellulose and polyester fibers

Provides higher wet strength than regular cellulose cartridges

High flow rate and high dirt-holding capacity

Wide Variety on sizes and micron ranges available
Flow Rate vs Approximate Net Pressure Drop (PPC Filters)
40
PPC-20-20BB
35
30
WaterGroup Companies Inc.
Regina, SK
Cambridge, ON
Fridley, MN
25
PPC-5-20BB
20
PPC-20-10BB
15
Canada Toll Free Phone: 877-288-9888
PPC-5-10BB
10
USA Toll Free Phone: 877-581-1833
5
www.watergroup.com
0
57472.0412
1
2
Pressure Drop (psi)
3
5
Pleated Polyester Cartridge (PPC) Filter
WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection
before or after the system.
Maximum Size
2.5" X 10"
SW-10-10
0
††- H
igh carbon removal capacity and tolerant to high sediment water. Customers will notice some carbon fines
during initial service.
Model #
Micron
5
NOTE:*The smaller the micron rating, the smaller the size particle the cartridge will filter. For comparison purposes, the
human hair has a diameter of approximately 70 microns. Particles smaller than 40 microns are not visible with the
human eye.
Item #
SW-5-10
26246
SW-50-10
§ - Refer to flow rate and capacity information of cartridge filters in their respective sections of this document
† - High capacity, require pre-sediment filtered water.
Material Information
End Cap Material - Polypropylene
Core - Polypropylene
Gasket – Silicon/PVC
Filter Media – Carbon
Impregnated Polyester
Netting - Polypropylene
SPB-5-10
6
0
he ICDP cartridge filter has a dual benefit for sediment filtration and reduction of chlorine and bad taste and odor from drinking water. These carbon
wrap sediment cartridges consists of polypropylene melt blown core
with carbon impregnated outer layer wrap. It is an economical solution
for general water filtration requirements. This filter is recommended for
chlorinated water supplies. These dual-purpose cartridges are well suited
for residential applications, and are great polishing filters for closed-loop
water stream systems.

Provides sediment filtration as well
as taste/odor /chlorine reduction

High dirt loading capacity

External netting for additional
strength
14
8
Impregnated Carbon Polyester (ICP) Dual Purpose Filter
26273
20

WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before
or after the system.
Maximum Size
Flow Rate vs Approximate Net Pressure Drop (SW Filters)
String Wound (SW) Cartridge Filter
SW-5-10,
SW-5-20
Model #
25
Material Information
Filter Media – Polypropylene
Core – Polypropylene
25
10
Item #
SW cartridge filters are manufactured from polypropylene cord which
is wound around the polypropylene core. These cartridge filters are
economical solution for reduction of sediment, sand, rust and scale
particles from the drinking water.
Operating Temperature: 39° F to 86° F (4° C to 30° C)
Operating Pressure: 0 to 125 psi (0 to 861 kPa)
15
Aqua Flo replacement cartridges will fit most makes of filters with
standard 10” and 20” housings.

30
20
The Aqua Flo range of filters and replacement cartridges improves
water quality in the home, farm or business. Requiring no special tools,
Aqua Flo filters are easily installed and cartridge replacement is simple
and worry-free.
Polypropylene Melt Blown (PPMB) Filter Cartridge


Bad
Taste
&
Odor
Spun Poly Bonded (SPB) Cartrudge Filter

Radial Flow (RF) Granular Activated Carbon Cartridge Filter

Extra Fine
Dirt/Silt/
Sand
Granular Activated Carbon (GAC) Cartridge Filter (††)

ICC-5-10
Fine
Dirt/
Silt/
Sand
CGACC-10,
CGAC-20BV

PR-30-10BV,
PR-30-20BV
Coarse
Sand
Sand/
Dirt/
Silt
Pleated Celluloe (PC) Cartridge Filter***
Pleated Polyster Reusable (PR) Cartridge Filter
Model #
PC-20-20BV
Model #
PC-20-10,
PC-20-20BV

CCB-1-10,
CB-10-20BV
Item #
Flow Rate (gpm)

Use on chlorinated or non-chlorinated supplies.

Designed for purity, bacteria and chemical resistance

Spun fibers form a true gradient

Density from outer to inner surfaces
Bad
Taste
&
Odor
Carbon Block (CB) Cartridge Filter (†)
5
40
Coarse
Sand
Extra Fine
Dirt/Silt/
Sand
Dual Gradient (DG) Density Cartridge Filter****
PR-30-10BV
15
26184
PPC-1-10,
PPC-5-20BB
PR-50-10BV
25
0
The SPB filters are manufactured from 100% polypropylene
which is resistant to chemical and less prone to bacterial
attack. Also they do not impart any taste and odor to
the water.
PR-30-20BV
35
CAUTION: To be used only for chlorinated water
supplies. Cellulose based material is subject to
bacteria attack in well water applications.
Spun Poly Bonded (SPB) Cartridge Filters
Model #
Fine
Dirt/
Silt/
Sand
Sand/
Dirt/
Silt
Pleated Polyester Cartridge (PPC) Filter
45
Flow Rate (gpm)
The PC cartridge filters are made from pleated cellulose media and are
recommended for general water filtration requirements.
Scale
and
Rust
Particles
Flow Rate vs Approximate Net Pressure Drop (PR Filters)
Material Information
Filter Media – Polypropylene
End Caps – Polyurethane
Core – Polyurethane
Pleated Cellulose (PC) Filter Cartridges
Aquaflo Cartridge Selection Guidelines (§)
Flow Rate (gpm)

Pleated design maximizes dirt-holding
capacity

Durable, versatile and reusable

Polyester media is bacteria and
chemical resistant

Nominal 30-micron rating and nominal
50-micron rating
Model #
Flow Rate (gpm)
PR cartridge filters are made from reusable
polyester fibers which are pleated to maximize
dirt holding capacity. These cartridge filters are
multipurpose.
Item #
Flow Rate (gpm)
Pleated Polyester Reusable (PR)
Cartridge Filter
PPC-5-20
PPC-1-20
PPC-5-10
PPC-20-20BB
1
1.2
1.4
1.6
1.8
2
2.2
Pressure Drop (psi)
2.4
2.6
2.8
3
Item #
Model #
Maximum Size
Micron
Flow Rate (gpm)
26174
PPC-1-10
2.5” X 10”
1
5 gpm
26175
PPC-5-10
2.5” X 10”
5
7 gpm
26176
PPC-1-20
2.5” X 20”
1
10 gpm
26177
PPC-5-20
2.5” X 20”
5
13 gpm
26178
PPC-5-10BB
4.5” X 10”
5
18 gpm
26179
PPC-20-10BB
4.5” X 10”
20
20 gpm
26180
PPC-5-20BB
4.5” X 20”
5
20 gpm
26181
PPC-20-20BB
4.5” X 20”
20
35 gpm
Material Information
End Cap Material - Polyurethane
Inner Core Material – Polypropylene
Filter Media – Polyester Fabric
Item #
Model #
Maximum Size
Micron
Flow Rate (gpm)
26185
CGACC-10
2.5" X 10"
7,500 gallons @ 1 gpm
1 gpm @ 7 psi drop
26277
CGAC-10
2.5" X 10"
5,000 gallons @ 1.0 gpm
1 gpm @ 7 psi drop
26186
CGAC-20
2.5" X 20"
10,000 gallons @ 2.0 gpm
2 gpm @ 15 psi drop
26187
CGAC-BV
4.5" X 10"
12,500 gallons @ 2.0 gpm
2 gpm @ 5 psi drop
26188
CGAC-20BV
4.5" X 20"
25,000 gallons @ 4.0 gpm
4 gpm @ 5 psi drop
Carbon Block (CB) Cartridge Filter
Material Information
End Cap Material – Polypropylene
Outer Casing Polypropylene
Expansion Pad – Polypropylene
Gasket PVC/Silicone
Filter Media – G
ranular Activated
Coal Based Carbon
The CB cartridge filter is suitable for high capacity chlorine and
bad taste and odor reduction from drinking water. These filters
also used for sediment filtration making them a great choice for
pre-filtering water for reverse osmosis applications. They make
an ideal choice for a wide range of residential, food service,
commercial and industrial applications.

High Dirt-Holding Tolerance Maximizes Utilization of
the Carbon Block

High porosity maximizes utilization of the carbon block
NOTE: A drinking water cartridge may contain carbon fines (very fine black powder). After installation
and before using the water, follow the instructions
for flushing the cartridge to remove fines.
The CGAC cartridge filters are effective in reduction of chlorine and other bad taste
and odor from drinking water. CGACC cartridge filter contain coconut shell based
activated carbon which is an environment friendly but also effective in reducing
certain compounds* better than the coal based granular activated carbon filter
cartridges.
Material Information
End Cap Material – Polypropylene
Gasket – PVC/Silicone
Filter Media – Acid Washed
Activated Carbon
(Coal or Coconut
Shell Based)
Netting – Polypropylene
Expansion Pad – Polypropylene
NOTE: It is recommended that you run the tap for
20 seconds prior to using the water for drinking or
cooking purposes
* Please check water treatment expert on which
granular activated carbon filter is right for your
application.

Effective taste/odor/ chlorine reduction

Designed for maximum adsorption

Post filter to reduce carbon fines
Item #
Model #
Maximum Size
26192
CCB-1-10*
2.5" X 10"
26193
CCB-5-10*
2.5" X 10"
26194
CB-0.5-10
2.5" X 10"
Micron
1
Capacity (Gallons)
Flow Rate (gpm)
10,000 gallons @ 1 gpm
1 gpm
5
6,000 gallons @ 1 gpm
1 gpm
0.5
20,000 gallons @ 1 gpm
1 gpm
26195
CB-5-10
2.5" X 10"
5
6,000 gallons @ 1 gpm
1 gpm
26196
CB-10-10
2.5" X 10"
10
3,000 gallons @ 1 gpm
1 gpm
26197
CB-0.5-20
2.5" X 20"
0.5
45,000 gallons @ 2 gpm
2 gpm
26198
CB-5-20
2.5" X 20"
5
12,000 gallons @ 2 gpm
2 gpm
26199
CB-10-20
2.5" X 20"
10
6,000 gallons @ 2gpm
2 gpm
26201
CB-0.5-10BV
4.5" X 10"
0.5
50,000 gallons @ 2 gpm
2 gpm
26202
CB-5-10BV
4.5" X 10"
5
22,000 gallons @ 2 gpm
2 gpm
26203
CB-10-10BV
4.5" X 10"
10
15,000 gallons @ 2gpm
2 gpm
26204
CB-0.5-20BV
4.5" X 20"
0.5
150,000 gallons @ 4gpm
4 gpm
26205
CB-5-20BV
4.5" X 20"
5
40,000 gallons @ 4 gpm
4 gpm
26206
CB-10-20BV
4.5" X 20"
10
30,000 gallons @ 4 gpm
4 gpm
NOTE: Cartridges will contain a very small amount of carbon fines (very fine black powder) and a new cartridge after installation should be flushed with sufficient water to remove all traces of the fines from your water system before using the
water. Each time you use your filtered water tap for drinking or cooking purposes it is recommended that you run (flush)
the tap for at least 20 seconds prior to using water.
Dual Gradient (DG) Density Cartridge Filters
DG cartridge filters are made from 100% polypropylene. The progressively
loose structure from inside to outside enhance cartridge performance in
reduction of dirt, dust and other particles. The two separate gradient layers of the filter enhances the performance such that it achieves a much
higher dirt-loading capacity compared to similar size sediment cartridge
filters including spun, string-wound. They make an ideal sediment reduction choice for a wide range of residential, food service, commercial and
industrial applications.

No Fiber release and media migration

Designed for purity, bacteria and
chemical resistance

Two Separate Gradient density layers
enhance cartridge performance

Three times the dirt-holding capacity than
other traditional sediment filters
Item #
Model #
Maximum Size
Micron
Flow Rate (gpm)
26207
DG-25-1-10BV
4.5" X 10"
25/1
10 gpm
26208
DG-50-5-10BV
4.5" X 10"
50/5
10 gpm
26209
DG-75-25-10BV
4.5" X 10"
75/25
10 gpm
26210
DG-25-1-20BBV
4.5" x 20"
25/1
20 gpm
26211
DG-50-5-20BV
4.5" X 20"
50/5
20 gpm
26212
DG-75-25-20BV
4.5" X 20"
75/25
20 gpm
Flow Rate vs Approximate Net Pressure Drop (DG Filters)
80
DG-75-25-20BV
70
DG-50-5-20BV
60
Flow Rate (gpm)
Granular Activated (CGAC) Carbon Cartridge Filter
Material Information
Filter Media – Polypropylene
DG-25-1-20BBV
50
DG-75-25-10BV
40
30
DG-50-5-10BV
20
DG-25-1-10BV
10
*Contains coconut shell based activated carbon.
0
0
0
1
1
2
2
3
3
4
4
5
5
66
Pressure Drop (psi)
Maximum Size
Micron
Capacity (Gallons)
Flow Rate (gpm)
26278
ICC-5-10
2.5" X 10"
5
2,500 gallons @ 1 gpm
5 gpm
26189
ICC-20-20BV
4.5" X 20"
20
7,500 gallons @ 4 gpm
10 gpm
The ICC cartridge filter has a dual benefit for sediment filtration
and reduction of chlorine and bad taste and odor from drinking
water. These carbon wrap sediment cartridges consists of polypropylene melt blown core with carbon impregnated outer layer wrap. It is an
economical solution for general water filtration requirements. This filter
has high dirt-loading capacity and is recommended for chlorinated water
supplies. These dual-purpose cartridges are well suited for residential
applications, and are great polishing filters for closed-loop water stream
systems. The netting and reinforced support provide strength to the filter.

Provides sediment filtration as well as taste/odor /
chlorine reduction

High dirt loading capacity

External netting for additional strength
Material Information
End Cap Material - Polypropylene
Core - Polypropylene
Gasket – Silicone/PVC
Filter Media – Carbon Impregnated Cellulose
Netting – Polypropylene
NOTE: Some harmless bacteria will attack cellulose media cartridges. If your
cartridge seems to disintegrate, or has a musty or moldy odor, switch to a
synthetic media cartridge or consult the manufacturer.
NOTE: Increased flow rates may result in less effective chlorine reduction.
CAUTION: Recommended for chlorinated water supplies
Flow Rate vs Approximate Net Pressure Drop (ICC Filters)
3.0
2.5
ICC-5-10
2.0
1.5
ICC-2020BV
1.0
0.5
0
1
1.000
2
2.000
3
3.000
Pressure Drop (psi)
4.000
4
55.000
Radial Flow (RF) Granular Activated
Carbon Cartridge Filters
The RF cartridge filters are the solution for effective reduction of chlorine and bad taste and odor. These filters provide low pressure drop
and carbon fines released from the filter are much less compared to
the same size GAC style cartridge filter.
Item #
Model #
Maximum Size
Micron
Capacity (Gallons)
Flow Rate (gpm)
26253
RF-20
2.5' X 20"
N/A
6,000 gallons @ 2 gpm
4 gpm
26254
RF-10
2.5" X 10"
N/A
3,000 gallons @ 1 gpm
1 gpm
26255
RF-10BV
4.5" X 10"
N/A
35,000 gallons @ 2 gpm
4 gpm
26256
RF-20BV
4.5" X 20"
N/A
70,000 gallons @ 4 gpm
8 gpm

Ideal for POE (whole house) and other high
flow rate applications

Unique design reduces carbon fines in
filtered water

Very low pressure drop
Material Information
Filter Media – Granular Activated Coal Based
Carbon
Outer Shell – Polypropylene
End Caps – Polypropylene
Gasket – PVC/Silicone
Core – Polypropylene
The granular activated carbon cartridges will contain a very small
amount of carbon fines (very fine black powder). After installation, a
new cartridge should be flushed with sufficient water to remove all
traces of the fines from your water system before using the water.
Each time you use your filtered water tap for drinking or cooking
purposes it is recommended that you run (flush) the tap for at least
20 seconds prior to using water. This is particularly important if the
water tap has not been used daily.
20
Flow Rate vs Approximate Net Pressure Drop (RF Filters)
18
RF-20BV
16

Constructed from high quality polypropylene filter media for higher
filtration efficiency

Thermally bonded micro-fiber construction for high strength

Available in micron ratings from 1 to 50 and lengths from 10”- 40”
Material Information
Filter Media – Polypropylene
Core – Polypropylene
14
12
10
RF-10BV
8
4
30
RF-10
2
Flow Rate vs Approximate Net Pressure Drop (PPMB Filters)
35
RF-20
6
0
The PPMB cartridge filters are made by thermally
bonding polypropylene microfibers for higher filtration efficiency performance. The polypropylene
material is chemical resistant and not prone to
bacterial attack. They will also not add any taste,
color and odor to the water. They are available in
wide variety of sizes and micron ratings.
25
1
1
2
2
33
Pressure Drop (psi)
5
5
10
10
Flow Rate (gpm)
Model #
Flow Rate (gpm)
Item #
Flow Rate (gpm)
Impregnated Carbon Cellulose (ICC)
Dual Purpose Filter
Polypropylene Melt Blown (PPMB)
Filter Cartridges
20
PPMB-20-20BV
PPMB-10-20BV
15
10
5
0
0.5
0.5
0.7
0.7
0.9
0.9
1.1
1.1
1.3
1.3
1.5
1.5
1.7
1.7
Pressure Drop (psi)
1.9
1.9
2.1
2.1
2.3
2.3
2.5
2.5
Item #
Model #
Maximum Size
Micron
Flow Rate (gpm)
26269
PPMB-5-10
2.5" X 10"
5
3 gpm
26223
PPMB-10-10
2.5" X 10"
10
4 gpm
26224
PPMB-25-10
2.5" X 10"
25
5 gpm
26225
PPMB-50-10
2.5" X 10"
50
8 gpm
26226
PPMB-1-20
2.5" X 20"
1
4 gpm
26227
PPMB-5-20
2.5" X 20"
5
7 gpm
26228
PPMB-10-20
2.5" X 20"
10
9 gpm
26229
PPMB-25-20
2.5" X 20"
25
11 gpm
26230
PPMB-50-20
2.5" X 20"
50
15 gpm
26231
PPMB-1-40
2.5" X 40"
1
8 gpm
26232
PPMB-5-40
2.5" X 40"
5
14 gpm
26233
PPMB-20-40
2.5" X 40"
20
20 gpm
26234
PPMB-1-10BV
4.5" X 10"
1
6 gpm
26235
PPMB-5-10BV
4.5" X 10"
5
10 gpm
26236
PPMB-10-10BV
4.5" X 10"
10
11 gpm
26237
PPMB-20-10BV
4.5" X 10"
20
14 gpm
26238
PPMB-1-20BV
4.5" X 20"
1
12 gpm
26239
PPMB-5-20BV
4.5" X 20"
5
20 gpm
26240
PPMB-10-20BV
4.5" X 20"
10
20 gpm
26241
PPMB-20-20BV
4.5" X 20"
20
20 gpm
PPMB-5-10
PPMB-10-10
PPMB-25-10
PPMB-50-10
PPMB-1-20
PPMB-5-20
PPMB-10-20
PPMB-25-20
PPMB-50-20
PPMB-1-40
PPMB-5-40
PPMB-20-40
PPMB-1-10BV
PPMB-5-10BV
PPMB-10-10BV
PPMB-20-10BV
PPMB-1-20BV
PPMB-5-20BV
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising