KDC-BT60U KDC-6047U
CD-RECEIVER
KDC-BT60U
KDC-6047U
INSTRUCTION MANUAL
Before reading this manual, click the button below to check the latest edition
and the modified pages.
Check the latest edition
© 10FLIP_IM305_Ref_en_02_E
Contents
Before use
4
Bluetooth Audio Operation
Component names and functions
6
Connecting a Bluetooth Device
Basic Operation
General operation
7
Before Using
Common Operation
Menu List Operation
iPod/iPhone Operation
8
Basic Operation
Selecting a song by browsing iPod
Play Mode
iPod Setting
Selecting the Search mode
Direct Search
Related Search
Alphabet Search
Skip Search
My Playlist
USB device Operation
14
17
Basic Operation
Music Search
Play Mode
Basic Operation of Disc Changer (Optional)
Direct Music Search
Direct Disc Search
Tuner Operation
Basic Operation
Tuner Setting
Station Preset Memory
Auto Memory Entry
Preset Tuning
Direct Access Tuning
PTY (Program Type)
Program Type Preset
Changing Language for PTY Function
2 |
KDC-BT60U/ KDC-6047U
28
Basic Operation
Display Setting
Customization of 5-line Display Mode & 3-line
Display Mode & iPod-like Display Mode
Customization of Spectrum Analyzer Display Mode
Illumination Color Selection
Auxiliary Input Display Setting
Clock and Other Functions
33
Clock and Date Adjustment
Initial Settings
Demonstration mode Setting
Muting volume upon reception of Phone call
Theft Deterrent Faceplate
Audio Adjustments
20
24
Connecting a Bluetooth Device
Receiving a Call
During a Call
Call Waiting
Other Functions
Making a Call
Speed Dialing (Preset Dial)
Calling a Number in the Phone Book
Calling a Number in the Call log
Dial a Number
Make a Voice Dialing Call
Registering to the Preset Dial Number List
Display of Phone Number type (category)
Display Settings
Basic Operation
File Search
Play Mode
USB Setting
Skip Search
Direct Music Search
Music CD/ Audio file Operation
Operation of hands-free phoning
23
Audio Control
Preset Equalizer curve Select
Manual Equalizer Control
Listening Position Selection
Listening Position Fine Adjustments
Dual Zone System
36
DSP Setup
40
Car Type Selection
Speaker Setting
Car Type Fine Adjustments
X’Over Setting
Audio Preset Memory
Audio Preset Recall
Favorite Control
44
Favorite Preset Memory
Favorite Preset Recall
Favorite Preset Memory Delete
Bluetooth Setup
46
Bluetooth Setting
Registering Bluetooth device
Registering PIN Code
Selecting the Bluetooth device You Wish to
Connect
Deleting a Registered Bluetooth device
Downloading the Phone Book
Adding a Voice Dialing Command
Setting a Voice Command for Category
SMS (Short Message Service)
Basic Operations of remote control
54
Appendix 56
About Audio file
iPod/iPhone that can be connected to this unit
About USB device
About “KENWOOD Music Editor”
About the Cell-Phone
About the Bluetooth Audio player
Menu List
Display Indicator items
Accessories/ Installation Procedure
62
Connecting Wires to Terminals
63
Installation/Removing the Unit
65
Troubleshooting Guide
67
Specifications
70
52
Downloading the SMS
SMS (Short Message Service)
English |
3
Before use
2WARNING
To prevent injury or fire, take the following
precautions:
To prevent a short circuit, never put or leave any
metallic objects (such as coins or metal tools) inside
the unit.
Do not use this unit before canceling
Demonstration mode!
This unit is initially set on the Demonstration mode.
When using this unit for the first time, cancel the
Demonstration mode. Refer to <Demonstration mode
Setting> (page 35).
How to reset your unit
If this unit or the connected unit (auto disc changer,
etc.) fails to operate properly, press the Reset button.
The unit returns to factory settings when the Reset
button is pressed.
Reset button
Cleaning the Unit
If the faceplate of this unit is stained, wipe it with a
dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off with
a cloth moistened with neutral cleaner, then wipe it
again with a clean soft dry cloth.
¤
• Applying spray cleaner directly to the unit may affect its
mechanical parts. Wiping the faceplate with a hard cloth or
using a volatile liquid such as thinner or alcohol may scratch
the surface or erases characters.
Unit and Faceplate Terminals
• To prevent deterioration, do not touch the terminals
of the unit and faceplate with your fingers.
• If the terminals on the unit or faceplate get dirty,
wipe them with a clean soft dry cloth.
4 |
KDC-BT60U/ KDC-6047U
Lens Fogging
When you turn on the car heater in cold weather,
dew or condensation may form on the lens in the
CD player of the unit. Called lens fogging, this
condensation on the lens may not allow CDs to play.
In such a situation, remove the disc and wait for the
condensation to evaporate. If the unit still does not
operate normally after a while, consult your Kenwood
dealer.
Notes
• If you experience problems during installation,
consult your Kenwood dealer.
• When you purchase optional accessories, check with
your Kenwood dealer to make sure that they work
with your model and in your area.
• Characters that conform to ISO 8859-1 can be
displayed.
• Characters that conform to ISO 8859-5 or ISO 8859-1
can be displayed. Set “Russian” of <Initial Settings>
(page 34) to “On”.
• The RDS feature won’t work where the service is not
supported by any broadcasting station.
• In this document, the description indicator will
light means a status is displayed. Refer to <Basic
Operation> (page 28) for the details of the status
display.
• The illustrations of the display and the panel
appearing in this manual are examples used to
explain more clearly how the controls are used.
Therefore, what appears on the display in the
illustrations may differ from what appears on the
display on the actual equipment, and some of the
illustrations on the display may be inapplicable.
Handling CDs
• Do not touch the recording surface of the CD.
• Do not stick tape etc. on the CD, or use a CD with
tape stuck on it.
• Do not use disc type accessories.
• Clean from the center of the disc and move
outward.
• When removing CDs from this unit, pull them out
horizontally.
• If the CD center hole or outside rim has burrs,
use the CD only after removing the burrs with a
ballpoint pen etc.
CDs that cannot be used
• CDs that are not round cannot be used.
• CDs with coloring on the recording surface or CDs
that are dirty cannot be used.
• This unit can only play the CDs with
.
This unit may not correctly play discs which do not
have the mark.
• You cannot play a CD-R or CD-RW that has not
been finalized. (For the finalization process refer to
your CD-R/CD-RW writing software, and your CD-R/
CD-RW recorder instruction manual.)
• 3 inch CD cannot be used. Attempt to insert using
an adapter can cause malfunction.
English |
5
Component names and functions
1
2
3
10
11
5
4
6
AUX
7
8
9
1 Release button
To drop the faceplate down to open and CD can be
inserted or ejected (press the button).
2 [MENU] button
To select a song or set functions. See <Menu List
Operation> (page 7).
3 [DISP] button
To change display item (press the button).
4 [VOL] knob
To adjust volume (turn the knob).
To select menu list item (turn and press the knob). See
<Menu List Operation> (page 7) for details.
KDC-BT60U : To turn on or off the traffic information
function (press the button at least 1 second).
KDC-6047U : To make a voice dialing call (press the
button at least 1 second).
5 [SEARCH MODE] button
To enter Search mode (iPod), move between folders
(Audio file), etc. For more details, see operations of
each source described in page 8 or later.
6 Microphone (KDC-BT60U)
The microphone for the hands free phone is supplied.
When your voice cannot be recognized due to the
low microphone volume or noises in the vehicle,
adjust the microphone settings by <Bluetooth
Setting> (page 46).
7 Auxiliary Input Terminal
Portable audio device can be connected with the
mini-plug (3.5 mm ø).
• Use the mini-plug cable which is stereo type and does not
have any resistance.
6 |
KDC-BT60U/ KDC-6047U
12
13
14
8 [SRC] button
To turn on this unit and select the Source (press the
button).
To turn off this unit (press the button at least 1
second).
9 [4] / [¢] buttons
To select station, song and setting items. (press the
button).
10 [38] button
To start or interrupt playback for CD, audio file, and
iPod. (press the button).
To select the remove mode, and remove the USB
device or an iPod (press the button at least 2 seconds).
11 [ ] button (KDC-BT60U)
To enter Bluetooth mode (press the button).
[TI] button (KDC-6047U)
To turn on or off the traffic information function
(press the button).
To enter Bluetooth mode (press the button at least 1
second).
12 Display window
13 [FAV] button
To recall a registered favorite item (press the button).
To register to Favorite (press the button at least 1
second).
14 USB Terminal
A USB device or an iPod can be connected.
General operation
mode when the messages “To cancel Demo
press the volume knob” are displayed (approx. 15
seconds).
2 Turn the [VOL] knob to select “YES” and press the
[VOL] knob.
⁄
• Demonstration mode can also be cancelled in “DEMO
Mode” of Menu List mode. Refer to <Demonstration mode
Setting> (page 35).
Common Operation
Power and source select
Turns the power ON by pressing the [SRC]
button.
When the power is ON, select a source.
• SRC Select mode 1: Press the [SRC] button and
then turn the [VOL] knob. To determine the
selected source, press the [VOL] knob.
• SRC Select mode 2: Pressing the [SRC] button
each time switches between sources.
Tuner (“TUNER”) ➜ Bluetooth Audio (“BT
AUDIO”) (KDC-BT60U only) ➜ USB (“USB”)
or iPod (“iPod”) ➜ Auxiliary input (“AUX”) ➜
Standby (“STANDBY”) ➜ Tuner...
Keeping pressing the [SRC] button for at least 1
second turns the power OFF.
⁄
• The SRC Select mode can be set in “SRC Select” of <Initial
Settings> (page 34).
• Auxiliary input source is initially set to “OFF”. Set “Built in
AUX” described in <Initial Settings> (page 34) to “ON”.
• When an optional accessory is connected, the source name
for each device appears.
• When connection of the iPod is recognized, the source
display changes from “USB” to “iPod”.
• This unit automatically turns full power OFF after 20
minutes lapses in Standby mode in order to save the
vehicle’s battery. The time until full power OFF can be set in
“Power OFF Wait” of <Initial Settings> (page 34).
Volume
Turning the [VOL] knob adjusts the sound
volume.
1 Select the source
Press the [SRC] button. Turn the [VOL] knob
and press it when the desired item is displayed.
Function items vary from source to source. For a list
of the function items. Refer to <Menu List> (page 58).
✍✍SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
2 Enter Menu List mode
Press the [MENU] button.
3 Select the setting item
Turn the [VOL] knob and press it when the
desired item is displayed.
Repeat the operation until your desired setup item
is selected.
✍✍Press the [MENU] button to return to the
previous item.
Operation example:
Music
1
2
4
3
2
1 [VOL]
3 [MENU]
2 [VOL]
4 [MENU]
3
PlayLists
My Best 25
1
…
1 Press the [VOL] knob to quit the demonstration
The basic operating procedure for using this
function is described below. The individual function
items are covered in the operating procedures.
Artists
Albums
…
Exit of the Demonstration Mode
Turn off the demonstration mode when you use it
for the first time after installation.
Menu List Operation
1 sec.
Play Mode
…
Before Using
In this manual, the above selection is indicated as
Select “Music” > “Playlists” > “My Best 25”.
4 Make a setting
• W
hen the “ PUSH ” icon is displayed (at the
right edge of the display)
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.
• When the “ PUSH ” icon is not displayed
Press the [4] or [¢] button to select a
setting value.
5 Exit Menu List mode
Press the [MENU] button for at least 1 second to
return to the first hierarchy. Press the [MENU]
button in the first hierarchy to exit the Menu
List mode.
⁄
• You cannot set the item with the “ ” icon displayed.
English |
7
iPod/iPhone Operation
SRC MENU VOL
DISP
4 38 ¢
SEARCH MODE
KCA-iP101 (optional
accessory) is required to
connect an iPod.
/ TI
Basic Operation
2 Enter Menu List mode
Playing iPod
3 Turn the [VOL] knob and press it when the
• Connect an iPod
When connected, the source is switched
automatically and a song starts playing.
• Select iPod source
Press the [SRC] button. Turn the [VOL]
knob and press it when the desired item is
displayed.
Select the “iPod” display.
✍✍SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
Song Select
Press the [4] or [¢] button.
Fast Forwards or Fast Backwards
Hold down the [4] or [¢] button.
Pause and Play
Press the [38] button to pause or resume
playback.
Remove iPod
Press the [38] button for at least 2 seconds.
The unit enters the USB REMOVE mode (“USB
REMOVE” is displayed), and the iPod can be
removed safely.
Selecting a song by browsing iPod
Display
“Music”
“Playlists”
“Artists”
“Albums”
“Songs”
“Podcasts”
“Genres”
“Composers”
Items
Playlists
Artists
Albums
Songs
Podcasts
Genres
Composers
1 Select iPod source
8 |
KDC-BT60U/ KDC-6047U
Press the [MENU] button.
desired item is displayed.
Select “Music”.
4 Select a song
Operation type
Move between items
Select an item
High Speed Search
Return to previous item
Return to Top menu
Operation
Turn the [VOL] knob.
Press the [VOL] knob.
Press the [DISP] or [ ] / [TI] button to
scroll up or down by a page.
Press the [DISP] or [ ] / [TI] button for
at least 1 second to continuously scroll up
or down at high speed. Press the button
again to stop scrolling.
Press the [MENU] button.
Press the [MENU] button for at least 1
second.
✍✍For example: Searching by Artist name.
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Music” > “Artists” > Artist name > Album
name > Song title
Cancelling Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
⁄
• The unit memorizes the position where you have
found a song in the Search mode. When you enter the
Menu List mode after searching a song, the memorized
position is displayed. Press the [MENU] button for at least
1 second to move to the first hierarchy, select a Menu
item, and set it’s parameters.
• Characters which cannot be displayed are left blank. If
non of the characters can be displayed, the browse item
name and digits are displayed.
Items
Playlists
Artists
Albums
Songs
Display
“PLIST***”
“ART***”
“ALB***”
“PRGM***”
Items
Podcasts
Genres
Composers
Display
“PDCT***”
“GEN***”
“COM***”
Play Mode
You can select a Play Mode, such as Random play
and Repeat play.
1 Select iPod source
2 Enter Menu List mode
iPod Setting
You can select following iPod Setting items.
Press the [MENU] button.
3 Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Play Mode”.
1 Select iPod source
2 Enter Menu List mode
Press the [MENU] button.
3 Turn the [VOL] knob and press it when the
4 Select the Play Mode
desired item is displayed.
Select “Settings”.
Turn the [VOL] knob.
Display
“Play Mode”
“iPod by Hand”
• iPod can be operated when it conforms to the iPod
control function.
4 Select the setting item
Overview
When set to “ON”, allows you to operate iPod
with the control on the iPod.
“ON”/ “OFF”
“Folder Random” When set to “ON”, plays the music in the folder
randomly.
“ON”/ “OFF”
“All Random”
When set to “ON”, plays all songs in iPod
randomly.
“ON”/ “OFF”
“File Repeat”
When set to “ON”, plays the music repeatedly.
“ON”/ “OFF”
(
: Factory setting)
5 Make a setting
Press the [4] or [¢] button.
6 Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Remarks
• All Random
• The time required to turn on the all random function
may become longer depending on the number of songs
in iPod.
• Turning on the all random function changes the iPod
browse item to “Songs”. This browse item will not be
changed even if the all random function is turned off.
• If the browse item is changed to search for music while
the all random function is on, the all random function is
turned off and the songs in the browse item are played
at random.
• iPod by Hand (iPod Control by Hand Mode)
Allows you to operate iPod with the control on the iPod.
Turn the [VOL] knob and press it when the
desired item is displayed.
Display
“Settings”
“Skip Search”
“Delete My
Playlist”
Overview
Sets the ratio of skip performed with <Skip
Search> (page 12).
“0.5%”/ “1%”/ “5%”/ “10%”
Deletes the registered My Playlist.
Refer to <Deleting a Song from the Playlist>
(page 12) for the operation.
“One”/ “All” ➜ “Yes”/ “No”
(
: Factory setting)
5 Make a setting
• W
hen the “ PUSH ” icon is displayed (at the
right edge of the display)
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.
• When the “ PUSH ” icon is not displayed
Press the [4] or [¢] button to select a
setting value.
6 Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
⁄
• The setting of “Skip Search” in <iPod Setting> (page 9)
and that in <USB Setting> (page 15) are always the same.
Changing the setting of one reflects the other.
⁄
• In the iPod Control by Hand Mode, iPod cannot be
operated using this unit.
• This mode is not compatible with music information
display. The display will show “iPod by Hand Mode”.
English |
9
iPod/iPhone Operation
Selecting the Search mode
Direct Search
You can select the most suited search method for
the desired song from 4 types of the Search mode.
You can quickly search the desired song by
specifying its Search item (artist, album, etc.) and
initial.
Normal playing
Display
“Direct Search”
“Related Search”
“Recall My Playlist”
“Delete My Playlist”
“Register My P-list”
Overview
You can quickly search the desired song by
specifying its Search item (artist, album, etc.)
and initial.
Refer to <Direct Search> (page 10).
Searches for music of the same artist or genre
as the one being played.
Refer to the <Related Search> (page 11).
Registers a song to My Playlist and play it.
Refer to <My Playlist> (page 12).
Browsing
Display
“Direct Search”
“Alphabet Search”
“Skip Search”
“Register My P-list”
Overview
You can quickly search the desired song by
specifying its Search item (artist, album, etc.)
and initial.
Refer to <Direct Search> (page 10).
You can select an alphabetic character from
the list in the Search item (artist, album, etc.)
selected now.
Refer to <Alphabet Search> (page 11).
The number of songs to be skipped is
determined by the ratio of the total number of
songs in the list which is selected now.
Refer to <Skip Search> (page 12).
Registers a song to My Playlist.
Refer to <My Playlist> (page 12).
1 Select iPod source
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select the “iPod” display.
✍✍SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
2 Enter Search mode
Press the [SEARCH MODE] button.
3 Select the Search mode
Turn the [VOL] knob.
4 Start the search mode
Press the [VOL] knob.
Cancelling Search mode
Press the [SEARCH MODE ] button.
10 |
KDC-BT60U/ KDC-6047U
1 Select iPod source
2 Press the [SEARCH MODE] button.
3 Enter Direct Search mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Direct Search”.
4 Select the Search item
Turn the [VOL] knob and press it when the
desired Search item is selected.
Display
Items
Display
Items
“PLAYLISTS”
Playlists
“PODCASTS”
Podcasts
“ARTISTS”
Artists
“GENRES”
Genres
“ALBUMS”
Albums
“COMPOSERS” Composers
“SONGS”
Songs
5 Select the character to be searched for
Operation type
Move between items
Select an item
Move to the next column
Operation
Turn the [VOL] knob.
Press the [VOL] knob.
Press the [4] or [¢] button.
Up to 3 characters can be entered.
6 Determine the selected initial
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “DONE”.
Start search. When search is completed, the music
search mode is selected again at the selected
character position.
After this step, you need to browse. See step 4 of
<Selecting a song by browsing iPod> (page 8) to
select a song.
Cancelling the Direct Search
Press the [SEARCH MODE] button.
⁄
• Characters that can be entered are alphabetical
characters (A to Z), numerical characters(0 to 9), and “ * ”.
• “ * ” indicates characters other than alphabetical and
numerical characters. You cannot enter any more
characters when entering “ * ” in the first character
position.
• If the first character string begins with an article “a”, “an”,
or “the” in the Direct Search mode, it is searched for in
defiance of the article.
Related Search
Alphabet Search
Searches for music of the same artist or genre as the
one being played.
You can select a song by alphabet. This function
searches songs whose name contain the specified
character(s) in the list of the selected Search item
(artist, album, etc).
1 Play the music in iPod
2 Press the [SEARCH MODE] button.
3 Enter Related Search mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Related Search”.
4 Select the Search item
Turn the [VOL] knob and press it when the
desired Search item is selected.
Display
“Search Artist”
“Search Album”
Searches music
Displays the album of the same artist.
Displays music in the album in which the one
being played is included.
“Search Genre”
Displays the artist of the same genre.
“Search Composer” Displays the album including music created by the
same Composer.
After this step, you need to browse. See step 4 of
<Selecting a song by browsing iPod> (page 8) to
select a song.
Cancelling the Related Search
Press the [SEARCH MODE] button.
⁄
• Related search cannot be performed while playing the
Podcast.
• When the music being played has no information on
browsing items or no music was found, “Not Found” is
displayed.
1 Select iPod source
2 Enter browsing mode
Press the [MENU] button.
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Music” > item.
3 Enter Alphabet Search mode
Press the [SEARCH MODE] button.
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Alphabet Search”.
4 Search for item
Operation type
Select the character
Move between items
Select an item
Return to previous item
Operation
Press the [DISP] or [ ] / [TI] button.
Turn the [VOL] knob.
Press the [VOL] knob.
Press the [MENU] button.
After this step, you need to browse. See step 4 of
<Selecting a song by browsing iPod> (page 8) to
select a song.
Cancelling the Alphabet Search
Press the [SEARCH MODE] button.
⁄
• The time of search by alphabet may become long
depending on the number of songs or items in iPod.
• If the first character string begins with an article “a”, “an”,
or “the” in the Alphabet Search mode, it is searched for in
defiance of the article.
English |
11
iPod/iPhone Operation
Skip Search
My Playlist
You can scroll up or down according to the number
of the selected Search items so that you can quickly
switch the display position.
Allows you to register your favorite songs in the
Playlist of this unit. You can register up to 10 songs
in the Playlist.
1 Select iPod source
2 Enter browsing mode
Registering Songs in the Playlist
Press the [MENU] button.
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Music” > item.
3 Press the [SEARCH MODE] button.
4 Enter Skip Search mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Skip Search”.
5 Search for item
Operation type
Move between items
Select an item
Skip Search
Sets the ratio of skip
performed
Return to previous item
Operation
Turn the [VOL] knob.
Press the [VOL] knob.
Press the [DISP] or [ ] / [TI] button.
Keep pressing the button for 3 seconds or
longer skips songs at 10% irrespective of
the setting.
Press the [4] or [¢] button.
Press the [MENU] button.
After this step, you need to browse. See step 4 of
<Selecting a song by browsing iPod> (page 8) to
select a song.
Cancelling the Skip Search
Press the [SEARCH MODE] button.
⁄
• Set the ratio with “Skip Search” in <iPod Setting> (page
9).
1 Play the song you want to register
2 Press the [SEARCH MODE] button.
3 Register the song
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Register My Playlist”
“## Stored (Registration number)” is displayed.
⁄
• Make a Playlist from the songs stored in one iPod. If you
attempt to register a song stored in a different iPod,
”No Information” appears and then ”Delete My Playlist”
appears. Select “Yes” to delete the Playlist when you want
to remake it.
• The song displayed in the Music Search mode can be
registered in the same manner. For how to use the music
search function, refer to <Selecting a song by browsing
iPod> (page 8).
• If you attempt to register the eleventh song, ”Memory
Full” appears and you cannot register it accordingly. To
register the song, delete an unnecessary song.
• Do not register Podcasts. Songs you do not want to
register may be registered, or playback may not be
carried out correctly.
Playing the Song in the Playlist
1 Press the [SEARCH MODE] button.
2 Enter My Playlist mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Recall My Playlist”.
3 Play the song in the Playlist
Turn the [VOL] knob and press it when the
desired item is displayed.
Select the song you want to play.
⁄
• Turning ACC OFF or the power OFF cancels the My
Playlist mode.
• The ending of a song may be cut unless the song has a
silence of 1 second or longer at the end.
• Random play cannot be performed during playback of a
song in the Playlist.
Deleting a Song from the Playlist
1 Press the [SEARCH MODE] button.
12 |
KDC-BT60U/ KDC-6047U
2 Enter Delete Playlist mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Delete My Playlist”.
3 Turn the [VOL] knob and press it when the
desired item is displayed.
Select ”Delete One” or ”Delete All”.
Selecting “Delete All” moves to step 5 and all songs
are deleted.
4 Turn the [VOL] knob and press it when the
desired item is displayed.
Select the song you want to delete.
5 Turn the [VOL] knob and press it when the
desired item is displayed.
Select ”Yes”.
“Complete” is displayed.
⁄
• You can also delete all songs from the Playlist by
selecting “Delete My Playlist” described in the section
<iPod Setting> (page 9).
• If you connect the different iPod from one registered to
My Playlist, “Delete One” and “Delete All” will not appear
and all songs be deleted.
English |
13
USB device Operation
SRC MENU VOL
DISP
4 38 ¢
/ TI
SEARCH MODE
When connecting the
USB device, usage of
the CA-U1EX (option) is
recommended.
Basic Operation
File Search
Playing USB device
Selecting the file you want to listen to from the
device being played now.
• Connect a USB device
When connected, the source is switched
automatically and a song starts playing.
• Select USB source
Press the [SRC] button. Turn the [VOL]
knob and press it when the desired item is
displayed.
Select the “USB” display.
✍✍SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
Moving to the next folder
Press the [SEARCH MODE] button.
Song Select
Press the [4] or [¢] button.
Fast Forwards or Fast Backwards
Hold down the [4] or [¢] button.
⁄
• No sound is output while playing audio file.
Pause and Play
Press the [38] button to pause or resume
playback.
Remove USB device
Press the [38] button for at least 2 seconds.
The unit enters the USB REMOVE mode (“USB
REMOVE” is displayed), and the USB device can be
removed safely.
USB device
Display
“Music”
Items
Folder or file name list.
Music Editor media
Display
“Music”
“Playlists”
“Artists”
“Albums”
“Songs”
“Genres”
Items
Playlists
Artists
Albums
Songs
Genres
1 Select USB source
2 Enter Menu List mode
Press the [MENU] button.
3 Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Music”.
4 Select a file
Operation type
Move between items
Select an item
High Speed Search
Return to previous item
Return to Top menu
Operation
Turn the [VOL] knob.
Press the [VOL] knob.
Press the [DISP] or [ ] / [TI] button to
scroll up or down by a page.
Press the [DISP] or [ ] / [TI] button for
at least 1 second to continuously scroll up
or down at high speed. Press the button
again to stop scrolling.
Press the [MENU] button.
Press the [MENU] button for at least 1
second.
✍✍For example: Searching for ¡".
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Music” > 1 > 2 > ¡"
14 |
KDC-BT60U/ KDC-6047U
1
¡!
USB Setting
2
You can select following USB Setting items.
¡"
¡#
Cancelling Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
⁄
• When you search a song in the File Search mode, the
unit memorizes the position of the song being played
after the search. To set a different Menu item after
searching a song, press the [MENU] button for at least 1
second to move to the first hierarchy.
1 Select USB source
2 Enter Menu List mode
Press the [MENU] button.
3 Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Settings”.
4 Select the setting item
Turn the [VOL] knob and press it when the
desired item is displayed.
Display
“Settings”
“Skip Search”
Play Mode
You can select a Play Mode, such as Random play
and Repeat play.
1 Select USB source
2 Enter Menu List mode
Sets the ratio of skip performed with <Skip
Search> (page 12).
“0.5%”/ “1%”/ “5%”/ “10%”
(
: Factory setting)
5 Make a setting
Press the [4] or [¢] button.
Press the [MENU] button.
3 Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Play Mode”.
6 Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
⁄
4 Select the Play Mode
• The setting of “Skip Search” in <iPod Setting> (page 9)
and that in <USB Setting> (page 15) are always the same.
Changing the setting of one reflects the other.
Turn the [VOL] knob.
Display
“Play Mode”
“File Scan”
Overview
Overview
When set to “ON”, plays the intro of the music in
the folder successively.
“ON”/ “OFF”
“Folder Random” When set to “ON”, plays the music in the folder
randomly.
“ON”/ “OFF”
“File Repeat”
When set to “ON”, plays the music repeatedly.
“ON”/ “OFF”
“Folder Repeat” When set to “ON”, plays the music in the folder
repeatedly.
“ON”/ “OFF”
(
: Factory setting)
5 Make a setting
Press the [4] or [¢] button.
6 Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
English |
15
USB device Operation
Skip Search
Function of remote control
You can scroll up or down according to the number
of the selected Search items so that you can quickly
switch the display position.
Searching the music by entering the file number.
1 Select USB source
2 Enter File Search mode
Press the [MENU] button.
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Music” > item.
3 Enter Skip Search mode
Press the [SEARCH MODE] button.
4 Search for music
Operation type
Move between items
Select an item
Skip Search
Sets the ratio of skip
performed
Return to previous item
Operation
Turn the [VOL] knob.
Press the [VOL] knob.
Press the [DISP] or [ ] / [TI] button.
Keep pressing the button for 3 seconds or
longer skips songs at 10% irrespective of
the setting.
Press the [4] or [¢] button.
Press the [MENU] button.
After this step, see step 4 of <File Search> (page 14)
to select a song.
Cancelling the Skip Search
Press the [SEARCH MODE] button.
⁄
• This operation is effective only for the files registered in
the database created with KENWOOD Music Editor.
• Set the ratio with “Skip Search” in <USB Setting> (page 15).
16 |
KDC-BT60U/ KDC-6047U
Direct Music Search
1 Enter Direct Music Search mode
Press the [DIRECT] button on the remote
control.
2 Enter the music number
Press the number buttons on the remote
control.
3 Search the music
Press the [4] or [¢] button.
Cancelling Direct Music Search
Press the [DIRECT]] button.
⁄
• Direct Music Search cannot be performed during playing
of “Music Editor” media, Random play, or scan play.
Music CD/ Audio file Operation
Release
MENU VOL
DISP
SEARCH MODE
Fast Forwards or Fast Backwards
Hold down the [4] or [¢] button.
⁄
• No sound is output while playing audio file.
SRC 4 38 ¢
/ TI
Pause and Play
Press the [38] button to pause or resume
playback.
Basic Operation
Function of Internal CD source
Drop open the faceplate
Press the Release button.
Selecting the music you want to listen to from the
disc being played now.
⁄
• Push the faceplate on the left side, and return it to its
former position.
Disc play
• A disc inserted.
When inserted, the source is switched
automatically and a song is starts playing.
When a CD is inserted, the “CD-IN” indicator
is ON.
Music Search
Display
“Music”
Overview
Track list (Music CD) / Folder or file name list
(Audio file)
1 Select CD source
2 Enter Menu List mode
Press the [MENU] button.
3 Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Music”.
4 Search for music
Operation type
Move between items
Select an item
High Speed Search
• Select CD source
Press the [SRC] button.Turn the [VOL]
knob and press it when the desired item is
displayed.
Select the “CD” display.
✍✍SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
Disc ejection
Press the [0] button.
Moving to the next folder
Press the [SEARCH MODE] button.
Return to previous item
Return to Top menu
Operation
Turn the [VOL] knob.
Press the [VOL] knob.
Press the [DISP] or [ ] / [TI] button to
scroll up or down by a page.
Press the [DISP] or [ ] / [TI] button for
at least 1 second to continuously scroll up
or down at high speed. Press the button
again to stop scrolling.
Press the [MENU] button.
Press the [MENU] button for at least 1
second.
Cancelling Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
⁄
• This operation can be performed only for the Audio file.
Song Select
Press the [4] or [¢] button.
English |
17
Music CD/ Audio file Operation
Play Mode
You can select a Play Mode, such as Random play
and Repeat play.
1 Select CD source
2 Enter Menu List mode
“Magazine
Random”
“Track Repeat”
“Disc Repeat”
Press the [MENU] button.
3 Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Play Mode”.
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Music CD source
“Track Repeat”
Overview
When set to “ON”, plays the intro of the music on
the disc successively.
“ON”/ “OFF”
When set to “ON”, plays the music on the disc
randomly.
“ON”/ “OFF”
When set to “ON”, plays the music repeatedly.
“ON”/ “OFF”
(
: Factory setting)
Overview
When set to “ON”, plays the intro of the music on
the disc successively.
“ON”/ “OFF”
“Folder Random” When set to “ON”, plays the music on the disc
randomly.
“ON”/ “OFF”
“File Repeat”
When set to “ON”, plays the music repeatedly.
“ON”/ “OFF”
“Folder Repeat” When set to “ON”, plays the music on the disc
repeatedly.
“ON”/ “OFF”
(
: Factory setting)
Disc changer source
Display
“Play Mode”
“Track Scan”
“Disc Random”
18 |
Overview
When set to “ON”, plays the intro of the music on
the disc successively.
“ON”/ “OFF”
When set to “ON”, plays the music on the disc
randomly.
“ON”/ “OFF”
KDC-BT60U/ KDC-6047U
Basic Operation of Disc Changer
(Optional)
Select CD changer source
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select the “CD CHANGER” display.
✍✍SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
Moving to the next disc
Press the [SEARCH MODE] button.
Audio file source
Display
“Play Mode”
“File Scan”
: Factory setting)
6 Exit Menu List mode
Turn the [VOL] knob.
“Disc Random”
(
5 Make a setting
Press the [4] or [¢] button.
4 Select the Play Mode
Display
“Play Mode”
“Track Scan”
When set to “ON”, plays the music in the disc
changer randomly.
“ON”/ “OFF”
When set to “ON”, plays the music repeatedly.
“ON”/ “OFF”
When set to “ON”, plays the music on the disc
repeatedly.
“ON”/ “OFF”
Song Select
Press the [4] or [¢] button.
Fast Forwards or Fast Backwards
Hold down the [4] or [¢] button.
Pause and Play
Press the [38] button to pause or resume
playback.
Function of remote control
Direct Music Search
Searching the music by entering the track number.
1 Enter Direct Music Search mode
Press the [DIRECT] button on the remote
control.
2 Enter the music number
Press the number buttons on the remote
control.
3 Search the music
Press the [4] or [¢] button.
Cancelling Direct Music Search
Press the [DIRECT] button.
⁄
• Direct Music Search cannot be performed during playing
of Random play or scan play.
Function of disc changer with remote control
Direct Disc Search
Searching the disc by entering the disc number.
1 Enter Direct Disc Search mode
Press the [DIRECT] button on the remote
control.
2 Enter the disc number
Press the number buttons on the remote
control.
3 Search the disc
Press the [FM] or [AM] button.
Cancelling Direct Disc Search
Press the [DIRECT] button.
⁄
• Direct Disc Search cannot be performed during Random
play or scan play.
• Input “0” to select disc 10.
English |
19
Tuner Operation
SEARCH MODE
SRC MENU VOL
3 Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Settings”.
4 Select the setting item to adjust
Turn the [VOL] knob and press it when the
desired item is displayed.
4
¢
/ TI
Basic Operation
Selecting Tuner source
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select the “Tuner” display.
✍✍SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
Selecting the Receiving Band
Press the [SEARCH MODE] button.
Pressing the button switches the receiving band
(FM1, FM2, FM3, AM).
Selecting the Receiving station
Press the [4] or [¢] button.
✍✍Details of the station selecting in operation are
set in the “Seek mode” of <Tuner Setting> (page
20).
Display
“Settings”
“Local Seek”
“Seek Mode”
“Auto Memory”
“Forced MONO”
“News”
“AF”
Traffic information
KDC-BT60U Press the [VOL] knob for at least 1 second.
“RDS Regional”
KDC-6047U Press the [ ] / [TI] button.
Turns ON or OFF the Traffic Information function.
When the function is set to ON, “TI” indicator is ON.
If traffic bulletin starts when the function is ON,
“Traffic INFO” is displayed and traffic information is
received.
✍✍If the volume is adjusted during reception
of traffic information, the adjusted volume
is memorized automatically. The memorized
volume will be applied next time the Traffic
Information function is turned ON.
Tuner Setting
You can select following Tuner Setting items.
1 Select Tuner source
2 Enter Menu List mode
Press the [MENU] button.
20 |
KDC-BT60U/ KDC-6047U
“Auto TP Seek”
Overview
Only stations whose reception is good are
searched in auto seek tuning.
“OFF”/ “ON”
Selects the tuning mode of the radio.
“Auto1”: Automatic search for a station.
“Auto2”: Search in order of the stations in the
Preset memory.
“Manual”: Normal manual tuning control.
Memorizes 6 stations with good reception
automatically.
Refer to <Auto Memory Entry> (page 21)
Reduces the noise when stereo broadcasts are
received as monaural.
“OFF”/ “ON”
Turns ON/OFF the News Bulletin Automatic
Reception function and sets the news bulletin
interrupt disabled time.
“OFF”/ “00min” – “90min”
When station reception is poor, automatically
switches to the station that is broadcasting the
same program over the same RDS network. (AF:
Alternative Frequency)
“OFF”/ “ON”
Sets whether to switch to the station only in the
specific region using the “AF” control.
“OFF”/ “ON”
When traffic information station reception is
poor, automatically searches for a station that
can be received better.
“OFF”/ “ON”
(
: Factory setting)
5 Make a setting
Press the [4] or [¢] button.
6 Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Remarks
• News (News Bulletin with Timeout Setting)
Automatically receives news bulletin when it starts. Set
the time during which interrupt is to be disabled after
start of another news bulletin. Changing “News 00min”
to “News 90min” turns this function ON. If news bulletin
starts when this function is ON, “News” is displayed and
news is received. If “20min” is has been set, reception of
another news bulletin will not start for 20 minutes. The
news bulletin volume is the same level that was set for
Traffic Information.
• Forced MONO
Strong electrical fields (such as from power lines) may
cause unstable sound quality when it is set to ON. In such
a situation, turn it OFF.
Station Preset Memory
Putting a station in the memory.
1 Select the radio band and tune in a desired
radio station you wish to store in the preset
memory
2 Enter Menu List mode
Press the [MENU] button.
3 Enter Preset Memory mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “List & Memory”.
4 Select the number to put in the memory
Turn the [VOL] knob and press it for at least 2
seconds when the desired item is displayed.
Select preset number.
Overview
Preset number 1.
Preset number 2.
…
Display
“List & Memory”
“-1”
“-2”
“-6”
Preset number 6.
Cancelling the Preset Memory mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Auto Memory Entry
Putting stations with good reception in the memory
automatically.
1 Select the radio band you wish to store in the
preset memory
2 Enter Menu List mode
Press the [MENU] button.
3 Enter Auto Memory Entry mode
desired item is displayed.
Select “YES”.
When 6 stations that can be received are put in the
memory, auto memory entry closes.
Preset Tuning
Recalling the stations in the memory.
1 Select the radio band
2 Enter Menu List mode
Press the [MENU] button.
3 Select a desired station in the memory
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “List & Memory” > Preset number.
Function of remote control
Direct Access Tuning
Tuning in a desired radio station by entering the
frequency.
1 Select the radio band
2 Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
“– – – –” is displayed.
3 Enter the frequency
Press the number buttons on the remote
control.
Example:
Desired frequency
92.1 MHz (FM)
810 kHz (AM)
Press button
[9], [2], [1]
[8], [1], [0]
4 Tune in to the entered frequency
Press the [4] or [¢] button.
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote
control.
⁄
• You can enter the FM band frequency in steps of a
minimum of 0.1 MHz.
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Settings” > “Auto Memory”.
4 Open Auto Memory Entry
Turn the [VOL] knob and press it when the
English |
21
Tuner Operation
PTY (Program Type)
Program Type Preset
Selecting the Program Type below and searching
for a station.
Putting the Program Type in the Preset button
memory and quick recall.
Program Type
Speech
Music
News
Current Affairs
Information
Sport
Education
Drama
Culture
Science
Varied
Pop Music
Rock Music
Easy Listening
Music
Light Classical
Display
“Speech”
“Music”
“News”
“Affairs”
“Info”
“Sport”
“Educate”
“Drama”
“Culture”
“Science”
“Varied”
“Pop M”
“Rock M”
“Easy M”
“Light M”
Program Type
Serious Classical
Other Music
Weather
Finance
Children’s programs
Social Affairs
Religion
Phone In
Travel
Leisure
Jazz Music
Country Music
National Music
Oldies Music
Folk Music
Documentary
Display
“Classics”
“Other M”
“Weather”
“Finance”
“Children”
“Social”
“Religion”
“Phone In”
“Travel”
“Leisure”
“Jazz”
“Country”
“Nation M”
“Oldies”
“Folk M”
“Document”
• Speech and Music include the Program type shown
below.
Speech: Items in the white letters.
Music: Items in the black letters.
1 Select the FM band
Press the [SEARCH MODE] button.
Select “FM1”, “FM2”, or “FM3”.
2 Enter Menu List mode
Press the [MENU] button.
3 Enter PTY mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “PTY Search”.
4 Select the Program Type
Turn the [VOL] knob.
5 Search for the selected Program Type station
Press the [4] or [¢] button.
6 Exit PTY mode
Press the [MENU] button.
⁄
• This function cannot be used during a traffic bulletin or
AM reception.
• When the selected Program Type is not found, “No PTY”
is displayed. Select another Program Type.
• The operation ends automatically if you do not operate
within 30 seconds.
22 |
KDC-BT60U/ KDC-6047U
Presetting the Program Type
1 Select the Program Type to preset
Refer to <PTY (Program Type)> (page 22).
2 Enter Program Type Preset mode
Press the [SEARCH MODE] button.
3 Select the number to put in the memory
Turn the [VOL] knob and press it for at least 2
seconds when the desired item is displayed.
Select preset number.
Recalling the preset Program Type
1 Enter PTY mode
Refer to <PTY (Program Type)> (page 22).
2 Enter Program Type Preset mode
Press the [SEARCH MODE] button.
3 Select a desired Program Type in the memory
Turn the [VOL] knob and press it when the
desired item is displayed.
Select preset number.
Changing Language for PTY Function
Selecting the Program Type display language as
follows.
Language
English
Spanish
French
Dutch
Display
“English”
“Spanish”
“French”
“Dutch”
Language
Norwegian
Portuguese
Swedish
German
Display
“Norwegian”
“Portuguese”
“Swedish”
“German”
1 Enter PTY mode
Refer to <PTY (Program Type)> (page 22).
2 Enter Changing Language mode
Press the [VOL] button.
3 Select the language
Turn the [VOL] knob and press it when the
desired item is displayed.
Select a language.
Function of KDC-BT60U
KDC-6047U with KCA-BT200 (Optional Accessory)
Bluetooth Audio Operation
Basic Operation
SRC MENU VOL
4 38 ¢
/ TI
Selecting Bluetooth Audio source
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select the “BT Audio” display.
✍✍SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
Connecting a Bluetooth Device
Pause and play
Press the [38] button.
Before use the Bluetooth device, you need to
connect Bluetooth device to this unit.
Music Search
Press the [4] or [¢] button.
Pairing (Registering from Bluetooth devices)
To make your Bluetooth Audio player usable with
this unit, you need to register it (pairing).
1 Turn on this unit
Press the [SRC] button.
2 Start registering this unit by operating the
Bluetooth device
By operating the Bluetooth device, register the
audio player (pairing). Select “KENWOOD BT CD/R4P1”/ “KCA-BT200” from the list of connected units.
⁄
• All or some of the operations above cannot be
performed if the Bluetooth audio player is not ready for
remote control.
• Switching between Bluetooth audio sources does
not start or stop playback automatically. Perform the
operation for starting or stopping playback.
• Some audio players cannot be controlled remotely or
reconnected after Bluetooth disconnection. Operate the
main unit of the audio player to connect Bluetooth.
3 Enter a PIN code
Input the PIN code (“0000”) in the Bluetooth
device.
Check that registration is complete on the
Bluetooth device.
✍✍PIN code is set to “0000” as the default. You can
change this code. Refer to <Registering PIN
Code> (page 48).
4 By operating the Bluetooth device, start
Bluetooth connection.
⁄
• If pairing does not succeed, try followings.
–P
IN code is set to “0000”. See <Registering PIN Code>
(page 48)
– Turn off the power of this unit and turn it back on. And
then try the pairing operation again.
– If other audio players have been registered, delete
them. And then try the pairing operation again. See
<Deleting a Registered Bluetooth device> (page 49)
• When registering from this unit, refer to <Registering
Bluetooth device> (page 47).
• For details on the Bluetooth Audio player which can be
connected, see <About the Bluetooth Audio player>
(page 57).
English |
23
Function of KDC-BT60U
KDC-6047U with KCA-BT200 (Optional Accessory)
Operation of hands-free phoning
SEARCH MODE
SRC MENU VOL
⁄
• When registering from this unit, refer to <Registering
Bluetooth device> (page 47).
• For details on the Bluetooth cell-phone with the handsfree function, see <About the Cell-Phone> (page 57).
4 38 ¢
/ TI
Connecting a Bluetooth Device
Before use the Bluetooth device, you need to
connect Bluetooth device to this unit. The following
3 steps procedure is necessary.
Step 1. P
airing (Registering from Bluetooth
devices)
To make your Bluetooth device (cell-phone) usable
with this unit, you need to register it (pairing).
Receiving a Call
Answering a Phone Call
Press the [VOL] knob.
⁄
• The following operations disconnect the line:
- Insert a CD.
- Connect a USB device.
• The name of the calling party is displayed if it has already
been registered in the Phone Book.
1 Turn on this unit
Rejecting an Incoming Call
Press the [SRC] button or press the [
button for at least 1 second.
2 Start registering a this unit by operating the
During a Call
Press the [SRC] button.
Bluetooth device
By operating the Bluetooth device, register the
hands-free unit (pairing). Select “KENWOOD BT
CD/R-4P1”/ “KCA-BT200” from the list of connected
units.
3 Enter a PIN code
Input the PIN code (“0000”) in the Bluetooth
device.
Check that registration is complete on the
Bluetooth device.
✍✍PIN code is set to “0000” as the default. You can
change this code. Refer to <Registering PIN
Code> (page 48).
4 By operating the Bluetooth device, start handsfree connection.
Step 2. Connection
If you have registered 2 or more cell-phones, you
need to select one of them. For more details,
see <Selecting the Bluetooth device You Wish to
Connect> (page 48).
When a cell-phone is connected, the “BT” indicator
is light up.
Step 3. Hands-free phoning
You can do hand-free phoning when the
connection is made.
24 |
KDC-BT60U/ KDC-6047U
Disconnecting a Call
Press the [SRC] button or press the [
button for at least 1 second.
] / [TI]
] / [TI]
Switching to the Private Mode
Press the [38] knob.
Switches between Private talk (“PRIVATE”) and
Hands-free talk each time this button is pressed.
⁄
• Depending on the type of your cell-phone, switching
to the private talk mode may select the source that was
used before commencing the hands-free connection.
If this happens, the source cannot be switched back to
the hands-free talk mode by operating this unit. Operate
your cell-phone to return to the hands-free talk mode.
Adjusting the Voice Volume during a Call
Turn the [VOL] knob.
Call Waiting
Answering Another Incoming Call with the
Current Call Suspended
1 Press the [VOL] knob.
2 Turn the [VOL] knob and press it when the
desired item is displayed.
Select “ANSWER”.
Answering another Incoming Call after
Terminating the Current Call
Press the [SRC] button.
Continuing the Current Call
1 Press the [VOL] knob.
2 Turn the [VOL] knob and press it when the
desired item is displayed.
Select “REJECT”.
Answering the Waiting Call after Terminating
the Current Call
Press the [SRC] button.
Switching between the Current Call and Waiting
Call
Press the [VOL] knob.
Each pressing of this knob switches the calling
party.
Other Functions
Clearing the Disconnection Message
KDC-BT60U Press the [
] button.
KDC-6047U Press the [TI] button for at least 1 second.
“HF Disconnect” disappears.
Making a Call
1 Enter Bluetooth mode
KDC-BT60U Press the [
] button.
KDC-6047U Press the [TI] button for at least 1 second.
Speed Dialing (Preset Dial)
1 Enter Bluetooth mode
KDC-BT60U Press the [
] button.
KDC-6047U Press the [TI] button for at least 1 second.
2 Select the preset dial mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Preset call”.
3 Select the number you want to recall from the
memory
Turn the [VOL] knob and press it when the
desired item is displayed.
Select preset number.
Phone number is displayed.
4 Exit the preset dial mode
Press the [MENU] knob.
5 Make a call
Press the [VOL] knob.
⁄
• You need to register the preset dial number. Refer to
<Registering to the Preset Dial Number List> (page 27).
KDC-BT60U Press the [
] button.
KDC-6047U Press the [TI] button for at least 1 second.
2 Select a dialing method
Turn the [VOL] knob and press it when the
desired item is displayed.
Display
“Preset Call”
“Phonebook”
“In Call”
“Out Call”
“Missed Call”
“Number Dial”
Overview
Calling a number in the preset.
Selecting the initial to be searched for the phone
book.
Calling a number in the incoming call list.
Calling a number in the outgoing call list.
Calling a number in the missed calls list.
Making a call by entering phone number.
Operation method of each mode is described
below.
3 Exit the dialing method mode
English |
25
Function of KDC-BT60U
KDC-6047U with KCA-BT200 (Optional Accessory)
Operation of hands-free phoning
Calling a Number in the Phone Book
1 Enter Bluetooth mode
KDC-BT60U Press the [
] button.
KDC-6047U Press the [TI] button for at least 1 second.
2 Select the Phone Book mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Phonebook”.
3 Select the initial to be searched for
Operation type
Move to the next character.
Move to the next row.
Determine the selected initial.
Operation
Turn the [VOL] knob.
Press the [4] or [¢] button.
Press the [VOL] button for at least 1
second.
4 Select the name
Operation type
Operation
Move to the next phone
Turn the [VOL] knob.
number.
Determine the selected phone Press the [VOL] knob.
number.
✍✍Switching between Display Modes
Press the [DISP] button.
Pressing this button each time switches between
name and telephone number.
5 Make a call
Press the [VOL] knob.
⁄
• During search, a non-accent character such as “u” is
searched for instead of an accent character such as “ü”.
Calling a Number in the Call log
1 Enter Bluetooth mode
KDC-BT60U Press the [
] button.
KDC-6047U Press the [TI] button for at least 1 second.
2 Select the call log mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Out Call” (outgoing call), “In Call”
(incoming call), or “Missed Call” (missed call).
3 Select a name or phone number
Turn the [VOL] knob and press it when the
26 |
KDC-BT60U/ KDC-6047U
desired item is displayed.
✍✍Switching between Display Modes
Press the [DISP] button.
Pressing this button each time switches between
name and telephone number.
4 Make a call
Press the [VOL] knob.
⁄
• The outgoing call list and the incoming call list, and the
missed call list are the lists of calls originated from and
received at this unit. They are not the ones stored in the
cell-phone memory.
Dial a Number
1 Enter Bluetooth mode
KDC-BT60U Press the [
] button.
KDC-6047U Press the [TI] button for at least 1 second.
2 Select the number dial mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Number Dial”.
3 Enter a phone number
Operation type
Select the numbers.
Move to the next digit.
Delete the last digit.
Operation
Turn the [VOL] knob.
Press the [¢] button.
Press the [4] button.
• Press the number ([1] – [0]), #([FM]), *([AM]), or
+([¢]) button on the remote controller.
✍✍To erase the entered phone number digit
by digit:
Press the [4] button on the remote
controller.
4 Make a call
• Press the [VOL] knob.
• Press the [DIRECT] button on the remote
controller.
⁄
• You can input max 32 digits.
Function of KDC-6047U
Make a Voice Dialing Call
Registering to the Preset Dial Number
List
1 Enter voice recognition mode
1 Select the phone number you wish to register
Press the [VOL] knob for at least 1 second.
2 “PB Name?” is displayed.
When a beep is heard, say the name within 2
seconds.
3 “PN Type” is displayed.
When a beep is heard, say the category name
within 2 seconds.
4 Make a call
Press the [VOL] knob.
✍✍This step is the same as step 4 of the procedure
in <Calling a Number in the Phone Book> (page
26). You can make a call or select a category.
⁄
• If your voice cannot be recognized, a message is
displayed. Pressing the [VOL] knob allows you to retry
voice input. Refer to <Troubleshooting Guide> (page 68).
• Both the name and category require registration of
a voice tag. Refer to <Setting a Voice Command for
Category> (page 50).
• Audio sound is not output during voice recognition.
Select the phone number with reference to the
following:
- Calling a Number in the Phone Book (page 26)
- Calling a Number in the Call log (page 26)
2 Enter Preset Memory mode
Press the [VOL] button for at least 2 seconds.
3 Select the Preset number to put in the
memory
Turn the [VOL] knob and press it for at least 1
second when the desired item is displayed.
Select preset number.
4 Determine the Preset number to put in the
memory
Turn the [VOL] knob and press it when the
desired item is displayed.
Exit the Preset Memory mode
Press the [MENU] button.
Display of Phone Number type
(category)
The category items in the Phone Book are displayed
as follows:
Display
“GENERAL” / “
”
Information
General
“HOME” / “
”
Home
“OFFICE” / “
”
Office
“MOBILE” / “
”
Mobile
“OTHER” / “
”
Other
English |
27
Display Settings
SRC MENU VOL
Display Setting
You can select following Display Setting items.
1 Select the source
4
¢
Basic Operation
Switching display
Press the [DISP] button.
Mode
5-line display mode
3-line display mode
iPod-like display
mode
Spectrum analyzer
display mode
Clock display mode
Display Type
Displays 4 to 5 lines of text.
Displays 2 to 3 lines of text.
Displays like iPod. (iPod source only)
Displays a line of text and the spectrum analyzer.
Displays the clock.
⁄
•When the 5-line display mode is selected, the status (ON/OFF
indicator of each function) can be displayed on the first line,
and the icon of the currently selected source and the text
information title can be displayed on the left side by the
following <Customization of 5-line Display Mode & 3-line
Display Mode & iPod-like Display Mode> (page 30) operation.
Status display: Select “Settings” > “DISP & ILLUMI” > “Display
Select” > “Status”
Side display: Select “Settings” > “DISP & ILLUMI” > “Display
Select” > “Side Select”
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
✍✍SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
2 Enter Menu List mode
Press the [MENU] button.
3 Enter Display Setting mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Settings” > “DISP & ILLUMI”.
4 Select the Menu item
Turn the [VOL] knob and press it when the
desired item is displayed.
Display
“Settings”
“DISP & ILLUMI”
“Display Select”
“Color Select”
“Display Off
Mode”
“Display
Dimmer”
Text scroll
Press the [DISP] button for at least 1 second.
The displayed text scrolls.
“Contrast”
“DISP N/P”
“TEXT Scroll”
“ILLUMI
Dimmer”
28 |
KDC-BT60U/ KDC-6047U
Overview
Making Display and Illumination settings.
Selecting and customizing the Display type.
Selecting the Illumination Color of the panel.
Refer to <Illumination Color Selection>
(page 32)
If this unit is not operated at least 5 seconds
with “OFF” selected, the display turns off. During
a setup mode, the display will not turn off even
if 5 seconds lapse.
“OFF”/ “ON”
Reduces the display Illumination brightness.
“Auto”: Dims the illumination in conjunction
with the Light switch of the vehicle.
“Manual1”: Dims the illumination constantly.
“Manual2”: Dims the illumination darker than
Manual1.
“OFF”: Does not dim the illumination.
Adjusting the display contrast.
“1” - “5” - “12”
Switches the panel display between positive
or negative.
“POSI1”/ “POSI2”/ “NEGA1”/ “NEGA2”
Specifies whether the text is scrolled
automatically.
“Auto”/ “Manual”
Reduces the key Illumination brightness.
“Auto”: Dims the illumination in conjunction
with the Light switch of the vehicle.
“Manual1”: Dims the illumination constantly.
“Manual2”: Dims the illumination darker than
Manual1.
“OFF”: Does not dim the illumination.
“ILLUMI Effect” Sets whether the key illumination brightness is
changed in conjunction with the key operation.
“OFF”/ “ON”
“ILLUMI MSC Sets whether the key illumination color is
SYNC”
changed in conjunction with the sound volume.
“OFF”/ “ON”
(
: Factory setting)
5 Make a setting
• W
hen the “ PUSH ” icon is displayed (at the
right edge of the display)
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.
• When the “ PUSH ” icon is not displayed
Press the [4] or [¢] button to select a
setting value.
6 Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
English |
29
Display Settings
Customization of 5-line Display Mode
& 3-line Display Mode & iPod-like
Display Mode
You can customize the display of the 5-line display
mode, 3-line display mode, and iPod-like display
mode.
1 Select the source
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
✍✍SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
2 Enter Menu List mode
Press the [MENU] button.
3 Enter Display Setting mode and Select the
5-line display mode, 3-line display mode or
iPod-like display mode.
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Settings” > “DISP & ILLUMI” > “Display
Select” > “Type Select” > 5-line display mode
or 3-line display mode or iPod-like display
mode.
Turn the [VOL] knob and press it when the
desired item is displayed.
“Side Select”
“Text Select”
“Status”
Setting
Selects from 5-line display mode, 3-line display
mode, or iPod-like display mode.
Sets the side display.
Text/ Icon/ Disappear
Sets the text display.
1. Turn the [VOL] knob to select the text
display part
The selected text display part blinks.
2. Press the [4] or [¢] button to
select the text
Sets the Status display of the 5-line display mode.
Appear/ Disappear
(
: Factory setting)
5 Make a setting
Press the [4] or [¢] button.
6 Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
30 |
KDC-BT60U/ KDC-6047U
Radio text (“Radio Text”)
Spectrum analyzer & Clock
(“Speana/Clock”)
Date (“Date”)
Blank (“Blank”)
* Information of Radio text plus is displayed.
3-line display mode
Frequency & Program Service
name (“Frequency/PS”)
Song title & Artist name*
(“Title/Artist”)
Station name* (“Station Name”)
Radio text plus* (“Radio Text
Plus”)
Radio text (“Radio Text”)
Spectrum analyzer & Clock
(“Speana/Clock”)
Date (“Date”)
Blank (“Blank”)
* Information of Radio text plus is displayed.
In AM Tuner source
Frequency (“Frequency”)
Spectrum analyzer & Clock
(“Speana/Clock”)
Date (“Date”)
Blank (“Blank”)
In USB/ iPod/ Audio file source
4 Select the setting item to adjust
Display
“Display Select”
“Type Select”
Text Display Selection
In FM Tuner source
Frequency & Program Service
name (“Frequency/PS”)
Song title* (“Song Title”)
Artist name* (“Artist Name”)
Station name* (“Station Name”)
Radio text plus* (“Radio Text
Plus”)
5-line display mode
Song title (“Song Title”)
Album name (“Album Name”)
Artist name (“Artist name”)
Folder name (“Folder name”)
File name (“File name”)
Play time (“P-Time”)
Play time bar (“Time Bar”) : iPod
only
Spectrum analyzer & Clock
(“Speana/Clock”)
Date (“Date”)
Blank (“Blank”)
3-line display mode
Ttitle & Artist (“Artist/Ttitle”)
Album & Artist (“Artist/Album”)
Folder name (“Folder name”)
File name (“File name”)
Play time (“P-Time”)
Play time bar (“Time Bar”) : iPod
only
Spectrum analyzer & Clock
(“Speana/Clock”)
Date (“Date”)
Blank (“Blank”)
iPod-like display mode
Song title (“Song Title”)
Album name (“Album Name”)
Artist name (“Artist name”)
Blank (“Blank”)
In Music CD source
Disc title (“Disc title”)
Track title (“Track title”)
Play time (“P-Time”)
Spectrum analyzer & Clock
(“Speana/Clock”)
Date (“Date”)
Blank (“Blank”)
In Auxiliary input source
Source name (“Source Name”)
Spectrum analyzer & Clock
(“Speana/Clock”)
Date (“Date”)
Blank (“Blank”)
In Standby
Source name (“Source Name”)
Date (“Date”)
Clock (“Clock”)
Blank (“Blank”)
In Bluetooth audio source (KDC-BT60U only)
5-line display mode
Bluetooth audio (“Source Name”)
Song title (“Song Title”)
Artist name (“Artist name”)
Album name (“Album Name”)
Spectrum analyzer & Clock
(“Speana/Clock”)
Date (“Date”)
Blank (“Blank”)
3-line display mode
Bluetooth audio (“Source Name”)
Ttitle & Artist (“Artist/Ttitle”)
Album & Artist (“Artist/Album”)
Spectrum analyzer & Clock
(“Speana/Clock”)
Date (“Date”)
Blank (“Blank”)
In Disc changer source (Optional)
Disc title (“Disc title”)
Spectrum analyzer & Clock
(“Speana/Clock”)
Track title (“Track title”)
Date (“Date”)
Play time (“P-Time”)
Blank (“Blank”)
⁄
• If the selected display item does not have any information,
alternative information is displayed.
• Some items cannot be selected depending on the display
type and row.
• When selecting “Folder name” while playing with iPod,
names will be displayed depending on currently selected
browsing items.
• If the iPod Control by Hand Mode is set to on while playing
the iPod, “iPod by Hand Mode” is displayed.
• If all characters cannot be displayed while playing with iPod,
the file number in the list is displayed.
Information
Music title
Folder name
File name
Customization of Spectrum Analyzer
Display Mode
You can customize the display of the Spectrum
analyzer display mode.
1 Select the source
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
✍✍SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
2 Enter Menu List mode
Press the [MENU] button.
3 Enter the Display Setting mode and select the
Spectrum analyzer display mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Settings” > “DISP & ILLUMI” > “Display
Select” > “Type Select” > Spectrum analyzer
display mode.
4 Select the setting item to adjust
Turn the [VOL] knob and press it when the
desired item is displayed.
Display
“Display Select”
“Type Select”
“Graphic
Select”
“Text Select”
Setting
Selects the Spectrum analyzer display mode.
Changes the display of the Spectrum analyzer
display mode.
Sets the text display.
5 Make a setting
Press the [4] or [¢] button.
6 Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Display
“TITLE***”
“FLD***”
“FILE***”
English |
31
Display Settings
Illumination Color Selection
Auxiliary Input Display Setting
Selecting the Illumination Color of the panel.
Selecting the display when changing to Auxiliary
input source.
1 Enter Menu List mode
1 Select the AUX source
Press the [MENU] button.
2 Enter Illumination color selection mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Settings” > “DISP & ILLUMI” > “Color
Select”.
3 Select the place where you want to set the
Illumination Color
Turn the [VOL] knob and press it when the
desired item is displayed.
Place
Display and key
Display
Key
Display
“All”
“Display”
“Key”
4 Select the Illumination Color
Turn the [VOL] knob and press it when the
desired item is displayed.
Select the color from “Variable Scan”/ “Color1” —
“Color 10”/ “User”.
Creating “User” color
You can create your original color during the
selection from “Color1” — “Color 10.”
The color you created can be called when you
select “User”.
1.Press the [VOL] knob for at least 1 second.
Enter the detail color adjustment mode.
2.Set the color.
Operation type
Operation
To select the color to adjust. Press the [4] or [¢] button.
(red, green, or blue)
To adjust color.
Turn the [VOL] knob.
(Range: 0 – 9)
3.Press the [VOL] knob.
Exit the detail color adjustment mode.
5 Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
32 |
KDC-BT60U/ KDC-6047U
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select the “AUX” display.
✍✍SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
2 Enter Menu List mode
Press the [MENU] button.
3 Enter Auxiliary input display setting mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Settings” > “AUX Name Set”.
4 Select the Auxiliary input display
Turn the [VOL] knob.
Select “AUX”, “DVD”, “PORTABLE”, “GAME”, “VIDEO”, or
“TV”
5 Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
⁄
• The Auxiliary input display can be set only when the
built-in auxiliary input or the auxiliary input of optional
KCA-S220A is used. On the KCA-S220A, “AUX EXT” is
displayed by default.
• AUX source is initially set to “OFF”. Before display setting,
set “Built in AUX” described in <Initial Settings> (page 34)
to “ON”.
Clock and Other Functions
Release
3.Turn the [VOL] knob to adjust the month.
4.Press the [¢] button.
5.Turn the [VOL] knob to adjust the day.
6.Press the [VOL] knob.
MENU VOL
7 Enter Date format mode
SRC 4
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Date Mode Select”.
¢
8 Select Date format
Clock and Date Adjustment
You can adjust the clock and date.
Display
Overview
“Settings”
“Clock & Date”
“Clock Adjust”
Sets the clock.
“Time Synchronized” Synchronizing the RDS station time data
and this unit’s clock.
“OFF”/ “ON”
“Date Adjust”
Sets the date.
“Date Mode Select” Sets the date display mode.
(
Turn the [VOL] knob and press it when the
desired item is displayed.
Select from 7 types.
9 Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
: Factory setting)
1 Enter Menu List mode
Press the [MENU] button.
2 Select RDS’s automatic time adjustment
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Settings” > “Clock & Date” > “Time
Synchronize” > “ON” or “OFF”.
When selected “OFF”, proceed to step 3.
When selected “ON”, proceed to step 5.
3 Enter Clock adjustment mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Settings” > “Clock & Date” > “Clock
Adjust”.
4 Adjusting Clock
1.Turn the [VOL] knob to set the hours.
2.Press the [¢] button.
3.Turn the [VOL] knob to set the minutes.
4.Press the [VOL] knob.
5 Enter Date adjustment mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Date Adjust”.
6 Adjusting Date
1.Turn the [VOL] knob to adjust the year.
2.Press the [¢] button.
English |
33
Clock and Other Functions
Initial Settings
You can select following Initial Setting items.
1 Select the Standby
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select the “STANDBY” display.
✍✍SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
2 Enter Menu List mode
Press the [MENU] button.
3 Enter Initial Setting mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Initial Settings”.
4 Select the setting item to adjust
Turn the [VOL] knob.
Display
“Initial Settings”
“SRC Select”
Overview
Sets the source selection method.
“Settings 1”/ “2”
“Beep”
Setting the operation check sound (beep sound)
ON/OFF.
“OFF”/ “ON”
“Russian”
When this is set to ON, the following character
strings are displayed in Russian:
Folder name/ File name/ Song title/ Artist
name/ Album name/ KCA-BT200 (optional
accessory)
“OFF”/ “ON”
“Menu Language” You can select the display language for the
Menu list item.
“English”/ “Français”/ ”Español”/ “Deutsch”/
“Italiano”/ “Pyccкий”
“Power OFF Wait” Setting the timer to turn this unit’s power OFF
automatically when Standby mode continues.
Using this setting can save the vehicle’s battery
power.
“-----”/: Power OFF Timer function is OFF.
“20min”/ “40min”/ “60min”: Turns the power
OFF after minutes.
“Built in AUX”
When this is set to ON, AUX source can be
selected.
“ON”: Allows AUX source to be selected. Use
this setting when the built-in AUX terminal
is connected to the external equipment all
the time.
“OFF”: Disable AUX source selection. Use this
setting when the built-in AUX terminal is
not used.
34 |
KDC-BT60U/ KDC-6047U
“Forced CD-DA”
Sets the CD read mode.
“Settings 1”: Automatically distinguishes
between audio file disc and music CD when
playing disc.
“Settings 2”: Forces playing as music CD.
“Favorite Delete” Deletes Favorite Preset Memory.
Refer to <Favorite Preset Memory Delete>
(page 44).
“Built in AMP”
Selecting “OFF” turns off the built-in amplifier.
Turning off the built-in amplifier improves the
quality of the sound from Preout.
“OFF”/ “ON”
“DSI”
DSI (Disabled System Indicator) of the unit blinks
when the faceplate is removed.
“OFF”/ “ON”
(
: Factory setting)
5 Make a setting
• W
hen the “ PUSH ” icon is displayed (at the
right edge of the display)
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.
• When the “ PUSH ” icon is not displayed
Press the [4] or [¢] button to select a
setting value.
6 Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Demonstration mode Setting
Theft Deterrent Faceplate
Turning the demonstration mode ON/OFF.
The faceplate of the unit can be detached and
taken with you, helping to deter theft.
1 Enter Menu List mode
Press the [MENU] button.
2 Enter Demonstration mode setting
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “DEMO Mode”.
3 Set the Demonstration mode
Removing the Faceplate
1 Press the Release button.
Drop open the faceplate.
2 Drawing the faceplate to left side pull it to
forward and remove it.
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “ON” or “OFF”.
4 Exit Menu List mode
Press the [MENU] button.
Function of KDC-6047U
Muting volume upon reception of
Phone call
The audio system automatically mutes when a call
comes in.
When a call comes in
“CALL” is displayed.
The audio system pauses.
Listening to the audio during a call
Press the [SRC] button.
The “CALL” display disappears and the audio system
comes back ON.
¤
• The faceplate is a precision piece of equipment and can
be damaged by shocks or jolts.
• Keep the faceplate in its faceplate case while detached.
• Do not expose the faceplate (and the faceplate case) to
direct sunlight or excessive heat or humidity. Also avoid
places with too much dust or the possibility of water
splashing.
Reattaching the Faceplate
3 Align the shaft on the unit with the depression
on the faceplate.
When the call ends
Hang up the phone.
The “CALL” display disappears and the audio system
comes back ON.
⁄
• To use the TEL Mute feature, you need to hook up the MUTE
wire to your telephone using a commercial telephone
accessory. Refer to <Connecting Wires to Terminals> (page
63).
4 Push the faceplate in until it clicks.
The faceplate is locked in place, allowing you to
use the unit.
English |
35
Audio Adjustments
SRC MENU VOL
“2Zone”
“2Zone Select”
“Preset”
Sets the Dual Zone System.
- Dual Zone System (page 39).
Sets the audio preset.
- Audio Preset Memory (page 42).
- Audio Preset Recall (page 43).
(
4
¢
Audio Control
You can adjust following Audio Setting items.
Display
“SubWoofer Level”
“DSP Set”
“Equalizer”
“Bass Boost”
“HIGHWAY-SOUND”
“Supreme+”
“Position”
“Balance”
“Fader”
“2Zone Rear Volume”
“SubWoofer”
“Detailed Setup”
“Car Type”
“Speaker”
“Car Type Adjust”
“X'Over”
“Volume offset”
36 |
Overview
You can set subwoofer level.
“–15” — “0” — “+15”
“Bypass”: Disables the DSP function.
“Through”: Enables the DSP function.
Sets the sound quality.
- Preset Equalizer curve Select (page 37).
- Manual Equalizer Control (page 37).
Sets the Bass Boost level in two steps.
“OFF”/ “Step1” – “2”
Compensates the low volume or bass sound
being lost by road noises to make vocal sound
clearer.
“OFF”/ “Step1”/ “2”/ “3”
Turns ON/OFF the Supreme plus function.
Can be set while Music CD source, Audio file
source of USB and iPod source.
“ON”/ “OFF”
Compensates the sound environment in
accordance with the listening position.
- Listening Position Selection (page 38).
- Listening Position Fine Adjustments (page
38).
Adjusts left/right speaker balance.
(Left) “L15” — “0” — “R15” (Right)
Adjusts front/rear speaker balance.
(Rear) “R1”5 — “0” — “F15” (Front)
Refer to <Dual Zone System> (page 39).
Turns on/off the subwoofer output.
“ON”/ “OFF”
To get clear sound, set the sound environment
according to the location and size of physically
installed speakers with reference to the
followings:
- Car Type Selection (page 40).
- Speaker Setting (page 40).
- Car Type Fine Adjustments (page 41).
- X’Over Setting (page 42).
Sets each source’s volume as a difference from
the basic volume.
“–8” — “±0” (AUX: “-8”— “+8”)
KDC-BT60U/ KDC-6047U
: Factory setting)
1 Select the source
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select a source other than “STANDBY”.
✍✍SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
2 Enter Audio Control mode
Press the [VOL] knob.
3 Select the setting item to adjust
Turn the [VOL] knob and press it when the
desired item is displayed.
4 Make a setting
Press the [4] or [¢] button to select a
setting value, and then press the [VOL] knob.
5 Exit Audio Control mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Remarks
• DSP Set
When “DSP Set” is set to “BYPASS”, the DSP function is
disabled , and the colored items can not be set.
• HIGHWAY-SOUND
Increases the volume of faintest sound being lost by road
noises to make the sound more audible. Additionally, it
accentuates bass sound being lost by road noises to make
the bass sound more dynamic.
• Supreme+ (Supreme Plus)
Technology to extrapolate and supplement with
proprietary algorithm, the high-frequency range that is cut
off when encoding. The bass and vocal sound that are cut
off by encoding are supplemented for the reproduction
of natural sound quality. Supplementing is optimized by
compression format (AAC, MP3 or WMA) and processed
according to bit rate. The effect is negligible with music
that is encoded at high bit rate, variable bit rate or has
minimal high frequency range.
The bass and vocal sound of Music CD/ iPod is also
supplemented.
• Dual Zone System
Main source and sub source (Auxiliary input) output Front
channel and Rear channel separately.
Preset Equalizer curve Select
Manual Equalizer Control
You can select following Equalizer curve.
You can adjust following Equalizer Control items.
Display
“Natural”
“User”
“Rock”
“Pops”
“Easy”
“Top 40”
“Jazz”
“Game”
“iPod”
Equalizer curve
Natural
User*
Rock
Pops
Easy
Top 40
Jazz
Game
iPod (During iPod source only)
* The Equalizer curve set in the section <Manual Equalizer
Control> is recalled.
( : Factory setting)
1 Select the source
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select a source other than “STANDBY”.
✍✍SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
2 Enter Audio Control mode
Press the [VOL] knob.
3 Enter Preset Equalizer mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Equalizer” > “Preset Equalizer”.
4 Select the Equalizer curve
Press the [4] or [¢] button.
✍✍Select the iPod Equalizer curve
You can select from 22 Equalizer curve types for
iPod when “iPod” is selected.
1.Enter iPod Equalizer mode
Press the [VOL] knob.
2.Select the iPod Equalizer curve
Press the [4] or [¢] button and press it
when the desired item is displayed.
Band
“BAND1” (62.5 Hz)
“BAND2” (250 Hz)
“BAND3” (1 kHz)
“BAND4” (4 kHz)
“BAND5” (16 kHz)
Item
“GAIN” Band level
“EFCT” Bass Effect
“GAIN” Band level
“GAIN” Band level
“GAIN” Band level
“GAIN” Band level
Range
-9 ­–+9 dB
“ON”/ “OFF”
-9 ­–+9 dB
-9 ­–+9 dB
-9 ­–+9 dB
-9 ­–+9 dB
(
: Factory setting)
1 Select the source
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select a source other than “STANDBY”.
✍✍SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
2 Enter Audio Control mode
Press the [VOL] knob.
3 Enter Manual Equalizer Control mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Equalizer” > “Manual Equalizer”.
4 Select the item you want to set
Operation type
Selects the item.
Adjust each item.
Set the value
Operation
Turn the [VOL] knob.
Press the [4] or [¢] button.
Press the [VOL] button.
5 Exit Audio Control mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
⁄
• When “iPod” is selected in the section <Preset Equalizer
curve Select> (page 37), Manual Equalizer Control is
disabled.
• You can select for each source.
5 Exit Audio Control mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
⁄
• You can select for each source.
English |
37
Audio Adjustments
Listening Position Selection
Listening Position Fine Adjustments
The sound environment can be compensated in
accordance with the selected position. According to
the listening position, select the position from the
following settings.
Making fine adjustment of the value specified at
Preset position selection per speaker.
Compensation seat
Not compensating.
Front-Left seat
Front-Right seat
Front seat
Display
“ALL”
“Front-Left”
“Front-Right”
“Front”
(
: Factory setting)
1 Select the source
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select a source other than “STANDBY”.
✍✍SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
1 Select the source
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select a source other than “STANDBY”.
✍✍SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
2 Enter Audio Control mode
Press the [VOL] knob.
3 Enter Manual position setting mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Position” > “DTA”.
4 Select the speaker you want to set
2 Enter Audio Control mode
Turn the [VOL] knob and press it when the
desired value is displayed.
3 Enter Preset position setting mode
Item
“FRONT” / “L”
“FRONT” / “R”
“REAR” / “L”
“REAR / “R”
“SUBWOOFER” / “L”
“SUBWOOFER” / “R”
“INITIAL”
Press the [VOL] knob.
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Position” > “Preset Position”.
4 Select the seat you want to compensate
Press the [4] or [¢] button.
5 Exit Audio Control mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Setting overview
Front Left speaker
Front Right speaker
Rear Left speaker
Rear Right speaker
Subwoofer Left
Subwoofer Right
Initialize the setting values.
5 Set the value
Press the [4] or [¢] button.
Adjust between 0 and 170 cm.
Press the [VOL] knob for at least 1 second if you
want to execute the “INITIAL”.
6 Exit Audio Control mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
38 |
KDC-BT60U/ KDC-6047U
Dual Zone System
Main source and sub source (Auxiliary input) output
Front channel and Rear channel separately.
Display
Overview
“2Zone Rear Volume”*1 Adjust the volume of Rear channel.
“0” — “35”
“Detailed Setup”
“2Zone”
Sets the Dual Zone System.
“OFF”/ “ON”
“2Zone Select”*1
Specifies the destination of sub source sound
when the Dual Zone function is turned on.
“Rear”/ “Front”
*1The Dual Zone System is set to “ON”.
(
: Factory setting)
1 Select the source
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select a source other than “STANDBY”.
✍✍SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
2 Enter Audio Control mode
Press the [VOL] knob.
3 Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Detailed Setup”.
4 Select the item you want to set
Turn the [VOL] knob and press it when the
desired item is displayed.
5 Exit Audio Control mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
⁄
•
•
•
•
Select Main source by [SRC] button.
Adjust the volume of Front channel by [VOL] knob.
The Audio Control has no effect on sub source.
There are following limitations when Dual Zone System
is enabled.
- There is no output from the subwoofer.
- “Fader”, “Subwoofer Level” of <Audio Control> (page 36)
and DSP function are not available.
• The Bluetooth audio source can be set exclusively to the
front speaker. Set “2Zone Select” to “Rear”.
English |
39
DSP Setup
Speaker Setting
SRC MENU VOL
The speaker X’Over is automatically set when the
position and size of each speaker are selected from
the following items.
Speaker
“FRONT”
4
¢
Car Type Selection
You can compensate the delay of the sound arrival
time by selecting your environment from the
following car types.
Display
“OFF”
“Compact”
“Sedan”
“Wagon”
“Minivan”
“SUV”
“Passenger Van”
Overview
Not compensating.
Compact car
Sedan
Station wagon
Minivan
Sport-utility vehicle
Passenger van
“SUB W”
(
: Factory setting)
1 Select the source
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select a source other than “STANDBY”.
✍✍SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
2 Enter Audio Control mode
Press the [VOL] knob.
3 Enter Cabin select mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Detailed Setup” > “Car Type”.
4 Select the car type
Press the [4] or [¢] button.
5 Set the value
Press the [VOL] button.
6 Exit Audio Control mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
⁄
• You can compensate the distances in more details by
using <Car Type Fine Adjustments> (page 41) function.
40 |
KDC-BT60U/ KDC-6047U
“REAR”
Item
“SIZE”
Range
Speaker Size Front
“O.E.M.”, “10cm”, “13cm”, “16cm”,
“17cm”, “18cm”, “4x6”, “5x7”, “6x8”,
“6x9”, “7x10”
“LOCATION” Speaker Location Front
“Door”, “On Dash”, “Under Dash”
“TWEETER” Speaker Size Tweeter
“None”, “Use”
“SIZE”
Speaker Size Rear
“None”, “O.E.M.”, “10cm”, “13cm”,
“16cm”, “17cm”, “18cm”, “4x6”, “5x7”,
“6x8”, “6x9”, “7x10”
“LOCATION” Speaker Location Rear
• “Door”, “Rear Deck”
• “2nd Row”, “3rd Row” (Car Type:
“Minivan”, “Passenger Van”)
“SIZE”
Speaker Size Subwoofer
“None”, “16cm”, “20cm”, “25cm”,
“30cm”, “38cm Over”
(
: Factory setting)
1 Select the source
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select a source other than “STANDBY”.
✍✍SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
2 Enter Audio Control mode
Press the [VOL] knob.
3 Enter Speaker setting mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Detailed Setup” > “Speaker”.
4 Select the item you want to set
Operation type
Selects the item.
Adjust each item.
Set the value
Operation
Turn the [VOL] knob.
Press the [4] or [¢] button.
Press the [VOL] button.
5 Exit Audio Control mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Car Type Fine Adjustments
Reference point
Adjusting fine tuning of the speaker position
compensation value specified at <Car Type
Selection> (page 40).
Display
“Front”
“Rear”
“SW”
Item
Front speaker
Rear speaker
Subwoofer
Range
0 – 440 cm
0 – 440 cm
0 – 440 cm
(
: Factory setting)
1 Select the source
+100cm
FRONT
80cm
REAR
REAR
150cm
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select a source other than “STANDBY”.
✍✍SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
2 Enter Audio Control mode
Press the [VOL] knob.
FRONT
50cm
+70cm
+0cm
SUB-W
5 Exit Audio Control mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
3 Enter Car Type Adjustment mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Detailed Setup” > “Car Type Adjust”.
4 Select the item you want to set
Operation type
Selects the item.
Adjust each item.
Set the value
Operation
Turn the [VOL] knob.
Press the [4] or [¢] button.
Press the [VOL] button.
The settings of the delay time are automatically
identified and compensated by specifying the
distances of each speaker from the center of the
vehicle interior.
1 Set the front and rear positions and the height
of the reference point to the position of the ears
of the person sitting in the front seat, and set
the right and left positions to the center of the
vehicle interior.
2 Measure the distances from the reference point
to the speakers.
3 Calculate the distance difference in accordance
with the farthest speaker.
English |
41
DSP Setup
X’Over Setting
Fine adjusting the following setting values
corresponding to the X’Over values set in the
section <Speaker Setting> (page 40).
Display
“X’Over”
“Front”
“Rear”
Range
“FC”
Front High Pass Filter
Through, 30, 40, 50, 60, 70, 80, 90,
100, 120, 150, 180, 220, 250 (Hz)
Front High Pass Slope
-6, -12, -18, -24 dB/Oct
Rear High Pass Filter
Through, 30, 40, 50, 60, 70, 80, 90,
100, 120, 150, 180, 220, 250 (Hz)
Rear High Pass Slope
-6, -12, -18, -24 dB/Oct
Subwoofer Low Pass Filter
30, 40, 50, 60, 70, 80, 90, 100, 120,
150, 180, 220, 250*, Through (Hz)
Subwoofer Slope
-6, -12, -18, -24 dB/Oct
Subwoofer Phase
Reverse (180°)/ Normal (0°)
“FC”
“SLOPE”
“SubWoofer” “FC”
“SLOPE”
“PHASE”
(
: Factory setting)
1 Select the source
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select a source other than “STANDBY”.
✍✍SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
2 Enter Audio Control mode
Press the [VOL] knob.
3 Enter X’Over setting mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Detailed Setup” > “X’Over”.
4 Select the speaker you want to set
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Front”, “Rear”, or “SubWoofer”.
5 Select the item you want to set
Operation type
Selects the item.
Adjust each item.
Set the value
Operation
Turn the [VOL] knob.
Press the [4] or [¢] button.
Press the [VOL] button.
6 Repeat steps 3 to 4 to complete the X’Over
settings.
7 Exit Audio Control mode
42 |
KDC-BT60U/ KDC-6047U
Audio Preset Memory
Registering the value setup by Sound Control.
Item
“SLOPE”
Press the [MENU] button for at least 1 second,
and then press it again briefly.
1 Setup Sound Control
Refer to the following operations to setup the
Sound Control.
- Car Type Selection (page 40)
- Speaker Setting (page 40)
- Car Type Fine Adjustments (page 41)
- X’Over Setting (page 42)
- Manual Equalizer Control (page 37)
- Listening Position Selection (page 38)
- Listening Position Fine Adjustments (page 38)
2 Enter Audio preset memory mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Detailed Setup” > “Preset” > “Memory”.
3 Select the number to put in the memory
Turn the [VOL] knob and press it when the
desired item is displayed.
Select a preset number.
4 Turn the [VOL] knob and press it when the
desired item is displayed.
Select “YES”.
“Memory Completed” is displayed.
5 Exit Audio Control mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
⁄
• Register 6 patterns of Audio Preset Memory.
• Preset number “1”:
When you press the Reset, all the sources will be the
setting value which is registered.
• Preset number “1” and “2”:
The memory cannot be erased by the Reset button.
• This function cannot be registered when the iPod
Equalizer set in <Preset Equalizer curve Select> (page 37).
Audio Preset Recall
Recalling the sound setup registered by <Audio
Preset Memory> (page 42).
1 Select the source
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select a source other than “STANDBY”.
✍✍SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
2 Enter Audio preset recall mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Detailed Setup” > “Preset” > “Recall”.
3 Select the number to recall in the memory
Turn the [VOL] knob and press it when the
desired item is displayed.
Select preset number.
4 Turn the [VOL] knob and press it when the
desired item is displayed.
Select “YES”.
“Recall Completed” is displayed.
5 Exit Audio Control mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
⁄
• The “User” of <Preset Equalizer curve Select> (page 37) is
changed to the value which was recalled.
• The Equalizer curve is changed to the value which was
recalled by the selected source.
English |
43
Favorite Control
• If the contents in iPod are changed after the FAVORITE
registration, the list registered in this unit becomes
different from that in iPod. In this case, perform the
FAVORITE registration again.
MENU VOL
Favorite Preset Recall
FAV
Registering the operation procedure to select your
favorite broadcast station or iPod Playlists/ Artists,
etc.
1 Display a favorite item
Menu list Setting
Audio control
Hands-free phone
Registerable items
Frequency
Browse item such as Playlists/ Artists/
Albums, etc.
Menu list Setting item
Audio control item
Telephone number retrieval.
“ FAV ” is displayed when the operation procedure
can be registered.
iPod setting
The desired list in the first hierarchy can be
registered.
1st hierarchy
iPod
2nd hierarchy
3rd hierarchy
PLAYLISTS
ARTISTS
ALL ARTISTS
ALBUMS
ARTISTS 1
ARTISTS 2
ALL ALBUMS
ARTISTS 3
ALBUM 1
ALBUM 2
COMPOSERS
ALBUM 3
AUDIOBOOKS
2 Enter Favorite Preset Memory mode
Press the [FAV] button for at least 1 second.
3 Select the number to put in the memory
Turn the [VOL] knob.
4 Put the Favorite Preset in the memory
Press the [VOL] knob.
Cancelling the Favorite Preset Memory mode
Press the [FAV] button.
⁄
• Registering the operation procedure to an existing
preset number overwrites the existing procedure.
• Register 6 of Favorite Preset Memory.
The memory cannot be erased by the Reset button.
44 |
KDC-BT60U/ KDC-6047U
1 Enter Favorite Preset Recall mode
Press the [FAV] button.
Favorite Preset Memory
Source
TUNER
iPod
Retrieving an item registered to Favorite.
2 Select the number to recall in the Favorite
memory
Turn the [VOL] knob and press it when the
desired item is displayed.
Select preset number.
Cancelling the Favorite Preset Recall mode
Press the [FAV] button.
⁄
• When iPod is selected for the source, the list selection
screen for Playlists/ Artists/ Albums, etc. is displayed.
Songs will not be automatically played.
Favorite Preset Memory Delete
Deleting an item registered to Favorite.
1 Select the Standby
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select the “STANDBY” display.
✍✍SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
2 Enter Menu List mode
Press the [MENU] button.
3 Enter Favorite Preset Memory Delete mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Initial Settings” > “Favorite Delete”.
4 Enter Favorite Preset Memory Delete mode
Press the [VOL] knob.
5 Select the number you want to delete
Turn the [VOL] knob and press it when the
desired item is displayed.
Select preset number.
“Delete?” is displayed.
Select “ALL” if you want to delete all.
6 Turn the [VOL] knob and press it when the
desired item is displayed.
Select “YES”.
“Completed” is displayed.
Exit Favorite Preset Memory Delete mode.
English |
45
Function of KDC-BT60U
KDC-6047U with KCA-BT200 (Optional Accessory)
Bluetooth Setup
“Auto Answer”
Answer a call automatically after lapse of the
preset time interval for automatic answer.
“OFF”/ “0s” – “8s” – “99s”
“Bluetooth HF/ You can specify output speakers for hands-free
Audio”
voice communication and Bluetooth audio
sound.
“FRONT”: Outputs voice from the front
speakers.
“ALL”: Outputs voice from the front and rear
speakers.
“Call Beep”
You can output a beep from the speaker when
a call comes in.
“ON”: Beep is heard.
“OFF”: Beep is canceled.
“BT F/W Update” Display the version of the firmware of this unit.
“Mic Gain”*1
Adjust the sensitivity of the microphone for a
telephone call. Adjust the voice of caller. Setting
to “+” increases the voice volume.
“–3” – “0” – “+3”
“NR Level”*1
Reduce the noises generated by surrounding
environment without changing the microphone
volume. Adjust the voice of caller when it is
not clear. Setting to “+” increases the noise
reduction.
“–3” – “0” – “+3”
“Echo Cancel
Adjust the level of echo cancellation. Setting to
LV“*1
“+” increases the echo cancel reduction.
“–2” – “0” – “+2”
MENU VOL
4 38 ¢
/ TI
Bluetooth Setting
You can select following Bluetooth Setting items.
1 Enter Bluetooth mode
KDC-BT60U Press the [
] button.
KDC-6047U Press the [TI] button for at least 1 second.
✍✍You can also select from “Settings” in Menu List
mode.
2 Turn the [VOL] knob and press it when the
desired item is displayed.
Select “BT Settings”.
3 Select the Menu item
Turn the [VOL] knob and press it when the
desired item is displayed.
Display
Overview
“BT Settings”
“Phone Selection” Select a cell-phone or Bluetooth audio player
“Audio Selection” connection.
Refer to <Selecting the Bluetooth device You
Wish to Connect> (page 48).
“SMS Download” Download a short message.
Refer to <Downloading the SMS> (page 52).
“SMS Inbox”
Display the received short message.
Refer to <SMS (Short Message Service)>
(page 52).
“Voice Tag”
Registers voice for voice recognition and voice
to select the Phone number category in Phone
book.
- Adding a Voice Dialing Command (page 50)
- Setting a Voice Command for Category (page
50)
“Detailed Setup” Move to detailed item.
“Device Regist.” Register a Bluetooth device (pairing).
Refer to <Registering Bluetooth device>
“SPCL DVC
(page 47).
Select”
“Device Delete” Cancel registration of the Bluetooth device.
Refer to <Deleting a Registered Bluetooth
device> (page 49).
“PIN Code Edit” Specify the PIN code required when registering
this unit using the Bluetooth device.
Refer to <Registering PIN Code> (page 48).
46 |
KDC-BT60U/ KDC-6047U
(
: Factory setting)
*1Function of KDC-BT60U
4 Make a setting
• W
hen the “ PUSH ” icon is displayed (at the
right edge of the display)
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.
• When the “ PUSH ” icon is not displayed
Press the [4] or [¢] button to select a
setting value.
5 Exit BT Settings mode
KDC-BT60U Press the [
] button.
KDC-6047U Press the [TI] button for at least 1 second.
Remarks
• “Auto Answer” (Setting the Time Interval for Automatic
Answer)
This function automatically answers (responds to) a call
after lapse of the preset time interval for automatic answer.
“OFF” : Does not answer the phone call automatically.
“0” : Automatically answers the phone call at once.
“1s” – “99s” : Automatically answers the phone call after
lapse of 1 – 99 seconds.
⁄
• If the time set in the cell-phone is shorter than that set in
the unit, the former will be used.
• This function does not work for call waiting.
• “Bluetooth HF/Audio” (Setting up the Voice Output
Speakers)
Select the speaker which is further from the microphone in
order to prevent howling or echoes.
• “BT F/W Update” (Displaying the Firmware Version)
Display the version of the firmware of this unit.
For how to update the firmware, access our web site.
http://www.kenwood.com/cs/ce/bt/
Registering Bluetooth device
To make your Bluetooth device (cell-phone) usable
with this unit, you need to register it (pairing). You
can register up to 5 Bluetooth devices to this unit.
Registering from this unit
1 Enter Bluetooth mode
KDC-BT60U Press the [
] button.
KDC-6047U Press the [TI] button for at least 1 second.
✍✍You can also select from “Settings” in Menu List
mode.
2 Enter Bluetooth device registration mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “BT Settings” > “Detailed Setup” >
“Device Regist.”.
Search for the Bluetooth device.
When search is completed, “Finished” is displayed.
3 Select a Bluetooth device
Turn the [VOL] knob and press it when the
desired item is displayed.
4 “Paring” is displayed (except KCA-BT200)
If “Pairing Success” is displayed, proceed to step 7.
If “PIN Code NG” is displayed, proceed to steps 5
to 6.
✍✍If the error message appears even though the
PIN code is correct, try <Registering Special
Bluetooth device>.
7 Return to the device list
Press the [MENU] knob.
8 Exit BT Settings mode
KDC-BT60U Press the [
] button.
KDC-6047U Press the [TI] button for at least 1 second.
⁄
• This unit allows up to eight digits to be input for a PIN
code. If a PIN code cannot be input from this unit, it can
be input from the Bluetooth device.
• If there are 5 or more Bluetooth devices registered, you
cannot register a new Bluetooth device.
Registering Special Bluetooth device
Allow registration of a special device that cannot be
registered normally (pairing).
1.Select Special device registration mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “BT Settings” > “Detailed Setup” > “SPCL
DVC Select”.
2.Enter Special device registration mode
Press the [VOL] knob for at least 1 second.
A list is displayed.
3.Select a device name
Turn the [VOL] knob and push the center when
the desired device name is displayed.
If “Completed” is displayed, registration is
completed.
4.Go through the procedure step 3 of
<Registering from this unit> and complete
the registration (pairing).
Cancelling Special device registration mode
Press the [MENU] button for at least 1 second.
⁄
• If the device name is not in the list, select “Other Phones”.
5 Input the PIN code
Operation type
Select the numbers.
Move to the next digit.
Delete the last digit.
Operation
Turn the [VOL] knob.
Press the [¢] button.
Press the [4] button.
6 Transmit the PIN code
Press the [VOL] knob for at least 1 second.
If “Pairing Success” is displayed, registration is
completed.
English |
47
Function of KDC-BT60U
KDC-6047U with KCA-BT200 (Optional Accessory)
Bluetooth Setup
Registering PIN Code
By operating the Bluetooth device, specify the PIN
code necessary for registering this unit.
1 Enter Bluetooth mode
KDC-BT60U Press the [
] button.
KDC-6047U Press the [TI] button for at least 1 second.
✍✍You can also select from “Settings” in Menu List
mode.
2 Enter PIN code edit mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “BT Settings” > “Detailed Setup” > “PIN
Code Edit”.
The current setting of PIN code is displayed.
3 Input the PIN code
Operation type
Select the numbers.
Move to the next digit.
Delete the last digit.
Operation
Turn the [VOL] knob.
Press the [¢] button.
Press the [4] button.
4 Register a PIN code
Press the [VOL] knob for at least 1 second.
If “Completed” is displayed, registration is
completed.
5 Exit BT Settings mode
KDC-BT60U Press the [
] button.
KDC-6047U Press the [TI] button for at least 1 second.
⁄
• By default, “0000” is specified.
• A PIN code can be specified with up to eight digits.
Selecting the Bluetooth device You
Wish to Connect
When two or more Bluetooth devices have already
been registered, you need to select the Bluetooth
device you wish to use.
1 Enter Bluetooth mode
KDC-BT60U Press the [
] button.
KDC-6047U Press the [TI] button for at least 1 second.
✍✍You can also select from “Settings” in Menu List
mode.
2 Select Bluetooth device selection mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Cell-phone
Select “BT Settings” > “Phone Selection”.
Audio player (KDC-6047U only)
Select “BT Settings” > “Audio Selection”.
3 Enter Bluetooth device selection mode
Press the [VOL] knob for at least 1 second.
“(name)” is displayed.
4 Select the Bluetooth device
Turn the [VOL] knob.
5 Set up the Bluetooth device
Press the [4] or [¢] button.
“✱(name)” or “-(name)” is displayed.
“✱”: The selected Bluetooth device is busy.
“-”: The selected Bluetooth device is on standby.
“ “ (blank): The Bluetooth device is deselected.
6 Exit BT Settings mode
KDC-BT60U Press the [
] button.
KDC-6047U Press the [TI] button for at least 1 second.
⁄
• If a Bluetooth device is already selected, deselect it, and
then select a different one.
• If you cannot select a device using the audio player,
connect the device with the audio player.
48 |
KDC-BT60U/ KDC-6047U
Deleting a Registered Bluetooth
device
You can delete a registered Bluetooth device.
1 Enter Bluetooth mode
KDC-BT60U Press the [
] button.
KDC-6047U Press the [TI] button for at least 1 second.
✍✍You can also select from “Settings” in Menu List
mode.
2 Enter Bluetooth device deletion mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “BT Settings” > “Detailed Setup” >
“Device Delete”.
“(name)” is displayed.
Downloading the Phone Book
Download the phone book data from the cellphone to this unit so that you can use the Phone
Book of this unit.
To download automatically
If the cell-phone supports a phone book
synchronization function, the phone book is
downloaded automatically after Bluetooth
connection.
⁄
• Setting on the cell-phone may be required.
• If no phone book data is found in the unit even after
the compete display, your cell-phone may not support
automatic download of phone book data. In this case, try
downloading manually.
To download from the cell-phone manually
3 Select the Bluetooth device
1 By operating the cell-phone, end the hands-free
4 Delete the selected Bluetooth device
2 By operating the cell-phone, send the phone
Turn the [VOL] knob.
Press the [VOL] knob.
5 Turn the [VOL] knob and press it when the
desired item is displayed.
Select “YES”.
“Delete” is displayed.
6 Exit BT Settings mode
KDC-BT60U Press the [
] button.
KDC-6047U Press the [TI] button for at least 1 second.
⁄
• When a registered cell-phone is deleted, its Phone Book,
log, SMS, and voice tag are also deleted.
connection.
book data to this unit
By operating the cell-phone, download the phone
book data to this unit.
• During downloading:
“Downloading” is displayed.
• After completion of downloading:
“Completed” is displayed.
3 By operating the cell-phone, start the handsfree connection.
To clear the downloading completion message
Press any button.
⁄
• Up to 1000 phone numbers can be registered for each
registered cell-phone.
• Up to 32 digits can be registered for each phone number
along with up to 50* characters representing a name.
(* 50: Number of alphabetic alphabetical characters.
Fewer characters can be input depending on the type
of characters.)
• To cancel downloading of the phone book data, operate
the cell-phone.
English |
49
Function of KDC-BT60U
KDC-6047U with KCA-BT200 (Optional Accessory)
Bluetooth Setup
Function of KDC-6047U
Adding a Voice Dialing Command
Add a voice tag to the phone book for voice dialing.
You can register up to 35 voice tags.
1 Enter Bluetooth mode
Press the [TI] button for at least 1 second.
✍✍You can also select from “Settings” in Menu List
mode.
2 Enter Phone book name edit mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “BT Settings” > “Voice Tag” > “PB Name
Edit”.
3 Search for the name to register
Select the name to register with reference to 4 in
<Calling a Number in the Phone Book> (page 26).
If a voice tag has already been registered for a
name, “*” is displayed before the name.
4 Select a mode
Turn the [VOL] knob.
Display
“PB Name Regist”
“PB Name Check”*
“PB Name Delete”*
“Return”
Operation
Register a voice tag.
Play a voice tag.
Delete a voice tag.
Return to step 2.
* Displayed only when a name for which a voice tag has
been registered is selected.
Select “PB Name Regist” (Regist)
5 Register a voice tag (first)
“Enter Voice 1” is displayed.
When a beep is heard, say a voice tag within 2
seconds.
6 Confirm the voice tag (second)
“Enter Voice 2” is displayed.
When a beep is heard, say the same voice tag as
that you said in step 6 within 2 seconds.
“Completed” is displayed.
7 End registration
Press the [VOL] knob.
Return to step 2. You can register another voice tag
continuously.
⁄
• If your voice cannot be recognized, a message is
displayed. Pressing the [VOL] knob allows you to retry
voice input. (page 52)
Select “PB Name Check” (Play)
50 |
KDC-BT60U/ KDC-6047U
5 Press the [VOL] knob.
Play the registered voice and return to step 2.
Select “PB Name Delete” (Delete)
5 Delete a voice tag
Press the [VOL] knob.
6 Turn the [VOL] knob to select “YES”, and then
press the [VOL] knob.
Exit BT Settings mode
Press the [TI] button for at least 1 second.
⁄
• Audio sound is not output during voice tag registration.
Function of KDC-6047U
Setting a Voice Command for
Category
Add a voice tag to the phone number category
(type) for voice calling.
1 Enter Bluetooth mode
Press the [TI] button for at least 1 second.
✍✍You can also select from “Settings” in Menu List
mode.
2 Enter Phone Number type edit mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “BT Settings” > “Voice Tag” > “PN Type
Edit”.
3 Select the category (type) you wish to set
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “General”, “Home”, “Office”, “Mobile”, or
“Other”
4 Select a mode
Turn the [VOL] knob.
Display
“PN Type Regist”
“PN Type Check”*
“PN Type Delete”*
“Return”
Operation
Register a voice tag.
Play a voice tag.
Delete a voice tag.
Return to step 2.
* Displayed only when a name for which a voice tag has
been registered is selected.
5 Register the category (type) by performing
steps 5 to 7 in <Adding a Voice Dialing
Command> (page 50).
6 Exit BT Settings mode
Press the [TI] button for at least 1 second.
⁄
• Set the voice tag for all the 5 categories. If the voice tag
is not registered for all the categories, the Phone book
may not be recalled by voice command.
English |
51
Function of KDC-BT60U
KDC-6047U with KCA-BT200 (Optional Accessory)
SMS (Short Message Service)
Downloading the SMS
SMS (Short Message Service)
Download the short message (SMS) arrived at the
cell-phone so that it can be read on this unit.
The SMS arrived at the cell-phone is displayed on
the receiver.
A newly arrived message is displayed.
1 Enter Bluetooth mode
KDC-BT60U Press the [
] button.
¤
KDC-6047U • To prevent car accidents, the driver should not read the
SMS while driving.
Press the [TI] button for at least 1 second.
✍✍You can also select from “Settings” in Menu List
mode.
When a new message arrives
“SMS Received” is displayed.
The display disappears with any operations.
2 Enter SMS download mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “BT Settings” > “SMS Download”.
3 Start downloading
Press the [VOL] knob.
“Downloading” is displayed.
When the downloading finishes, “Completed” is
displayed.
4 Exit BT Settings mode
KDC-BT60U Press the [
] button.
KDC-6047U Press the [TI] button for at least 1 second.
⁄
• The cell-phone must be able to transmit the SMS using
Bluetooth. Setting on the cell-phone may be required.
If the cell-phone does not support SMS function, the
SMS download item in Function Control mode is not
displayed.
• When the SMS is downloaded from the cell-phone, the
unopened messages in the cell-phone are opened.
• The already-read and unread short messages can be
respectively downloaded up to 75.
Displaying the SMS
1 Enter Bluetooth mode
KDC-BT60U Press the [
] button.
KDC-6047U Press the [TI] button for at least 1 second.
✍✍You can also select from “Settings” in Menu List
mode.
2 Enter SMS Inbox mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “BT Settings” > “SMS Inbox”.
A message list appears.
3 Select a message
Turn the [VOL] knob.
Each pressing of the [DISP] button switches
between telephone number or name and message
reception date.
4 Display the text
Press the [VOL] knob.
Turning the [VOL] knob scrolls the message.
Pressing the [VOL] knob again returns to the
message list screen.
5 Exit SMS Inbox mode
Press the [MENU] button.
6 Exit BT Settings mode
KDC-BT60U Press the [
] button.
KDC-6047U Press the [TI] button for at least 1 second.
⁄
• The unopened message is displayed at the beginning
of the list. Other messages are displayed in the order of
reception.
• The SMS that has arrived when the cell-phone is not
linked with Bluetooth cannot be displayed. Download
the SMS.
52 |
KDC-BT60U/ KDC-6047U
• The short message cannot be displayed during
downloading the SMS.
English |
53
Basic Operations of remote control
In Tuner source
VOL
SRC
• Band select: [FM]/[AM]
• Station select: [4]/[¢]
• Recall preset stations: [1] — [6]
ATT
ENT
5/∞
EXIT
AUD
AM
FM
0—9
DIRECT
(page 16, 19, 21, 26)
General control
• Volume control: [VOL]
• Source select: [SRC]
• Volume reduce: [ATT]
When the button is pressed again, the volume
returns to the previous level.
• Return to previous item: [ ]
• Exit from mode: [EXIT]
• Selection of item: [5]/[∞]
• Determination: [ENT]
• Enter Audio Control mode: [AUD]
54 |
KDC-BT60U/ KDC-6047U
In USB/Music CD/Audio file source
• Music select: [4]/[¢]
• Folder select: [FM]/[AM]
• Pause/Play: [ENT]
• Enter Menu List mode: [5]/[∞]
• Movement between folders/files during Search
mode: [5]/[∞]
• Return to previous folder: [ ]
In iPod source
• Enter Menu List mode: [5]/[∞]
• Movement between items during Music search
mode: [5]/[∞]
• Return to previous item: [ ]
• Music select: [4]/[¢]
Hands-free phone control
Preparing the remote control unit
Making a call
• Enter Bluetooth mode: [ ]
• Select a dialing method: [5]/[∞] ➜ [ENT]
• Number dial input:
Input a digit: [0] – [9]
Input “+”: [¢]
Input “#”: [FM]
Input “*”: [AM]
Clear the entered phone number: [4]
• Make a call: [DIRECT]
Pull the battery sheet out from the remote control
unit to the direction of the arrow.
Receiving a call
• Answer the call: [ ]
• Switch between the private talk mode and the
hands-free talk mode: [ENT]
Call waiting
• Answer Another Incoming Call with the Current
Call Suspended: [ ]
• Answer another Incoming Call after Terminating
the Current Call: [SRC]
• Continue the Current Call: [1]
Changing the battery of the remote control
unit
Keep on slide
Pull out
CR2025
(+side)
Use a commercially available button battery (CR2025).
Insert the battery with the + and – poles aligned
properly, following the illustration inside the case.
During a call
• End the call: [SRC]
¤ CAUTION
• Do not set the remote control in hot places such
as on the dashboard.
• Lithium battery.
Danger of explosion if the battery is incorrectly
replaced.
Replace only with the same or equivalent type.
• The battery pack or batteries shall not be exposed
to excessive heat such sunshine, fire or the like.
• Keep battery out of reach of children and in
original package until ready to use. Dispose of
used batteries promptly. If swallowed contact
physician immediately.
English |
55
Appendix
About Audio file
• Playable Audio file
AAC-LC (.m4a), MP3 (.mp3), WMA (.wma)
• Playable disc media
CD-R/RW/ROM
• Playable disc file format
ISO 9660 Level 1/2, Joliet, Romeo, Long file name.
Playable USB device
USB mass storage class
• Playable USB device file system
FAT16, FAT32
Although the audio files are complied with the
standards listed above, the play maybe impossible
depending on the types or conditions of media or
device.
• Playing order of the Audio file
In the example of folder/file tree shown below, the
files are played in the order from ① to ⑩.
^ :Folder
Folder
CD (1)
¡ :Audio
Audiofile
file
¡!
2
4
3
¡$
5
iPod/iPhone that can be connected to this
unit
Made for
• iPod nano (1st generation) • iPod nano (2nd generation)
• iPod nano (3rd generation) • iPod nano (4th generation)
• iPod nano (5th generation) • iPod with video
• iPod classic
• iPod touch (1st generation)
• iPod touch (2nd generation)
Works with
• iPhone
• iPhone 3G
• iPhone 3GS
¡%
• Update iPod/iPhone software to the latest version.
• Type of control available varies depending
on the type of connected iPod. See
www.kenwood.com/cs/ce/ipod/ for further details.
• The word “iPod” appearing in this manual indicates
the iPod or the iPhone connected with the iPod
connection cable* (optional accessory).
* Not supported model KCA-iP500.
Refer to the web site for connectable iPod and iPod
connection cable.
http://www.kenwood.com/cs/ce/ipod/
¡P
⁄
¡"
¡#
An online manual about audio files is put on the site,
www.kenwood.com/cs/ce/audiofile/. On this online
manual, detailed information and notes which are not
written in this manual are provided. Make sure to read
through the online manual as well.
⁄
• In this manual, the word “USB device” is used for flash
memories and digital audio players which have USB
terminals.
• If you start playback after connecting the iPod, the
music that has been played by the iPod is played
first.
In this case, “RESUMING” is displayed without
displaying a folder name, etc. Changing the browse
item will display a correct title, etc.
• You cannot operate iPod if “KENWOOD” or “✓”
displayed on iPod.
About USB device
• When the USB device is connected to this unit,
it can be charged up provided that this unit is
powered.
• Install the USB device in the place where it will not
prevent you from driving your vehicle properly.
• You cannot connect a USB device via a USB hub and
Multi Card Reader.
• Take backups of the audio files used with this unit.
The files can be erased depending on the operating
conditions of the USB device.
We shall have no compensation for any damage
arising out of erasure of the stored data.
• No USB device comes with this unit. You need to
purchase a commercially available USB device.
56 |
KDC-BT60U/ KDC-6047U
• When connecting the USB device, usage of the
CA-U1EX (option) is recommended.
Normal playback is not guaranteed when a cable
other than the USB compatible cable is used.
Connecting a cable whose total length is longer
than 5 m can result in abnormal playback.
About “KENWOOD Music Editor”
• This unit supports the PC application “KENWOOD
Music Editor Lite ver1.0” or later.
• When you use the audio file with database
information added by the “KENWOOD Music Editor
Lite ver1.0”, you can search a file by title, album or
artist name using the <File Search> (page 14).
• In the Instruction manual, the term “Music Editor
media” is used to mean the device that contains
audio files with database information added with
KENWOOD Music Editor.
• “KENWOOD Music Editor Lite ver1.0” is available from
the following web site:
www.kenwood.com/cs/ce/
• For further information on “KENWOOD Music Editor
Lite ver1.0”, refer to the site above or the application
help.
About the Bluetooth Audio player
This unit conforms to the following Bluetooth
specifications:
KDC-BT60U
Version
Profile
KDC-6047U
Version
Profile
Bluetooth Standard Ver. 2.1+EDR
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio/Video Remote Control Profile)
Bluetooth Standard Ver. 1.2
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio/Video Remote Control Profile)
⁄
• A2DP is a profile designed to transfer the music from an
audio player.
• AVRCP is a profile designed to control playback and
selection of music by an audio player.
About the Cell-Phone
This unit conforms to the following Bluetooth
specifications:
KDC-BT60U
Version
Profile
Bluetooth Standard Ver. 2.1+EDR
HFP (Hands Free Profile)
OPP (Object Push Profile)
PBAP (Phone Book Access Profile)
SYNC (Synchronization Profile)
KDC-6047U
You need to register your cell-phone to your
Bluetooth Unit beforehand. Make sure to read the
instruction manual of the Bluetooth Unit as well.
For the cell-phones verified for compatibility, access
the following URL:
http://www.kenwood.com/cs/ce/bt/
⁄
• The units supporting the Bluetooth function have been
certified for conformity with the Bluetooth Standard
following the procedure prescribed by Bluetooth
SIG. However, it may be impossible for such units to
communicate with your cell-phone depending on its type.
• HFP is a profile used to make a hands-free call.
• OPP is a profile used to transfer data such as a phone book
between units.
English |
57
Appendix
Menu List
Common function items
Display
“Clock & Date”
“Clock Adjust”
“Time Synchronized”
“Date Adjust”
“Date Mode Select”
“DISP & ILLUMI”
“Display Select”
“Type Select”
“Side Select”
“Text Select”
“Graphic Select”
“Status”
“Color Select”
“Display Off Mode”
“Display Dimmer”
“Contrast”
“DISP N/P”
“TEXT Scroll”
“ILLUMI Dimmer”
“ILLUMI Effect”
“ILLUMI MSC SYNC”
“RDS Settings”
“News”
“AF”
“RDS Regional”
“Auto TP Seek”
“DEMO Mode”
Page
33
–
–
30, 31
30
31
30
32
28
20
35
Function items appearing during standby
Display
Page
“Settings”
–
“Clock & Date”
–
“DISP & ILLUMI”
–
“Initial Settings”
–
“SRC Select”
34
“Beep”
“Russian”
“MENU Language”
“Power OFF Wait”
“Built in AUX”
“Forced CD-DA”
“Favorite Delete”
“Built in AMP”
“DSI”
58 |
KDC-BT60U/ KDC-6047U
Function items appearing when the iPod source
is selected
Display
Page
“Music”
8
“Playlists”
“Artists”
“Albums”
“Songs”
“Podcasts”
“Genres”
“Composers”
“Play Mode”
9
“iPod by Hand”
“Folder Random”
“All Random”
“File Repeat”
“Settings”
–
“Skip Search”
9
“Delete My PlalList”
“Clock & Date”
–
“DISP & ILLUMI”
–
“RDS Settings”
–
Function items appearing when the USB source
is selected
Display
Page
“Music”
14
“Play Mode”
15
“File Scan”
“Folder Random”
“File Repeat”
“Folder Repeat”
“Settings”
–
“Skip Search”
15
“Clock & Date”
–
“DISP & ILLUMI”
–
“RDS Settings”
–
Function items appearing when the Music CD/
Audio file source is selected
Display
Page
“Music”
17
“Play Mode”
18
“File Scan”
“Track Scan”
“Folder Random”
“Disc Random”
“Magazine Random”
“File Repeat”
“Folder Repeat”
“Track Repeat”
“Disc Repeat”
“Settings”
–
“Clock & Date”
–
“DISP & ILLUMI”
–
“RDS Settings”
–
Function items appearing when the Tuner
source is selected
Display
Page
“List & Memory”
21, 21
“FM1”
“FM2”
“FM3”
“AM”
“PTY Search”
22
“Settings”
–
“Local Seek”
20
“Seek Mode”
“Auto Memory”
21
“Forced MONO”
20
“News”
“AF”
“RDS Regional”
“Auto TP Seek”
“Clock & Date”
–
“DISP & ILLUMI”
–
Function items appearing when the Hands-Free
source is selected
Display
Page
“BT Settings”
–
“Phone Selection”
48
“Audio Selection”
“SMS Download”
52
“SMS inbox”
52
“Voice Tag”
50
“Detailed Setup”
–
“Device Regist.”
47
“SPCL DVC Select”
“Device Delete”
49
“PIN Code Edit”
48
“Auto Answer”
46
“Bluetooth HF/Audio”
“Call Beep”
“BT F/W Update”
“Mic Gain”
“NR Level”
“Echo Cancel LV“
“Clock & Date”
–
“DISP & ILLUMI”
–
“RDS Settings”
–
Function items appearing when the Bluetooth
Audio source is selected
Display
Page
“Settings”
–
“Audio Selection”
“Detailed Setup”
–
“Device Regist.”
47
“SPCL DVC Select”
“Device Delete”
49
“PIN Code Edit”
48
“BT F/W Update”
46
“Clock & Date”
–
“DISP & ILLUMI”
–
“RDS Settings”
–
Function items appearing when an AUX source
is selected
Display
Page
“Settings”
–
“AUX Name Set”
32
“Clock & Date”
–
“DISP & ILLUMI”
–
“RDS Settings”
–
English |
59
Appendix
Display Indicator items
Source Display
Overview
General "ATT"
Indicates that the attenuator is active.
“FAV”
Indicates that the Favorite can be registered.
Indicates that a disc is inserted.
iPod/USB/ “CD•IN”
CD/CD "SCAN"
Indicates that the Scan function is ON.
Changer "SCAN"
Indicates that the File Scan function is ON.
“RDM”
Indicates that the Disc Random function is ON.
“RDM”
Indicates that the Track/File Random function is ON.
“Fo•RDM” Indicates that the Folder Random function is ON.
“M•RDM” Indicates that the Magazine Random function is ON.
“ALL•RDM” Indicates that the All Random function is ON.
“PL•RDM” Indicates that the Playlist Random function is ON.
“DMS•RDM” Indicates that the DMS Random function is ON.
“DMS•REP” Indicates that the DMS Repeat function is ON.
“D•REP” Indicates that the Disc Repeat function is ON.
“T•REP”
Indicates that the Track Repeat function is ON.
“Fo•REP” Indicates that the Folder Repeat function is ON.
“Fi•REP” Indicates that the File Repeat function is ON.
“P•REP”
Indicates that the Playlist Repeat function is ON.
"REP"
Indicates that the Repeat function is ON.
“MP3”
Identifies the MP3 file.
“WMA”
Identifies the WMA file.
“AAC”
Identifies the AAC-LC file.
“MYLIST” Indicates that the My Playlist mode is selected now.
Tuner
“RDS”
Indicates the state of the RDS station when the AF
function is ON. (On: RDS is being received. Blinking: RDS
is not being received.)
"ST"
Indicates that stereo broadcast is being received.
"TI"
Indicates the reception state of traffic information. (On: TI
is being received. Blinking: TI is not being received.)
Hands- “C-Wait” Indicates call-waiting.
Free
“PRIVATE” Indicates a cell-phone call in progress.
"BT"
Indicates that the Bluetooth function can be used.
Indicates that battery level of cell-phone.
Full
Nearly dead
Indicates that the battery level of cell-phone cannot be
obtained.
Indicates that signal strength of cell-phone.
Maximum
Minimum
Indicates the out of coverage zone.
Indicates that the signal strength of cell-phone cannot
be obtained.
60 |
KDC-BT60U/ KDC-6047U
This Product is not installed by the manufacturer of a
vehicle on the production line, nor by the professional
importer of a vehicle into an EU Member State.
Information on Disposal of Old Electrical
and Electronic Equipment and Batteries
(applicable for EU countries that have
adopted separate waste collection systems)
roducts and batteries with the symbol
P
(crossed-out wheeled bin) cannot be
disposed as household waste.
Old electrical and electronic equipment
and batteries should be recycled at a facility
capable of handling these items and their
waste byproducts.
Contact your local authority for details in
locating a recycle facility nearest to you.
Proper recycling and waste disposal will
help conserve resources whilst preventing
detrimental effects on our health and the
environment.
Notice: The sign “Pb” below the symbol for
batteries indicates that this battery
contains lead.
The marking of products using lasers
CLASS 1
LASER PRODUCT
The label is attached to the chassis/case and says
that the component uses laser beams that have been
classified as Class 1. It means that the unit is utilizing
laser beams that are of a weaker class. There is no
danger of hazardous radiation outside the unit.
• The “AAC” logo is a trademark of Dolby Laboratories.
• The Bluetooth word mark and logos are owned by
the Bluetooth SIG, Inc. and any use of such marks
by Kenwood Corporation is under license. Other
trademarks and trade names are those of their
respective owners.
• iPod is a trademark of Apple Inc., registered in the U.S.
and other countries.
• iPhone is a trademark of Apple Inc.
• “Made for iPod” means that an electronic accessory
has been designed to connect specifically to iPod and
has been certified by the developer to meet Apple
performance standards.
• “Works with iPhone” means that an electronic
accessory has been designed to connect specifically
to iPhone and has been certified by the developer to
meet Apple performance standards.
• Apple is not responsible for the operation of this
device or its compliance with safety and regulatory
standards.
English |
61
Accessories/ Installation Procedure
Accessories
•
2
1
..........1
..........2
•
•
3*
•
3 m ..........1
*Accessory of KDC-BT60U
•
Installation Procedure
1 To prevent short circuits, remove the key from the
•
2
3
4
5
6
7
8
9
ignition and disconnect the - terminal of the
battery.
Make the proper input and output wire
connections for each unit.
Connect the wire on the wiring harness.
Take Connector B on the wiring harness and
connect it to the speaker connector in your vehicle.
Take Connector A on the wiring harness and
connect it to the external power connector on your
vehicle.
Connect the wiring harness connector to the unit.
Install the unit in your car.
Reconnect the - terminal of the battery.
Press the reset button.
¤
• Mounting and wiring this product requires skills and
experience. For safety’s sake, leave the mounting and wiring
work to professionals.
• Make sure to ground the unit to a negative 12V DC power
supply.
• Do not install the unit in a spot exposed to direct sunlight
or excessive heat or humidity. Also avoid places with too
much dust or the possibility of water splashing.
• Do not use your own screws. Use only the screws provided.
If you use the wrong screws, you could damage the unit.
• If the power is not turned ON (“Protect” is displayed), the
speaker wire may have a short-circuit or touched the
chassis of the vehicle and the protection function may
have been activated. Therefore, the speaker wire should be
checked.
• Make sure that all wire connections are securely made by
inserting jacks until they lock completely.
• If your vehicle’s ignition does not have an ACC position, or
if the ignition wire is connected to a power source with
constant voltage such as a battery wire, the power will not
be linked with the ignition (i.e., it will not turn on and off
62 |
KDC-BT60U/ KDC-6047U
•
•
along with the ignition). If you want to link the unit’s power
with the ignition, connect the ignition wire to a power
source that can be turned on and off with the ignition key.
Use a commercially available conversion connector if the
connector does not fit in the vehicle connector.
Insulate unconnected wires with vinyl tape or other similar
material. To prevent a short circuit, do not remove the caps
on the ends of the unconnected wires or the terminals.
If the console has a lid, make sure to install the unit so that
the faceplate will not hit the lid when closing and opening.
If the fuse blows, first make sure the wires aren’t touching
to cause a short circuit, then replace the old fuse with one
with the same rating.
Connect the speaker wires correctly to the terminals to
which they correspond. The unit may be damaged or fail to
work if you share the - wires or ground them to any metal
part in the car.
After the unit is installed, check whether the brake lamps,
blinkers, wipers, etc. on the car are working properly.
Mount the unit so that the mounting angle is 30° or less.
Reception may drop if there are metal objects near the
Bluetooth antenna.
Bluetooth antenna unit
About CD players/disc changers connected
to this unit
If the CD player/ disc changer has the “O-N” switch, set
it to the “N” position.
The functions you can use and the information that
can be displayed may differ depending on the models
being connected.
For Good Reception
To assure good reception, note the following:
• Communicate with the cell-phone within the lineof-sight distance of 10 m (30 ft). The communication
range becomes shorter depending on the
surrounding environment. The communication
range also becomes shorter when there is an
obstacle between this unit and the cell-phone. The
above maximum communication range (10 m) is
not always assured.
• A broadcast station or walkie-talkie located nearby
can interfere with communication due to too strong
signal.
Connecting Wires to Terminals
To USB device
USB connector (1m)
not remove the
⁄Do
cap when you do not
use the USB cable. The
connector will cause
the unit to malfunction
if it gets in touch with
any metallic part of the
vehicle.
R
Microphone input
(KDC-BT60U only)
L
Rear output
Front output
Sub Woofer output
Antenna Cord
Microphone
(Accessory 3)
R
Fuse (10A)
L
FM/AM antenna input (JASO)
AUX input (Stereo)
Use the mini-plug which is stereo type
and does not have any resistance.
To Kenwood disc changer/External optional accessory
Wiring harness
(Accessory 1)
connect these leads, refer to the relevant instruction
⁄To
manuals.
Steering remote control wire
(Light Blue/Yellow)
REMOTE CONT
STEERING WHEEL
REMOTE INPUT
Mute control wire (Brown)
MUTE
To use the steering wheel remote control feature, you
need to an exclusive remote adapter (not supplied)
matches your car is required.
Connect to the terminal that is grounded when
either the telephone rings or during conversation.
(KDC-6047U only)
To connect the Kenwood navigation system,
consult your navigation manual.
⁄
If no connections are made, do not
let the wire come out from the tab.
Power control/Motor antenna
control wire (Blue/White)
P.CONT
ANT.CONT
Connect either to the power control terminal when
using the optional power amplifier, or to the antenna
control terminal in the vehicle.
Battery wire (Yellow)
Ignition wire (Red)
⁄See next page
A–7 Pin (Red)
A–4 Pin (Yellow)
8
7
6
5
4
3
2
1
8
7
6
5
4
3
2
1
Connector A
Connector B
English |
63
Connecting Wires to Terminals
Connector Function Guide
Pin Numbers for
ISO Connectors
External Power
Connector
A-4
A-5
A-6
A-7
A-8
Cable Colour
Functions
Yellow
Blue/White
Orange/White
Red
Black
Battery
Power Control
Dimmer
Ignition (ACC)
Earth (Ground)
Connection
Speaker
Connector
B-1
B-2
B-3
B-4
B-5
B-6
B-7
B-8
Purple
Purple/Black
Gray
Gray/Black
White
White/Black
Green
Green/Black
Rear Right (+)
Rear Right (–)
Front Right (+)
Front Right (–)
Front Left (+)
Front Left (–)
Rear Left (+)
Rear Left (–)
2WARNING
Connecting the ISO Connector
The pin arrangement for the ISO connectors depends on
the type of vehicle you drive. Make sure to make the proper
connections to prevent damage to the unit.
The default connection for the wiring harness is described in
1 below. If the ISO connector pins are set as described in 2,
make the connection as illustrated.
Please be sure to reconnect the cable as shown 2 below to
install this unit to the Volkswagen vehicles etc.
1(Default setting) The A-7 pin (red) of the vehicle’s
ISO connector is linked with the ignition, and
the A-4 pin (yellow) is connected to the constant
power supply.
Ignition cable (Red)
A-7 Pin (Red)
Unit
Vehicle
Battery cable (Yellow)
A-4 Pin (Yellow)
2The A-7 pin (red) of the vehicle’s ISO connector is
connected to the constant power supply, and the
A-4 pin (yellow) is linked to the ignition.
Ignition cable
(Red)
A-7 Pin (Red)
Unit
Vehicle
Battery cable
(Yellow)
64 |
KDC-BT60U/ KDC-6047U
A-4 Pin (Yellow)
Installation/Removing the Unit
Installation
Removing the hard rubber frame
1 Engage the catch pins on the removal tool and
remove the two locks on the upper level.
Upper the frame and pull it forward as shown in
the figure.
Lock
Bend the tabs of the mounting
sleeve with a screwdriver or similar
utensil and attach it in place.
Accessory2
Removal tool
⁄
• Make sure that the unit is installed securely in place. If the
unit is unstable, it may malfunction (for example, the sound
may skip).
Catch
2 When the upper level is removed, remove the
lower two locations.
⁄
• The frame can be removed from the bottom side in the
same manner.
Removing the Unit
1 Refer to the section <Removing the hard rubber
frame> and then remove the hard rubber frame.
2 Detach the faceplate.
3 Insert the two removal tools deeply into the slots
on each side, as shown.
4 Lower the removal tool toward the bottom, and
pull out the unit halfway while pressing towards
the inside.
Accessory2
¤
¤ CAUTION
Install this unit in the console of your vehicle.
Do not touch the metal part of this unit during and
shortly after the use of the unit. Metal part such as
the heat sink and enclosure become hot.
• Be careful to avoid injury from the catch pins on the
removal tool.
5 Pull the unit all the way out with your hands, being
careful not to drop it.
English |
65
Installation/Removing the Unit
Accessory of KDC-BT60U
Installation the Microphone Unit
1 Check the installation position of the microphone
(accessory 3).
2 Remove oil and other dirt from the installation
surface.
3 Install the microphone.
4 Wire the cable up to the unit with it secured at
several positions using tape or the like.
Accessory 3
Fix a cable with a commercial
item of tape.
Peel the release coated paper of double-face adhesive tape to
fix on the place shown above.
Adjust the direction of the microphone to the driver.
⁄
• Install the microphone as far as possible from the cellphone.
66 |
KDC-BT60U/ KDC-6047U
Troubleshooting Guide
Some functions of this unit may be disabled by
some settings made on this unit.
! • Cannot set up the subwoofer.
• No output from the subwoofer.
• Cannot set up the subwoofer position of Manual
position setting.
▲ • The Dual zone function is enabled.  <Dual Zone
System> (page 39)
• In the speaker select option, None is selected for
the subwoofer.  <Speaker Setting> (page 40)
! • Cannot set up the equalizer.
• Cannot set up the Bass Boost.
• Cannot set up the Highway sound.
• Cannot set up the Supreme.
• Cannot set up the Position control.
▲ • The Dual zone function is enabled.  <Dual Zone
System> (page 39)
• The DSP function is disabled.  “DSP Set” of <Audio
Control> (page 36)
• In the speaker select option, None is selected for
the rear speakers.  <Speaker Setting> (page 40)
! • Cannot select the output destination of the
subsource in the Dual zone.
• Cannot adjust the volume of the rear speakers.
▲ The Dual zone function is disabled.  <Dual Zone
System> (page 39)
! Cannot set up Display.
▲ <Demonstration mode Setting> (page 35) is not
turned off.
! Cannot switch to USB/iPod source.
▲ The Dual zone function is set to USB/iPod.  <Dual
Zone System> (page 39)
! The number of songs contained in “SONGS”
category of this unit is different from that
contained in “SONGS” category of iPod.
▲ Podcast files are not counted in this unit as this unit
does not support the playback of podcast files.
What might seem to be a malfunction in your unit
may just be the result of slight misoperation or
miswiring. Before calling service, first check the
following table for possible problems.
General
? The operation check sound (beep sound) does not
sound.
 The preout jack is being used.
 The Touch Sensor Tone cannot be output from
the preout jack.
? The illumination flashes when the knob or button
is operated.
 This is the key illumination effect.
 You set this effect in “ILLUMI Effect” of <Display
Setting> (page 28).
? The key illumination effect brought about in
conjunction with the sound volume is small.
 The key illumination effect may be insufficient
depending on the sound volume and sound quality.
Tuner source
? Radio reception is poor.
 The car antenna is not extended.
 Pull the antenna out all the way.
Disc source
? The specified disc does not play, but another one
plays instead.
 The specified CD is quite dirty.
 Clean the CD, referring to the CD cleaning of the
section on <Handling CDs> (page 5).
 The disc is loaded in a different slot from that
specified.
 Eject the disc magazine and check the number
for the specified disc.
 The disc is severely scratched.
 Try another disc instead.
Audio file source
? The sound skips when an Audio file is being
played.
 The media is scratched or dirty.
 Clean the media, referring to the CD cleaning of
the section on <Handling CDs> (page 5).
 The recording condition is bad.
 Record the media again or use another media.
English |
67
Troubleshooting Guide
Hands-free
? The hands-free talk volume is low.
 The hands-free talk volume is set at a low level.
 The hands-free talk volume can be adjusted
independently. Adjust it during hands-free talk.
“Mic Gain” and “NR Level” <Bluetooth Setting>
(page 46).
? No sound is heard from the rear speakers.
 You are talking in the hand-free talk mode.
 No sound is heard from the rear speakers in the
hands-free talk mode.
? No beep is heard at reception of an incoming call.
 No beep is heard depending on the type of your
cell-phone.
 The “Call Beep” of <Bluetooth Setting> (page 46) is
set ON.
The messages shown below display your
systems condition.
TOC Error: ERROR 05: ERROR 99: Protect (Blink):
The speaker wire has a short-circuit or
touches the chassis of the vehicle, and then
the protection function is activated.
 Wire or insulate the speaker cable properly
and press the reset button. If the “Protect”
code does not disappear, consult your
nearest service center.
? The Bluetooth audio player cannot be registered
? The sound from the Bluetooth audio player is
discontinuous.
 The distance between this unit and audio player is
too far.
 Move the audio player nearer to this unit.
 Another Bluetooth device is affecting the Bluetooth
communication.
 Turn off another Bluetooth device.
 Move another Bluetooth device away from this
unit.
 Another Bluetooth device or profile is used for
communication.
 The downloading of the Phone book or the SMS
disconnects the sound.
68 |
KDC-BT60U/ KDC-6047U
Something is wrong with the disc magazine.
Or the unit is malfunctioning for some reason.
 Check the disc magazine. And then press
the reset button on the unit. If the “ERROR
99” code does not disappear, consult your
nearest service center.
CD-IN (Blink): The CD player section is not operating
properly.
 Reinsert the CD. If the CD cannot be
ejected or the display continues to flash
even when the CD has been properly
reinserted, please switch off the power
and consult your nearest service center.
Bluetooth audio source
(pairing).
 The PIN code is fixed.
 When a PIN code is specified in the Instruction
Manual for Bluetooth Audio Player, register it
with reference to <Registering PIN Code> (page
48) to register the Bluetooth audio player. If no PIN
code is specified in the Instruction Manual, try
“0000”.
The disc is unreadable.
ERROR 77/Mecha Error:
The unit is malfunctioning for some reason.
 Press the reset button on the unit. If the
“ERROR 77”/“Mecha Error” code does not
disappear, consult your nearest service
center.
? Voice is not recognized.
 The vehicle window is open.
 If the surrounding noise is large, voice cannot be
recognized properly. Close the vehicle windows
to reduce noise.
 Small voice.
 If voice is too small, it cannot be recognized
properly. Speak into the microphone a little more
loudly and naturally.
 The person uttering the voice tag is not the one who
registered the it.
 Only the voice of the person who registered the
voice tag can be recognized.
• No disc has been loaded in the disc
magazine.
• The CD is quite dirty. The CD is upsidedown. The CD is scratched a lot.
Unsupported File:
An Audio file is played with a format that this
unit can’t support.
Copy Protection:
A copy-protected file is played.
Read Error: The file system of the connected USB device
is broken.
 Copy the files and folders for the USB
device again. If the error message is still
displayed, initialize the USB device or use
other USB devices.
No Device:
The USB device is selected as a source
although no USB device is connected.
 Change the source to any source other
than USB. Connect an USB device, and
change the source to USB again.
N/A Device:
• An unsupported USB device is connected.
• Connection to the iPod has failed.
 Check that the connected iPod is an iPod
that is supported. See <About Audio file>
(page 56) for information on supported
iPods.
Err No Matching:
The voice tag is wrong. Voice cannot be
recognized because of an unregistered voice
tag, etc.
Too Soft: Voice is too small and cannot be recognized.
No Music Data/Error 15:
• The connected USB device contains no
playable audio file.
• Media was played that does not have data
recorded that the unit can play.
Too Loud: Voice is too large to be recognized.
Too Long: The word or utterance is too long to be
recognized.
USB ERROR:
No Message: No short message in In Box.
iPod Error:
Some trouble may have occurred to the
connected USB device.
 Remove the USB device, then cycle the
power switch to ON. If the same display is
repeated, use another USB device.
Connection to the iPod has failed.
 Remove the USB device and then
reconnect it.
 Confirm that the software for the iPod is
the latest version.
USB REMOVE (Blink):
The Remove mode has been selected for the
USB device/iPod. You can remove the USB
device/iPod safely.
No Number: • The calling party does not notify a caller ID.
• There is no phone number data.
No Data:
• There is no outgoing call list.
• There is no incoming call list.
• There is no missed call list.
• There is no phone book list.
No Entry: The cell-phone has not been registered
(pairing).
No Phonebook:Data is not contained in the phone book.
No Record: The voice tag is not registered in the phone
book.
Memory Full: The number of voice tags reaches the
maximum number to be registered in the
phone book.
Favorite: No Memory:
The procedure is not registered to Favorite
Preset Memory
No Access: The procedure preset with Favorite Control
cannot be available. The preset content may
not be recalled depending on the selected
source or mode.
No Voice: No call.
HF Disconnect: The unit cannot communicate with the cellphone.
HF Error 07: The memory cannot be accessed.
 Turn off the power and on again. If this
message still appears, press the reset
button on the control unit.
HF Error 68: The unit cannot communicate with the cellphone.
 Turn off the power and on again. If this
message still appears, press the reset
button on the control unit.
Un Known: The Bluetooth device cannot be detected.
Device Full: 5 Bluetooth device have already been
registered. No more Bluetooth device cannot
be registered.
PIN Code NG: The PIN code is wrong.
Connect NG: The unit cannot be connected to the device.
Pairing Failed: Pairing error.
English |
69
Specifications
FM tuner section
Frequency range (50 kHz space)
: 87.5 MHz – 108.0 MHz
Usable sensitivity (S/N = 26dB)
: 0.7 μV/75 Ω
Quieting Sensitivity (S/N = 46dB)
: 1.6 μV/75 Ω
Frequency response (±3.0 dB)
: 30 Hz – 15 kHz
Signal to Noise ratio (MONO)
: 65 dB
Selectivity (DIN) (±400 kHz)
: ≥ 80 dB
Stereo separation (1 kHz)
: 35 dB
MW tuner section
Frequency range (9 kHz space)
: 531 kHz – 1611 kHz
Usable sensitivity (S/N = 20dB)
: 25 µV
LW tuner section
Frequency range
: 153 kHz – 279 kHz
Usable sensitivity (S/N = 20dB)
: 45 µV
Bluetooth section (KDC-BT60U)
Version
: Bluetooth Ver.2.1+EDR Certified
Frequency range
: 2.402 – 2.480 GHz
Output Power
: +4dBm (MAX), 0dBm (AVE) Power Class 2
Maximum Communication range
: Line of sight approx.10m (32.8 ft)
Profiles
: HFP (Hands Free Profile)
: HSP (Headset Profile)
: SPP (Serial Port Profile)
: PBAP (Phone Book Access Profile)
: OPP (Object Push Profile)
: SYNC (Synchronization Profile)
: A2DP (Advanced Audio Distribution Profile)
: AVRCP (Audio/Video Remote Control Profile)
70 |
KDC-BT60U/ KDC-6047U
USB Interface
USB Standard
: USB1.1/ 2.0 (Full speed)
Maximum Supply current
: 500 mA
File System
: FAT16/ 32
MP3 decode
: Compliant with MPEG-1/2 Audio Layer-3
WMA decode
: Compliant with Windows Media Audio
AAC decode
: AAC-LC ”.m4a” files
CD player section
Laser diode
: GaAlAs
Digital filter (D/A)
: 8 Times Over Sampling
D/A Converter
: 24 Bit
Spindle speed
: 500 – 200 rpm (CLV)
Wow & Flutter
: Below Measurable Limit
Frequency response (±1 dB)
: 10 Hz – 20 kHz
Total harmonic distortion (1 kHz)
: 0.008 %
Signal to Noise ratio (1 kHz)
: 110 dB
Dynamic range
: 93 dB
MP3 decode
: Compliant with MPEG-1/2 Audio Layer-3
WMA decode
: Compliant with Windows Media Audio
AAC decode
: AAC-LC “.m4a” files
Audio section
Maximum output power
: 50 W x 4
Output power (DIN 45324, +B=14.4V)
: 30 W x 4
Speaker Impedance
: 4 – 8 Ω
Tone action
BAND1 (60 Hz): ±9 dB
BAND2 (250 Hz): ±9 dB
BAND3 (1 kHz): ±9 dB
BAND4 (4 kHz): ±9 dB
BAND5 (16 kHz): ±9 dB
Preout level / Load (CD)
: 4000 mV/10 kΩ
Preout impedance
: ≤ 600 Ω
Auxiliary input
Frequency response (±1 dB)
: 20 Hz – 20 kHz
Input Maximum Voltage
: 1200 mV
Input Impedance
: 10 kΩ
General
Operating voltage
KDC-BT60U (10.5 – 16V allowable) : 14.4 V
KDC-6047U (11 – 16V allowable) : 14.4 V
Maximum Current consumption
: 10 A
Installation Size (W x H x D)
: 182 x 53 x 158 mm
Weight
: 1.30 kg
• Specifications subject to change without notice.
English |
71
Declaration of Conformity with regard to
the EMC Directive 2004/108/EC
For KDC-BT60U:
Declaration of Conformity with regard to
the R&TTE Directive 1999/5/EC
Svenska
Härmed intygar Kenwood att denna KDC-BT60U stär l överensstämelse med de
väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av
direktiv 1999/5/EG.
Suomi
Manufacturer:
Kenwood vakuuttaa täten että KDC-BT60U tyyppinen laite on direktiivin
1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen
mukainen.
EU Representative's:
S tem Kenwood izjavlja, da je ta KDC-BT60U v skladu z osnovnimi zahtevami in
ostalimi ustreznimi predpisi Direktive 1999/5/EC.
Kenwood Corporation
2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan
Kenwood Electronics Europe BV
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands
Slovensko
Slovensky
Spoločnosť Kenwood týmto vyhlasuje, že KDC-BT60U spĺňa zákldné požiadavky
a ďalšie prislušné ustanovenia Direktĺvy 1999/5/EC.
Dansk
English
Hereby, Kenwood declares that this unit KDC-BT60U is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
Français
Par la présente Kenwood déclare que l’appareil KDC-BT60U est conforme aux
exigences essentielles et aux autres dispositions pertinentes de la directive
1999/5/CE.
Par la présente, Kenwood déclare que ce KDC-BT60U est conforme aux exigences
essentielles et aux autres dispositions de la directive 1999/5/CE qui lui sont
applicables.
Deutsch
Hiermit erklärt Kenwood, dass sich dieser KDC-BT60U in Übereinstimmung mit
den grundlegenden Anforderungen und den anderen relevanten Vorschriften der
Richtlinie 1999/5/EG befindet. (BMWi)
Hiermit erklärt Kenwood die Übereinstimmung des Gerätes KDC-BT60U mit den
grundlegenden Anforderungen und den anderen relevanten Festlegungen der
Richitlinie 1999/5/EG. (Wien)
Nederlands
Hierbij verklaart Kenwood dat het toestel KDC-BT60U in overeenstemming is
met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/
EG.
Bij deze verklaat Kenwood dat deze KDC-BT60U voldoet aan de essentiële eisen
en aan de overige relevante bepalingen van Richtlijn 1999/5/EC.
Italiano
Con la presente Kenwood dichiara che questo KDC-BT60U è conforme ai requisiti
essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Undertegnede Kenwood erklærer harved, at følgende udstyr KDC-BT60U
overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Ελληνικά
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Kenwood ΔΗΛΩΝΕΙ ΟΤΙ KDC-BT60U ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ
ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ
1999/5/EK.
Eesti
Sellega kinnitab Kenwood, et see KDC-BT60U vastab direktiivi 1999/5/EC
põhilistele nõudmistele ja muudele asjakohastele määrustele.
Latviešu
Ar šo, Kenwood, apstiprina, ka KDC-BT60U atbilst Direktīvas 1999/5/EK
galvenajām prasībām un citiem tās nosacījumiem.
Lietuviškai
Šiuo, Kenwood, pareiškia, kad šis KDC-BT60U atitinka pagrindinius Direktyvos
1999/5/EB reikalavimus ir kitas svarbias nuostatas.
Malti
Hawnhekk, Kenwood, jiddikjara li dan KDC-BT60U jikkonforma mal-ħtiġijiet
essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/
EC.
Українська
Компанія Kenwood заявляє, що цей виріб KDC-BT60U відповідає ключовим
вимогам та іншим пов’язаним положенням Директиви 1999/5/EC.
Turkish
Kenwood, işbu belge ile KDC-BT60U numaralı bu ünitenin 1999/5/EC
Direktifi’nin özel gereksinimlerine ve ilgili diğer hükümlerine uygun olduğunu
beyan eder.
Español
Por medio de la presente Kenwood declara que el KDC-BT60U cumple con los
requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de
la Directiva 1999/5/CE.
Português
Kenwood declara que este KDC-BT60U está conforme com os requisitos
essenciais e outras disposições da Directiva 1999/5/CE.
Polska
Kenwood niniejszym oświadcza, że KDC-BT60U spełnia zasadnicze wymogi oraz
inne istotne postanowienia dyrektywy 1999/5/EC.
Český
Kenwood timto prohlasuje, ze KDC-BT60U je ve shode se zakladnimi pozadavky
a s dalsimi prislusnymi ustanoveni Narizeni vlady c. 426/2000 Sb.
Magyar
Alulírott, Kenwood, kijelenti, hogy a jelen KDC-BT60U megfelel az 1999/5/
EC irányelvben meghatározott alapvető követelményeknek és egyéb vonatkozó
előírásoknak.
For Turkey
Bu ürün 26891sayılı Resmi Gazete’de yayımlanan
Elektrikli ve Elektronik Eşyalarda Bazı Zararlı Maddelerin
Kullanımının Sınırlandırılmasına Dair Yönetmeliğe
uygun olarak üretilmiştir.
This product complies with Directive, Number 26891
regarding “REGULATION ON THE RESTRICTION OF
THE USE OF CERTAIN HAZARDOUS SUBSTANCES IN
ELECTRICAL AND ELECTRONIC EQUIPMENT”.
This symbol mark indicates that
Kenwood manufactured this product
so as to decrease harmful influence on
the environment.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising