Seats Ahead
Front Row from left: Odette, Johannes, Heather, Lindi, Dave, Michelle, Rosa, Carron
Middle Row from left: Theresa, Bennedictor, Brenda, Chounise, Candice, Shirley, Annah, Ann
Back Row from left: Yuter, Lerato, Nicolette, Shantelle, Puseletso, Albert
Kingston Range
Also Available in “Speedline”, see page 14
44 Hulbert Rd, Cnr Rosettenville Rd, New Centre, Johannesburg
PO Box 39799, Booysens, 2016
Tel: +27 11 434 0444,
www.seatsahead.co.za , www.chairexpress.co.za
Managing Director:David Howesdave@seatsahead.co.za
General Manager: Lindi Gasparlindi@chairexpress.co.za
Financial Manager: Michelle Husimichelle@seatsahead.co.za
Sales & General Enquiries:
Shantelle Foye
shantelle@seatsahead.co.za
Sales Representative: Nicolette Nel
nicolette@chairexpress.co.za
076 791 8027
Sales Representative:Candice Tatchellcandice@chairexpress.co.za
071 459 7618
Despatch Manager: Johannes Ramodike
johannes@seatsahead.co.za
Health & Safety Manager:
Johannes Ramodike
johannes@seatsahead.co.za
Visitors Arm
Medium Back
Visitors Side
High Back
Photographed in: Back: Helm Textiles - Studio - Ruby, Seat: Helm Textiles - Studio - Black
Montego Range
Also Available in “Speedline”, see page 14
Seats Ahead & Furniko:
Health and Safety Representative:
Heather Allan
heather@seatsahead.co.za
Assistant to Production Manager:
Bennedictor Mathode
bennedictor@seatsahead.co.za
Orders Clerk:Lerato Komapeorders@seatsahead.co.za
Fax Orders: 086 246 1440
Human Resources Manager: Carron Wing
carron@seatsahead.co.za
Credit Controller: Chounise Rossouw
chounise@seatsahead.co.za
Fax Admin: 086 630 6728
Chair Express:
Operations Manager: Odette Merricks
odette@chairexpress.co.za
Orders Clerk: Theresa Mphutitheresa@chairexpress.co.za
Fax Orders: 086 246 4641
Admin Manager: Rosa de Carvalho
rosa@chairexpress.co.za
Credit Controller: Chounise Rossouw
chounise@seatsahead.co.za
Fax Admin: 086 630 6728
Please note : Images in this catalogue are for representation purposes only. Colours may vary from actual product, E & OE
Medium Back
High Back
Visitors
Photographed in: Back: Helm Textiles - Studio - Midnight, Seat: Helm Textiles - Studio - Black
1
Morant PU Range
Standard without arms - see options on page 18
Also Available in “Speedline”, see page 15
Cayman Range
**Standard without arms - see options on page 18
Visitors
High Back
Medium Back
Photographed in: Back: The Mill - Coco Chenille – Amathyst
Seat: The Mill - Coco Chenille - Jet Black
Morant Chrome Range
Standard without arms - see options on page 18
Medium Back
High Back
Visitors
High Back**
Medium Back**
Visitors
Photographed in: Back: Weavers World - Vulcan - Soviet, Seat : Weavers World – Vulcan - Black
Lucea Range
Standard without arms - see options on page 18
Photographed in: Back: The Mill – Coco Chenille – Teal Seat: The Mill – Coco Chenille Jet
Morant Wood Range
Standard in Oak
High Back
Medium Back
Visitors 4 legged
2000
Visitors
3000
Photographed in: Back : Cedarbrook – Velocity – Crush, Seat : Cedarbrook – Velocity – Black
Photographed in: Back: The Mill – Coco Chenille – Paris Blue
2
Seat: The Mill – Coco Chenille - Jet Black
3
Monaco Range
High Back
Standard with 5* PU Base
Calypso Fixed Back Range
Standard without arms - see options on page 18
High Back
Medium Back
Visitors
Medium Back
Visitors
Standard with 5* PU Base
Standard with Black Powder Coated Frame
Photographed in: Back :Weavers World – Align – Plain Kiwi, Seat :Weavers World – Align – Plain Black
Photographed in: Back : Weavers World – Force – Energy, Seat : Weavers World – Force – Black
Calypso Synchro Range
Zambezi Range
Standard without arms - see options on page 18
Standard without arms - see options on page 18
High Back
Standard with 5* PU Base
Medium Back
Standard with 5* PU Base
Medium Back
High Back
Visitors
Visitors
Standard with Black Powder Coated Frame
Photographed in: Seat : Back : Weavers World – Force – Storm , Weavers World – Force – Black
4
Photographed in: Back :Weavers World – Align – Plain Weather, Seat :Weavers World – Align – Plain Black
5
Pimento Wood Range
Adda Range
Standard in Oak
Standard in Oak
Medium Back
Medium Back
High Back
High Back
Visitors
Integral Sleigh
Visitors
4 Legged
Visitors 4 Legged
Photographed in: Back and Seat: Italtan - Bonded Leather - Black
Photographed in: Back and Seat: Italtan - Bonded Leather - Black
Ombra Range
Pimento PU Range
Standard without arms - see options on page 18
Medium Back
High Back
Visitors
High Back
Photographed in: Back and Seat: Italtan - Bonded Leather - Black
6
Medium Back
Visitors
Photographed in: Back and Seat: Kaplan Quality - Black Leather
7
Salvador PU Range
Mandeville Range
Visitors
Integral Sleigh
Visitors
Medium Back
Visitors
4 Legged
Medium Back
High Back
Visitors
High Back
Photographed in: Back and Seat: Weavers World - Moo - White - 826
Photographed in: Back and Seat: Italtan - Bonded Leather - Black
Salvador Wood Range
Salvador Chrome Range with LC85 Arms
Standard in Oak
Visitors 4 Legged
Medium Back
High Back
Photographed in: Back and Seat: Italtan - Bonded Leather - Black
Visitors 4 Legged
Visitors Wood
Integral Sleigh
Medium Back
High Back
Visitors Chrome
Integral Sleigh
Photographed in: Back and Seat: Kaplan Quality - Black Leather
8
9
Venus Range
Angelo Range
Standard without arms - see options on page 18
**Standard without arms - see options on page 18
Visitors
Visitors
Medium Back
High Back
Medium Back**
High Back**
Photographed in: Seat: Weavers World - Vulcan - Mamba / Peacock / Purity
Tortuga Range
Photographed in: Back: Weavers World – Blazer – Monsoon, Seat: Weavers World – Blazer – Edinburgh
Aruba Range
Standard without arms - see options on page 18
Antigua Range
Photographed in:
Seat: Weavers World - Vulcan - Peacock
Photographed in:
Seat: Weavers World - Vulcan - Black
Operators
Standard without arms
- see options on page 18
High Back
Visitors 4 Legged
Standard with
5* PU Base
Standard with Chrome Round Tube
4 Legged Frame
Operators
Standard without arms
- see options on page 18
Trinidad Range
Standard without arms - see options on page 18
Visitors
High Back
Standard with 5* PU Base
Standard with Chrome Round
Tube Integral Sleigh Frame
Medium Back
Standard with 5* PU Base
Medium Back
Visitors
Standard with Black Powder Coated Frame
Photographed in: Back: Cedarbrook Fabrics - Concord - Polka Black, Seat: Weavers World - Smooth - Black - 82
10
Photographed in:
High Back
Back: Weavers World - Web - White
Seat: Weavers World - Web - Black
Photographed in:
Medium Back and Visitors
Back: Weavers World - Web - Black
Seat: Weavers World - Moo - White
11
Eland
Typist Range
Only Available in Oak
Standard without arms - see options on page 18
** Also Available in “Speedline”, see page 14
Lucea 1000
HEAVY DUTY UP TO 180kg
Gazelle
Only Available in Oak
Lucea 1800
Lucea 1500 **
Cancun **
Standard with 5* PU Base
Photographed in:
Back and Seat:
Weavers World – Vulcan – Sunset
Revolution Stacker
Photographed in:
Helm Textile Mills - Studio - Citrus 6820
Stacker Range
Interlinking
Photographed in:
Helm Textile Mills - Studio - Cobalt 6824
Upholstered Seat &
Plastic Back
Photographed in:
ISA - Eclipse - Frascatti
Photographed in:
Helm Textile Mills - Studio - Moss 6827
Photographed in:
Back and Seat:
Weavers World – Vulcan – Melon
Stacker Bench
Plastic Seat & Back
Belfast
Industrial Typist Range
Draughtsman Conversion with
Black Footring
Also Available in “Speedline”, see page 15
Blackpool
Bristol
502
Brixton
Standard with a Right
Hand Writing Tablet
Draughtsman Conversion with
Chrome Footring
500
Upholstered Seat & Back
Also Available in “Speedline”,
see page 15
501
Standard without arms
- see options on page 18
Standard without
Draughtsman Conversion
12
Standard without
Draughtsman Conversion
500
*Plastic Seat & Back
Available with a Right Hand Writing Tablet
*Also Available in “Speedline”, see page 15
Photographed in: Back and Seat: Weavers World - Vintage - Heston - 17
13
48 hour pick up or 5 day delivery
48 hour pick up or 5 day delivery
Cancun
Lucea
Stacker 500
Available in these 3 colours only
Available in these 3 colours only
1500
Option of an
LC 40 Arm ONLY
Option of an
LC 40 Arm ONLY
Black
MH130
Burgundy
MH199
Black
MH130
Atlantic Blue
MH123
Please order all Speedline Chairs separate from
other “normal” chairs.
Speedline is for orders smaller than 10 units. For
larger orders the standard lead time applies.
Kingston Range
Burgundy
MH199
Atlantic Blue
MH123
Please order all Speedline Chairs separate from
other “normal” chairs.
Speedline is for orders smaller than 10 units. For
larger orders the standard lead time applies.
Plastic Seat & Back
Upholstered Seat & Back
Industrial Typist Range
Brixton
Belfast
Draughtsman Conversion with
Chrome Footring
Draughtsman Conversion
with Black Footring
Standard without
Draughtsman Conversion
High Back
Visitors Arm
Medium Back
Blackpool
Visitors Side
Standard without arms
- see options on page 18
Montego Range
Standard without
Draughtsman Conversion
Bristol
Morant PU Range
Option of an LC 40 Arm ONLY
High Back
High Back
Medium Back
Medium Back
Visitors
14
Visitors
15
Spine Chair
An ergonomically correct chair is essential for good posture while seated. Simply owning an ergonomic office chair is not enough. Your chair needs
to be adjusted to suit your body proportions to improve comfort and reduce aggravation to your spine. When seated correctly in your office chair:
•
•
•
•
•
•
•
•
•
Your feet should be flat on the floor.
You should be able to easily slide your fingers underneath your legs
towards the front of the seat – Ensuring you are not cutting off circulation.
If there is more space between the seat and your legs, you must adjust
your seat upward.
You should allow about 8cm between your inner knee and the
front of the seat.
Your hips should be slightly higher than your knees.
You should sit as far back in your seat as possible so that your back and
thighs are completely supported.
You should have a good lumbar support to maintain the proper curve in
the small of your back.
You should sit close to your desk
Your elbows should be resting close to your body
Your shoulders should be relaxed
Tension Adjustment: This enables you to adjust the tension on the chair. This is the knob found underneath the chair, towards the
front of the seat. When the seat is unlocked, you are able to tilt the chair while seated. You can change the tension to be loose (so
that the chair tilts easily) or tight (so that you have to use more strength to tilt the chair). Lighter/smaller people, should have a loose
tension and heavier people should have a tighter tension. While seated on the chair, turn the knob clockwise to loosen or anticlockwise to tighten.
Gas Height Adjustment: This allows you to adjust your seat up or down. The lever is situated underneath the seat on the right hand
side. To lower the seat, sit on the chair and pull the lever upwards towards the seat. To heighten the seat, lift your body off the chair
and pull the lever upwards and adjust to desired height. For good posture, your feet should be placed flat on the ground with your
thighs and calves at a 90 degree angle.
Back Rake Adjustment: Our Lucea 1000, 1500, 1800 & Oxford Range of chairs have a back rake adjustment. This means that
the back can tilt back and forward without moving the position of the seat. The lever is situated on the right hand side, behind the
gas height lever. In a seated position, pull the lever upward while pushing back on the backrest to adjust. Once you have found a
comfortable position, release the lever and the backrest will lock in position.
Back Height Adjustment: Our Lucea 1000, 1500, 1800 & Oxford Range of chairs have a back height adjustment. This allows you to
adjust the height of the backrest upward or downward without moving the position of the seat. The knob is found behind the seat
on the left hand side. To adjust the height, in a seated position, turn the knob anticlockwise. This will loosen the backrest, allowing
you to move the backrest up or down. Once the desired position is found, tighten the knob by turning it clockwise.
The Spine Chair has the following features that assist with the above.
Photographed in:
Weavers World – Vulcan – Black
•
•
•
•
•
•
Permanent Contact Mechanism - Designed for maximum lumbar support, the backrest is set to a fixed position for support of the spine and hips of the operator.
Gas height adjuster
Lumbar Support – To support the inward curve in the small of your back
Waterfall Seat – Preventing poor circulation to your lower legs.
Firm high density foam - For a comfortable seat
Adjustable Arm Rests
Draughtsman Conversion: This is a gas spindle that is higher than normal gas spindles. These are fitted to chairs that need a seat
height higher than normal. I.E. a draughtsman’s table / laboratory table. It works the same as a conventional gas. These can only be
fitted to operator’s chairs and some mid back chairs. This gas spindle cannot be fitted to any high back chairs, chairs with forward
pivot mechanisms or chairs with synchro mechanisms. The maximum seat height is 850mm once fitted to a chair.
Swivel & tilt mechanism: This mechanism allows you to tilt the chair whilst seated or lock the chair in an upright position. To lock
the chair, use the lever underneath the seat on the right hand side (same lever for gas height adjustment), push it in towards the
centre of the chair. To unlock the chair, pull the lever outward away from the seat.
Forward Pivot: This mechanism allows you to tilt the seat whilst keeping your feet on the floor, providing a more natural and controlled feeling. You are able to lock the chair in 5 tilted positions. To lock the chair in your desired position, use the lever on the left
hand side of the chair by pulling the lever upward towards the seat. To unlock the chair, push the same lever back down towards
the floor and push back on the backrest with your body. The forward pivot mechanisms have an “anti-shock” facility, this means
that you aren’t thrown forward when the mechanism is unlocked and that is why you have to push back on the seat to unlock it.
Texas
20mm Thick Heavy Duty Plywood Shell
Extra Firm High Desnsity Foam Seat
Seat Width: 600mm
Seat Depth: 540mm
Heavy Duty Double Castors
Photographed in:
Back: The Mill – Bold - Black
Seat: The Mill - Work It - Black
16
Standard without arms
For structural and guarantee purposes, this
chair must be ordered with arms
- see options on page 18
Texas High Back
Heavy Duty
Takes up to 150kg
24 Hour usage
Synchro Mechanism: This mechanism allows you to adjust and lock the chair in your desired position. You can fix or free float the
angle of the seat and back together. For every one degree the seat tilts, the back rest tilts two degrees. To lock the chair in your
desired position, use the lever on the left hand side of the chair by pulling the lever upward towards the seat. To unlock the chair,
push the same lever back down towards the floor and push back on the backrest with your body. The Synchro mechanisms have
an “anti-shock” facility, this means that you aren’t thrown forward when the mechanism is unlocked and that is why you have to
push back on the seat to unlock it.
Middle Pivot Synchro Mechanism: This mechanism allows you to adjust and lock the chair in your desired position. You can fix or
free float the angle of the seat and back together. For every one degree the seat tilts, the back rest tilts two degrees. To lock the
chair in your desired position, use the lever on the right hand side of the chair by pushing the lever towards the front of the chair. To
unlock the chair, pull the same lever back towards the back of the chair and push on the backrest with your body. The Middle Pivot
Synchro mechanisms have an “anti-shock” facility, this means that you aren’t thrown forward when the mechanism is unlocked and
that is why you have to push back on the seat to unlock it.
The Permanent Contact Mechanism: This mechanism is used on the Spine Chair. This mechanism allows for the adjustment of
the backrest, tilting back and forward without moving the position of the seat. This Lever is situated on the right hand side, behind
the gas height lever. In a seated position, pull the lever upward while pushing back on the backrest to adjust. Once you have
found a comfortable position, release the lever and the backrest will lock in position.
17
Mechanisms
LC 15
Polyurethane Pad
LC 30
Slimline Wood
LC 35
Slimline Polyurethane
LC 85 - Solid Arm with
Polyurethane Pad
LC 60
LC 40
LC 50
LC 95 - Adjustable Arm
Back Rake Adjustment
Swivel & Tilt
Kneetilt
Middle Pivot Synchro
Kneetilt Synchro
Permanent Contact Mechanism
LC 100
Base Options
LC 120 - Solid
Aluminium Chrome Arm
LC 15
Polyurethane
Pad
LC 30
Slimline
Wood
LC 35
Slimline
Polyurethane
LC 130 Double Chrome
Bars with PU insert
LC 40
LC 50 LC 60
LC 85
PU Pad
LC 150
LC 95
Adjustable
Arm
LC 100
LC 120
Solid Arm
LC 30
Double Bars
LC
150
Angelo Range
Antigua Operators
Black Nylon
Polished Aluminium
Chrome “Normal”
Wooden Spider
Black Nylon Spider
Polished Aluminium Spider Base
Aruba Range
Blackpool Ind. Typist
Calypso Synchro Range
Calypso Fixed Back Range
Cancun Typist
Cayman Range
Lucea Range
Mandeville
Morant Range
Ombra Range
Salvador Range
Texas Chair
Tortuga Operators
Draughtsman conversion with
Chrome foot ring
Draughtsman conversion with
Black Nylon foot ring
Trinidad Range
Venus range
Zambezi Range
18
19
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising