Meraki Outdoor
Meraki Outdoor
Datasheet
The Meraki Outdoor is a high power indoor/outdoor access point
Meraki Outdoor
and repeater and part of the Meraki mesh networking system. It is
weatherproof, supports high-gain and directional antennas, and works
with an other Meraki repeaters to create robust, varied networking
Specifi
cations
topologies. This makes it perfect for connecting buildings or covering
large outdoor areas.
The Meraki Outdoor is a high power indoor/outdoor repeater and part of
the Meraki
mesh
networking
system.
is weatherproof,
supports
The
versatile
Meraki
Outdoor has
two It
Ethernet
ports allowing
you high-gain
to
and
directional
antennas,
and
works
with
an
other
Meraki
repeaters
to create
connect both your PC and your cable/DSL line directly to the repeater.
robust,
varied
networking
topologies.
This
makes
it
perfect
for
connecting
It also has signal strength indicators to ensure your installation goes
buildings or covering large outdoor areas wirelessly.
smoothly.
The versatile Meraki Outdoor has two Ethernet ports allowing you to connect
both your PC and your cable/DSL line directly to the repeater. It also has
Radiostrength indicators to ensure your installation goes smoothly.
Physical Dimensions (without antenna)
signal
• 200 mW (23 dBm) peak transmission power*
• 8.5” x 3.5” x 2” (216 mm x 89 mm x 50 mm)
• Enhanced receive sensitivity
• Weight: 0.55 lb (250 g)
• External RP-SMA connector
• Mounting feet included
• 802.11
Radio b/g (1 - 54 Mbps)
Physical Dimensions (without antenna)
• 2 dBi omni-directional antenna included
• 200 mW (23 dBm) peak transmission power*
• 8.5” x 3.5” x 2”
(216 mm/xPorts
89 mm x 50 mm)
Interfaces
• Enhanced receive sensitivity
• Weight: 0.55
lb (250
g) Mbps auto-crossover Ethernet ports:
• Two
10/100
• External
• Mounting feet
included detects PC or gateway operation
Power RP-SMA connector
automatically
•• 5802.11
- 22 Vb/g
DC (1 - 54 Mbps)
• Signal strength LEDs
2 dBi omni-directional
antenna
Interfaces / Ports
•• Power
Over Ethernet, 12
- 22 V included
(non 802.3af )
• Two 10/100 Mbps auto-crossover Ethernet ports:
• Power consumption: 12 W max; 3 W typical
Power
Warranty
automatically detects PC or gateway operation
• 15 V/0.8 A DC power adapter included
•
1
year hardware warranty included
5 - 22 VOver
DC Ethernet injector included
• Signal strength LEDs
•• Power
• Power Over Ethernet, 12 - 22 V (non 802.3af )
• Power consumption: 12 W max; 3 W typical
Environment
• 15
V/0.8 A DC power adapter included
Power Overtemperature:
Ethernet injector
• Operating
14° Fincluded
– 122° F (-10° C – 50° C)
• IP - 66 environmental rating
Warranty Regulatory
• FCC (USA),
CE included
(EU), IC (Canada), Anatel (Brazil), Cofetel (Mexico), C-Tick
• 1 year hardware
warranty
(Australia and New Zealand), TK (Turkey)
Regulatory• RoHS
• FCC (USA)
• CE (EU) *Max transmission power is decreased for certain geographies
• IC (Canada) to comply with regulatory requirements
• C-Tick (Australia and New Zealand)
*Max transmission power is decreased for certain geographies
to comply with regulatory requirements
Environment
• Operating temperature: 14° F – 122° F (-10° C – 50° C)
Typical
Coverage Radius
• IP
- 66 environmental
rating
• Refer to the Meraki Range Calculator
Typical Coverage Radius
• Refer to the Meraki Range Calculator
Signal Coverage
Signal
CoveragePattern
Pattern
90
120
90
60
30
150
180
330
240
300
270
30
150
0
210
60
120
0
180
210
330
240
300
270
Meraki, Inc. | 99 Rhode Island St. 2 nd Floor, San Francisco, CA 94103 | 415.632. 5800 | www.meraki.com
| 660
Meraki, Inc.
| 99
Rhode
Island St.St.,
2 nd
FlooFrancisco,
r, Sa n Francisco,
CA 94 |103
| 415.632. 58|00www.meraki.com
| www.meraki.com
Meraki,
Inc.
Alabama
San
CA 94110
415.632.5800
Part Number: 280-03200-A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising