USER GUIDE
UMS Multi Client User Guide
USER GUIDE
UMS Multi Client
(Multi Sites Monitoring Software)
Version: 1.0
This document contains preliminary information and subject to change without notice.
CMS User Guide
TABLE OF CONTENTS
UMS MULTI CLIENT (MULTI SITES MONITORING SOFTWARE) .................................... 3
1. Overview ........................................................................................................................................................ 3
2. Minimum PC requirements .......................................................................................................................... 3
3. Installing the program .................................................................................................................................. 3
4. Live Window .................................................................................................................................................. 5
4-1. Main user interface .................................................................................................................................. 5
4-2. Control buttons......................................................................................................................................... 5
5. Search and Playback Window..................................................................................................................... 7
5-1. Main user interface .................................................................................................................................. 7
5-2. Main control panel.................................................................................................................................... 7
6. Setup of UMS Multi Client .......................................................................................................................... 10
6-1. General .................................................................................................................................................. 10
6-2. Event ...................................................................................................................................................... 11
6-3. Record ................................................................................................................................................... 12
6-3. OSD ....................................................................................................................................................... 13
6-4. About ...................................................................................................................................................... 14
7. Operation ..................................................................................................................................................... 15
7-1. Addition, Delete, and modify of DVR sites ............................................................................................. 15
7-2. Connect and Disconnect........................................................................................................................ 18
7-2. Still-image capture during Live............................................................................................................... 20
7-3. Recording video on local PC during Live............................................................................................... 21
7-4. Local Playback and Remote Playback .................................................................................................. 22
7-5. AVI Backup during playback .................................................................................................................. 24
APPENDIX: HOW TO SET NETWORK ............................................................................ 26
2
UMS Multi SW User Guide
UMS Multi Client (Multi Sites Monitoring Software)
1. Overview
The UMS Multi-Client is a multiple site monitoring client software with; video, audio, and alarm signals from
the DVRs over networks. The UMS Multi-Client does not limit the number of DVR units to register.
The program displays to up 256 live videos on one display and even playback videos window on the same or
another display monitor.
On the program, user may control PTZF cameras on the DVRs. By attaching a microphone and speaker
system to devices on site, user may make bi-directional audio communication over the network.
2. Minimum PC requirements
CPU
Intel Pentium Ⅳ
2Ghz
Memory
512MB or Higher is recommended.
VGA
64MB or Higher is recommended.
Resolution
1024x768
Disk space
10MB
OS
Windows 2000, XP Professional, XP Home, Vista (Some versions of Vista has
problem in installation. Please contact your vendor for more information.)
Network
10/100Base T
Others
Direct X 8.1 or Higher
Before installing the program, check the PC specifications. The DVR remote software may not perform
correctly if the PC does not meet the minimum requirements.
3. Installing the program
1. Insert the provided CD in the CD drive and double-click “UMSMultiClient (XXXX).exe”
3
CMS User Guide
2. Select a destination folder and click “Next”.
3. Select the program folder and click “Next”.
4. The setup status screen is displayed.
5. After the installation is completed, “UMS Multi Client” icon displays on the desktop screen.
4
UMS Multi SW User Guide
4. Live Window
When installation is completed, double click the “UMS Multi Client” icon on your desktop to start the
program.
4-1. Main user interface
4-2. Control buttons
Button
Description
Click this icon to run a playback window to search and play videos
LOCAL PLAYBACK
that are recorded in local PC.
Click this icon to run a playback window to search and play videos
REMOTE PLAYBACK
that are recorded in remote DVR.
THUMBNAIL REFRESH: Click this icon to refresh and renew
thumbnail image of every connected site.
SITE ADDITION: Click this icon to open ‘Site Addition’ window.
SITE DELETE: Click this icon to delete site from the index
window, after disconnect a site.
SITE MODIFY: Select the site from the index window and click
SITE MANAGEMENT
this icon to open ‘Site Modify’ window.
5
CMS User Guide
Click this icon to connect the selected site/sites.
CONNECT
Click this icon to disconnect the selected site/sites.
DISCONNECT
SETUP
CAPTURE
Click this icon to setup configuration of UMS MULTI CLIENT.
Click this icon to capture a still image
EVENT LIST
PAUSE
Click this icon to play/pause live video.
ALARM ON
Enable or disable recording of live video to local disk which has set in
RECORD ON
AUDIO
MIC
setup menu.
Use the volume control bar to set the audio level.
Use the micro phone volume control bar to set the micro phone level.
User can control PAN/TILT & ZOON/FOCUS.
PAN left /right
ZOOM in/out
TILT up/down
FOCUS in/out
To select the numbers of display channel/channels (Single, quad, 9
CHANNEL SPLIT
channels, and 16 channels) of highlighted site.
To select the numbers of DVR/DVRs (1 DVR, 4 DVRs, 9 DVRs, 16
DVR SITE SPLIT
DVRs) on main display screen.
6
UMS Multi SW User Guide
5. Search and Playback Window
5-1. Main user interface
You can access to search window by clicking the search icon (Local Playback / Remote Playback) on the
upper left of Live Window.
5-2. Main control panel
Button
Description
Click this icon to run a playback window to search and play videos
LOCAL PLAYBACK
that are recorded in local PC.
Click this icon to run a playback window to search and play videos
REMOTE PLAYBACK
that are recorded in remote DVR.
7
CMS User Guide
Directory window shows site/sites that are pre-registered.
Click this icon to connect the selected site/sites.
CONNECT
Click this icon to disconnect the selected site/sites.
DISCONNECT
SETUP
CAPTURE
Click this icon to setup configuration of UMS MULTI CLIENT.
Click this icon to capture a still image.
EVENT LIST
Click this icon to set the beginning time for backup of the recorded
MARK IN
video in AVI format.
Click this icon to set the ending time for backup of the recorded video
MARK OUT
in AVI format.
Click this icon to backup the recorded video in AVI format.
BACKUP
AUDIO
Use the volume control bar to set the audio level.
To select the numbers of DVR/DVRs (1 DVR, 4 DVRs, 9 DVRs, 16
DVR SITE SPLIT
DVRs) on main display screen.
To select the numbers of display channel/channels (Single, quad, 9
CHANNEL SPLIT
channels, and 16 channels) of highlighted site.
8
UMS Multi SW User Guide
To select the channel to playback.
The calendar shows dates with recorded video in color.
To display the recorded data of selected channel or all channels on a
time line scale.
To change a time line scale from 24 hours to 60 minutes or vise
versa.
The timeline shows recorded data in color on the bar. You can adjust
the time line scale and move it to the time you wish to playback. Then
click the play icon to display the recorded video.
Playback buttons.
9
CMS User Guide
6. Setup of UMS Multi Client
Click the setup icon
to setup the configuration of UMS Multi Client software. The Setup window
displays.
6-1. General
6-1-1. Security Option: Set a password for security options.
Select security options and set a password.
Then when you access any of selected functions, you need to enter the password.
You can also set the save path for capturing and backup.
6-1-2. Save Path: Specify the location to save captured still image for Capture and Backup data.
6-1-3. Miscellaneous
Automatic reconnection: If a user selects this function, client S/W will automatically try to connect the finally
connected IP address, after the network is disconnected.
Always On Top:
Time Format: Change the way the Client software displays the time.
10
UMS Multi SW User Guide
6-2. Event
Event log can be archived and searched.
6-2-1. Archiving Event Log: Specify the location to save event logs and select event to archive.
6-2-2. Archiving Event Log: Event log can be searched from selected time.
11
CMS User Guide
6-3. Record
6-3-1. Record setup: You can set the recording conditions for Always, Event, or Auto record. And you can
also select target DVR/DVRs and channel/channels.
When you set the recording condition to event, you can set event for motion or alarm with duration.
12
UMS Multi SW User Guide
6-3-2. Record local storage setup: You can select the local disk to use and the amount of disk space you
want to allow the program to use for recording. You can also select the option to overwrite data or stop
recording when the maximum amount of disk space is full.
6-3. OSD
You can select the OSD to be display
13
CMS User Guide
6-4. About
“About” provides network client version information.
14
UMS Multi SW User Guide
7. Operation
7-1. Addition, Delete, and modify of DVR sites
7-1-1. Addition of sites
1. Click
SITE ADDITION button. And then the following window displays.
o
Site Name: Input a name that properly describes a site.
o
IP Address: Input IP address
(Public IP address of a router that DVR is connected.) or Domain
name that is registered at www.ddnscenter.com
o
Port No.: Input port number of DVR.
o
Password: Input network password of DVR.
o
Channels: Select the channels number of DVR.
2. Click OK button. And then the registered site is added on the directory window.
15
CMS User Guide
7-1-2. Delete of sites
1. Select the site/sites to delete from the directory window.
2. Click
SITE DELETE button. And then the selected site/sites is/are deleted.
7-1-3. Modify of sites
1. Select the site/sites to modify from the directory window.
2. Click
SITE MODIFY button. And then the following window displays.
16
UMS Multi SW User Guide
3. Click OK button. And then the modified information is applied.
17
CMS User Guide
7-2. Connect and Disconnect
7-2-1. Connect
1. Select site/sites to connect from the directory window.
2. Click
CONNECT button, and then site/sites displays/display as connected.
18
UMS Multi SW User Guide
7-2-2. Disconnect
1. Select site/sites to disconnect from the directory window.
2. Click
DISCONNECT button, and then selected site/sites disconnected.
19
CMS User Guide
7-2. Still-image capture during Live
1. Double-click a channel to capture from the display screen. (Otherwise all channels will be captured.).
2. Click
CAPTURE button. And then a Capture window displays.
3. Set Save path, File Name, and File Format. And then click OK button.
4. Still image is saved as set in Capture window.
20
UMS Multi SW User Guide
7-3. Recording video on local PC during Live
1. Click
SETUP button. And then a setup window display.
2. Select Record and set the values.
3. Select Disk and set the values.
4. Click
RECORD ON button. And the color of button is changed.
5. Live video data is recorded as set in Record and Disk setup. These video data can be searched and playbacked with Local Playback.
21
CMS User Guide
7-4. Local Playback and Remote Playback
7-4-1. Playback of recorded video on local PC
1. Click
LOCAL PLAYBACK button. And then Playback Window display over Live Window.
2. Select site/sites to connect from the directory window.
3. Click
CONNECT button. And then Green bar displays on Search calendar and slide window.
4. Move scroll bar on where there is video data and Play button.
5. Video data that is recorded on local PC will be play-backed.
22
UMS Multi SW User Guide
7-4-2. Playback of recorded video on remote DVR
1. Click
REMOTE PLAYBACK button. And then Playback Window display over Live Window.
2. Select site to connect from the directory window.
3. Click
CONNECT button. And then Green bar displays on Search calendar and slide window.
4. Move scroll bar on where there is video data and Play button.
5. Video data that is recorded on a remote DVR is play-backed.
23
CMS User Guide
7-5. AVI Backup during playback
You can backup the recorded videos in AVI format during playback.
Notice for remote backup
User must open 1 additional TCP port for remote backup as AVI format. If this port is not open
properly, the remote backup function does not work. (Example: When NETWORK/PORT is set as
5445, 5446 TCP port of IP address of DVR must be open.)
1. Double-click the target channel to backup.
2. Select the beginning time by using the search calendar and slide bar.
3. Click
MARK IN button, when the scale of the timeline is located on the target time as the
beginning time of backup.
4. Set the ending time on the blue timeline by dragging the scale on the target time as the ending time of
backup and clicking
MARK OUT button. Then, color of the timeline between the beginning time and
ending time will be changed into dark Green.
5. Click
BACKUP. And then the window appears as below.
24
UMS Multi SW User Guide
6. You can also set the beginning time and ending time on this window. After selecting a channel for backup,
click the OK button. The backup will begin.
5. AVI video data is recorded as set in AVI Backup window. AVI format video can be played back by Window
Media Player™ or other media player that is compatible with AVI format video.
Notice
When PC doesn’t have proper H.264 CODEC, the media players can not playback the AVI format video.
Then install CODEC that is provided on the CD.
25
CMS User Guide
APPENDIX: How to set network
How to set IP address of the DVR and open TCP port of the router?
The port forwarding is dependent on the brand and model of the router. The port forwarding is required to
allow access to the DVR beyond a router.
1.
Connect network cable between DVR and Router or ADSL modem.
ADSL Modem
Internet
IP Router or HUB
2.
3.
Default network setting on DVR are
-
Port: 5445
-
WEB Port : 80
-
Network : DHCP
From PC connected in the same Router, find IP address, Gateway, and Subnet mask by IPCONFIG
command in command prompt.
4.
But if IP is something else like 192.168.x.xxx., you should change IP address, Subnet, Gateway on
the DVR. Go to SETUP>NETWORK>LAN of the DVR and change the IP settings to be like IP:
192.168.XXX.XXX and Gateway: 192.168.XXX.XXX. (Refer to the user’s manual of Router.)
26
UMS Multi SW User Guide
5.
Open the web browser. Enter the router IP address in the address bar (The router IP address are
different with the brand and model.), click GO.
6.
Enter the user name and password (admin is default) and press the OK button.
7.
Select the Port Range Forwarding tab.
8.
Enter the each field.
i.
Application: Enter a description of the DVR (Example: store1)
ii.
Start: Enter the first number of the port you need to port forward (Example: 5445)
iii.
End: Enter the last number of the port you need to port forward (Example: 5445)
iv.
Protocol: Select Both.
v.
IP address: Enter the IP address of the DVR on SETUP>NETWORK>LAN>IP ADDRESS.
vi.
Enable: Check the enable box.
27
CMS User Guide
9.
Select the Save settings button located on the bottom of the window. Then Port forwarding is finished.
Network access beyond Router
In order to access beyond Router (Firewall), user must open 1 TCP port that is set on NETWORK
> PORT for Command, Live steaming, and Search streaming. If this port is not open properly, user
can not access DVR beyond a router. (Example: When NETWORK/PORT is set as 5445, 5445
TCP port of IP address of DVR must be open.)
Notice for remote backup
User must open 1 additional TCP port for remote backup as AVI format. If this port is not open
properly, the remote backup function does not work. (Example: When NETWORK/PORT is set as
5445, 5446 TCP port of IP address of DVR must be open.)
You can learn how to port forward many kinds of Routers from the bellow site.
http://www.portforward.com/english/routers/port_forwarding/routerindex.htm
28
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising