KUBOTA MINI EXCAVATOR - Chase Plant Hire Ltd

KUBOTA MINI EXCAVATOR - Chase Plant Hire Ltd
KUBOTA MINI EXCAVATOR
S U P ERI OR
P E R FORM ANC E/
DE L U XE I NTERIO R
Kubota’s new KX015-4 mini excavator raises the standard in the 1.5-2.0 tonne
category with a powerful digging force and a wider working range that rival higherend excavators. And with enhanced accessibility to sites such as roadsides or
residential areas, the KX015-4 gets the jobs done easier from large construction
areas to small places.
Photo: KX016-4
Enhanced digging force
Spacious cabin
The KX015-4 delivers an impressive bucket digging force. Its
powerful and well-balanced arm and bucket allow the
operator to dig faster and more efficiently even in the
toughest conditions.
To minimise fatigue, our new larger cabin delivers more
comfort over our previous model. It provides more legroom
with a flat floor plus an adjustable suspension seat.
Kubota original engine
The KX015-4 is powered by Kubota’s impressive D782 13 PS
engine. Engineered with the power to maximise digging and
lifting performance, it also delivers minimised noise and
vibration, meeting all current engine emission regulations.
E ASY MAINTENANC E /S
Time
a
Hour meter
C
B
Tachometer
D
A. Fuel level gauge
B. Water temperature gauge
C. Warning lamps
(overheating, hydraulic, battery)
D. LCD display (time, hour, rpm)
Easy cabin entry and exit
New digital panel
Increasing the cabin door width by 30% at the narrowest
point allows quick access to and from the cabin making
operations that require frequent exiting, such as trenching
and piping, much easier.
Following the excellence of Kubota’s Intelligent Control
System, the new digital panel puts convenience at the
operator’s fingertips. The user-friendly digital panel is
positioned to the front right corner of the operator for better
visibility, and features one-touch button operation to view
the time, hour meter and tachometer. Warning lamps with
code numbers on the display will alert you in case of
emergencies such as overheating, hydraulic problems or
low battery. Programming of the anti-theft keys can also be
easily
performed with
the digital panel.
With easier
access, simpler
settings, easyto-read
indicators and
alerts, you’ll
always be
aware of the
excavator’s
functioning
status.
Topside boom cylinder
For increased reliability
when performing in
hazardous conditions,
including demolition jobs
when a breaker is fitted, the
boom cylinder has been
positioned on the topside of
the boom to prevent
cylinder damage.
SAF E T Y / D URABILITY
B
a
C
D
E
Easy maintenance
Kubota has made routine maintenance extremely simple by consolidating
primary engine components onto one side for easier access. Engine and
other vital components can be inspected quickly and easily.
A. Air cleaner
B. Water separator
C. Fuel filter
D. Alternator
E. Starter motor
Photo: KX016-4
Integrated travel motor hoses
Kubota has enclosed the travel motor hoses within the track frame for added
protection.
Standard Equipment
Engine/Fuel system
• Double-element air cleaner
• Fuel refueling buzzer
• Extended fuel filler
Undercarriage
• 230 mm rubber track
Hydraulic system
• Pressure accumulator
• Hydraulic pressure checking ports
• Third line hydraulic direct return for AUX
• Variable displacement pump
• Straight travel circuit
Safety system
• Engine start safety system on the left
console
• Travel lock system
• Swivel lock system
• Kubota original anti-theft system
• Battery isolator
Working equipment
Canopy
• 950 mm arm
• Auxiliary hydraulic circuit piping to the
arm's end
• 1 working light on the boom
• ROPS (Roll-over Protective Structure,
ISO3471)
• TOPS (Tip-Over Protective Structure)
• OPG(Operator Protective Guard, Level 1)
• Weight-adjustable semi suspension seat
• Seatbelt
• Hydraulic pilot control levers with wrist
rests
• 12V power outlet
• Switch and harness for beacon light
• Digital panel with diagnosis function
• Front guard fixing point
Cabin
• ROPS (Roll-over Protective Structure,
ISO3471)
• TOPS (Tip-Over Protective Structure)
• OPG(Operator Protective Guard, Level 1)
• Weight-adjustable semi suspension seat
• Seatbelt
• Hydraulic pilot control levers with wrist
rests
• Cabin heater for defrosting and demisting
with air ventilation
• Emergency exit hammer
• Front window power-assisted with gas
damper
• 12V power outlet
• Location for radio
• Switch and harness for beacon light
• Digital panel with diagnosis function
• Front guard fixing point
• Side mirror
Optional Equipment
• Radio installation kit on the cabin
(Radio bracket, antenna, 2 speakers)
• 2 working lights on the cabin/canopy
• Travel pedal
• Front guard on the cabin/canopy
2250
1
3710
SPECIFICATIONS
Model
KX015-4
kg
1470 / 1420
Operating weight
Cabin / Canopy
kg
1545 / 1495
Bucket capacity, std. SAE/CECE
m3
0.035
With side teeth
mm
422
Without side teeth
mm
D782-BH
Type
Water-cooled, diesel engine
E-TVCS
PS/rpm
13 / 2300
kW/rpm
9.6 / 2300
mm
67 x 73.6
3
Number of cylinders
cc
778
rpm
9.1
Rubber shoe width
mm
230
Tumbler distance
mm
1090
Dozer size (width x height)
mm
990 x 230
20.6 (210)
P3
Gear Type
20.1 (205)
7.3 (740)
Bucket
kN (kgf)
12.7 (1300)
/min
27
Hydraulic pressure MPa (kgf/cm )
28
Hydraulic reservoir
Max. travelling
speed
Low
km/h
2.1
High
km/h
-
Ground contact
Lift Point Height
pressure
Cabin
KX015-4 canopy
Ground clearance
2
Lifting
point radius
kPa (kgf/cm
) (2m)
Canopy Over-front
kPa (kgf/cm2)
Blade Down
Blade UP
mm
kN (ton)
Lifting point radius (max.)
25.5 (0.26)
Over-front
24.5 (0.25)
Over-side
Blade Down
Blade UP
160
2.2 (0.22)
Over-side
–
–
–
–
1.7 (0.17)
1.1 (0.12)
–
–
–
Cabin,
Rubber
KX015-4
cabinversion
Lift Point Radius
kN (ton)
Lifting point radius (2m)
Lift Point Height
70
*With cabin, rubber shoe and standard arm
1.5m
3.0 (0.30)
–
2.7 (0.27)
3.4 (0.35)
*Machine
weight: with 35kg
standard bucket
fully served
1.0m
4.5 (0.46)
–
2.5 (0.25)
3.6and
(0.37)
*Operating weight: with 75kg operator, 35kg standard bucket and fully served
0.5m
5.4 (0.55)
2.6 (0.27)
2.3 (0.23)
3.4 (0.35)
0m
5.3 (0.54)
3.3 (0.33)
LIFTING
CAPACITY
10
510
21
Fuel tank capacity
950 mm arm
Unit: mm
990
20.6 (210)
2
KX15-4_2
3730
3790
450
75 / 60
450
Flow rate
deg
70
kN (kgf)
Boom swing angle (left/right)
Auxiliary circuit
3730
3790
Arm
990
Hydraulic pressure MPa (kgf/cm )
2
Max. digging force
1810
10.4
/min
1090
1450
1090
Axis of
Rotation
3710
2250
Flow rate
1810
Hydraulic pressure MPa (kgf/cm )
2
2250
16.6
/min
Flow rate
1090
1450
1090
3710
Lift Point Height
Variable displacement pump
P1, P2
Hydraulic pumps
Lift Point
240
Swivelling speed
Lift Point Radius
230
2330
990
mm
10
Canopy
2350
2350
240
mm
230
3710
Cabin
Overall length
3360
2290
mm
990
Displacement
1490
3360
2290
Bore x Stroke
Overall height
1490
510
Output ISO9249
990
Model
990
450
402
510
Bucket width
3730
3790
70
Cabin / Canopy
10
Machine weight
Engine
WORKING RANGE
*With rubber shoe type
Over-front
Blade Down
Blade UP
Over-side
Lift Point Radius
Lift Point
Lifting point radius (max.)
Over-front
Blade Down
Blade UP
Over-side
Lift Point
–
1.5m
3.0 (0.30)
3.4 (0.35)
2.5 (0.26)
–
1.0m
4.5 (0.46)
3.5 (0.36)
2.3 (0.24)
–
–
–
0.5m
5.4 (0.55)
3.3 (0.34)
2.1 (0.22)
2.6 (0.27)
1.6 (0.17)
1.1 (0.11)
–
Lift Point Height
0m
5.3 (0.54)
–
–
2.0 (0.21)
3.2 (0.32)
–
Lift Point Height
*The lifting capacities are based on ISO 10567 and do not exceed 75% of the static tilt load of the machine or 87%
of the hydraulic lifting capacities of the machine.
**The excavator bucket, hook, sling and other lifting accessories are not included on this table.
Axis of Rotation
* Working ranges are with Kubota standard bucket, without quick coupler.
* Specifications are subject to change
without
notice for purpose of improvement.
Axis
of Rotation
★ All images shown are for brochure purposes only.
When operating the excavator, wear clothing and equipment in accordance to local legal and safety regulations.
KUBOTA (U.K.) LTD
Dormer Road,Thame, Oxfordshire,
OX93UN, U.K.
Phone : 01844-268140
F a x : 01844-216685
http://www.kubota-global.net
KX
KX15-4_2
Cat. No.8792-01-UK Printed in Japan ’11-03D. 2 5
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising