Ag Leader® Integra, Versa, and Compass Version 6.6 Firmware

Ag Leader® Integra, Versa, and Compass Version 6.6 Firmware
Ag Leader® Integra, Versa, and Compass Version 6.6 Firmware
Release
Ag Leader Technology is pleased to announce the release of new firmware. Features and
improvements in this version are listed below. This free upgrade is available for download
from http://www.agleader.com.
IMPORTANT!
A. Upgrading to version 6.6 is only possible if display is currently on version 4.5 or greater. If on prior version, you must
first upgrade to 4.5.
B. It is recommend that a backup be created prior to upgrading display firmware
C. SMS version 15.2 is required to read .agdata or .agsetup files from version 6.6
New in 6.6
General (Ag Leader Integra, Versa, Compass)




NEW: Chinese language for on screen text. English keyboard for user input
NEW: On screen heading button to change mapping between forward and reverse
(Figure 1)
ENHANCED: Vehicle/implement modeling when making 3 point turns and backing
into corners for all implements
ENHANCED: Increased maximum metric row spacing to 300 cm
DirectCommand (Ag Leader Integra, Versa)




FIXED: Empty spreader bin with spinners disabled using manual valve control
FIXED: Application Report maps using Direct Injection
FIXED: Mapping issues switching Hardi SafeTrack between auto and manual
FIXED: Crash importing Product Mix from SMS containing certain products
Harvest (Ag Leader Integra, Versa)

ENHANCED: Display units of lbs/acre when harvesting fescue and clover grass
GPS and Guidance (Ag Leader Integra, Versa, Compass)


ENHANCED: Warning when GPS differential becomes degraded running StableLoc
FIXED: Crash when reset to defaults performed on GPS1500
Figure 1 – Heading Change Button
New in 6.4
General (Ag Leader Integra, Versa)

FIXED: Increased character limit for product names
GPS and Guidance (Ag Leader Integra, Versa, Compass)



ENHANCED: StableLoc with GPS 6000/6500 to eliminate position drift on startup
FIXED: Upgrading Relay in select foreign languages (Danish, Dutch, Croatian, Czech,
Spanish, Swedish, Polish)
FIXED: GLIDE initialization on startup with GPS 6000
New in 6.3
GPS and Guidance






NEW: StableLoc Error Limit user defined accuracy setting (Figure 2)
NEW: GPS Diagnostics: Throughput and Estimated Error (Figure 3)
NEW: GPS Diagnostics: RTK Convergence indicator (Figure 4)
ENHANCED: FW3 simplified upgrading of GPS 6500/6000 and Relays
FIXED: Guidance patterns unload without saving when not accepted by steering
controller
NOTE: GPS 6500 enhancements require version 6.61. After devices are upgraded
you must press “Reset to Defaults” in GPS setup.
Figure 2 - StableLoc Error Limit Setting
Figure 3 - Improved GPS Diagnostics
Converged
Converging
Figure 4 - RTK Convergence Indicator
Not Converging
New in 6.2
General (Ag Leader Integra, Versa, Compass)

NEW: Turkish language
SeedCommand (Ag Leader Integra, Versa)


ENHANCED: Turn Compensation controlling Kinze 4900 Electric Drive planter
FIXED: 1-2 Channel Hydraulic Down Force pressure drop when stopping mid-pass
GPS and Guidance (Ag Leader Integra, Versa, Compass)




NEW: Update RTK Relay firmware via display
NEW: NMEA Talker – GPS 6500 and GPS 6000 compatible with Water Management
and legacy systems
ENHANCED: GPS 6500 diagnostics
FIXED: Guidance line not reloading on power cycle running Virtual Terminal
DirectCommand (Ag Leader Integra, Versa)



NEW: Ag Leader ISO Liquid Control in North America
NEW: Raven ISO Injection Pump interface with Ag Leader ISO Liquid Control
ENHANCED: Vehicle/implement modeling when making 3 point turns and backing
into corners
New in 6.0
GPS and Guidance (Ag Leader Integra, Versa, Compass)




NEW: SteerCommand automated steering system
NEW: GPS 6500 receiver (GLIDE, WAAS/EGNOS, TerraStar, RTK)
NEW: RTK modules: Relay 400, Relay 900, Relay CDMA, Relay GSM
NEW: GPS 6000 receiver (GLIDE, WAAS/EGNOS)
DirectCommand (Ag Leader Integra, Versa)




NEW: Container Sequencing for Spinner Spreader Configurations. Apply the same
product sequentially from multiple containers. Ag Leader Integra only. (Figure 5 and
6)
NEW: Automatically advance through Container Sequences when product container is
low or empty. (Figure 5)
NEW: ISOBUS Serial Application Rate module protocols: Bogballe Calibrator ICON and
Calibrator 2003, UNIA Group BRZEG, Reco/Sulky Vision-X, Kuhn Quantron, LH Agro
LH5000, RDS Pro.
ENHANCED: View level and interact with granular product containers in mass-based
units (lb/kg)
Harvest (Ag Leader Integra, Versa)

ENHANCED: Quantimeter support for Lexion 780 models
Intellislope (Ag Leader Integra, Versa)


ENHANCED: Display unlocked via firmware, system price remains unchanged. Use
module with any Ag Leader Integra display.
FIXED: Display performance issues installing tile in large fields
Figure 5: Configuring Container Sequencing
Figure 6: Map Screen with Sequenced Containers
Instructions for updating:
1. Copy the latest upgrade file to your external USB drive. It will have a .fw2
file extension.
2. Insert the external USB drive in the display.
3. Press
4. Then press
5. When the upgrade dialog box appears, select the .fw2 upgrade file, then
press
6. A window will appear and will state that “The upgrade is ready to install”.
It will also warn, “Do not disconnect power” and press
7. Display will cycle power automatically
8. The display will progress through the upgrade steps, the display will
automatically power cycle during the upgrade.
The upgrade is now complete
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising