ADS-HCX000A-EN_20151022
PRODUCT guide
iDatastart HC
Document number
Revision Date
20151022
NOTICE
The manufacturer will accept no responsability for any electrical damage resulting from
improper installation of this product, be that either damage to the vehicle itself or to the
installed device. This device must be installed by a certified technician. Please review the
Installation Guide carefully before beginning any work.
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2015
www.idatalink.com
Page 2 of 13
• 20151022
GETTING STARTED
WeLcome
Congratulations on the purchase of your iDataStart
HC solution. You are now a few simple steps away
from enjoying your new remote starter unit with
enhanced features.
Before starting your installation, please ensure that
your iDataStart HC module is programmed with the
correct firmware for your vehicle and that you carefully review the install guide.
neeD HeLP?
tabLe oF contents
Box Contents
3
Module Pinout
4
Tach Programming Procedure
5
Remote Programming Procedure
6
Valet Mode Programming Procedure
7
Compatible Accessories
9
Online Module Settings
10
Module Diagnostics
11
Remote Starter Error Codes
12
Module Reset Procedure
13
1 866 427-2999
support@idatalink.com
idatalink.com/support
www.12voltdata.com/forum
www.facebook.com/groups/idatatech
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2015
iDatastart HC
www.idatalink.com
Page 3 of 13
• 20151022
BOX CONTENTS - 1 OF 1
BOX CONTENTS
HC MODULE
HC2 - HC2352AC
2-WAY REMOTE - TR2350AC
M1 - 8 PIN BLACK
AUTOMATIC
TRANSMISSION
CUT LOOP
M2 - 12 PIN BLACK
M5 - 6 PIN BLUE
M3 - 10 PIN WHITE
HC2 - HC2351AC
M4 - 20 PIN BLACK
TELEMATIC 1 - 4 PIN BLUE
1-WAY REMOTE - TR1150A
NC - 3 PIN BLACK
TELEMATIC 2 - 4 PIN RED
PROGRAMMING BUTTON
NC - 4 PIN RED
LED 1
LED 2
RF PORT/WEBLINK PORT - 4 PIN BLACK
ANTENNA - AN2300A
USB
HC1 - HC1151AC
ANTENNA
CABLE
HOOD SWITCH M5
ANTENNA LED
M4
M3
M2
M1
ANTENNA BUTTON
HCF - HCF900A
RF PORT - 4 PIN BLACK
RF DECODER - FT-D100
RF DECODER
CABLE
2 PIN BLACK
RF PORT - 4 PIN BLACK
HCX - HCX000A
STICKERS
6 PIN WHITE OR BLUE
ANTENNA RF PORT - 4 PIN WHITE
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2015
iDatastart HC
www.idatalink.com
Page 4 of 13
• 20151022
MODULE PINOUT - 1 OF 1
HC MODULE
2 1
4 3
6 5
8 7
2
4
6
8
10
12
M1
1
3
5
7
9
11
M2 01 GREEN•BLACK DOT - LOCK (-) OUTPUT
02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT
03 RED/WHITE•BLACK DOT - TRUNK RELEASE (-) OUTPUT
04 GREEN/WHITE•BLACK DOT - ARM (-) OUTPUT
05 GREEN/BLACK•BLACK DOT - DISARM (-) OUTPUT
06 BLUE/WHITE•BLACK DOT - GWR (-) OUTPUT
07 EMPTY
08 WHITE/PURPLE•BLACK DOT - POC 1 - 2ND UNLOCK OTHER DOORS (-) OUTPUT
09 PURPLE/BLACK•BLACK DOT - POC 2 - RAP SHUTDOWN (-) OUTPUT
10 WHITE/BLACK•BLACK DOT - POC 3 - HORN (-) OUTPUT
11 BROWN/BLACK•BLACK DOT - POC 4 - STARTER KILL (-) OUTPUT
12 WHITE•BLACK DOT - PARKING LIGHTS (-) OUTPUT
1
3
5
7
9
M3 01 BROWN•SILVER DOT - BRAKE (+) INPUT
02 BLACK/WHITE•SILVER DOT - E-BRAKE (-) INPUT
03 PURPLE•SILVER DOT - DOOR (+) INPUT
04 GREEN•SILVER DOT - DOOR (-) INPUT
05 PURPLE/WHITE•SILVER DOT - TACH (-) INPUT
06 WHITE/BLUE•SILVER DOT - X-TRIGGER (-) INPUT
07 GRAY•SILVER DOT - HOOD (-) INPUT
08 BLUE•SILVER DOT - TRUNK (-) INPUT
09 GRAY/BLACK•SILVER DOT - GLOW PLUG (+) INPUT
10 EMPTY
AUTOMATIC
TRANSMISSION
CUT LOOP
M2
M3
2
4
6
8
10
M5
M1 01 ORANGE - ACCESSORY (+)
02 RED - POWER (30A)
03 PURPLE - STARTER (+)
04 PINK/WHITE - PROG. RELAY #4 - IGNITION 2 (+) (DEFAULT)
05 PINK - IGNITION (+)
06 WHITE - PROG. RELAY #5 (10A) - PARKING LIGHTS (+) (DEFAULT)
07 RED - POWER (30A)
08 BLACK - GROUND
M4
M4
2
4
6
8
10
12
14
16
18
20
1
3
5
7
9
11
13
15
17
19
FUNCTIONS DEFINED BY FIRMWARE
M5
1
3
5
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2015
iDatastart HC
2
4
6
FUNCTIONS DEFINED BY FIRMWARE
www.idatalink.com
TACH PROGRAMMING PROCEDURE - 1 OF 1
01
Page 5 of 13
• 20151022
START vehicle for 15 seconds.
OFF
ACC
ON START
ENGINE
START
STOP
02
Press and hold the brake pedal.
03
Press and release the module’s programming
button. (OR if the remotes are already
programmed to the vehicle, press and hold the
start button of the remote for 2.5 seconds.)
04
Wait, LED 2 will flash GREEN. (See the Module
Diagnostics page)
05
Release the brake pedal.
06
Module Programming Procedure completed.
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2015
iDatastart HC
www.idatalink.com
REMOTE PROGRAMMING PROCEDURE - 1 OF 1
01
02
[4x]
OFF
ACC
WARNING: Complete the module
programming procedure and tach
programming procedure before programming
the remotes. A maximum of four [4x] remotes
per system.
07
Set ignition to ON position.
08
ON START
ENGINE
START
STOP
03
Page 6 of 13
• 20151022
Release the antenna button. The antenna’s
leds will turn OFF.
Set ignition to OFF position.
OFF
ACC
ON START
ENGINE
START
STOP
Press and release the antenna button, then
press and hold the antenna button. The
antenna’s leds will turn solid BLUE.
09
Remote Programming Procedure completed.
_________________________________
04
Parking Light will flash once [1x].
>>
F
To program an additional remote as second
vehicle mode: Follow steps 1 to 4. Press twice
[2x] on the “F” button then press once [1x] on
the LOCK button of the remote. Follow steps
6 to 9.
_________________________________
05
Press once [1x] on the LOCK button of each
remote.
06
The antenna’s leds will flash BLUE once [1x]
for each successful pairing.
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2015
iDatastart HC
www.idatalink.com
VALET MODE PROGRAMMING PROCEDURE - 1 OF 1
>>
NOTE: In Valet Mode, the Remote starter is not
functional. Keyless entry, Lock and Unlock will
remain functional. See RF kit user manual for
alternate valet mode programming.
06
Valet Mode Programming Procedure
completed.
01
Time restriction. Complete next step within 7
seconds.
>>
To exit valet mode: repeat steps 1 to 5.
02
Page 7 of 13
• 20151022
Cycle ignition ON twice [2x OFF/ON] rapidly.
OFF
ACC
ON START
ENGINE
START
STOP
03
Press and release the BRAKE pedal three
times [3x].
04
Parking Light will flash once [1x] then will
flash twice [2x].
05
Set ignition to OFF position.
OFF
ACC
ON START
ENGINE
START
STOP
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2015
iDatastart HC
www.idatalink.com
Page 8 of 13
• 20151022
COMPATIBLE ACCESSORIES - 1 OF 2
WEBLINK CABLE (required accessory sold separately)
WEBLINK CABLE
MODULE
WEBLINK PORT
COMPUTER
USB PORT
4 PIN BLACK CABLE
WEBLINK MOBILE (accessory sold separately)
OBDII CONNECTOR
MODULE
WEBLINK PORT
4 PIN BLACK CABLE
MOBILE DEVICE
PORT
1
2
3
4
5
6
7
8
OBDII CONNECTOR
9
10
11
12
13
14
15
16
TELEMATIC KIT (accessory sold separately)
MODULE
TELEMATIC BLUE PORT
(NC)
*For SmartStart, use the module’s RED Telematic port.
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2015
iDatastart HC
www.idatalink.com
Page 9 of 13
• 20151022
COMPATIBLE ACCESSORIES - 2 OF 2
RF DECODER (included with the HCF)
RF KIT (sold separately)
RF DECODER - FT-D100
RF KIT
(NC) RED
(NC) BLACK
MODULE
RF PORT
BLACK
BLUE CABLE
FLASH THE DECODER
BEFORE THE INSTALLATION
BLUE
or
WHITE
DECODER
BLACK CABLE
ANTENNA
RF KIT (included with the HC1 & HC2)
MODULE
RF PORT
4 PIN BLACK CABLE
ANTENNA
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2015
iDatastart HC
www.idatalink.com
oNLINe MoDULe SeTTINgS - 1 OF 1
WeB PRogRaMMaBLe MeNUS
DeSCRIPTIoN
MENU 1 – Remote Starter
RS related configuration options
MENU 2 – Doorlock Options
Convenience feature configuration options
MENU 3 – Security Options
Alarm activation and settings
MENU 4 – AUX function assignments
Set transmitter AUX buttons controls
MENU 5 – Programmable outputs (POC)
Set actions for programmable outputs
MENU 6 – Pulse Timer Output Configuration (PTO)
Set duration for pulse timer outputs (if used)
MENU 7 – Input Configurations
Set inputs for Auto by firmware/Data/Analog
MENU 8 – Output Configurations
Programming options are avaible through Weblink and Weblink Mobile only.
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2015
Page 10 of 13
• 20151022
Set outputs for Auto by firmware/Data/Analog
iDatastart HC
www.idatalink.com
I
II
III
IV
DURING MODULE PROGRAMMING
DURING TACH PROGRAMMING
DURING REMOTE START
WITH IGNITION OFF
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2015
DIagNoSTIC
TeST MoDULe
LeD 1 STaTUS
MoDULe DIagNoSTICS - 1 OF 1
Flashing RED
Missing/wrong information from firmware or vehicle.
Solid RED
Module waiting for more vehicle information.
Flashing GREEN
Additional steps required to complete module programming.
Solid GREEN then OFF
Module correctly programmed.
OFF
No activity or module already programmed.
1 GREEN flash
Tach signal programmed in Analog
2 GREEN flashes
Tach signal programmed in Data
3 RED flashes
No tach signal detected
4 RED flashes
System is in valet mode
5 RED flashes
Tach set for ‘VTS’. No tach programming required
6 RED flashes
Tach set for ‘assumed start’. No tach programming required
Flashing RED
Module incorrectly programmed.
Solid RED
Module incorrectly programmed.
Flashing GREEN
Module correctly programmed and operational.
Solid GREEN then OFF
Reset in progress.
OFF
Invalid ground when running status from remote starter.
Flashing RED
Module incorrectly programmed or connected.
Solid RED
Module not programmed. Waiting for more vehicle information.
Flashing GREEN
False ground when running status from remote starter.
Solid GREEN then OFF
Reset in progress.
OFF
Module at rest and ready for a remote start sequence.
iDatastart HC
Page 11 of 13
• 20151022
www.idatalink.com
[X] NUMBeR of
PaRKINg LIgHT
fLaSHeS
DIagNoSTIC
ReMoTe STaRTeR eRRoR CoDeS - 1 OF 1
I WARNING: The following applies only when the parking
lights are connected and supported by the system.
01
Engine running.
02
Key in ignition at ON position.
II After a remote starter failure, the parking lights will flash
three [3x] times, then will flash [X] number times to
indicate an error code. See table.
03
Door is open.
04
Trunk is open.
05
Foot brake is ON.
06
Hood is open.
07
The reservation is OFF. (Manual transmission only)
08
Tach failure.
09
The vehicle is moving (VSS).
10
System is in Valet Mode.
11
CAN communication failure
12
RS not synchronized. Start vehicle with OEM key for 15 sec before trying a new RS sequence.
13
Bypass problem.
[Y] NUMBeR of
PaRKINg LIgHT
fLaSHeS
DIagNoSTIC
ReMoTe STaRTeR eRRoR CoDeS:
NoTeS
I WARNING: The following applies only when the parking
lights are connected and supported by the system.
01
Engine tach signal is lost.
02
Emergency brake is lost.
II If the engine shuts down after a remote starter sequence:
Press and hold the Trunk button and the Start button at the
same time for 2.5 seconds when using a 1-WAY remote.
OR
Press once [1x] on button “4” when using a 2-WAY remote.
03
Foot brake is ON.
04
Hood is open.
05
Engine RPM limiter is ON.
06
Glow plug timeout error.
07
Vehicle is moving (VSS).
08
N/A
09
N/A
10
Door is open.
11
CAN communication failure during RS sequence.
12
RS not synchronized. Start vehicle with OEM key for 15 sec before trying a new RS sequence.
13
Takeover is not allowed.
14
Shutdown error, board overheat protection.
ReMoTe STaRTeR SHUTDoWN eRRoR CoDeS:
NoTeS
The parking lights will flash four [4x] times, then will flash
[Y] number times to indicate an error code. See table.
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2015
iDatastart HC
Page 12 of 13
• 20151022
www.idatalink.com
MODULE RESET PROCEDURE - 1 OF 1
>>
The following procedure resets the module
programming to the vehicle. It does not reset
any settings configured online.
06
Module RESET completed.
01
Disconnect all connectors from module except
the M1 BLACK 8-pin connector and the M4
BLACK 20-pin connector.
07
Reconnect all connectors.
02
Disconnect the M1 BLACK 8-pin connector
and the M4 BLACK 20-pin connector.
08
Repeat programming procedure.
03
PRESS AND HOLD the module’s programming
button while connecting the M1 BLACK
8-pin connector and the M4 BLACK 20-pin
connector.
>>
Failure to follow procedure may result with a
DTC or a CHECK ENGINE error message.
04
Wait, LED 1 will flash RED. RELEASE
programming button.
05
LED 1 will turn RED for 2 seconds.
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2015
iDatastart HC
Page 13 of 13
• 20151022
www.idatalink.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising