STC-SBS241POE 【Mono】 STC-SCS241POE

STC-SBS241POE 【Mono】 STC-SCS241POE
2.3MP CMOS GigE Vision
45fps Global Shutter
NEW
Sentech GigE Vision Camera
STC-SBS241POE【Mono】
STC-SCS241POE【Color】
Sentech is excited to present the brand new STC-SCS241U3V Sony CMOS Sensor camera.
The STC-SCS241U3V features a 1/1.2” Sony CMOS Sensor, 2.3 Megapixel Resolution, 45 FPS, and
a multitude of other functions. If high quality at a great price is what you need, look no further!
Features
●
1920 (H) x 1200 (V)
●
Global Shutter
●
5.86μm x 5.86μm
●
C Mount
●
1/1.2 CMOS Sensor
●
PoE / 6 Pin Connector
●
45 FPS
●
35 x 35 x 53.4 mm (excluding connector)
www.sentechamerica.com
Specifications
Spectral Sensivity
Model Numbers
: STC-SCS241POE (Color)
Image Sensor :
: 1/1.2” 2.3M Color CMOS (Sony: IMX174)
Shutter Type
: Global Shutter
Active Picture
: 1920 (H) x 1200 (V)
STC-SBS241POE (Monochrome)
1/1.2” 2.3M Mono CMOS (Sony: IMX174)
Elements
Cell Size
: 5.86 (H) x 5.86 (V) µm
Scanning Mode
: Full Scanning (Full Resolution) / ROI
Frame Rate
: 45 fps
Sync System
: Internal
Video Output: :
: 8 / 10 / 12 bit RAW, BayerGR 8 / 10 / 12, BayerGR10 / 12Packed,
Noise Level
:
- @ 8bit output
: ≤ 1.3 Digital (Gain 0 db)
- @ 10bit output
: ≤ 5.5 Digital (Gain 0 db)
RGB8Packed (Default: 8bit)
Dimensions
- @ 12bit output
: ≤ 22 Digital (Gain 0 db)
ALC
: Auto Shutter / Auto Gain / Manual
Electronic Shutter:
: 30 useconds to 16,777,215 useconds
(Default: Auto Shutter: OFF, AGC: OFF)
Gain
- Analog
: 0 ~ 24 dB (Default: 0 dB)
- Digital:
: 0 ~ 6 dB (Default: 0 dB)
ROI:
: Horizontal: 16 to 1920 pixels / Vertical: 2 to 1200 pixels
Adjustable steps for the image size: 8 pixels horizontal and 2
lines vertical, Adjustable steps for offset: 8 pixels horizontal / 2
lines vertical.
Gamma
: Gamma 1.0 or uploadable gamma table (Default 1.0)
Binning Function
: Not Supported
Decimation Function: Individual x 2 Horizontal , Vertical decimation
Mirror Image
: Horizontal / Vertical / Horizontal & Vertical / Off (Default: Off)
ROI Function
: Variable ROI settings through the communication
White Balance
: Auto / Manual / Push-to-Set (Default: Manual) (Color only)
Operating Mode
: Free-run / Edge Preset Trigger / Pulse Width Trigger
Communication
: UART communication through the Ethernet Port
Interface
: IEEE802.3af CLASS2 (1000BASE-T)
Protocol
: GigE Vision 1.2® and Genicam™ Standard Version 2.1 (SFNC 1.4)
Input / Output
: One opt-isolated input and two open collector outputs
(Default: Free Run)
Power
- Input Voltage
: + 10.8 to 26.4 Vdc
- Consumption
: TBD (+12V: 3.0W, +24V: 3.6W, PoE: 3.0W)
Dimensions
: 35 (W) x 35 (H) x 53.4 (D) mm
(Excluding connectors) (Color)
35 (W) x 35 (H) x 53.7 (D) mm (Excluding connectors) (Mono)
Optical Filter
: IR Cut Filter (Color only)
Lens Mount
: C Mount
Connectors
: RJ45 Connector
Weight
: Approx. 100g
Power-I/O Connector: HR10A-&r-6PB (Hirose) or equivalent
Stand. Compliancy : EMS: EN61000-6-2, EMI: EN55011, RoHS Compliant
※Specifications are subject to change without notice.
1345 Valwood Pkwy, Suite 320 Carrollton, TX 75006
TEL:972-481-9223 www.sentechamerica.com
E-mail:sales@sentechamerica.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising